Search Results (42)

This paper presents the design of a seed-pressing mechanism for a high-speed suction-type precision peanut planter to address the issue of poor seeding performance at high travel speeds and to reduce seed bounce within furrows. To clarify the working principle of the mechanism, a force analysis of peanut seeds in the furrow and a numerical study using discrete element analysis were conducted under high-speed operating conditions. Simulation results show that when the distance between the center of the seed-pressing wheel and the seeding-tube outlet (DCSPW-STO) is 146.11 mm, the seed-pressing wheel diameter is 198.13 mm, and the machine operating velocity is 6.45 km h⁻¹, the plant spacing qualification index and seeding depth compliance index for peanuts planted after rolling reach their maximum values. The corresponding germination rates of 93.78% and 90.65% indicate satisfactory sowing performance. Field validation trials demonstrate that when DCSPW-STO (l_fz) is 146 mm, the seed-pressing wheel diameter (d_fz) is 198 mm, and the machine operating velocity (v) is 6.45 km h⁻¹, the post-seeding plant-spacing qualification index and the seeding-depth compliance index reach 90.31% and 89.18%, respectively. Although slightly lower than the simulation results, these values meet the operational requirements for peanut seeding. Field performance comparisons with non-pressure seeding units further confirm that units equipped with the seed-pressing and soil-covering mechanisms significantly improve both the plant-spacing qualification index and the seeding-depth compliance index, satisfying agronomic requirements for high-speed peanut cultivation. Full article

Since the onset of industrialization, the safety of arable land has become a pressing global concern, with soil salinization emerging as a critical threat to agricultural productivity and food security. To address this challenge, the cultivation of economically valuable salt-tolerant plants has been proposed as a viable strategy. In the study, we investigated the physiological and molecular responses of Lycium ruthenicum Murr. to varying NaCl concentrations. Results revealed a concentration-dependent dual effect: low NaCl levels significantly promoted seed germination, while high concentrations exerted strong inhibitory effects. To elucidate the mechanisms underlying these divergent responses, a combined analysis of metabolomics and transcriptomics was applied to identify key metabolic pathways and genes. Notably, salt stress enhanced photosynthetic efficiency through coordinated modulation of ribulose 5-phosphate and erythrose-4-phosphate levels, coupled with the upregulation of critical genes encoding RPIA (Ribose 5-phosphate isomerase A) and RuBisCO (Ribulose-1,5-bisphosphate carboxylase/oxygenase). Under low salt stress, L. ruthenicum maintained intact cellular membrane structures and minimized oxidative damage, thereby supporting germination and early growth. In contrast, high salinity severely disrupted PS I (Photosynthesis system I) functionality, blocking energy flow into this pathway while simultaneously inducing membrane lipid peroxidation and triggering pronounced cellular degradation. This ultimately suppressed seed germination rates and impaired root elongation. These findings suggested a mechanistic framework for understanding L. ruthenicum adaptation under salt stress and pointed out a new way for breeding salt-tolerant crops and understanding the mechanism. Full article

Perilla seed has long been recognized in traditional diets for its health-promoting properties, but its potential role in hair loss prevention remains underexplored. This study compared three extraction methods—maceration (MAC), screw pressing (SC), and supercritical fluid extraction (SFE)—to determine their efficiency in recovering bioactive compounds and their effects on androgenetic alopecia (AGA)-related pathways. The SFE extract contained the highest levels of polyunsaturated fatty acids and tocopherols, while MAC uniquely recovered a broader range of polyphenols. Among all extracts, SFE-derived perilla seed extract showed the most consistent biological effects, promoting proliferation of human hair follicle dermal papilla cells (HFDPCs) by 139.4 ± 1.1% at 72 h (p < 0.05). It also reduced TBARS and nitrite levels in HFDPCs to 66.75 ± 0.62% of control and 0.87 ± 0.01 μM, respectively, indicating strong antioxidant and anti-inflammatory effects. Importantly, the SFE extract significantly downregulated SRD5A1-3 and TGF-β1 expression—key genes involved in androgen-mediated hair follicle regression—outperforming finasteride, dutasteride, and minoxidil in vitro by approximately 1.10-fold, 1.25-fold, and 1.50-fold, respectively (p < 0.05). These findings suggest that perilla seed extract obtained via supercritical fluid extraction may offer potential as a natural candidate to prevent hair loss through multiple biological mechanisms. These in vitro results support its further investigation for potential application in functional food or nutraceutical development targeting scalp and hair health. Full article

The diversification of plant protein sources is a strategic priority for European food systems, particularly under the EU Green Deal and Farm to Fork strategies. In this study, dual production of full-fat soy (FFS) and expanded soybean cake (ESC) was evaluated using non-GMO soybeans cultivated under semi-organic conditions in Central Poland. Two agronomic systems—post-emergence mechanical weeding with rotary harrow weed control (P1) and conventional herbicide-based control (P2)—were compared over a four-year period. The P1 system produced consistently higher yields (e.g., 35.6 dt/ha in 2024 vs. 33.4 dt/ha in P2) and larger seed size (TSW: up to 223 g). Barothermal and press-assisted processing yielded FFS with protein content of 32.4–34.5% and oil content of 20.8–22.4%, while ESC exhibited enhanced characteristics: higher protein (37.4–39.0%), lower oil (11.6–13.3%), and elevated dietary fiber (15.8–16.3%). ESC also showed reduced anti-nutritional factors (e.g., trypsin inhibitors and phytic acid) and remained microbiologically and oxidatively stable over six months. The semi-organic P1 system offers a scalable, low-input approach to local soy production, while the dual-product model supports circular, zero-waste protein systems aligned with EU sustainability targets. Full article

Current rice cultivation relies on mechanical transplanting, which is costly and complex, and direct seeding, which suffers from poor quality and low efficiency. To address these issues, a double-press precision depth-control seeding method was developed in this study. Discrete element modeling (DEM) was employed to optimize key operational parameters—compaction force, soil covering cutter rotational speed, and penetration depth—using qualified seeding depth and missed seeding rates as performance metrics. Optimal results were achieved at a 60 kPa compaction force, a 300 rpm rotational speed, and a 7 cm penetration depth. A prototype seeder was manufactured and evaluated in three-year field trials against conventional dry direct seeders and mechanical transplanters. The double-press seeder demonstrated significantly superior performance compared to conventional direct seeding. It optimized the crop population structure by maintaining a high tiller number while increasing the productive tiller rate, resulting in stable annual yields exceeding 10.11 t·hm⁻². Although its yield was slightly lower than that of mechanical transplanting, the double-press seeder offers a compelling practical alternative due to its operational convenience and economic benefits. Full article

Skin aging is a complex process influenced by several factors, including UV exposure, environmental stressors, and lifestyle choices. The demand for effective, natural skincare products has driven research into plant-based oils rich in bioactive compounds. Rosehip oil has garnered attention for its high content of carotenoids, phenolics, and antioxidants, which are known for their anti-aging, photoprotective, and skin-rejuvenating properties. Despite the growing interest in rosehip oil, limited studies have investigated its efficacy on human skin using advanced imaging technologies. This study aims to fill this gap by evaluating the efficacy of cold-pressed Rosa canina seed oil on facial skin characteristics, specifically wrinkles, ultraviolet (UV) spot reduction, and erythema mitigation, using imaging technologies (the VISIA analysis system). Seed oil pressed from R. canina collected from the Băișoara area of Cluj County has been selected for this study due to its high carotenoid, phenolic, and antioxidant contents. The oil has also been analyzed for the content of individual carotenoids (i.e., lutein, lycopene, β Carotene, and zeaxanthin) using HPLC-DAD (High-Performance Liquid Chromatography—Diode Array Detector), along with lutein and zeaxanthin esters and diesters. After the preliminary screening of multiple Rosa species for carotenoid, phenolic, and antioxidant contents, the R. canina sample with the highest therapeutic potential was selected. A cohort of 27 volunteers (aged 30–65) underwent a five-week treatment protocol, wherein three drops of the selected rosehip oil were topically applied to the face daily. The VISIA imaging was conducted before and after the treatment to evaluate changes in skin parameters, including the wrinkle depth, UV-induced spots, porphyrins, and texture. Regarding the bioactivities, rosehip oil showed a significant total carotenoids content (28.398 μg/mL), with the highest levels in the case of the β-carotene (4.49 μg/mL), lutein (4.33 μg/mL), and zexanthin (10.88 μg/mL) contents. Results indicated a significant reduction in mean wrinkle scores across several age groups, with notable improvements in individuals with deeper baseline wrinkles. UV spots also showed visible declines, suggesting ideal photoprotective and anti-pigmentary effects attributable to the oil’s high vitamin A and carotenoid content. Porphyrin levels, often correlated with bacterial activity, decreased in most subjects, hinting at an additional antimicrobial or microbiome-modulatory property. However, skin responses varied, possibly due to individual differences in skin sensitivity, environmental factors, or compliance with sun protection. Overall, the topical application of R. canina oil appeared to improve the facial skin quality, reduce the appearance of age-related markers, and support skin health. These findings reinforce the potential use of rosehip oil in anti-aging skincare formulations. Further long-term, large-scale studies are warranted to refine dosing regimens, investigate mechanisms of action, and explore synergistic effects with other bioactive compounds. Full article

Antibiotic resistance remains a pressing global health concern, necessitating the development of sustainable and innovative antimicrobial strategies. Plant-based nanomaterials, particularly those synthesized from agricultural byproducts, such as mango seeds, tomato skins, and orange peels, have emerged as promising candidates due to their potent antimicrobial activity and reduced likelihood of resistance development. These nanomaterials exert their effects through diverse mechanisms, including the generation of reactive oxygen species, the disruption of microbial membranes, and interference with critical cellular functions, such as DNA replication. Beyond their antimicrobial properties, recent studies have demonstrated their ability to modulate gut microbiota composition—promoting beneficial genera such as, Lactobacillus and Bifidobacterium, while inhibiting pathogenic species like Staphylococcus spp. This dual functionality positions them as attractive agents for prebiotic interventions and targeted dietary strategies. The convergence of plant-derived nanotechnology and personalized nutrition, guided by individual microbiota profiles, offers a novel paradigm for enhancing host health and preventing infection-related disorders. This review provides a comprehensive overview of the sustainable production of nanomaterials from agricultural and food industry waste, their antimicrobial and prebiotic applications, and their potential in regulating gut microbiota. Furthermore, we discuss emerging nanoenabled strategies to combat infectious diseases and highlight future directions for mechanistic studies, safety assessments, and clinical translation in pharmaceutical, nutraceutical, and functional food contexts. Full article

In normal conditions, neuroinflammation induces microglia and astrocyte activation to maintain brain homeostasis. However, excessive or prolonged neuroinflammation can inflict harmful damage on brain tissue. Numerous factors can trigger chronic neuroinflammation, ultimately leading to neurodegeneration. In this context, considering the pressing need for novel, natural approaches to mitigate neuroinflammatory damage, attention has turned to unconventional sources such as agricultural by-products. Citrus fruits are widely consumed globally, producing substantial waste, including peels, seeds, and pulp. Traditionally regarded as agricultural waste, these by-products are now recognized as valuable reservoirs of bioactive compounds, including flavonoids, carotenoids, terpenoids, and limonoids. Among these, citrus polyphenols—particularly flavanones like hesperidin, naringenin, and eriocitrin—have emerged as potent modulators of neuroinflammatory pathways through their multifaceted interactions with cellular antioxidant systems, pro-inflammatory signaling cascades, neurovascular integrity, and gut–brain axis dynamics. This review aims to characterize the key molecules present in citrus waste and synthesizes preclinical and clinical evidence to elucidate the biochemical mechanisms underlying neuroinflammation in neurodegenerative disorders. Full article

To conduct DEM simulation research on the collision characteristics between seeds and pressed substrate holes, a discrete element model of mechanically pressed holes in sowing substrates was developed in this study. The geometric DEM models of sowing substrate particles were established based on the sieve test, and the Hertz–Mindlin with JKR contact model was utilized for simulating of the fine, moist, and cohesive substrate particles. The angle of repose measured by the funnel method was served as the target, Plackett–Burman experiments were conducted to screen significant contact mechanical parameters, while steepest ascent and Box–Behnken experiments were employed to define their value ranges. A neural network model for predicting the angle of repose was constructed, and a genetic algorithm was applied to optimize the significant contact mechanical parameters. The cross-sectional profiles of the pressing hole were obtained through image profile feature extraction in simulation and 3D scanning projection methods in the experiment. The calibrated inter-particle dynamic friction coefficient, inter-particle coefficient of restitution, dynamic friction coefficient between particles and stainless steel, and JKR surface energy of the substrate were 0.0349, 0.5448, 0.0233, and 0.4279, respectively. The deviation of the simulated angle of repose utilizing the optimized contact parameters was 0.4°. The shapes of the pressed holes obtained from simulation and experiment showed good consistency. The pressing speed had no significant effect on the mean depth of all sampling points, suggesting that a higher pressing speed should be set to improve the operation efficiency. The pressing depth has a highly significant effect on the mean depth of all sampled points, but no significant effect on the deviation between the simulated and experimental mean depths. The maximum difference in the mean depth deviation between simulated and experimental sampled points is 1.308 mm. It demonstrates that the established discrete element model can efficiently and accurately simulate the deformation of the pressing hole in sowing substrate. It provides an applicable simulation model for fast optimization design of the pressing hole and sowing equipment. Full article

In general, there are three methods for extracting oil from various sources: mechanical, solvent, and pre-press-solvent. Each of these methods has its own advantages and disadvantages, with extraction efficiency depending on key factors such as the extraction technique, the properties of the plant component matrix, and the solvent used. Factors like temperature, pressure, and time also play a role. Researchers have consistently sought to replace or complement these methods to reduce residual oil in products. This study introduces new oil extraction methods that have gained attention in recent years, including the microwave, pulsed electric field, ultrasound, supercritical fluid, enzymatic, ohmic, and combined methods to enhance efficiency. The research demonstrates that these methods increase oil extraction efficiency and bioactive compound extraction from plant sources, resulting in improved oil quality. Most methods also reduce extraction time, offering researchers and industrialists a variety of options for their oil extraction needs. However, the study notes contradictions in the results, such as varying acidity levels in the oil, which may be attributed to raw materials and study conditions. In the end, it was determined that ultrasound, pulsed electric field, and enzyme methods can be used industrially to extract oil from olives, while supercritical fluid can be used to extract oil from certain seeds. Full article

Xanthoceras sorbifolium Bunge is an oil-bearing shrub native to China, whose seeds are rich in oil and can be used for extracting edible oil. The primary extraction methods for Xanthoceras sorbifolium Bunge oil (XSBO) include pressing, solvent extraction (SE), ultrasound-assisted extraction (UAE), aqueous enzymatic extraction (AEE), micro-wave-assisted extraction (MAE), and supercritical carbon dioxide extraction (SFE-CO₂). This review not only compares the advantages and disadvantages of these oil extraction techniques regarding extraction principles, oil yield efficiency, and cost-effectiveness but also reviews the existing purification processes for the active components in oil. XSBO exhibits various health benefits, including antibacterial, antioxidant, anti-inflammatory, and antitumor properties. In particular, it contains a special component called nervonic acid, which rarely exists in other plant oils, and has garnered significant attention for its potential in alleviating the impact of neurological diseases. XSBO has been widely applied in food, pharmaceuticals, and health supplements. However, the underlying mechanisms of its bioactive functions have not been fully elucidated, and there is limited research on encapsulation techniques, which restricts its application in food and pharmaceutical health products. Further studies in this domain can focus on purification processes, identifying the precise mechanism of action, to achieve efficient development and utilization of XSBO. Full article

The growing demand for plant-based protein and natural food ingredients has further fueled interest in exploring hemp seeds (Cannabis sativa L.) as a sustainable source of and nutrition. In addition to the content of proteins and healthy fats (linoleic acid and alpha-linolenic acid), hemp seeds are rich in phytochemical compounds, especially terpenoids, polyphenols, and phytosterols, which contribute to their bioactive properties. Scientific studies have shown that these compounds possess significant antioxidant, antimicrobial, and anti-inflammatory effects, making hemp seeds a promising ingredient for promoting health. Since THC (tetrahydrocannabinol) and CBD (cannabidiol) are found only in traces, hemp seeds can be used in food applications because the psychoactive effects associated with cannabis are avoided. Therefore, the present article reviews the scientific literature on traditional and modern extraction methods for obtaining active substances that meet food safety standards, enabling the transformation of conventional foods into functional foods that provide additional health benefits and promote a balanced and sustainable diet. Also, the identification methods of biologically active compounds extracted from hemp seeds and their bioactivity were evaluated. Mechanical pressing extraction, steam distillation, solvent-based methods (Soxhlet, maceration), and advanced techniques such as microwave-assisted and supercritical fluid extraction were evaluated. Identification methods such as high-performance liquid chromatography (HPLC) and mass spectrometry (MS) allowed for detailed chemical profiling of cannabinoids, terpenes, and phenolic substances. Optimizing extraction parameters, including solvent type, temperature, and time, is crucial for maximizing yield and purity, offering the potential for developing value-added foods with health benefits. Full article

This study explores the potential use of mould biomass and waste fibres for the production of agrotextiles. First, 20 mould strains were screened for efficient mycelium growth, with optimized conditions of temperature, sources of carbon and nitrogen in the medium, and type of culture (submerged or surface). A method was developed for creating a biocomposite based on the mould mycelium, reinforced with commercial bleached softwood kraft (BSK) pulp and fibre additives (cotton, hemp). The best properties, including mechanical, water permeability, and air permeability, were shown by the biocomposites containing 10–20% Cladosporium cladosporioides mycelium grown in surface or submerged cultures, milled with BSK pulp, cotton, and hemp (10–20%). The mould mycelium was refined with cellulosic fibrous material, formed, pressed, and dried, resulting in a biomaterial with good mechanical parameters, low water permeability, and high air permeability. The biocomposite was fully biodegradable in soil after 10 days in field conditions. The use of the biocomposite as a crop cover shortened the germination time and increased the percentage of germinated onion, but had no effect on parsley seeds. This study shows the potential of using mould mycelium for the production of biomaterial with good properties for applications in horticulture. Full article

Anemone baicalensis Turcz., a botanical species with a rich historical background in traditional medicine for detoxification and insecticidal applications, possesses a vast, yet largely unexplored, therapeutic potential. This study primarily focused on conducting a qualitative phytochemical analysis of the plant, determining the active ingredient content and antioxidant activity of various solvent extracts. The qualitative phytochemical analysis revealed the presence of 12 different types of phytochemicals within the plant. Utilizing ultraviolet-visible spectrophotometry, we identified 11 active ingredients in 4 solvent extracts. Notably, the methanol extract was found to contain high concentrations of total carbohydrate, total monoterpenoid, total phenolic, total tannin, and total triterpenoid. In the antioxidant experiment, the methanol extract demonstrated superior scavenging abilities against 1,1-diphenyl-2-picrylhydrazyl radical, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonicacid) diammonium salt, superoxide anion radical, and hydrogen peroxide, outperforming other extracts in chelation experiments aimed at reducing iron and metal ions. Consequently, the methanol extract was selected for further investigation. Subsequent ultrahigh-performance liquid chromatography-electrospray ionization-quadrupole-time of flight-mass spectrometry analysis revealed that the methanol extract contained 39 compounds, primarily phenolic compounds and triterpenoid saponins. Three stability assessments confirmed the extract’s stability under high temperatures, varying pH levels, and simulated gastrointestinal processes. Additionally, oil stability testing demonstrated its antioxidant capacity in extra virgin olive oil and cold-pressed sunflower seed oil media. An oral acute toxicity experiment conducted on mice not only confirmed the absence of acute toxicity in the methanol extract but also provided a dose reference for subsequent gastric protection experiments. Notably, the methanol extract exhibited significant gastroprotective effects against ethanol-induced gastric lesions in rats, as evidenced by histopathological and biochemical analyses. Specifically, the extract reduced levels of malondialdehyde, alanine aminotransferase, and aspartate aminotransferase while increasing glutathione, nitric oxide, and catalase, indicating its gastroprotective mechanism. These findings suggest that the methanol extract from the aerial part of Anemone baicalensis could be a promising therapeutic agent for conditions associated with oxidative imbalances. They underscore the plant’s potential therapeutic benefits and offer valuable insights into its antioxidant properties, thereby broadening our understanding of its medicinal potential. Full article

In this study, we conducted tests on the seeds from four Taiwanese native Camellia species (C. japonica, C. furfuracea, C. laufoshanensis, and C. formosensis) and three commercialized species (C. oleifera, C. brevistyla, and C. sinensis) for comparison. We examined various aspects of these species, such as seed oil content, suitability for mechanical pressing, volatile components (edible flavor), and oil stability (suitability for cooking), to assess the feasibility of using these four native Taiwanese Camellia seeds as sources of edible oil. The results from solvent extraction tests and mechanical pressing experiments confirm that the seeds from C. furfuracea, C. japonica, and C. laufoshanensis have high oil contents, and their oils are suitable for extraction via the popular mechanical pressing method, with oil yields comparable to or higher than those of the commercialized Camellia species. The volatile components of the oils were collected using MonoTrap adsorbents and analyzed with a thermal desorption system coupled with gas chromatography–mass spectrometry (ATD-GC/MS), primarily consisting of alcohols, ketones, and aldehydes. The results of oxidative stability tests reveal that the seed oils from C. japonica, C. furfuracea, and C. laufoshanensis are higher than or equally stable to those from the commercialized Camellia species. After six months of storage, the stability of these three Camellia seed oils remained relatively high, demonstrating that the seed oils from C. japonica, C. furfuracea, and C. laufoshanensis can withstand high temperatures and can be easily preserved for future applications. Full article