Search Results (4,260)

To address the obstacle-avoidance path-planning requirements of dual-arm robots operating in complex environments, such as chemical laboratories and biomedical workstations, this paper proposes ODSN-RRT (optimization-direction-step-node RRT), an efficient planner based on rapidly-exploring random trees (RRT). ODSN-RRT integrates three key optimization strategies. First, a two-stage sampling-direction strategy employs goal-directed growth until collision, followed by hybrid random-goal expansion. Second, a dynamic safety step-size strategy adapts each extension based on obstacle size and approach angle, enhancing collision detection reliability and search efficiency. Third, an expansion-node optimization strategy generates multiple candidates, selects the best by Euclidean distance to the goal, and employs backtracking to escape local minima, improving path quality while retaining probabilistic completeness. For collision checking in the dual-arm workspace (self and environment), a cylindrical-spherical bounding-volume model simplifies queries to line-line and line-sphere distance calculations, significantly lowering computational overhead. Redundant waypoints are pruned using adaptive segmental interpolation for smoother trajectories. Finally, a master-slave planning scheme decomposes the 14-DOF problem into two 7-DOF sub-problems. Simulations and experiments demonstrate that ODSN-RRT rapidly generates collision-free, high-quality trajectories, confirming its effectiveness and practical applicability. Full article

Resistive stretching sensors are currently used in healthcare robotics due to their ability to vary electrical resistance when subjected to mechanical strain. However, commercial sensors often lack the softness required for integration into soft structures. This study presents a detailed methodology to characterize fabric-based resistive stretching sensors, focusing on both static and dynamic performance, for application in a smart vascular simulator for surgical training. Five sensors, called #1–#5, were developed using conductive fabrics integrated into soft silicone. Stability and fatigue tests were performed to evaluate their behavior. The surface structure and fiber distribution were analyzed using digital microscopy and scanning electron microscopy, while element analysis was performed via Energy-Dispersive X-ray Spectroscopy. Sensors #1 and #3 are the most stable with a low relative standard deviation and good sensitivity at low strains. Sensor #3 showed the lowest hysteresis, while sensor #1 had the widest operating range (0–30% strain). Although all sensors showed non-monotonic behavior across 0–100% strain, deeper investigation suggested that the sensor response depends on the configuration of conductive paths within and between fabric layers. Soft fabric-based resistive sensors represent a promising technical solution for physical simulators for surgical training. Full article

Path planning for picking safflowers is a key component in ensuring the efficient operation of robotic safflower-picking systems. However, existing single-arm picking devices have become a bottleneck due to their limited operating range, and a breakthrough in multi-arm cooperative picking is urgently needed. To address the issue of inadequate adaptability in current path planning strategies for dual-arm systems, this paper proposes a novel path planning method for dual-arm picking (LTSACO). The technique centers on a dynamic-weight heuristic strategy and achieves optimization through the following steps: first, the K-means clustering algorithm divides the target area; second, the heuristic mechanism of the Ant Colony Optimization (ACO) algorithm is improved by dynamically adjusting the weight factor of the state transition probability, thereby enhancing the diversity of path selection; third, a 2-OPT local search strategy eliminates path crossings through neighborhood search; finally, a cubic Bézier curve heuristically smooths and optimizes the picking trajectory, ensuring the continuity of the trajectory’s curvature. Experimental results show that the length of the parallelogram trajectory, after smoothing with the Bézier curve, is reduced by 20.52% compared to the gantry trajectory. In terms of average picking time, the LTSACO algorithm reduces the time by 2.00%, 2.60%, and 5.60% compared to DCACO, IACO, and the traditional ACO algorithm, respectively. In conclusion, the LTSACO algorithm demonstrates high efficiency and strong robustness, providing an effective optimization solution for multi-arm cooperative picking and significantly contributing to the advancement of multi-arm robotic picking systems. Full article

(1) Minimally invasive techniques are standard in colorectal surgery, though complete mesocolic excision (CME) with central lymphadenectomy remains technically demanding. Robotic systems may address these challenges. While the DaVinci system is well established, the modular Dexter system allows rapid switching between laparoscopy and robotics. (2) This prospective single-surgeon study compared right hemicolectomy with CME and intracorporeal anastomosis using Dexter, DaVinci, and conventional laparoscopy in 75 patients (25 per group) at a German high-volume center. Outcomes assessed included operative time, complications, lymph node yield, and CME quality. (3) Mean operative time was longest with DaVinci (190.5 min) versus Dexter (164.8 min) and laparoscopy (152.6 min). Intracorporeal anastomosis was more frequent in robotic groups. No significant differences were found in lymph node yield, CME quality, postoperative complications, length of stay, or survival. (4) The ability to convert briefly to laparoscopy during Dexter procedures helped manage challenging steps, especially during the learning curve. The results suggest that Dexter is a safe, feasible alternative to established robotic and laparoscopic techniques, with the added benefits of flexibility and integration into existing workflows. Full article

Small and medium-sized enterprises (SMEs) in the manufacturing sector often struggle to make effective use of production data due to fragmented systems and limited digital infrastructure. This paper presents a case study of implementing an AI-enhanced digital twin in a custom sportswear manufacturing SME developed under the AI and Robotics Estonia (AIRE) initiative. The solution integrates real-time production data collection using the Digital Manufacturing Support Application (DIMUSA); data processing and control; clustering-based data analysis; and virtual simulation for evaluating improvement scenarios. The framework was applied in a live production environment to analyze workstation-level performance, identify recurring bottlenecks, and provide interpretable visual insights for decision-makers. K-means clustering and DBSCAN were used to group operational states and detect process anomalies, while simulation was employed to model production flow and assess potential interventions. The results demonstrate how even a lightweight AI-driven system can support human-centered decision-making, improve process transparency, and serve as a scalable foundation for Industry 5.0-aligned digital transformation in SMEs. Full article

In response to the challenges associated with weld treatment during the on-site corrosion protection of hydraulic steel gates, this paper proposes a method utilizing a magnetic adsorption climbing robot to perform corrosion protection operations. Firstly, a magnetic adsorption climbing robot with a multi-wheel independent drive configuration is proposed as a mobile platform. The robot body consists of six joint modules, with the two middle joints featuring adjustable suspension. The joints are connected in series via an EtherCAT bus communication system. Secondly, the kinematic model of the climbing robot is analyzed and a PID trajectory tracking control method is designed, based on the kinematic model and trajectory deviation information collected by the vision system. Subsequently, the proposed kinematic model and trajectory tracking control method are validated through Python3 simulation and actual operation tests on a curved trajectory, demonstrating the rationality of the designed PID controller and control parameters. Finally, an intelligent software system for weld defect detection based on computer vision is developed. This system is demonstrated to conduct defect detection on images of the current weld position using a trained model. Full article

The commercialization of selective broccoli harvesters, a critical response to agricultural labor shortages, is hampered by end effectors with large operational envelopes and poor adaptability to complex field conditions. To address these limitations, this study developed and evaluated a novel end-effector with an integrated transverse cutting mechanism and a foldable grasping cavity. Unlike conventional fixed cylindrical cavities, our design utilizes actuated grasping arms and a mechanical linkage system to significantly reduce the operational footprint and enhance maneuverability. Key design parameters were optimized based on broccoli morphological data and experimental measurements of the maximum stem cutting force. Furthermore, dynamic simulations were employed to validate the operational trajectory and ensure interference-free motion. Field tests demonstrated an operational success rate of 93.33% and a cutting success rate of 92.86%. The end effector successfully operated in dense planting environments, effectively avoiding interference with adjacent broccoli heads. This research provides a robust and promising solution that advances the automation of broccoli harvesting, paving the way for the commercial adoption of robotic harvesting technologies. Full article

Background: Oncocytoma and angiomyolipoma (AML) are benign renal tumors that may mimic malignant lesions on imaging. With the increasing use of partial nephrectomy (PN) for renal masses, accurate preoperative characterization of these lesions is essential. This study highlights the role of partial nephrectomy as a valuable diagnostic tool in situations where imaging is inconclusive or raises concern for malignancy without definitive confirmation. In the absence of a reliable preoperative diagnosis, partial nephrectomy provides direct histologic verification with minimal perioperative morbidity. Moreover, it offers curative potential when malignancy is present. By achieving both diagnostic certainty and renal preservation, this approach is well-suited for clinical scenarios in which imaging ambiguity might otherwise result in overtreatment through radical surgery or undertreatment Material and methods: in this retrospective study, we reviewed our 5-year experience (2019–2024), 188 partial nephrectomies—including bilateral procedures and operations on solitary kidneys—using robotic and open approaches. All of these 30 tumors were solid renal masses with indeterminate imaging features or suspicious characteristics suggestive of malignancy, further underscoring the limitations of current preoperative diagnostic modalities. Results: Histopathological evaluation confirmed benign renal tumors in 30 cases, with oncocytoma diagnosed in 18 cases (16 robotic, 2 open) and AML in 12 cases (9 robotic, 3 open). Conclusions: Even when imaging raises suspicion of malignancy or remains inconclusive, many small renal masses are ultimately confirmed as benign upon histopathological examination. This study underscores the diagnostic uncertainty associated with small renal tumors and highlights the value of partial nephrectomy as a decisive diagnostic intervention. In situations where non-invasive modalities fail to provide definitive answers, partial nephrectomy offers tissue confirmation with minimal morbidity. Furthermore, when malignancy is present, this approach ensures appropriate oncologic management while preserving renal function. Our findings support the integration of this strategy into routine clinical practice, particularly when diagnostic clarity is essential for guiding safe and effective treatment. Full article

We propose a data-efficient framework for automating sowing operations by agricultural robots in densely mixed polyculture environments. This study addresses the challenge of enabling robots to identify suitable sowing positions with minimal labeled data by integrating image-based field sensing with expert agricultural knowledge. We collected 84 RGB-depth images from seven field sites, labeled by synecological farming practitioners of varying proficiency levels, and trained a regression model to estimate optimal sowing positions and seeding quantities. The model’s predictions were comparable to those of intermediate-to-advanced practitioners across diverse field conditions. To implement this estimation in practice, we mounted a Kinect v2 sensor on a robot arm and integrated its 3D spatial data with axis-specific movement control. We then applied a trajectory optimization algorithm based on the traveling salesman problem to generate efficient sowing paths. Simulated trials incorporating both computation and robotic control times showed that our method reduced sowing operation time by 51% compared to random planning. These findings highlight the potential of interpretable, low-data machine learning models for rapid adaptation to complex agroecological systems and demonstrate a practical approach to combining structured human expertise with sensor-based automation in biodiverse farming environments. Full article

Robotics has emerged as a transformative discipline at the intersection of the engineering, computer science, and cognitive sciences. This state-of-the-art review explores the current trends, methodologies, and challenges in both robotics research and education. This paper presents a comprehensive review of the evolution of robotics, tracing its development from early automation to intelligent, autonomous systems. Key enabling technologies, such as Artificial Intelligence (AI), soft robotics, the Internet of Things (IoT), and swarm intelligence, are examined along with real-world applications in healthcare, manufacturing, agriculture, and sustainable smart cities. A central focus is placed on robotics education, where hands-on, interdisciplinary learning is reshaping curricula from K–12 to postgraduate levels. This paper analyzes instructional models including project-based learning, laboratory work, capstone design courses, and robotics competitions, highlighting their effectiveness in developing both technical and creative competencies. Widely adopted platforms such as the Robot Operating System (ROS) are briefly discussed in the context of their educational value and real-world alignment. Through case studies, institutional insights, and synthesis of academic and industry practices, this review underscores the vital role of robotics education in fostering innovation, systems thinking, and workforce readiness. The paper concludes by identifying the key challenges and future directions to guide researchers, educators, industry stakeholders, and policymakers in advancing robotics as both technological and educational frontiers. Full article

Accurate weed detection in soybean fields is essential for enhancing crop yield and reducing herbicide usage. This study proposes a YOLO-SW model, an improved version of YOLOv8, to address the challenges of detecting weeds that are highly similar to the background in natural environments. The research stands out for its novel integration of three key advancements: the Swin Transformer backbone, which leverages local window self-attention to achieve linear O(N) computational complexity for efficient global context capture; the CARAFE dynamic upsampling operator, which enhances small target localization through context-aware kernel generation; and the RTDETR encoder, which enables end-to-end detection via IoU-aware query selection, eliminating the need for complex post-processing. Additionally, a dataset of six common soybean weeds was expanded to 12,500 images through simulated fog, rain, and snow augmentation, effectively resolving data imbalance and boosting model robustness. The experimental results highlight both the technical superiority and practical relevance: YOLO-SW achieves 92.3% mAP@50 (3.8% higher than YOLOv8), with recognition accuracy and recall improvements of 4.2% and 3.9% respectively. Critically, on the NVIDIA Jetson AGX Orin platform, it delivers a real-time inference speed of 59 FPS, making it suitable for seamless deployment on intelligent weeding robots. This low-power, high-precision solution not only bridges the gap between deep learning and precision agriculture but also enables targeted herbicide application, directly contributing to sustainable farming practices and environmental protection. Full article

Steel lazy wave risers (SLWRs) are critical in offshore hydrocarbon transport for linking subsea wells to floating production facilities in deep-water environments. The incorporation of buoyancy modules reduces curvature-induced stress concentrations in the touchdown zone (TDZ); however, extended operational exposure under cyclic environmental and operational loads results in repeated seabed contact. This repeated interaction modifies the seabed soil over time, gradually forming a trench and altering the riser configuration, which significantly impacts stress patterns and contributes to fatigue degradation. Accurately reconstructing the riser’s evolving profile in the TDZ is essential for reliable fatigue life estimation and structural integrity evaluation. This study proposes a simulation-based framework for the autonomous tracking of SLWRs using a fin-actuated autonomous underwater vehicle (AUV) equipped with a monocular camera and multibeam echosounder. By fusing visual and acoustic data, the system continuously estimates the AUV’s relative position concerning the riser. A dedicated image processing pipeline, comprising bilateral filtering, edge detection, Hough transform, and K-means clustering, facilitates the extraction of the riser’s centerline and measures its displacement from nearby objects and seabed variations. The framework was developed and validated in the underwater unmanned vehicle (UUV) Simulator, a high-fidelity underwater robotics and pipeline inspection environment. Simulated scenarios included the riser’s dynamic lateral and vertical oscillations, in which the system demonstrated robust performance in capturing complex three-dimensional trajectories. The resulting riser profiles can be integrated into numerical models incorporating riser–soil interaction and non-linear hysteretic behavior, ultimately enhancing fatigue prediction accuracy and informing long-term infrastructure maintenance strategies. Full article

Collaborative robots are vital in Industry 5.0 operations. They are utilized to perform tasks in collaboration with humans or other robots to increase overall production efficiency and execute complex tasks. Aiming at a comprehensive approach to assembly processes and highlighting new applications of collaborative robots, this paper presents the development of a digital twin (DT) for the design, monitoring, optimization and simulation of robots’ deployment in assembly cells. The DT integrates information from both the physical and virtual worlds to design the trajectory of collaborative robots. The physical information about the industrial environment is replicated within the DT in a computationally efficient way that aligns with the requirements of the path planning algorithm and the DT’s objectives. An enhanced artificial fish swarm algorithm (AFSA) is utilized for the 4D path planning optimization, taking into account dynamic and static obstacles. Finally, the proposed framework is utilized for the examination of a case in which four industrial robotic arms are collaborating for the assembly of an industrial component. Full article

Kirigami-inspired geometries offer a lightweight, bioinspired strategy for friction enhancement and anchoring in soft robotics. This study presents a bioinspired kirigami structure designed to enhance the anchoring performance of soft robotic systems through systematic geometric and actuation parameter optimization. Drawing inspiration from the anisotropic friction mechanisms observed in reptilian scales, we integrated linear, triangular, trapezoidal, and hybrid kirigami cuts onto flexible plastic sheets. A compact 12 V linear actuator enabled cyclic actuation via a custom firmware loop, generating controlled buckling and directional friction for effective locomotion. Through experimental trials, we quantified anchoring efficiency using crawling distance and stride metrics across multiple cut densities and actuation conditions. Among the tested configurations, the triangular kirigami with a 4 × 20 unit density on 100 µm PET exhibited the most effective performance, achieving a stride efficiency of approximately 63% and an average crawling speed of ~47 cm/min under optimized autonomous operation. A theoretical framework combining buckling mechanics and directional friction validated the observed trends. This study establishes a compact, tunable anchoring mechanism for soft robotics, offering strong potential for autonomous exploration in constrained environments. Full article

Modern industrial ecosystems, particularly those embracing Industry 4.0, increasingly depend on coherent optical networks operating at 400 Gbps and beyond. These high-capacity infrastructures, coupled with advanced digital signal processing and phase-sensitive detection, enable real-time data exchange for automated manufacturing, robotics, and interconnected factory systems. However, they introduce multilayer security challenges—ranging from hardware synchronization gaps to protocol overhead manipulation. Moreover, the rise of large-scale quantum computing intensifies these threats by potentially breaking classical key exchange protocols and enabling the future decryption of stored ciphertext. In this paper, we present a systematic vulnerability analysis of coherent optical networks that use OTU4 framing, Media Access Control Security (MACsec), and 400G ZR+ transceivers. Guided by established risk assessment methodologies, we uncover critical weaknesses affecting management plane interfaces (e.g., MDIO and I²C) and overhead fields (e.g., Trail Trace Identifier, Bit Interleaved Parity). To mitigate these risks while preserving the robust data throughput and low-latency demands of industrial automation, we propose a post-quantum security framework that merges spectral phase masking with multi-homodyne coherent detection, strengthened by quantum key distribution for key management. This layered approach maintains backward compatibility with existing infrastructure and ensures forward secrecy against quantum-enabled adversaries. The evaluation results show a substantial reduction in exposure to timing-based exploits, overhead field abuses, and cryptographic compromise. By integrating quantum-safe measures at the optical layer, our solution provides a future-proof roadmap for network operators, hardware vendors, and Industry 4.0 stakeholders tasked with safeguarding next-generation manufacturing and engineering processes. Full article