Search Results (984)

Growing global concerns over pesticide residues and microbial contamination in plant-derived foods have intensified the demand for sustainable decontamination solutions. Conventional physical, chemical, and biological methods are hampered by inherent limitations, including operational inefficiency, secondary pollution risks, and nutritional degradation. Atmospheric cold plasma (ACP) has emerged as a promising non-thermal technology to address these challenges at near-ambient temperatures, leveraging the generation of highly reactive oxygen/nitrogen species (RONS), ultraviolet radiation, and ozone. This review comprehensively examines fundamental ACP mechanisms, discharge configurations, and their applications within plant-based food safety systems. It critically evaluates recent advancements in inactivating microorganisms, degrading mycotoxins and pesticides, and modulating enzymatic activity, while also exploring emerging applications in bioactive compound extraction, drying enhancement, and seed germination promotion. Crucially, the impact of ACP on the quality attributes of plant-based foods is summarized. Treatment parameters can alter physicochemical properties covering color, texture, flavor, acidity, and water activity as well as nutritional constituents such as antioxidants, proteins, lipids, and carbohydrate content. As an environmentally friendly, low-energy-consumption technology with high reactivity, ACP offers transformative potential for enhancing food safety, preserving quality, and fostering sustainable agricultural systems. Full article

Aflatoxins, toxic secondary metabolites produced by Aspergillus species, are widespread contaminants in food and feed, with aflatoxin B1 (AFB1) recognized as the most potent carcinogen. Climate change increases the risk of contamination by promoting fungal proliferation. While the hepatotoxic and enterotoxic effects of aflatoxins are well established, emerging evidence highlights their immunosuppressive and neurotoxic potential. Notably, AFB1 disrupts gut microbiota, compromises intestinal barrier integrity, and induces neuroinflammation via the microbiota–gut–brain axis. Probiotics have shown promise in mitigating these effects by modulating microbial balance, enhancing barrier function, and reducing neuroinflammatory responses. This review summarizes current findings on the systemic toxicity of aflatoxins—particularly their impact on the gut–brain axis—and evaluates the therapeutic potential of probiotics in counteracting aflatoxin-induced damage. Full article

The rapid development of the nuclear industry and mining has increased environmental radioactive contamination, posing potentially ecological risks and health threats to humans. Uranium compounds are known to exhibit selective nephrotoxicity, but their toxicological processes and mechanisms still remain poorly understood and controversial. In this study, the uranyl-induced toxicity in human renal tubular epithelial cells (HK-2) were explored using flow cytometry, DAPI staining, and comet assays. Our results demonstrate that uranium exposure primarily triggers apoptosis. Kyoto Encyclopedia of Genes and Genomes pathway enrichment and protein–protein interaction (PPI) analyses revealed significant associations with DNA damage. Moreover, aberrant expression of ABC transporters (e.g., ABCB7) and mitochondrial-related proteins confirms uranium-induced mitochondrial dysfunction. Gene Ontology functional annotation implicated extrinsic apoptotic signaling pathways in uranium-induced cell death. The downregulation of the UBL5 protein also pointed to endoplasmic reticulum stress-mediated apoptosis. In summary, uranium exposure can induce the apoptosis of HK-2 cells through intrinsic pathways by damaging DNA and mitochondria and disrupting protein synthesis, with secondary contributions from endoplasmic reticulum stress and extrinsic apoptotic signaling. Full article

Water contamination from textile dyes is a major environmental hazard. This is due to the textile industry serving among the biggest manufacturers, thus the extensive usage of these dyes. Several methods for the treatment of these pollutants have been used; however, they have limitations in terms of cost, forming secondary pollution, and effectiveness. Metal oxides such as tin oxide (SnO₂) have been identified as potential photocatalysts for the degradation of these dyes. The potential of SnO₂-based photocatalysts, especially those made using green techniques, has been at the forefront of current research. The physical and optical properties, green synthesis techniques, and photocatalytic uses of SnO₂ NPs are examined. Furthermore, methods to improve photocatalytic effectiveness through the formation of heterostructures are also explored. Lastly, the conclusion and future perspectives of these materials as suitable candidates for water treatment are highlighted. Full article

Date palm (Phoenix dactylifera L.) is a vital crop cultivated primarily in developing regions, playing a strategic role in global food security through its significant contribution to nutrition, economy, and livelihoods. Global and regional production trends revealed increasing demand and expanded cultivation areas, underpinning the fruit’s importance in national food security policies and economic frameworks. The date fruit’s rich nutritional profile, encompassing carbohydrates, dietary fiber, minerals, and bioactive compounds, supports its status as a functional food with health benefits. Postharvest technologies and quality preservation strategies, including temperature-controlled storage, advanced drying, edible coatings, and emerging AI-driven monitoring systems, are critical to reducing losses and maintaining quality across diverse cultivars and maturity stages. Processing techniques such as drying, irradiation, and cold plasma distinctly influence sugar composition, texture, polyphenol retention, and sensory acceptance, with cultivar- and stage-specific responses guiding optimization efforts. The cold chain and innovative packaging solutions, including vacuum and modified atmosphere packaging, along with biopolymer-based edible coatings, enhance storage efficiency and microbial safety, though economic and practical constraints remain, especially for smallholders. Microbial contamination, a major challenge in date fruit storage and export, is addressed through integrated preservation approaches combining thermal, non-thermal, and biopreservative treatment. However, gaps in microbial safety data, mycotoxin evaluation, and regulatory harmonization hinder broader application. Date fruit derivatives such as flesh, syrup, seeds, press cake, pomace, and vinegar offer versatile functional roles across food systems. They improve nutritional value, sensory qualities, and shelf life in bakery, dairy, meat, and beverage products while supporting sustainable waste valorization. Emerging secondary derivatives like powders and extracts further expand the potential for clean-label, health-promoting applications. This comprehensive review underscores the need for multidisciplinary research and development to advance sustainable production, postharvest management, and value-added utilization of date palm fruits, fostering enhanced food security, economic benefits, and consumer health worldwide. Full article

Aflatoxins are carcinogenic secondary metabolites produced by Aspergillus species and are common contaminants of many crops including maize. Atoxigenic Aspergillus flavus strains, formulated as biocontrol products such as Aflasafe^® TZ01, that comprises a mixture of four native atoxigenic strains, are used as pre-harvest agents to suppress toxigenic strains and reduce aflatoxin levels. This study assessed the intended and potential unintended impacts of Aflasafe^® TZ01 on mycotoxin contamination in maize. A total of 158 samples 79 from treated and 79 from untreated fields were collected from Chemba and Kiteto districts in Tanzania. Multi-mycotoxin analysis was conducted using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Detected toxins included aflatoxins (AFB1, AFB2, AFG1, AFG2), trichothecenes, and fumonisins (FB1, FB2, FB3). Non-parametric paired t-test analysis showed significant reductions in AFB1 (62%, p = 0.024) in treated samples. The mean concentrations of Fusarium mycotoxins such as NIV, T2, and ZEN were higher in treated maize. However, statistical analysis showed that these differences were only numerical trends, and were not significant (p > 0.05). These findings confirm the efficacy of Aflasafe^® TZ01 in reducing aflatoxins, while underscoring the importance of continued monitoring for other mycotoxins as part of integrated mycotoxin management strategies to mitigate both aflatoxins and co-occurring toxins. Full article

In this study, a correlative approach using Raman spectroscopy and scanning electron microscopy (SEM) is introduced to meet the challenges of identifying impurities, especially carbon-related compounds in metal injection-molded (MIM) Mg-0.6Ca specimens designed for biomedical applications. This study addresses, for the first time, the issue of carbon residuals in the binder-based powder metallurgy (PM) processing of Mg-0.6Ca materials. A deeper understanding of the material microstructure is important to assess the microstructure homogeneity at submicron levels as this later affects material degradation and biocompatibility behavior. Both spectroscopic and microscopic techniques used in this study respond to the concerns of secondary phase distributions and their possible stoichiometry. Our micro-Raman measurements performed over a large area reveal Raman modes at ~1370 cm⁻¹ and ~1560 cm⁻¹, which are ascribed to the elemental carbon, and at ~1865 cm⁻¹, related to C≡C stretching modes. Our study found that these carbonaceous residuals/contaminations in the material microstructure originated from the polymeric binder components used in the MIM fabrication route, which then react with the base material components, including impurities, at elevated thermal debinding and sintering temperatures. Additionally, using evidence from the literature on thermal carbon cracking, the presence of both free carbon and calcium carbide phases is inferred in the sintered Mg-0.6Ca material in addition to the Mg₂Ca, oxide, and silicate phases. This first-of-its-kind correlative characterization approach for PM-processed Mg biomaterials is fast, non-destructive, and provides deeper knowledge on the formed residual carbonaceous phases. This is crucial in Mg alloy development strategies to ensure reproducible in vitro degradation and cell adhesion characteristics for the next generation of biocompatible magnesium materials. Full article

Aflatoxins (AFs), harmful secondary metabolites produced by the genus Aspergillus, particularly Aspergillus flavus and Aspergillus parasiticus, are one of the best-known potent mycotoxins, posing a significant risk to public health. The primary type, especially aflatoxin B₁ (AFB₁), is a potent carcinogen associated with liver cancer, immunosuppression, and other health problems. Environmental factors such as high temperatures, humidity, and inadequate storage conditions promote the formation of aflatoxin in staple foods such as maize, peanuts, and rice. Immunocompromised individuals, including those with HIV/AIDS, hepatitis, cancer, or diabetes, are at increased risk due to their reduced detoxification capacity and weakened immune defenses. Chronic exposure to AF in these populations exacerbates liver damage, infection rates, and disease progression, particularly in developing countries and moderate-income populations where food safety regulations are inadequate and reliance on contaminated staple foods is widespread. Biomarkers such as aflatoxin-albumin complexes, urinary aflatoxin M₁, and aflatoxin (AF) DNA adducts provide valuable insights but remain underutilized in resource-limited settings. Despite the globally recognized health risk posed by AF, research focused on monitoring human exposure remains limited, particularly among immunocompromised individuals. This dynamic emphasizes the need for targeted studies and interventions to address the particular risks faced by immunocompromised individuals. This review provides an up-to-date overview of AF exposure in immunocompromised populations, including individuals with cancer, hepatitis, diabetes, malnutrition, pregnant women, and the elderly. It also highlights exposure pathways, biomarkers, and biomonitoring strategies, while emphasizing the need for targeted interventions, advanced diagnostics, and policy frameworks to mitigate health risks in these vulnerable groups. Addressing these gaps is crucial to reducing the health burden and developing public health strategies in high-risk regions. Full article

Nitrosamine impurities have provoked numerous global medicine recalls due to their possible presence during drug manufacturing or storage. Regarding formulation of nitrosamine impurities, a key risk involves reactions between nitrosating agents (nitrite) in excipients and vulnerable amines as impurities or degradants. Rapid detection across various sample types is essential to support pharmaceutical manufacturing. In this study, two methods were developed to detect nitrite in excipients and crucial secondary amines in active ingredient metformin hydrochloride at trace levels, respectively. The former method was developed based on the reaction of nitrite ions with 2,3-diaminonaphthalene to form 1-[H]-naphthotriazole (NAT), whereas the latter was based on amine tosylation. Mass spectrometric conditions were optimized using electrospray ionization in the positive mode. Multiple reaction monitoring transitions were determined at m/z 170 → 115 for NAT, and m/z 200.1 → 91 for dimethylamine (DMA) and 228.1 → 91 for diethylamine (DEA). These methods were validated using selected eight excipients or metformin hydrochloride in terms of specificity, linearity, accuracy, precision, robustness, limit of quantification (LOQ), and limit of determination according to the ICH guidelines. The results of the validation were within the acceptable criteria. Applicability of the methods was evaluated using 170 pharmaceutical samples donated by industries. The nitrite content in the excipients ranged from <LOQ to 4.74 ppm, with observed levels 1.3 to 6 times higher than the average (0.8 ppm) in the samples. The DMA levels in the metformin hydrochloride were within the limit (500 ppm) but varied significantly (0.2–209.2 ppm) among manufacturers. DEA was detected at lower levels (0.7–0.9 ppm). To mitigate the nitrosamine content in the metformin products, the excipient compositions were investigated by selecting those with low nitrite levels. As the types of impurities detected have become increasingly diverse and detection cycles have become more frequent, the requirement for preemptive safety management to relieve public anxiety is essential for regulatory aspects. Nitrite and secondary amines are crucial precursors to N-nitrosamine, and the suggesting approach could be a means to mitigate N-nitrosamine contamination. Full article

Aflatoxin B1 (AFB1) is a highly toxic secondary metabolite produced by Aspergillus species. Its extensive contamination of animal feed and human food poses significant health hazards to livestock and humans, with hepatotoxicity being a primary concern. This study investigated the protective effect of baicalin on AFB1-induced liver injury in ducklings. In the first experiment, ducklings were administered AFB1 at doses of 0, 6, 12, or 24 μg/kg body weight/day for 7 days to identify the optimal concentration for establishing a model of AFB1-induced growth performance and liver injury. Administration of AFB1, particularly at the higher doses (12 and 24 μg/kg body weight/day), significantly reduced growth performance and induced structural and functional liver injury (p < 0.05). In a second experiment, ducklings were administered AFB1 (12 μg/kg body weight/day) with or without baicalin (25–100 mg/kg body weight/day) for 7 days. Dietary baicalin significantly increased the serum albumin level; reduced the serum alanine aminotransferase, aspartate aminotransferase, and gamma-glutamyl transferase levels; improved growth performance; and ameliorated structural and functional liver injury in ducklings exposed to AFB1 (p < 0.05). The results indicate that dietary baicalin alleviates AFB1-induced liver injury and growth performance decline in ducklings. Hence, baicalin could serve as a potential feed additive to reduce the harmful effects of AFB1 in the poultry breeding industry. Full article

Wound care in military and combat environments poses distinct challenges that set it apart from conventional medical practice in civilian settings. The nature of injuries sustained on the battlefield—often complex, contaminated, and involving extensive tissue damage—combined with limited access to immediate medical intervention, significantly increases the risk of infection, delayed healing, and adverse outcomes. Traditional wound dressings frequently prove inadequate under such extreme conditions, as they have not been designed to address the specific physiological and logistical constraints present during armed conflicts. This review provides a comprehensive overview of recent progress in the development of advanced wound dressings tailored for use in military scenarios. Special attention has been given to multifunctional dressings that go beyond basic wound coverage by incorporating biologically active macromolecules such as collagen, chitosan, thrombin, alginate, therapeutic peptides, and growth factors. These compounds contribute to properties including moisture balance control, exudate absorption, microbial entrapment, and protection against secondary infection. This review highlights the critical role of advanced wound dressings in improving medical outcomes for injured military personnel. The potential of these technologies to reduce complications, enhance healing rates, and ultimately save lives underscores their growing importance in modern battlefield medicine. Full article

Surveillance of swine influenza A virus (swIAV) traditionally focuses on respiratory matrices, yet emerging evidence suggests that fecal shedding and secondary environmental contamination may also contribute to viral dissemination. In this study, we collected and analyzed nasal, rectal, environmental, milk, and colostrum samples from naturally infected pigs in a commercial farm in Minas Gerais, Brazil. IAV RNA was detected in 25% of samples, including 42% from asymptomatic animals, with nasal swabs showing higher detection rates (30%) than rectal swabs (20%), though rectal Ct values were consistently higher, indicative of lower viral loads. We successfully isolated viable viruses from feces and effluent samples. Whole-genome sequencing revealed co-circulation of enzootic pH1N1 clade #2 (HA) and pN1 clade #4 (NA), alongside human-origin H3N2 sequences clustering within clade 3C.2a1b.2a.2a.1, and N2 segments related to pre-3C human lineages from 2001 to 2002. Phylogenetic and p-distance analyses support both recent reverse zoonosis and historical transmission events. Detection of complete HA/NA sequences from rectal swabs and treated effluent further emphasizes the surveillance value of non-respiratory matrices. The integration of respiratory and fecal/environmental sampling appears important to achieve more comprehensive IAV monitoring in swine herds and may have significant implications for One Health strategies in Brazil and beyond. Full article

Objectives: Burkholderia cepacia complex (Bcc), a Gram-negative organism, is a well-recognized cause of hospital outbreaks, often linked to a contaminated shared source, such as multidose medications. In this study, we report an outbreak of Bcc infections in a tertiary care hospital, associated with the intrinsic contamination of a prepared solution used in interventional radiology (IR) procedures. Additionally, we provide a detailed explanation of the interventions implemented to control and interrupt the outbreak. Methods: Records from the infection control committee from 1 January 2023 to 31 October 2024 were screened to identify cases with Bcc growth in cultured blood, urine, or respiratory samples. Clinical and laboratory data were collected in March 2025. Bacterial identification was performed using conventional methods and MALDI-TOF (Bruker Daltonics, Bremen, Germany). Controls were matched to cases by ward, date of initial growth, and duration of hospitalization. Demographic and clinical data of these patients were systematically collected and analyzed. Microbiological cultures were obtained from environmental objects of concern and certain medications. Results: A total of 82 Burkholderia species were identified. We enrolled 77 cases and 77 matched controls. The source of contamination was identified in ready-to-use intravenous medications (remifentanil and magnesium preparations) in the IR department. These preparations were compounded in advance by the team and were used repeatedly. Although the outbreak originated from contaminated IV medications used in IR, secondary transmission likely affected 28 non-IR patients via fomites, shared environments, and possible lapses in isolation precautions. The mortality rate among the cases was 16.9%. Infection with Bcc was associated with prolonged intensive care unit stays (p = 0.018) and an extended overall hospitalization duration (p < 0.001); however, it was not associated with increased mortality. The enforcement of contact precautions and comprehensive environmental decontamination successfully reduced the incidence of the Bcc outbreak. No pathogens were detected in cultures obtained after the disinfection. Conclusions: The hospital transmission of Bcc is likely driven by cross-contamination, invasive medical procedures, and the administration of contaminated medications. Implementing stringent infection control measures such as staff retraining, updated policies on medication use, enhanced environmental decontamination, and strict adherence to isolation precautions has proven effective in curbing the spread of virulent and transmissible Bcc. Full article

The contamination of water bodies by industrial dyes poses a significant environmental challenge on a global scale. Conventional wastewater treatment methods often suffer from limitations related to high cost, limited efficiency, and potential secondary environmental impacts. Recent advances in photocatalytic technologies have highlighted the potential of metal sulfide-based photocatalysts, particularly those synthesized through environmentally friendly, plant-mediated approaches, as promising alternatives for efficient and sustainable dye degradation. However, despite their promising potential, metal sulfide photocatalysts often suffer from limitations such as photocorrosion, low stability under irradiation, and rapid recombination of charge carriers, which restrict their long-term applicability. In light of these challenges, this review provides a comprehensive examination of the physicochemical characteristics, synthetic strategies, and photocatalytic applications of metal sulfides. Particular emphasis is placed on green synthesis routes employing plant-derived extracts, which offer environmentally benign and sustainable alternatives to conventional methods. Moreover, the review elucidates various modification approaches, most notably, the formation of heterostructures, as viable strategies to enhance photocatalytic efficiency and mitigate the aforementioned drawbacks. The green synthesis of metal sulfides, aligned with the principles of green chemistry, offers a promising route toward the development of sustainable and environmentally friendly water treatment technologies. Full article

With increasing urban economic development, some industrial parks and residential areas are being situated adjacent to each other, creating a potential risk of soil and groundwater contamination from the wastewater and solid waste produced by enterprises. This contamination poses a threat to the health of nearby residents. Currently, groundwater pollution prevention and control zoning in China primarily targets groundwater environmental pollution risks and does not consider the health risks associated with groundwater exposure in industry–city integration areas. Therefore, a scientific assessment of environmental risks in industry–city integration areas is essential for effectively managing groundwater pollution. This study focuses on the high frequency and rapid pace of human activities in industry–city integration areas. It combines health risk assessment and groundwater pollution simulation results with traditional groundwater pollution control classification outcomes to develop a groundwater pollution risk zoning framework specifically suited to these integrated areas. Using this framework, we systematically assessed groundwater pollution risks in a representative industry–city integration area in the middle reaches of the Yangtze River in China and delineated groundwater pollution risk zones to provide a scientific basis for local groundwater environmental management. The assessment results indicate that the total area of groundwater pollution risk control zones is 30.37 km², accounting for 19.06% of the total study area. The first-level control zone covers 5.38 km² (3.38% of the total area), while the secondary control zone spans 24.99 km² (15.68% of the total area). The first-level control zone is concentrated within industrial clusters, whereas the secondary control zone is widely distributed throughout the region. In comparison to traditional assessment methods, the zoning results derived from this study are more suitable for industry–city integration areas. This study also provides groundwater management recommendations for such areas, offering valuable insights for groundwater control in integrated industrial–residential zones. Full article