Search Results (485)

The incorporation of waste polyethylene terephthalate (PET) as a modifier for asphalt presents a promising approach to addressing the environmental pollution associated with waste plastics while simultaneously extending the service life of road surfaces. This study investigates the fundamental physical properties and rheological properties of asphalt modified with waste PET at both high and low temperatures. Utilizing the theory of fractional derivatives, performance evaluation indicators, such as the deformation factor and viscoelasticity factor, have been developed for the assessment of waste PET-modified asphalt. The underlying mechanism of this modification was examined through scanning electron microscopy and Fourier transform infrared spectroscopy. The results indicate that the addition of waste PET enhances the high-temperature stability of the base asphalt but reduces its resistance to cracking at low temperatures. The fractional derivative model effectively describes the dynamic shear rheological properties of waste PET-modified asphalt, achieving a maximum correlation coefficient of 0.99991. Considering the performance of modified asphalt at both high and low temperatures, the optimal concentration of waste PET was determined to be 6%. At this concentration, the minimum creep stiffness of the PET-modified asphalt was approximately 155 MPa at −6 °C. Additionally, the rutting factor of the waste PET-modified asphalt achieved a maximum value of 527.12 KPa at 52 °C. The interaction between waste PET and base asphalt was primarily physical, with mutual adsorption leading to the formation of a spatial network structure that enhanced the deformation resistance of the asphalt. This study provides a theoretical foundation and technical support for the engineering application of waste PET as a modifier in asphalt. Full article

Asphalt pavement cracking is an important factor affecting its service life. Under certain conditions, the self-healing behavior of asphalt itself can repair pavement cracks. However, the self-healing ability of asphalt itself is limited. In order to strengthen the self-healing ability of asphalt, the microcapsule wrapped with a repair agent is pre-mixed into the asphalt mixture. When the crack occurs and spreads to the surface of the microcapsule, the microcapsule ruptures and the healing agent flows out to realize the self-healing of the crack. Current microcapsules are mostly prepared with healing agents and bio-oil as core materials, and their high-temperature resistance to rutting is poor. While the epoxy resin contains a three-membered cyclic ether, it can undergo ring-opening polymerization to bond and repair the asphalt matrix. In addition, research on microcapsules mainly focuses on the self-healing properties of microcapsule-modified asphalt. In fact, before adding microcapsules to asphalt to improve its self-healing performance, it is necessary to ensure that the asphalt has a good road performance. On this basis, the self-healing performance of asphalt is improved, thereby extending the service life of asphalt pavement. Therefore, two-component epoxy self-healing microcapsules (E-mic and G-mic) were first prepared in this paper. Then, a temperature scanning test, rheological test of bending beams, and linear amplitude scanning test were, respectively, conducted for the microcapsule/asphalt to evaluate its road performance, including the high-temperature performance, low-temperature crack resistance, and fatigue performance. Finally, the self-healing performance of microcapsules/asphalt was tested. The results showed that the self-developed epoxy self-healing microcapsules were well encapsulated and presented as spherical micron-sized particles. The average particle size of the E-mic was approximately 23.582 μm, while the average particle size of the G-mic was approximately 22.440 μm, exhibiting a good normal distribution. In addition, they can remain intact and unbroken under high-temperature conditions. The results of road performance tests indicated that the microcapsule/asphalt mixture exhibits an excellent high-temperature resistance to permanent deformation, low-temperature crack resistance, and fatigue resistance. The self-healing test demonstrated that the microcapsule/asphalt exhibited an excellent self-healing performance. When the microcapsule content was 4%, the self-healing rate reached its optimal level of 67.8%, which was 149.2% higher than that of the base asphalt. Full article

Efficient detection of road surface defects is vital for timely maintenance and traffic safety. This study introduces a novel AI-powered web framework, TriRoad AI, that integrates multiple versions of the You Only Look Once (YOLO) object detection algorithms—specifically YOLOv8 and YOLOv11—for automated detection of potholes and cracks. A user-friendly browser interface was developed to enable real-time image analysis, confidence-based prediction filtering, and severity-based geolocation mapping using OpenStreetMap. Experimental evaluation was conducted using two datasets: one from online sources and another from field-collected images in Ankara, Turkey. YOLOv8 achieved a mean accuracy of 88.43% on internet-sourced images, while YOLOv11-B demonstrated higher robustness in challenging field environments with a detection accuracy of 46.15%, and YOLOv8 followed closely with 44.92% on mixed field images. The Gemini AI model, although highly effective in controlled environments (97.64% detection accuracy), exhibited a significant performance drop of up to 80% in complex field scenarios, with its accuracy falling to 18.50%. The proposed platform’s uniqueness lies in its fully integrated, browser-based design, requiring no device-specific installation, and its incorporation of severity classification with interactive geospatial visualization. These contributions address current gaps in generalization, accessibility, and practical deployment, offering a scalable solution for smart infrastructure monitoring and preventive maintenance planning in urban environments. Full article

Asphalt pavement cracking represents a prevalent form of deterioration that significantly compromises road performance and safety under the combined effects of environmental factors and traffic loading. Crack sealing has emerged as a widely adopted and cost-effective preventive maintenance strategy that restores the pavement’s structural integrity and extends service life. This paper presents a systematic review of the development of crack sealing technology, conducts a comparative analysis of conventional sealing materials (including emulsified asphalt, hot-applied asphalt, polymer-modified asphalt, and rubber-modified asphalt), and examines the existing performance evaluation methodologies. Critical failure mechanisms are thoroughly investigated, including interfacial bond failure resulting from construction defects, material aging and degradation, hydrodynamic scouring effects, and thermal cycling impacts. Additionally, this review examines advanced sensing methodologies for detecting premature sealant failure, encompassing both non-destructive testing techniques and active sensing technologies utilizing intelligent crack sealing materials with embedded monitoring capabilities. Based on current research gaps, this paper identifies future research directions to guide the development of intelligent and sustainable asphalt pavement crack repair technologies. The proposed research framework provides valuable insights for researchers and practitioners seeking to improve the long-term effectiveness of pavement maintenance strategies. Full article

In high-elevation mining areas, the roadbeds of certain surface ore haul roads are predominantly composed of sandstone. These sandstones are exposed to cold climatic conditions for long periods and are highly susceptible to erosion by the effects of freeze–thaw, which can degrade their support properties. This paper investigates the mechanism of strength deterioration of sandstone containing prefabricated cracks under cyclic loading and unloading after experiencing freeze–thaw. Sandstone specimens containing prefabricated cracks were prepared and subjected to 0, 20, 40, 60, and 80 freeze–thaw cycle tests. The strength changes were tested, and the crack extension process was analyzed using numerical simulation techniques. The study results show the following: 1. The wave propagation speed within the sandstone is more sensitive to changes in the number of freeze–thaw cycles. In contrast, mass damage shows significant changes only when more freeze–thaw cycles are experienced. 2. As the number of freeze–thaw cycles increases, the frequency of energy release from the numerical model accelerates. 3. The trend of the Cumulative Strain Difference (${\epsilon }_c$) reflects that the plastic strain difference between numerical simulation and actual measurement gradually decreases with increasing stress cycle level. 4. With the increase in freeze–thaw cycles, the damage morphology of the specimen undergoes a noticeable change, which is gradually transformed from monoclinic shear damage to X-shaped conjugate surface shear damage. 5. The number of tensile cracks dominated throughout the cyclic loading and unloading process, but with the increase in freeze–thaw cycles, the percentage of shear cracks increased. As the freeze–thaw cycles increase, sandstones are more inclined to undergo shear damage. These findings are important guidelines for road design and maintenance in alpine mining areas. Full article

Structural cracks are internal distresses that cannot be observed from pavement surfaces. However, the existing evaluation methods for asphalt pavement structures lack the consideration of these cracks, which are crucial for accurate pavement assessment and effective maintenance planning. This study develops a novel framework combining a three-dimensional (3D) ground penetrating radar (GPR) and finite element modeling (FEM) to evaluate the severity of structural cracks. First, the size and depth development of structural cracks on a four-layer asphalt pavement were determined using the 3D GPR. Then, the range of influence of the structural crack on structural bearing capacity was analyzed based on 3D FEM simulation model. Structural cracks have a distance-dependent diminishing influence on the deflection in the horizontal direction, with the most pronounced effects within a 20-cm width zone surrounding the cracks. Finally, two indices have been proposed: the pavement structural crack index (PSCI) to assess the depth of crack damage and the structural crack reflection ratio (SCRR) to evaluate surface reflection. Besides, PSCI and SCRR are used to classify the severities of structural cracks: none, low, and high. The threshold between none/low damage is a structural crack damage rate of 0.19%, and the threshold between low/high damage is 0.663%. An experiment on a 132-km expressway indicated that the proposed method achieved 94.4% accuracy via coring. The results also demonstrate the strong correlation between PSCI and pavement deflection (R² = 0.92), supporting performance-based maintenance strategies. The results also demonstrate the correlation between structural and surface cracks, with 65.8% of the cracked sections having both structural and surface cracks. Full article

With the increasing demand for highway maintenance, enhancing the resource utilization of reclaimed asphalt pavement (RAP) has become an urgent and widely studied issue. Although foam asphalt cold recycling technology offers significant benefits in terms of resource utilization and energy saving, it still faces challenges, particularly the poor stability of foam asphalt mixtures. This study focuses on optimizing the performance of foam asphalt recycled mixtures through interface modification, aiming to promote the widespread application of foam asphalt cold recycling technology. Specifically, the research follows these steps: First, the optimal mix ratio of the recycled mixtures was determined based on the fundamental properties of foam asphalt and RAP. Then, zinc oxide, silane coupling agents, and amine anti-stripping agents were introduced to modify the recycled mixtures. At last, a series of tests were conducted to comprehensively evaluate improvements in road performance. The results indicate that the silane coupling agent enhances the low-temperature performance and fatigue. The fracture energy reached 526.71 J/m². Zinc oxide improves the low-temperature cracking resistance and dry shrinkage performance. Amine anti-stripping agents have minimal impact on the low-temperature performance. The linear shrinkage was reduced by 2.6%. The results of TOPSIS indicated that silane coupling agent modification exhibits superior fatigue resistance and low-temperature performance, achieving the highest comprehensive score of 0.666. Although amine-based anti-stripping agents improve fatigue life, they are not suitable for modifying foamed asphalt mixtures due to their detrimental effects on low-temperature performance and moisture resistance. Full article

This study investigates the performance improvement of asphalt binders through the incorporation of two polymers, polyvinyl chloride (PVC) and styrene–butadiene–styrene (SBS), with asphalt grade (60–70), to address the growing demand for durable and climate-resilient pavement materials, particularly in areas exposed to high temperatures like Iraq. The main objective is to improve the mechanical characteristics, thermal stability, and workability of typical asphalt mixtures to extend pavement lifespan and lessen maintenance costs. A thorough set of rheological, physical, morphological, and workability tests was performed on asphalt binders modified with varying content of PVC (3%, 5%, 7%, and 9%) and SBS (3%, 4%, and 5%). The significance of this research lies in optimizing binder formulations to enhance resistance to deformation and failure modes such as rutting and thermal cracking, which are common in extreme climates. The results indicate that PVC enhances performance grade (PG), softening point, and viscosity, although higher contents (7% and 9%) exceeded penetration grade specifications. SBS-modified binders demonstrated marked improvements in softening point, viscosity, and rutting resistance, with PG values increasing from PG64-x (unmodified) to PG82-x at 5% SBS. Fluorescence microscopy confirmed optimal polymer dispersion at 5% concentration for both SBS and PVC, ensuring compatibility with the base asphalt. Workability testing revealed that SBS-modified mixtures exhibited higher torque requirements, indicating reduced workability compared to both PVC-modified and unmodified binders. These findings offer valuable insights for the design of high-performance asphalt mixtures suitable for hot-climate applications and contribute to the development of more durable and cost-effective road infrastructure. Full article

This paper is devoted to determining the influence of some risk elements on the asphalted surfaces of bridge ramps, in order to detect possible damages or potential collapses of the embankment. The main factors will be characterized by (a) movements of floating reinforced concrete (r.c.) slab over the embankment connected to the border of the bridge; (b) longitudinal cracks on the asphalt produced by small sliding deformations; (c) emerging vegetation from the slope of the ramps. The authors propose a set of possible techniques to determine level of risk indicators, illustrating a set of case studies related to several asphalt roads approaching r.c. bridges. Full article

The application of superhydrophobic (SH) coatings in road construction has attracted growing attention due to their potential to improve surface durability, reduce cracking, and enhance skid resistance. Among various materials, SiO₂ nanoparticles have emerged as key components in SH coatings by contributing essential surface roughness and hydrophobicity. This review paper analyzes the role of SiO₂ nanoparticles in enhancing the water-repellent properties of coatings applied to road surfaces, particularly concrete and asphalt. Emphasis is placed on their influence on road longevity, reduced maintenance, and overall performance under adverse weather conditions. Furthermore, this review compares functionalization techniques for SiO₂ using different hydrophobic modifiers, evaluating their efficiency, cost effectiveness, and scalability for large-scale infrastructure. In addition to highlighting recent advancements, this study discusses persistent challenges—including environmental compatibility, mechanical wear, and long-term durability—that must be addressed for practical implementation. By offering a critical assessment of current approaches and future prospects, this short review aims to guide the development of robust, high-performance SH coatings for sustainable road construction. Full article

With the continuous expansion of highway networks and rapid advancements in the transportation industry, the need for highway maintenance and reconstruction has become increasingly urgent. Resonant rubblization technology generates an interlocking structure within the pavement layer by producing diagonal cracks at angles of 35–40°, thereby significantly enhancing load-bearing capacity and structural stability. As a result, this technique offers substantial benefits, including a marked reduction in reflective cracking, efficient reuse of existing concrete slabs (with a utilization rate exceeding 85%), reduced construction costs (by 15–30% compared to conventional methods), and faster construction speeds—up to 7000 square yards per day. Consequently, resonant rubblization has emerged as a key method for rehabilitating aging cement concrete pavements. Building on this foundation, this paper reviews the fundamental principles of resonant rubblization technology by synthesizing global research findings and engineering case studies. It provides a comprehensive analysis of the historical development, equipment design, construction principles, and practical application outcomes of resonant rubblization, with particular attention to its effects on pavement structure, load-bearing capacity, and long-term stability. Future research should focus on developing more realistic subgrade models, improving evaluation methods for post-rubblization pavement performance, and advancing the intelligentization of resonant equipment. The ultimate goal is to enhance the quality of road maintenance and repair, ensure road safety, and promote the development of long-life, sustainable road infrastructure through the continued advancement and application of resonant rubblization technology. Full article

Distributed optical fiber sensing (DOFS) is an advanced tool for structural health monitoring (SHM), offering high precision, wide measurement range, and real-time as well as long-term monitoring capabilities. It enables real-time monitoring of both temperature and strain information along the entire optical fiber line, providing a novel approach for safety monitoring and structural health assessment in transportation engineering. This paper first introduces the fundamental principles and classifications of DOFS technology and then systematically reviews the current research progress on Brillouin scattering-based DOFS. By analyzing the monitoring requirements of various types of transportation infrastructure, this paper discusses the applications and challenges of this technology in SHM and damage detection for roads, bridges, tunnels, and other infrastructure, particularly in identifying and tracking cracks, deformations, and localized damage. This review highlights the significant potential and promising prospects of Brillouin scattering technology in transportation engineering. Nevertheless, further research is needed to optimize sensing system performance and promote its widespread application in this field. These findings provide valuable references for future research and technological development. Full article

The research on nano titanium dioxide (nano-TiO₂)-modified asphalt has received increasing attention. However, further studies are required in order to ascertain the influence of the phenomenon under discussion on the rheological characteristics and ability to resist deformation of bitumen. In the present study, modified bitumen was formulated by adding nano titanium dioxide. Physical property tests, temperature scanning tests, frequency scanning tests, repeated creep recovery tests, bending creep stiffness tests, and long-term aging performance experiments were carried out on the specimen of asphalt that had undergone the process of modification in order to assess the rheological characteristics and ability to resist unrecoverable deformation of the modified bitumen at different temperatures, both high and low. The outcomes of the repeated creep recovery experiment were analyzed using Burgers and fractional derivative models. The microstructure of nano-TiO₂ high-viscosity modified asphalt was observed by Scanning Electron Microscope(SEM). In order to ascertain the manner in which base bitumen and nano-TiO₂ interact, Fourier transform infrared spectroscopy (FTIR) was utilized in the study. The results show that the thermal stability and prolonged aging resistant properties of the modified bitumen binder improved, but nano-TiO₂ made the asphalt binder weaker and more likely to crack at lower temperatures. Taking into account the variation in the road performance of the bitumen binder, 6% is recommended as the optimal amount of nano-TiO₂. Nano-TiO₂ was mainly uniformly distributed in asphalt and nano-TiO₂ was physically mixed with asphalt. In comparison with the Burgers model, the present fractional derivative empirical creep model can fit the creep test data of the asphalt binder well with the advantages of high accuracy and few parameters. The research results provide a reference for promoting the implementation of modified bitumen incorporating nano-TiO₂. Full article

Semi-flexible pavement (SFP) materials have garnered extensive application and research attention owing to their exceptional deformation resistance. The crack resistance of SFP materials constitutes a critical aspect of their road performance. This study conducts a comprehensive analysis of the crack resistance of SFP materials through material characterization and structural mechanical response evaluation. To assess the cracking behavior of SFP materials across the entire temperature spectrum, three experimental methodologies were employed: low-temperature flexural tensile testing, indirect tensile testing, and semi-circular bending tensile testing. Experimental findings reveal that SFP materials exhibit superior crack resistance compared to SMA-13 under ambient and elevated temperature conditions, while demonstrating inferior performance relative to SMA-13 in low-temperature environments. Through a comparative analysis of structural mechanical responses between SMA-13 and SFP pavements, it was determined that the implementation of a single-layer SFP material can reduce pavement tensile strain by 30–50%. This investigation provides comprehensive insights into the crack resistance characteristics of SFP materials and offers valuable guidance for material selection in pavement structural design. Full article

The primary purpose of this paper is to investigate the impact of traffic wander on road pavement life for application in connected and autonomous vehicles. Research shows that in autonomous vehicles, drivers often follow the same path, leading to significant pavement damage on specific, well-defined paths. The paper examined the impact of traffic wander on pavement life by analysing two different wander distributions: normal and uniform. Based on the estimated pavement life for various pavement structures, a model that predicts the increase in pavement life due to traffic wander was developed for cracking and rutting prediction. The result of the research is the determination of relative pavement life influence functions, in which the variables are the traffic wander, asphalt layer thickness and subgrade stiffness. The obtained equations can be easily implemented for pavement service life extension evaluation. The model was also used to estimate the asphalt layer thickness as a function of the traffic expressed in terms of Equivalent Single Axle Load (ESALs). An analysis of the implications of the lateral distribution of traffic on the pavement thickness was presented. Significant reductions in the asphalt layer thickness of the pavement are achieved when wander is considered. Full article