Search Results (3,435)

Water scarcity in semi-arid regions threatens seed germination and early crop establishment, driving the development of biodegradable Nature-based Solutions to replace synthetic plastic mulches. Porous cellulose membranes were fabricated from rice husk (RH), banana pseudostem (BP), and sugarcane bagasse (SB) by thermo-chemical extraction and high-shear homogenization (n = 5 replicates per membrane type). Membranes were characterized by ATR-FTIR and scanning electron microscopy, confirming removal of non-cellulosic components and biogenic silica preservation in RH, and revealing biomass-dependent porous architectures linked to mechanical and transport behavior. RH produced the most compact fibrillar matrix (compressive strength: 8.16 ± 0.24 MPa; WVT: 170 ± 60 g m⁻² day⁻¹), BP an open interconnected network with superior deformability (9.83 ± 0.25% elongation) and moisture transport (WVT: 400 ± 100 g m⁻² day⁻¹), and SB the highest moisture-retention capacity (215.7 ± 15.8%). Germination assays with Brassica oleracea var. botrytis under water stress showed SB achieved the highest germination rate (90.5 ± 0.99%), confirming that sustained moisture availability governs germination more decisively than transport rate alone. Soil burial tests confirmed biodegradable behavior across all membranes (R² ≥ 0.995; k = 0.043–0.046 day⁻¹). These findings establish a hydrogen-bond-mediated structure–property–function framework for designing biomass-specific cellulose membranes as biodegradable solutions for water-limited agricultural systems. Full article

This paper presents a three-dimensional generalization of the M-integral, formulated as an interaction integral based on a bilinear strain energy density, for the mixed-mode decoupling of crack front energies in finite structural components. The proposed $M_{\theta }^{3D}$ integral combines real and virtual mechanical fields within a local spherical reference frame, enabling the separate evaluation of mode I (opening), mode II (in-plane shear) and mode III (out-of-plane shear) energy release rates along arbitrary crack front lines. The theoretical framework, derived from Noether’s theorem and the virtual work principle, is implemented in the Cast3M finite element code using a toroidal integration domain with a local theta weighting function. Numerical validations are conducted on the Mixed-Mode Crack Growth (MMCG) specimen, a geometry representative of structural components subjected to combined tension and shear. Three key findings are demonstrated: (i) practical domain independence is achieved for all three fracture modes; (ii) the three-dimensional approach converges to the plane-stress solution for thin specimens and reveals significant deviations from plane-strain assumptions; (iii) even under nominally mode I + II loading, a non-negligible mode III component emerges due to Poisson-induced out-of-plane effects, with magnitude increasing at free surfaces and for thicker geometries. These results indicate that finite-thickness and out-of-plane effects can significantly affect the partition of fracture energy between modes. For the MMCG configuration investigated here, the three-dimensional formulation shows the limitations of two-dimensional assumptions and provides an energetic basis for the analysis of mixed-mode fracture in finite-thickness components. Full article

The design of intravascular ultrasound (IVUS) catheters involves inherently coupled acoustic, hemodynamic, and structural requirements. Existing design strategies, which often rely on empirical geometric refinement or single-physics optimization, are limited in their ability to simultaneously ensure acoustic transmission efficiency, flow compatibility, and mechanical reliability. A multiphysics topology optimization method for the integrated design of IVUS catheters under acoustic–fluid–structure interactions is proposed in this paper. A density-based design variable is introduced to characterize the material distribution within the design domain, and consistent interpolation schemes are employed to relate this variable to the effective acoustic properties in the Helmholtz equation, the Brinkman penalization coefficient in the incompressible Navier–Stokes equations, and the elastic stiffness tensor in the structural equilibrium equation. The optimization problem is formulated as a normalized multi-objective minimization of acoustic transmission loss, flow resistance, and structural compliance, subject to constraints on material volume, received acoustic energy, wall shear stress, and structural displacement. Density filtering and smooth Heaviside projection are incorporated to regularize the design field and promote well-defined material boundaries. An adjoint sensitivity formulation is further developed to enable efficient gradient evaluation for the coupled system. Compared with the initial design, the average acoustic transmission efficiency has increased by $59.01\%$, the shear stress has decreased by $53.87\%$, and the stiffness matching rate has reached $98.27\%$. The objective function converged after 35 iterations, demonstrating the numerical stability of the proposed acoustic–fluid–structure topology optimization framework. Full article

Flow-cell ultrasonication of gelatinized rice flour slurries alters cultivar-dependent water solubility, viscosity, and retrogradation of pregelatinized rice flour, properties important for plant-based beverages and convenience foods. We tested whether cultivar-level composition descriptors, amylose, protein, and fiber, can represent cultivar-associated variation in ultrasonication responses while separating process-only prediction, within-domain cultivar representation, and unseen-cultivar transfer. Six rice cultivars were processed across nine amplitude-time combinations and two slurry concentrations. Water solubility index, apparent viscosity at a shear rate of 50 s⁻¹, and setback viscosity were modeled using ElasticNet, partial least squares regression, support vector regression, random forest, and extreme gradient boosting. Three input formulations were compared: process variables alone, process variables plus composition descriptors, and process variables plus cultivar identity. Repeated nested group cross-validation showed insufficient process-only prediction and substantial improvement from composition descriptors. Within-domain validation showed comparable composition-descriptor and cultivar-identity performance under nonlinear algorithms. However, because cultivar identity is undefined for absent cultivars, leave-one-cultivar-out transfer of the composition-descriptor model remained uncertain. Cross-fitted Shapley additive explanations showed predictions used process and composition variables. For the validated cultivar-process domain, this approach can screen cultivar-process combinations for beverage and convenience-food applications, but replacing categorical source identifiers with continuous descriptors requires explicit transfer validation. Full article

To address the critical challenge of 0–100 Hz low-frequency vibration control for marine hydraulic pipelines, this paper proposes a dedicated fiber-reinforced magnetorheological elastomer (MRE) isolator and a genetic algorithm-optimized fuzzy control strategy utilizing the magnetically tunable properties of MREs. An upper-lower split-type isolator is designed to suppress axial and radial vibrations through the shear and Compression Modes of MRE, respectively, and a two-degree-of-freedom (2-DOF) dynamic model is established to analyze the effects of mass ratio and natural frequency ratio on the system’s amplitude magnification factor. A Mamdani-type fuzzy controller, with acceleration error and its rate of change as inputs and control voltage as output, is optimized via a genetic algorithm. Simulation and experimental results show that 31–56.5% amplitude attenuation is achieved under 25–35 Hz single-frequency excitation; 12 dB isolation in the 5–23 Hz band at the input end and a maximum 15 dB isolation in multiple bands for the suspended pipeline section are obtained without external forced excitation; and efficient 0–100 Hz full-band isolation is realized at an applied current of 1.5 A. This work verifies the effectiveness of the proposed scheme for low-frequency vibration control of marine hydraulic pipelines. Full article

This study investigates the reliability of power-terminal solder joints in intelligent power modules (IPMs) subjected to thermal cycling, random vibration, and packaging/assembly-induced deformation. Fifty IPMs were tested under temperature cycling from −55 °C to 125 °C and random vibration from 20 to 2000 Hz, and the experimental observations were combined with finite element simulations of thermal, vibration, and deformation loads. The modules survived 200 temperature cycles in the free state, whereas functional abnormalities occurred after board-level assembly and subsequent environmental loading. Simulation results showed that random vibration produced limited solder-layer stress because the first structural mode was above the excitation range, while packaging and PCB deformation markedly increased the initial stress of the power-terminal solder joints. When local deformation reached approximately 0.5 mm, the calculated solder-pad stress reached or exceeded the shear-strength risk range, consistent with the failure tendency observed in highly deformed modules. Weibull analysis further indicated a fatigue-dominated failure process with an increasing failure rate. These findings suggest that deformation control, package stiffness improvement, and assembly flatness management are critical for improving the reliability of IPM power-terminal solder joints. Full article

Preterm infants, especially extremely preterm infants under 28 weeks of gestation, face high mortality rates due to respiratory distress resulting from pulmonary immaturity. Conventional mechanical ventilation and extracorporeal membrane oxygenation (ECMO) therapy inevitably cause irreversible lung injury or severe complications, respectively. Here, we developed a microfluidic oxygenator (MO) mimicking the human alveolar-capillary barrier to provide respiratory support for preterm infants. These structures promoted uniform flow distribution, reduced high-shear stress and flow stagnation, and improved gas exchange efficiency. In vitro experiments demonstrated that a single-layer MO raised blood oxygen saturation from 64.7% to 96.5% at 8 mL/min, with a corrected vol% oxygen transfer of 5.24% (52.4 mL O₂/L blood). Hemolysis and coagulation measurements after a 6 h circulation confirmed good hemocompatibility, with most blood damage attributable to the pump. An eight-layer stacked MO was configured with a total priming volume of approximately 5.6 mL and a pressure drop of 25–35 mmHg at 24–40 mL/min, indicating its potential in pumpless extracorporeal circulation for preterm neonates. This MO holds promise for providing minimally invasive and customizable respiratory support in an artificial uterus system. Full article

Background: Breast clip marker movement after ultrasound-guided biopsy can negatively affect lesion re-localisation rates and surgical outcomes, underscoring the need for improved understanding of the factors influencing clip displacement. Thus, this study aimed to compare four different breast clip markers and identify risk factors for clip migration and dislocation after ultrasound-guided placement. Methods: This retrospective study included 350 patients who underwent ultrasound-guided biopsy of a newly diagnosed breast lesion with placement of one of four types of breast clips (UltraClip Dual Trigger Biodur 108 Coil Marker [UC], TUMARK Professional [TP], TUMARK Vision [TV] and HydroMARK Breast Biopsy Site Marker [HM]). Clip migration and dislocation were assessed immediately after placement and during follow-up imaging for at least 3 months. A binary logistic regression analysis was performed to identify predictors of clip dislocation including lesional, perilesional and procedural parameters. Results: Clip migration rates were 26.0%, 18.0%, 10.0% and 25.0% and clip dislocation rates were 14.0%, 20.0%, 9.0% and 38.0% for UC, TP, TV and HM, respectively. Features significantly associated with clip dislocation included predominantly fatty surrounding tissue (p = 0.046) with low perilesional shear wave velocities (p = 0.054), smooth lesion contours (p = 0.041), soft lesion strain elastography (p =0.001), low clip-to-lesion-surface distance (p = 0.002) and the use of an HM breast clip (p = 0.032). Conclusions: The type of breast clip-marker, as well as perilesional and lesional characteristics, influence the likelihood of clip dislocation. Notably, the hydrogel-coated clip (HM) exhibited the highest rate of dislocation. Full article

Background: Viral vectors are indispensable tools in gene therapy and neural circuit mapping, offering promising therapeutic strategies for diverse genetic diseases and advancing neuroscience research. To achieve high transduction efficiency while mitigating impurity-induced immunogenicity, the development of viral vectors with improved purity and quality is essential. However, this critical requirement is often unmet by conventional purification methods such as ultracentrifugation, which are time-consuming and frequently result in limited product purity. The pseudorabies virus (PRV) is extensively employed as a viral tool for mapping neural circuits, where improved purity contributes to enhanced accuracy of neural tracing. PRV531 is a retrograde trans-synaptic tracer modified from the PRV Bartha strain, specifically designed to facilitate the precise visualization of hierarchical neural networks. Methods: In this study, we developed a method for the concentration and purification of PRV531 by integrating hollow fiber ultrafiltration (HF) with Capto^TM Core 700 (CC700) chromatography. Initially, to concentrate the viral supernatant, a 500 kDa HF membrane was employed, maintaining a feed flow rate of 80 mL/min, a shear rate ranging from 2000 to 6000 s⁻¹, and a transmembrane pressure (TMP) between 0.5 and 1 bar. Following concentration, the virus underwent purification through CC700 chromatography, operating at linear flow rates ranging from 100 to 300 cm/h. Results: Sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) revealed distinct bands consistent with the expected sizes of major PRV structural proteins, each with molecular weights ranging from 25 kDa to 150 kDa, concurrently demonstrating a substantial reduction in host cell proteins (HCPs) contamination. The purified PRV531 achieved a high final infectious titer of 3.55 × 10⁹ PFU/mL, with an overall functional virus recovery of 8.88% from the crude supernatant to the final product. Conclusion: These data demonstrate that TFF combined with CC700 resin can efficiently purify retrograde trans-synaptic PRV tracer. Furthermore, this approach provides a promising strategy for purifying other viral-based tracers that traditionally rely on conventional centrifugation methods. Full article

Nanoemulsion (NEM) is an effective adjuvant and delivery system for vaccines and nucleic acids, capable of inducing immune responses against diverse pathogens. Background/Objectives: Conventional NEM manufacture uses multi-step operations, typically high-shear homogenization and then microfluidization (HSHM), thereby increasing process complexity and contamination risk. As water-rich colloidal dispersions, NEM is prone to microbial proliferation and droplet coalescence; freezing further disrupts microstructure, causing phase fusion and separation, so NEM adjuvants are often stored separately from antigens in multi-vial formats. Lyophilization could reduce cold-chain dependence and enable single-vial products, but there is no systematic study on lyoprotectants comparation and process optimization of lyophilized NEM. Methods: An impingement jet mixing (IJM) process was evaluated as a simplified, scalable route for NEM production. Key IJM parameters, including flow ratio, total flow rate, preparation temperature, microchannel type, and shear mode—were examined to match attributes of conventional HSHM. Lyophilized and reconstituted NEM were characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, differential scanning calorimetry and/or in vitro potency to inform lyoprotectant selection, and Taguchi Design of Experiment (DOE) methodology guided lyophilization processes. Results: IJM yielded NEM with droplet size, polydispersity index (PDI) and morphology comparable to HSHM, with higher throughput and fewer unit operations. Optimized lyophilization technique with designed lyoprotectant and process formed closed structures to prevent the easy-to-flow monolayer of the emulsion from fusing, producing robust and stable NEM. Conclusions: Coupling IJM with targeted lyophilization establishes a scalable, lower-risk manufacturing paradigm for NEM that preserves critical quality attributes, reduces cold-chain reliance and enables single-vial adjuvanted vaccine formats with tangible industrial and clinical benefits. Full article

The discharge behavior of granular materials from double-orifice silos is strongly affected by the inter-orifice spacing, yet the mechanical role of the inter-orifice region remains unclear. In this study, discrete element method (DEM) simulations are combined with experiments to investigate the formation, stability, and collapse of an inter-orifice quasi-solid region and its impact on the discharge rate. The results show that increasing the inter-orifice spacing progressively weakens shear transmission between adjacent outlets, promoting the development of a low-velocity, load-bearing quasi-solid region. Based on μ(I) rheology and a nonlocal granular fluidity framework, the quasi-solid region is shown to be controlled by local shear activation rather than by geometric separation alone. Once the inter-orifice quasi-solid region is formed, this region restricts the spatial extension of shear bands near the outlets, leading to a reduction in the effective shear area and a corresponding decrease in the discharge rate. A critical inter-orifice spacing is identified, beyond which the two outlets discharge independently. These findings provide a mechanistic understanding of flow-rate regulation in multi-orifice silos, offering guidance for the design of granular discharge systems. Full article

The viscosity stability of polymer solution is one of the challenges in enhancing oil recovery, and zwitterionic copolymers present excellent viscosity stability and emulsification performance, enabling effective control of the oil/water interface mobility and enhancing oil recovery. Herein, a zwitterionic copolymer (P(AM/AMBS/MAPTAC)) containing sulfonic acid groups and quaternary amine groups was synthesized by segmentation initiation with AM, AMBS and MAPTAC as monomers. The chemical structure of P(AM/AMBS/MAPTAC) was confirmed by FTIR and ¹H NMR. The M_w value of P(AM/AMBS/MAPTAC) was 9.91 × 10⁶ g/mol, and the apparent viscosity of the 2000 mg/L solution was 24.92 mPa·s at 60 °C at a salinity of 5000 mg/L. P(AM/AMBS/MAPTAC) with sulfonic acid groups and quaternary amine groups exhibited outstanding salt tolerance and shear resistance. When the salinity was 10,000 mg/L and the shear rate was 300 s⁻¹, the apparent viscosity for the P(AM/AMBS/MAPTAC) solution was 23.45 mPa·s and the viscosity reduction rate was 69.23% at 60 °C for 30 d. Moreover, P(AM/AMBS/MAPTAC) exhibited an improved emulsifying property and a greater oil–water interface thickness than HPAM and SPAM due to the synergistic effect of the sulfonic acid and quaternary amine groups in the P(AM/AMBS/MAPTAC) molecule. The polymer flooding and alkali–surfactant–polymer flooding formed by P(AM/AMBS/MAPTAC) had high chemical oil recovery, and the oil displacement efficiency of P(AM/AMBS/MAPTAC) was higher than that of HPAM and SPAM in the polymer flooding and alkali–surfactant–polymer flooding systems. Full article

Hydraulic fracture height growth in thin sandstone–mudstone interbeds is often limited by bedding interface failure and multi-cluster stress interference. In this study, a coupled fracture–matrix interface finite element model was developed for the He-8 sandstone–mudstone interbeds in the Sulige Gas Field and validated against previously published true triaxial hydraulic fracturing experiments. The simulations indicate that vertical–horizontal stress difference (VSD; the difference between overburden stress and minimum horizontal stress within a layer) promotes fracture-height growth, whereas interlayer stress difference (ISD; the minimum horizontal stress contrast between adjacent layers) acts as a stress barrier that promotes bedding interface shear failure and arrests vertical growth. For the investigated reservoir configuration, each 4 MPa increase in VSD increased fracture height by approximately 1.5 m in the three-cluster case and 1.8 m in the four-cluster case, whereas each 2 MPa increase in ISD reduced the average fracture height by approximately 4.0 m in the three-cluster case and 3.5 m in the four-cluster case. Under moderate ISD, increasing the fluid viscosity was more effective than increasing the injection rate alone, although the benefit depended on cluster number and interface failure state. These results clarify how stress contrast, interface strength, and multi-cluster stress shadows jointly control cross-layer fracture propagation in thin interbedded reservoirs. Full article

The microstructural characteristics and precipitate features of titanium matrix composites (TMCs) are critical to tribological performance. In this study, TiCp/TA15 composites were fabricated via laser powder bed fusion (LPBF). The as-built composite was then heat-treated at 750 °C for 2 h to obtain a uniform duplex (α + β) microstructure with enhanced TiC precipitation, which was labeled as HT-750. The influence of the microstructural evolution on the tribological performance was systematically investigated. Compared to the as-built composite, the HT-750 composite exhibited a microhardness increase from 360.2 ± 6.4 HV to 459.2 ± 3.1 HV, a reduction in the friction coefficient from 0.649 ± 0.167 to 0.581 ± 0.111, and a decrease in the wear rate from 8.24 ± 0.44 × 10⁻⁴ mm³/(N·m) to 4.81 ± 0.39 × 10⁻⁴ mm³/(N·m), indicating a significant enhancement in wear resistance. This improvement is primarily attributed to the synergistic strengthening effect of the duplex matrix and TiC particles, which enhanced the load-bearing capability and suppressed surface plastic deformation. During the friction process, the dominant wear mechanisms of as-built and HT-750 composites evolved over time but exhibited distinct differences. The as-built composites were prone to continuous plastic deformation and damage accumulation, resulting in severe delamination, oxidative, and abrasive wear. Conversely, the HT-750 composites demonstrated higher resistance to plastic deformation and crack propagation, effectively mitigating interfacial shear and inhibiting damage evolution, with the wear mechanism being dominated by oxidative wear accompanied by abrasive wear and minor delamination. This work provides deep insights into the wear mechanisms of additively manufactured TMCs. Full article

Ducted propulsion fans are widely recognized for their ability to enhance aerodynamic efficiency and operational safety by utilizing a surrounding shroud to contain the flow and mitigate blade tip losses. However, maximizing thrust and optimizing internal flow dynamics remain critical challenges in further improving their aerodynamic performance. This study investigates the aerodynamic characteristics of a ducted propulsion fan configured with a secondary air intake channel designed to enhance mass flow ingestion. Utilizing Reynolds-Averaged Navier–Stokes (RANS) simulations coupled with the Shear Stress Transport (SST) k-omega turbulence model, the internal flow dynamics and aerodynamic efficiency of configurations both with and without the secondary air intake channel are examined. The secondary air intake, strategically located adjacent to the rotor blade tip, increases the mass flow rate and, consequently, enhances thrust. Physically, this configuration successfully reinjects bypass flow to mitigate tip leakage vortices, significantly reducing the low-velocity wake regions adjacent to the rotor tip. Several configurations were evaluated by systematically varying the intake channel’s position, curvature, and the dimensions of its inlet and outlet ports under static conditions at 6000 rpm. Numerical results demonstrate that the optimal design improves thrust by an additional 2.2% compared to the baseline ducted fan without the auxiliary intake port due to the mitigated tip vortices and stabilized flow field. Full article