Search Results (6,578)

In this work, the microstructure and mechanical properties of the FeAlCrNiV complex concentrated alloy (CCA) were studied in the as-cast and annealed states. The material was annealed at 800 °C for 16 days to test microstructure stability and phase evolution. It was found that the microstructure does not differ in the two investigated states, and the results of differential scanning calorimetry and dilatometry showed that there is almost no difference in the thermal response between the as-cast and annealed states. Both investigated states exhibit eutectic structure with bcc solid solution and ordered phase with B2 symmetry. In a single grain, several regions with B2 laths in the bcc matrix were observed. Inside the B2 laths and in the bcc matrix, bcc spheres and B2 spheres were observed, respectively. All three features—laths, matrix and spheres—are fully crystallographically coherent. Nevertheless, in the adjacent region in the grain, the crystal structure of the matrix, laths and sphere changed to the other structure, i.e., the characteristics of the microstructure feature with B2 symmetry changed to bcc, and vice versa. Compression deformation tests were performed for various temperatures from room temperature to 800 °C. The results showed that the material exhibits exceptional yield stress values, especially at high temperatures (820 MPa/800 °C), and excellent plasticity (25%). Full article

Reactions of the angular 4,4′-oxybis[N-(pyridin-3-ylmethyl)benzamide] (L) with dicarboxylic acids and transition metal salts afforded non-entangled {[Cd(L)(1,3-BDC)(H₂O)]∙2H₂O}_n (1,3-BDC = 1,3-benzenedicarboxylic acid), 1; {[Cd(L)(1,4-HBDC)(1,4-BDC)_0.5]∙2H₂O}_n (1,4-BDC = 1,4-benzenedicarboxylic acid), 2; {[Cu₂(L)₂(1,3-BDC)₂]∙1.5H₂O}_n, 3; {[Ni(L)(1,3-BDC)(H₂O)]∙2H₂O}_n, 4; {[Zn(L)(1,3-BDC)]∙4H₂O}_n, 5; {[Zn(L)(1,4-BDC)]∙2H₂O}_n, 6; and [Cd₃(L)₂(1,4-BDC)₃]_n, 7, which have been structurally characterized by using single-crystal X-ray diffraction. Complexes 1–5 and 7 are 2D layers, giving (6⁴·8·10)(6)-2,4L3, (4²·8²·10²)(4²·8⁴)₂(4)₂, (4·5·6)(4·5⁵·6³·7)-3,5L66, (6⁴·8·10)(6)-2,4L3, interdigitated (8⁴·12²)(8)₂-2,4L2 and (3⁶·4⁶·5³)-hxl topologies, respectively, and 6 is a 1D chain with the (4³·6²·8)(4)-2,4C3 topology. The factors that govern the structures of 1–7 are discussed and the thermal properties of 1–7 and the luminescent properties of complexes 1, 2, 5 and 6 are investigated. The stabilities of complexes 1 and 5 toward the detection of Fe³⁺ ions are also evaluated. Full article

Mixing enthalpy (ΔH_mix), mixing entropy (ΔS_mix), atomic-size difference (δ), and valence electron concentration (VEC) are the indicators determining the phase structures of multi-principal element alloys. Exploring the relationships between the structures and properties of multi-principal element films is a fundamental study. TiZrHf films with a ΔH_mix of 0.00 kJ/mol, ΔS_mix of 9.11 J/mol·K (1.10R), δ of 3.79%, and VEC of 4.00 formed a hexagonal close-packed (HCP) solid solution. Exploring the characterization of TiZrHf films after solving Ta, Y, and Cr atoms with distinct atomic radii is crucial for realizing multi-principal element alloys. This study fabricated TiZrHf, TiZrHfTa, TiZrHfY, and TiZrHfCr films through co-sputtering. The results indicated that TiZrHfTa films formed a single body-centered cubic (BCC) solid solution. In contrast, TiZrHfY films formed a single HCP solid solution, and TiZrHfCr films formed a nanocrystalline BCC solid solution. The crystallization of TiZrHf(Ta, Y, Cr) films and the four indicators mentioned above for multi-principal element alloy structures were correlated. The mechanical properties and thermal stability of the TiZrHf(Ta, Y, Cr) films were investigated. Full article

Nickel-based superalloys are widely utilized in critical hot-end components, such as aeroengine turbine blades, owing to their exceptional high-temperature strength, creep resistance, and oxidation resistance. During service, these components are frequently subjected to complex localized loading, leading to non-uniform plastic deformation and microstructure evolution within the material. Combining nanoindentation experiments with the crystal plasticity finite element method (CPFEM), this study systematically investigates the effects of loading rate and crystal orientation on the elastoplastic deformation of DD6 alloy under spherical indenter loading. The results indicate that the maximum indentation depth increases and hardness decreases with prolonged loading time, exhibiting a significant strain rate strengthening effect. The CPFEM model incorporating dislocation density effectively simulates the nonlinear characteristics of the nanoindentation process and elucidates the evolution of dislocation density and slip system strength with indentation depth. At low loading rates, both dislocation density and slip system strength increase with loading time. Significant differences in mechanical behavior are observed across different crystal orientations, which correspond to the extent of lattice rotation during texture evolution. For the [111] orientation, crystal rotation is concentrated and highly regular, while the [001] orientation shows uniform texture evolution. This demonstrates that anisotropy governs the deformation mechanism through differential slip system activation and texture evolution. Full article

Stoichiometric single crystals of Mn₄Al₁₁ were synthesized from the elements using Sn as a flux. The crystal structure of Mn₄Al₁₁ was investigated using single crystal X-ray diffraction and showed a complex triclinic structure with a relatively small unit cell and interpenetrating networks of Mn and Al atoms. While our results generally agree with the previously reported data in the basic structure features such as triclinic symmetry and structure type, the atomic parameters differ significantly, likely due to different synthetic techniques producing off-stoichiometry or doped crystals used in the previous works. Our structural analysis showed that the view of the Mn substructure as isolated zigzag chains is incomplete. Instead, the Mn chains are coupled in corrugated layers by long Mn-Mn bonds. The high quality of the crystals with the stoichiometric composition also enabled us to study magnetic behavior in great detail and reveal previously unobserved magnetic ordering. Our magnetization measurements showed that Mn₄Al₁₁ is an antiferromagnet with T_N of 65 K. The presence of the maximum above T_N also suggests strong local interactions indicative of low-dimensional magnetic behavior, which likely stems from lowered dimensionality of the Mn substructure. Full article

The advent of quantum computing poses an existential threat to the security of cloud services that handle sensitive visual data. Simultaneously, the need for computational privacy requires the ability to process data without exposing it to the cloud provider. This paper introduces and evaluates a hybrid quantum-resistant framework that addresses both challenges by integrating NIST-standardized post-quantum cryptography with optimized fully homomorphic encryption (FHE). Our solution uses CRYSTALS-Kyber for secure channel establishment and the CKKS FHE scheme with SIMD batching to perform image processing tasks on a cloud server without ever decrypting the image. This work provides a comprehensive performance analysis of the complete, end-to-end system. Our empirical evaluation demonstrates the framework’s practicality, detailing the sub-millisecond PQC setup costs and the amortized transfer of 33.83 MB of public FHE materials. The operational performance shows remarkable scalability, with server-side computations and client-side decryption completing within low single-digit milliseconds. By providing a detailed analysis of a viable and efficient architecture, this framework establishes a practical foundation for the next generation of privacy-preserving cloud applications. Full article

Polymicrobial biofilms involving fungal and bacterial species are increasingly recognized as contributors to persistent infections, particularly in the oral cavity. Candida albicans and Aggregatibacter actinomycetemcomitans are two commensals that can turn into opportunistic pathogens and are able to form robust biofilms. Objectives: This study aimed to assess the interaction dynamics between these two microorganisms and to evaluate their susceptibility to fluconazole and azithromycin in single- and mixed-species forms. Methods: Biofilm biomass was quantified using crystal violet assays, while biofilm cell viability was assessed through CFU enumeration (biofilm viability assay). To assess the resistance properties of single versus mixed-species coincubations, we applied the antimicrobial susceptibility test (AST) to each drug, and analysed spatial organization with confocal laser scanning microscopy, using PNA-FISH. Results: The results indicated that both species can coexist without significant mutual inhibition. However, a non-reciprocal synergism was also observed, whereby mixed-species biofilm conditions promoted the growth of A. actinomycetemcomitans, while C. albicans growth remained stable. As expected, antimicrobial tolerance was elevated in mixed cultures, likely due to enhanced extracellular matrix production and potential quorum-sensing interactions, contributing to increased resistance against azithromycin and fluconazole. Conclusions: This study provides novel insights into previously rarely explored interactions between C. albicans and A. actinomycetemcomitans. These findings underscore the importance of investigating interspecies interactions within polymicrobial biofilms, as understanding their mechanisms, such as quorum-sensing molecules and metabolic cooperation, can contribute to improved diagnostics and more effective targeted therapeutic strategies against polymicrobial infections. Full article

This study proposes a coupled constitutive model that captures the anisotropic failure characteristics and damage evolution of nickel-based single-crystal (SX) superalloys under various temperature conditions. The model accounts for both creep rate and material damage evolution, enabling accurate prediction of the typical three-stage creep curves, macroscopic fracture morphologies, and microstructural features under uniaxial tensile creep for specimens with different crystallographic orientations. Creep behavior of SX superalloys was simulated under multiple orientations and various temperature-stress conditions using the proposed model. The resulting creep curves aligned well with experimental observations, thereby validating the model’s feasibility and accuracy. Furthermore, a finite element model of cylindrical specimens was established, and simulations of the macroscopic fracture morphology were performed using a user-defined material subroutine. By integrating the rafting theory governed by interfacial energy density, the model successfully predicts the rafting morphology of the microstructure at the fracture surface for different crystallographic orientations. The proposed model maintains low programming complexity and computational cost while effectively predicting the creep life and deformation behavior of anisotropic materials. The model accurately captures the three-stage creep deformation behavior of SX specimens and provides reliable predictions of stress fields and microstructural changes at critical cross-sections. The model demonstrates high accuracy in life prediction, with all predicted results falling within a ±1.5× error band and an average error of 14.6%. Full article

Currently, the trade-off between oxygen permeation flux and structural stability in conventional perovskite oxides restricts the practical application of oxygen permeable membranes. In this study, a high-entropy design was applied to the B-site of BSCF matrix materials, resulting in the successful synthesis of a high-entropy perovskite, Ba_0.5Sr_0.5Co_0.71Fe_0.2Ta_0.03Ni_0.03Zr_0.03O_3−δ. The crystal structure, microstructure, and elemental composition of the material were systematically characterized and analyzed. Theoretical analysis and experimental characterization confirm that the material exhibits a stable single-phase high-entropy perovskite oxide structure. Under He as the sweep gas, the membrane achieved an oxygen permeation flux of 1.28 mL·cm⁻²·min⁻¹ and operated stably for over 100 h (1 mm thick, 900 °C). In a 20% CO₂/He atmosphere, the flux remained above 0.92 mL·cm⁻²·min⁻¹ for over 100 h, demonstrating good CO₂ tolerance. Notably, when the sweep gas is returned to the pure He atmosphere, the oxygen permeation flux fully recovers to 1.28 mL·cm⁻²·min⁻¹, with no evidence of leakage. These findings indicate that the proposed B-site doping strategy can break the trade-off between oxygen permeability and structural stability in conventional perovskite membranes. This advancement supports the industrialization of oxygen permeable membranes and offers valuable theoretical guidance for the design of high-performance perovskite materials. Full article

The pressure response and structural stability of fluoranthene crystals up to 8 GPa are investigated using Raman spectroscopy. The vast majority of the Raman peaks upshift with pressure, either sublinearly (intermolecular modes) or quasilinearly (intramolecular modes), reflecting the bond hardening upon volume contraction. The frequency shifts, accompanied by intensity redistribution among the Raman peaks, are by far larger for the former than those for the latter vibrations, compatible with their nature: weak intermolecular van der Waals interactions and strong intramolecular covalent bonds. For pressures higher than 2 GPa, changes in the linear pressure coefficients of the Raman peak frequencies, mainly towards lower values, are observed. These are more pronounced for intermolecular and C–H stretching vibrations. For P > 4.7 GPa, the pressure coefficients are further reduced, while all the observed pressure-induced changes are fully reversible upon pressure release. These changes may be interpreted either as two structural transitions at ~2 and ~4.7 GPa or as a single, but sluggish, structural phase transition in the pressure range 2–4.7 GPa, featuring the reorientation and different stacking of the molecules. From the high-pressure Raman data in the low-pressure phase, a bulk modulus of ~7 GPa at ambient pressure is estimated for solid fluoranthene. Full article

This work presents a comprehensive study of the structural, luminescent, and photoconversion properties of epitaxial composite phosphor converters based on single crystalline films of Ce³⁺-activated Ca_2−xY_1+xMg_1+xSc_1−xSi₃O₁₂:Ce (x = 0–0.25) (CYMSSG:Ce) garnet, grown using the liquid phase epitaxy (LPE) method on single-crystal Y₃Al₅O₁₂ (YAG) and YAG:Ce substrates. The main goal of this study is to elucidate the structure–composition–property relationships that influence the photoluminescence and photoconversion efficiency of these film–substrate composite converters, aiming to optimize their performance in high-power white light-emitting diode (WLED) applications. Systematic variation in the Y³⁺/Sc³⁺/Mg²⁺ cationic ratios within the garnet structure, combined with the controlled tuning of film thickness (ranging from 19 to 67 µm for CYMSSG:Ce/YAG and 10–22 µm for CYMSSG:Ce/YAG:Ce structures), enabled the precise modulation of their photoconversion properties. Prototypes of phosphor-converted WLEDs (pc-WLEDs) were developed based on these epitaxial structures to assess their performance and investigate how the content and thickness of SCFs affect the colorimetric properties of SCFs and composite converters. Clear trends were observed in the Ce³⁺ emission peak position, intensity, and color rendering, induced by the Y³⁺/Sc³⁺/Mg²⁺ cation substitution in the film converter, film thickness, and activator concentrations in the substrate and film. These results may be useful for the design of epitaxial phosphor converters with tunable emission spectra based on the epitaxially grown structures of garnet compounds. Full article

Transition-metal and rare-earth element co-doped ZnO nanoparticles have attracted significant attention due to their potential applications in spintronics and optoelectronics. In this study, Zn_0.95Co_0.01EuxO (x = 0.01–0.05) nanoparticles were synthesized using the sol–gel technique. The estimated stress, strain, and crystallite sizes of the synthesized Co/Eu co-doped ZnO nanoparticles were calculated using the Williamson–Hall method, and their electron spin resonance (ESR) properties were investigated to examine the effect on their magnetic and structural properties. X-ray diffraction (XRD) analysis confirmed the presence of a single-phase structure. Surface morphology, elemental composition, crystal quality, defect types, density, and magnetic behavior were characterized using scanning electron microscope (SEM), electron-dispersive spectroscopy (EDS), and ESR techniques, respectively. The effect of Eu concentration on the linewidth (ΔBpp) and g-factor in the ESR spectra was studied. By correlating ESR results with the obtained structural properties, room-temperature ferromagnetic behavior was identified. Full article

A novel total internal reflection solar end-pumped laser system has been introduced for the first time, aimed at enhancing the solar-to-laser conversion efficiency. Utilizing a conical solid or cavity reflector, this system refocuses sunlight from a 0.2818 $m^2$ parabolic mirror into a single Ce (0.05 at.%): Nd (1 at.%): YAG crystal rod, measuring 4 mm in diameter and 10 mm in length, thereby promoting total internal reflection and extending the pumping path. Simulation results indicate that under the same solar input power conditions (249.05 W), the conversion efficiencies of the conical solid reflector and cavity reflector systems are 1.2 times and 1.33 times higher than the current highest recorded efficiency of single-rod systems, respectively. At 950 ${W/m}^2$, the conical reflector reaches 5.48% efficiency, while the cavity reflector attains 6.09%. Their collection efficiencies are 52.03 ${W/m}^2$ and 57.90 ${W/m}^2$, with slope efficiencies of 6.65% and 7.72%. Full article

In this study, three new terphenyl-substituted NPN ligands bearing pyridyl groups, two phosphonites and one diaminophosphine, were synthesized and fully characterized. Their coordination chemistry with copper(I) was investigated using CuBr and [Cu(NCMe)₄]PF₆ as metal precursors, affording six mononuclear Cu(I) complexes, which were characterized using NMR spectroscopy and, in selected cases, single-crystal X-ray diffraction (SCXRD) analysis. The NPN ligands adopt a κ³-coordination mode, stabilizing the copper centers in distorted tetrahedral geometries. The catalytic performance of these complexes in the S-arylation of thiols with aryl iodides was evaluated. Under optimized conditions, complexes 2a and 2b exhibited excellent activity and broad substrate scope, tolerating both electron-donating and electron-withdrawing groups, as well as sterically hindered and heteroaryl substrates. The methodology also proved effective for aliphatic thiols and demonstrated high chemoselectivity in the presence of potentially reactive functional groups. In contrast, aryl bromides and chlorides were poorly reactive under the same conditions. These findings highlight the potential of well-defined Cu(I)–NPN complexes as efficient and versatile precatalysts for C–S bond formation. Full article

In this article, an efficient and straightforward protocol for the construction of complex dispirocyclic skeletons via regioselective intramolecular Michael addition is presented. Diverse dispirocyclic compounds were synthesized under mild and transition-metal-free conditions with good to excellent yields. Most stereoisomers were conveniently separated by column chromatography, and their relative configurations were identified by single-crystal X-Ray diffraction of representative compounds. A scale-up experiment validated the practicality of this method. In an in vitro assay, some dispirocyclic compounds exhibited potent cytotoxicity with an IC₅₀ value of 10⁻⁶ mol/L. Full article