Search Results (14,476)

Due to its lightweight and superior adsorption properties, carbon foam is frequently employed for the removal of heavy metal pollutants from aqueous solutions. In this study, a novel modified carbon foam (M-CF) was successfully synthesized for the effective removal of Pb²⁺ and Cd²⁺ from water. The synthesis involved partially substituting phenol with the liquefaction product of bamboo powder, followed by modification with a silane coupling agent (KH560) and foaming with n-hexane-loaded activated carbon (H/AC). The prepared carbon foam was comprehensively characterized, and its adsorption performance and mechanism for Pb²⁺ and Cd²⁺ in aqueous solution were investigated. The results showed that M-CF possessed a uniform and well-developed spherical pore structure and demonstrated excellent removal capacity for Cd²⁺ and Pb²⁺. The adsorption process conformed to the Sips isotherm model and the pseudo-second-order kinetic equation, with maximum adsorption capacities of 22.15 mg·g⁻¹ and 61.59 mg·g⁻¹ for Cd²⁺ and Pb²⁺, respectively. Mechanistic analysis revealed that the removal of Cd²⁺ and Pb²⁺ was a result of the synergistic effect of physisorption and chemisorption, accompanied by complexation. Furthermore, precipitates formed during the adsorption process were found to be mainly composed of hydroxides, carbonates, and PbS. This research demonstrates the efficacy of carbon foam prepared from bamboo powder waste as a partial phenol substitute for the efficient removal of Pb²⁺ and Cd²⁺ from water, thus expanding the preparation pathways for novel heavy metal adsorption materials. Full article

Lacrimal cysts (dacryops), which involve lacrimal tissue, are uncommon in dogs with an obscure/unclear pathogenesis. Compared to the current available literature, this report describes the clinicopathologic and immunohistochemical features of two cases of unusual dacryops in brachycephalic dogs. A three-year-old male Cane Corso was referred with a 1-month history of swelling ventromedial to the left eye associated with blepharospasm and epiphora. Furthermore, a severe lower and upper eyelid entropion and a deep corneal ulcer were present. B-mode ultrasonography and a CT scan revealed a subcutaneous cyst, closely adherent to the maxillary bone. Surgical removal and the correction of entropion were performed. No recurrence and/or complication was detected by seven-year follow-up. Histopathology revealed a cystic structure with single- to double-cell-layered, nonciliated, cuboidal epithelia. Alcian blue stain revealed rare, disseminated goblet cells admixed with epithelial cells. The epithelium was strongly Cytokeratin-positive by immunohistochemistry and appeared lined by several layers of smooth muscle actin (SMA)-positive myoepithelial cells. A 1-year-old male French Bulldog with a 3-month lesion of the third eyelid of the right eye. The lesion (15 mm × 7 mm) beneath the conjunctiva appeared pale-pink, smooth, and multilobulated. Excision was performed by blunt dissection through the conjunctiva on the palpebral surface of the third eyelid. Recovery was uncomplicated, and no recurrence has been noted at three-year follow-up. Cytology of the cystic fluid and histopathology and immunohistochemistry of the cyst wall revealed findings for case 1. To further characterize the SMA-positive spindle cells located directly beneath the cyst-lining epithelium, double-color immunofluorescence for SMA and p63 (a myoepithelial cell marker) was performed on the sample from case 2. The analysis revealed that the SMA-positive cells lacked p63 expression, indicating a non-myoepithelial phenotype. The histological findings in our cases are consistent with previous reports of canine dacryops. The positivity of immunohistochemical staining for SMA in cells directly beneath the epithelium of dacryops in the cases here described in two brachycephalic dogs is consistent with previous reports in dogs and horses but in contrast with a retrospective study about a human dacryops. These results support the conclusion that the pathogenesis of dacryops in dogs should exclude failure of ductular “neuromuscular” contractility. Full article

Background: In patients with familial adenomatous polyposis (FAP), the duodenum is another high-risk region for malignancy after the large bowel. However, endoscopic and surgical management differs for papillary lesions and adenomas located in other parts of the duodenum. The aim of the study was to present the principles of the endoscopic surveillance of extrapapillary polyps based on a single-center 14-year observational study. Methods: The retrospective analysis was carried out in 2010–24 on a group of 45 people enrolled in endoscopic surveillance of the upper gastrointestinal tract due to FAP. The evaluation was aimed at detecting the malignant transformation of extrapapillary duodenal adenomas, with a radical removal of high-risk lesions. The severity of polyposis in the subsequent years of observation as well as the effectiveness of routine polypectomy on downstaging according to the Spiegelmann score were also assessed. Results: Invasive duodenal cancer was not detected in any case; however, high-grade dysplasia (HGD) was confirmed in five patients. The severity of polyposis and the number of polyps with HGD increased in following examinations, but routine polypectomy performed mainly during the 4th and 5th endoscopies allowed for a transient decrease in the Spiegelman score. Finally, progression of duodenal polyposis was observed in 18 patients, another 4 experienced regression (downstaging) and in 23 cases the stage of severity did not change. In addition, five patients were diagnosed with LST-G lesions, which were removed without recurrence. Conclusions: The patient’s age correlates with the severity of polyposis and the risk of malignancy, but routine endoscopic resections eliminate potentially invasive lesions and contribute to disease regression expressed by the Spiegelmann score. The radical endoscopic therapy of extrapapillary duodenal lesions limits the indications for surgical procedures. Full article

This study evaluates the efficiency of sub-stoichiometric Ti₄O₇ titanium oxide anodes for the electrochemical degradation of glyphosate, a persistent herbicide classified as a probable carcinogen by the World Health Organization. After optimizing the process operating parameters (pH and current density), the mineralization efficiency and fate of degradation by-products of the treated solution were determined using a total organic carbon (TOC) analyzer and HPLC/MS, respectively. The results showed that at pH = 3, glyphosate degradation and mineralization are enhanced by the increased generation of hydroxyl radicals (^●OH) at the anode surface. A current density of 14 ${\mathrm{mA} \mathrm{cm}}^{-2}$ enables complete glyphosate removal with 77.8% mineralization. Compared with boron-doped diamond (BDD), ${\mathrm{Ti}}_4{\mathrm{O}}_7$ shows close performance for treatment of a concentrated glyphosate solution (0.41 mM), obtained after nanofiltration of a synthetic ionic solution (0.1 mM glyphosate), carried out using an NF-270 membrane at a conversion rate (Y) of 80%. At 10${ \mathrm{mA} \mathrm{cm}}^{-2}$ for 8 h, ${\mathrm{Ti}}_4{\mathrm{O}}_7$ achieved 81.3% mineralization with an energy consumption of 6.09 ${\mathrm{kWh} \mathrm{g}}^{-1}$ TOC, compared with 90.5% for BDD at 5.48 ${\mathrm{kWh} \mathrm{g}}^{-1}$ TOC. Despite a slight yield gap, ${\mathrm{Ti}}_4{\mathrm{O}}_7$ demonstrates notable efficiency under demanding conditions, suggesting its potential as a cost-effective alternative to BDD for glyphosate electro-oxidation. Full article

The efficient thermal management of cutting tools is critical for ensuring dimensional accuracy, surface integrity, and tool longevity, especially in the high-speed dry machining process. However, conventional cooling methods often fall short in reaching the heat-intensive zones near the cutting inserts. This study proposes a novel internal cooling strategy that integrates triply periodic minimal surface (TPMS) structures into the toolholder, aiming to enhance localized heat removal from the cutting region. The thermal-fluidic behaviors of four TPMS topologies (Gyroid, Diamond, I-WP, and Fischer–Koch S) were systematically analyzed under varying coolant velocities using computational fluid dynamics (CFD). Several key performance indicators, including the convective heat transfer coefficient, Nusselt number, friction factor, and thermal resistance, were evaluated. The Diamond and Gyroid structures exhibited the most favorable balance between heat transfer enhancement and pressure loss. The experimental validation confirmed the CFD prediction accuracy. The results establish a new design paradigm for integrating TPMS structures into toolholders, offering a promising solution for efficient, compact, and sustainable cooling in advanced cutting applications. Full article

Some children with autism may require additional support to meet academic expectations for comprehension. Because an extensive set of research links oral narration to listening and reading comprehension, the promotion of narrative-based skills may be a viable intervention approach. The purpose of this study was to examine the effect of narrative intervention with explicit strategy instruction on the listening and reading retells of children with autism after hearing and decoding novel stories. Four children with autism aged 7 and 9 years old participated in this multiple baseline across participants single-case experimental design study. Behavioral therapists delivered the narrative intervention, which included explicit instruction on the use of story grammar icons, to each child individually within the course of their therapy. Results showed that all participants improved their listening (TauU ES range = 0.64–1.06) and reading (TauU ES range = 0.72–1.15) retells, but they required extended use of the icon strategy to achieve the most benefit. When icons were completely removed, three of the four participants performed above baseline levels on the listening and reading comprehension measures. Full article

This study examines the use of a mass-abatement scalable system with managed aquifer recharge (MAR-MASS) as a sustainable solution for restoring salinized aquifers and improving water quality by removing dissolved salts. It offers a practical remediation approach for aquifers affected by salinization in coastal regions, agricultural areas, and contaminated sites, where variable-density flow poses a challenge. Numerical simulations assessed hydrogeological properties such as hydraulic conductivity, anisotropy, specific yield, mechanical dispersion, and molecular diffusion. A conceptual model integrated hydraulic conditions with spatial and temporal discretization using the FLOPY API for MODFLOW 6 and the IFM API for FEFLOW 10. Python algorithms were run within the high-performance computing (HPC) server, executing simulations in parallel to efficiently process a large number of scenarios, including both preprocessing input data and post-processing results. The study simulated 6950 scenarios, each modeling flow and transport processes over 3000 days of method implementation and focusing on mass extraction efficiency under different initial salinity conditions (3.5 to 35 kg/m³). The results show that the MAR-MASS effectively removed salts from aquifers, with higher hydraulic conductivity prolonging mass removal efficiency. Of the scenarios, 88% achieved potability (0.5 kg/m³) in under five years; among these, 79% achieved potability within two years, and 92% of cases with initial concentrations of 3.5–17.5 kg/m³ reached potability within 480 days. This study advances scientific knowledge by providing a robust model for optimizing managed aquifer recharge, with practical applications in rehabilitating salinized aquifers and improving water quality. Future research may explore MAR-MASS adaptation for diverse hydrogeological contexts and its long-term performance. Full article

Background: Prosthetic cementation using the biologically oriented preparation technique (BOPT) presents challenges in removing excess cement from the gingival sulcus, due to the absence of a finishing line and the impossibility of using absolute isolation with a rubber dam. This study aimed to evaluate the effectiveness of relative isolation using polytetrafluoroethylene (PTFE) tape in reducing cement retention during BOPT cementation. Methods: Fifteen 3D-printed resin models were created from an intraoral scan of a patient restored with BOPT in both upper central incisors. Each model included removable gingiva. Splinted polymethylmethacrylate (PMMA) provisional crowns were fabricated and cemented with temporary cement. One central incisor was isolated with PTFE (0.1 mm or 0.2 mm), while the contralateral tooth was left unisolated as a control. After debonding, digital scanning and volumetric analysis using root mean square (RMS) deviation were performed to quantify retained cement. Paired t-tests were applied to compare groups. Results: The mean RMS for the PTFE group was 0.1248 ± 0.0519 mm, compared to 0.1973 ± 0.0361 mm in the non-isolated group (p < 0.001). No significant difference was found between PTFE thicknesses of 0.1 mm and 0.2 mm (p = 0.388). Conclusions: PTFE tape is effective for relative isolation when rubber dam placement is not feasible in BOPT restorations. Further clinical studies are recommended to confirm these findings in vivo. Full article

A comparative study was conducted to investigate membrane fouling control and treatment performance using natural surface water as the feed source. The evaluated processes included: (1) direct filtration–tubular ceramic membrane (DF-TCM, control); (2) coagulation–tubular ceramic membrane (C-TCM); and (3) coagulation–tubular ceramic membrane with concentrate recycling (C-TCM-CR). Experimental results demonstrated that under constant flux operation at 75 L/(m²·h) for 8 h, the C-TCM-CR process reduced the transmembrane pressure (TMP) increase by 83% and 35% compared to DF-TCM and C-TCM, respectively. Floc size distribution analysis and cake layer characterization revealed that the C-TCM-CR process enhanced coagulation efficiency and formed high-porosity cake layers on membrane surfaces, thereby mitigating fouling development. Notably, the coagulation-assisted processes demonstrated improved organic matter removal, with 13%, 10%, and 10% enhancement in COD_Mn, UV₂₅₄, and medium molecular weight organics (2000–10,000 Da) removal compared to DF-TCM, along with a moderate enhancement in fluorescent substances removal efficiency. All three processes achieved over 99% turbidity removal efficiency, as the ceramic membranes demonstrate excellent filtration performance. Full article

Honey processing is closely linked to water pollution due to the lack of a specific wastewater treatment. This study proposes a sustainable and innovative solution based on two sequential bioprocesses using a real effluent from an Argentine honey-exporting facility. In the initial stage, the honey wastewater was enriched with a non-Saccharomyces yeast (Candida ethanolica), isolated from the same effluent. Treatment with this yeast in a bioreactor nearly doubled the total sugar removal efficiency compared to the control (native flora). Subsequent clarification with diatomaceous earth reduced the optical density (91.6%) and COD (30.9%). In the second stage, secondary sewage effluent was added to the clarified effluent and inoculated with Chlorella vulgaris under different culture conditions. The best microalgae performance was observed under high light intensity and high inoculum concentration, achieving a fivefold increase in cell density, a specific growth rate of 0.752 d⁻¹, and a doubling time of 0.921 d. Although total sugar removal in this stage remained below 28%, cumulative COD removal reached 90% after nine days under both lighting conditions. This study presents the first integrated treatment approach for honey industry effluents using a native yeast–microalgae system, incorporating in situ effluent recycling and the potential for dual waste valorization. Full article

Objective: To evaluate the outcomes of a modified infratemporal fossa approach (ITFA) that preserves the posterior external auditory canal (EAC) in patients with tumors in the infratemporal fossa and skull base, focusing on postoperative hearing and facial nerve function. Methods: This retrospective study included nine patients who underwent ITFA with posterior EAC preservation for tumor removal while minimizing facial nerve rerouting. All surgeries were performed by a single surgeon. Preoperative and postoperative hearing levels, facial nerve function, tumor characteristics, and surgical outcomes were analyzed. Air-bone gaps (ABG) were assessed using pure tone audiometry, and facial nerve function was assessed using the House–Brackmann grading system. Results: The cohort consisted of eight female patients and one male patient, with a mean tumor size of 3.0 cm. Surgical outcomes were promising, with no statistically significant increase in postoperative ABG and well-preserved facial nerve function. Only one patient developed postoperative grade II facial palsy. A residual tumor was identified in one case with extensive meningioma, which has remained stable, and no recurrence or regrowth was noted during the follow-up period (mean: 3.7 years). The modified approach minimized complications related to conductive hearing loss and facial nerve dysfunction. Conclusions: The modified ITFA with posterior EAC preservation provides a promising alternative to conventional ITFA for managing deep-seated tumors. It preserves both hearing and facial nerve function while ensuring adequate tumor resection. Full article

Melamine sponges have demonstrated significant application potential in the field of adsorption materials due to their unique three-dimensional porous network structure, excellent chemical/mechanical stability, and abundant amino active sites on the surface. However, the development of modified melamine sponges with efficient Congo red dye removal capabilities remains a substantial challenge. In this study, a stable linear polymer network structure was constructed on the surface of melamine sponges via an in situ polymerization strategy based on the Schiff base reaction mechanism. Characterization analyses reveal that the modified sponge not only retained the original porous skeleton structure but also significantly enhanced the density of surface active sites. Experimental data demonstrate that the modified sponge exhibited excellent adsorption performance for Congo red dye, with the adsorption process conforming to the pseudo-second-order kinetic model and achieving a practical maximum adsorption capacity of 380.4 mg/g. Notably, the material also displayed favorable cyclic stability. This study provides an efficient adsorbent for Congo red dye-contaminated wastewater treatment through the development of a novel surface-functionalized sponge material while also offering new solutions for advancing the practical applications of melamine-based porous materials and environmental remediation technologies. Full article

Weathering steel (WS) is widely used in bridge construction due to its high corrosion resistance, durability, and low maintenance requirements. This paper reviews the performance of WS bridges in Canadian climates, focusing on the formation of protective patina, influencing factors, and long-term maintenance strategies. The protective patina, composed of stable iron oxyhydroxides, develops over time under favorable wet–dry cycles but can be disrupted by environmental aggressors such as chlorides, sulfur dioxide, and prolonged moisture exposure. Key alloying elements like Cu, Cr, Ni, and Nb enhance corrosion resistance, while design considerations—such as drainage optimization and avoidance of crevices—are critical for performance. The study highlights the vulnerability of WS bridges to microenvironments, including de-icing salt exposure, coastal humidity, and debris accumulation. Regular inspections and maintenance, such as debris removal, drainage system upkeep, and targeted cleaning, are essential to mitigate corrosion risks. Climate change exacerbates challenges, with rising temperatures, altered precipitation patterns, and ocean acidification accelerating corrosion in coastal regions. Future research directions include optimizing WS compositions with advanced alloys (e.g., rare earth elements) and integrating climate-resilient design practices. This review highlights the need for a holistic approach combining material science, proactive maintenance, and adaptive design to ensure the longevity of WS bridges in evolving environmental conditions. Full article

Direct air capture (DAC), as a complementary strategy to carbon capture and storage (CCS), offers a scalable and sustainable pathway to remove CO₂ directly from the ambient air. This study presents a detailed evaluation of the amine-functionalised metal-organic framework (MOF) sorbent, mmen-Mg₂(dobpdc), for DAC using a temperature–vacuum swing adsorption (TVSA) process. While this sorbent has demonstrated promising performance in point-source CO₂ capture, this is the first dynamic simulation-based study to rigorously assess its effectiveness for low-concentration atmospheric CO₂ removal. A transient one-dimensional TVSA model was developed in Aspen Adsorption and validated against experimental breakthrough data to ensure accuracy in capturing both the sharp and gradual adsorption kinetics. To enhance process efficiency and sustainability, this work provides a comprehensive parametric analysis of key operational factors, including air flow rate, temperature, adsorption/desorption durations, vacuum pressure, and heat exchanger temperature, on process performance, including CO₂ purity, recovery, productivity, and specific energy consumption. Under optimal conditions for this sorbent (vacuum pressure lower than 0.15 bar and feed temperature below 15 °C), the TVSA process achieved ~98% CO₂ purity, recovery over 70%, and specific energy consumption of about 3.5 MJ/KgCO₂. These findings demonstrate that mmen-Mg₂(dobpdc) can achieve performance comparable to benchmark DAC sorbents in terms of CO₂ purity and recovery, underscoring its potential for scalable DAC applications. This work advances the development of energy-efficient carbon removal technologies and highlights the value of step-shape isotherm adsorbents in supporting global carbon-neutrality goals. Full article

Aimed at developing an economical and efficient biosorbent for the adsorption and separation of rare earth ions, this study employed Spirulina dry powder biomass as a biosorbent to investigate its removal performance for Pr³⁺ in aqueous solutions. Experimental results demonstrated that under optimized conditions (pH = 5, adsorbent dosage = 2.0 g/L, initial Pr³⁺ concentration = 100 mg/L, and adsorption time = 60 min), the removal efficiency of Pr³⁺ reached 79.0%. FT-IR and XPS characterization confirmed the participation of various functional groups on the Spirulina surface in the adsorption process. When 0.1 mol/L HNO₃ was used as the desorption agent, the desorption rate of Pr³⁺ from Spirulina reached 91.7%, demonstrating excellent regeneration performance. At different temperatures (298–318 K), the adsorption data were fitted using Langmuir, Freundlich, Dubinin–Radushkevich, and Redlich–Peterson models. Among them, the Langmuir model (R² ranged from 0.993 to 0.999) provided the best fit, and the adsorption capacity of Spirulina for Pr³⁺ was in the range of 51.10 to 55.31 mg/g. Kinetic studies revealed that the pseudo-second-order model (R² = 0.999) best described the adsorption process, with a rate constant of 0.054 g/(mg·min) (R² was 0.999) at an initial Pr³⁺ concentration of 300 mg/L, indicating chemisorption-controlled behavior. Thermodynamic parameter analysis showed that within the experimental temperature range, ΔG⁰ < 0 and ΔS⁰ > 0, confirming that the adsorption process was spontaneous and endothermic. This study provides a novel technical approach for the green recovery of rare earth elements and highlights the potential of Spirulina biomass in rare earth resource recycling. Full article