Search Results (685)

Photovoltaic (PV) micro-installations producing renewable electricity and automatic pellet boilers producing renewable heat energy are promising solutions for single-family houses. A single-family house equipped with a prosumer 7.56 kWp PV micro-installation and a 26 kW pellet boiler was analyzed. This study aimed to analyze the production and use of electricity and heat over three successive years (from 1 January 2021 to 31 December 2023) and to identify opportunities for securing renewable energy supply for the house. Electricity production by the PV was, on average, 6481 kWh year⁻¹; the amount of energy fed into the grid was 4907 kWh year⁻¹; and the electricity consumption by the house was 4606 kWh year⁻¹. The electricity supply for the house was secured by drawing an average of 34.2% of energy directly from the PV and 85.2% from the grid. Based on mathematical modeling, it was determined that if the PV installation had been located to the south (azimuth 180°) in the analyzed period, the maximum average production would have been 6897 kWh. Total annual heat and electricity consumption by the house over three years amounted, on average, to 39,059 kWh year⁻¹. Heat energy accounted for a dominant proportion of 88.2%. From a year-round perspective, a properly selected small multi-energy installation can ensure energy self-sufficiency and provide renewable energy to a single-family house. Full article

The research demonstrates, through simulation and laboratory validation, the development of a low-voltage DC-link (LVDC) back-to-back converter system that enables multi-frequency power transfer. The system operates in two distinct modes, which include a three-phase grid-connected converter transferring fundamental and 5th and 7th harmonic power to a three-phase residential inverter supplying a clean 50 Hz load and another mode that uses a DC–DC buck–boost converter to integrate a battery storage unit for single-phase load supply. The system allows independent control of each harmonic component and maintains a clean sinusoidal voltage at the load side through DC-link isolation. The LVDC link functions as a frequency-selective barrier to suppress non-standard harmonic signals on the load side, effectively isolating the multi-frequency power grid from standard-frequency household loads. The proposed solution fills the gap between the multi-frequency power systems and the single-frequency loads because it allows the transfer of total multi-frequency grid power to the traditional household loads with pure fundamental frequency. Experimental results and simulation outcomes demonstrate that the system achieves high efficiency, robust harmonic isolation, and dynamic adaptability when load conditions change. Full article

The decarbonization of electricity generation by 2030 and the realization of a net-zero economy by 2050 are central to the United States’ climate strategy. However, large-scale renewable integration introduces operational challenges, including extreme ramping, unsafe dispatch, and price volatility. This review investigates how demand–response (DR) aggregators and distributed loads can support these climate goals while addressing critical operational challenges. We hypothesize that current DR aggregator frameworks fall short in the areas of distributed load operational flexibility, scalability with the number of distributed loads (prosumers), prosumer privacy preservation, DR aggregator and prosumer competition, and uncertainty management, limiting their potential to enable large-scale prosumer participation. Using a systematic review methodology, we evaluate existing DR aggregator and prosumer frameworks through the proposed FCUPS criteria—flexibility, competition, uncertainty quantification, privacy, and scalability. The main results highlight significant gaps in current frameworks: limited support for decentralized operations; inadequate privacy protections for prosumers; and insufficient capabilities for managing competition, uncertainty, and flexibility at scale. We conclude by identifying open research directions, including the need for game-theoretic and machine learning approaches that ensure privacy, scalability, and robust market participation. Addressing these gaps is essential to shape future research agendas and to enable DR aggregators to contribute meaningfully to US climate targets. Full article

To alleviate the impact of economic and environmental detriments caused by the increased demands of electric vehicle battery production and disposal, the use of spent batteries in second-life stationary applications such as energy storage for renewable sources or backup power systems, offers many benefits. This paper focuses on reducing the energy consumption cost and greenhouse gas emissions of Internet-of-Things-enabled campus microgrids by installing solar photovoltaic panels on rooftops alongside energy storage systems that leverage second-life batteries, a gas-fired campus power plant, and a wind turbine while considering the potential loads of a prosumer microgrid. A linear optimization problem is derived from the system by scheduling energy exchanges with the Ontario grid through net metering and solved by using Python 3.11. The aim of this work is to support Sustainable Development Goals, namely 7 (Affordable and Clean Energy), 11 (Sustainable Cities and Communities), 12 (Responsible Consumption and Production), and 13 (Climate Action). A comparison between a base case scenario and the results achieved with the proposed scenarios shows a significant reduction in electricity cost and greenhouse gas emissions and an increase in self-consumption rate and renewable fraction. This research work provides valuable insights and guidelines to policymakers. Full article

Traditional systems in real life lack transparency and ease of use due to their reliance on centralization and large infrastructure. Furthermore, many sectors that rely on information technology face major challenges related to data integrity, trust, and counterfeiting, limiting scalability and acceptance in the community. With the decentralization and digitization of energy transactions in smart grids, security, integrity, and fraud prevention concerns have increased. The main problem addressed in this study is the lack of a secure, tamper-resistant, and decentralized mechanism to facilitate direct consumer-to-prosumer energy transactions. Thus, this is a major challenge in the smart grid. In the blockchain, current consensus algorithms may limit the scalability of smart grids, especially when depending on popular algorithms such as Proof of Work, due to their high energy consumption, which is incompatible with the characteristics of the smart grid. Meanwhile, Proof of Stake algorithms rely on energy or cryptocurrency stake ownership, which may make the smart grid environment in blockchain technology vulnerable to control by the many owning nodes, which is incompatible with the purpose and objective of this study. This study addresses these issues by proposing and implementing a hybrid framework that combines the features of private and public blockchains across three integrated layers: user interface, application, and blockchain. A key contribution of the system is the design of a novel consensus algorithm, Proof of Energy, which selects validators based on node roles and randomized assignment, rather than computational power or stake ownership. This makes it more suitable for smart grid environments. The entire framework was developed without relying on existing decentralized platforms such as Ethereum. The system was evaluated through comprehensive experiments on performance and security. Performance results show a throughput of up to 60.86 transactions per second and an average latency of 3.40 s under a load of 10,000 transactions. Security validation confirmed resistance against digital signature forgery, invalid smart contracts, race conditions, and double-spending attacks. Despite the promising performance, several limitations remain. The current system was developed and tested on a single machine as a simulation-based study using transaction logs without integration of real smart meters or actual energy tokenization in real-time scenarios. In future work, we will focus on integrating real-time smart meters and implementing full energy tokenization to achieve a complete and autonomous smart grid platform. Overall, the proposed system significantly enhances data integrity, trust, and resistance to counterfeiting in smart grids. Full article

With the acceleration of global climate warming and agricultural modernization, the energy and carbon emission issues of agricultural parks (APs) have drawn increasing attention. An AP equipped with biogas-based combined heat and power (CHP) generation and photovoltaic systems serves as a prosumer terminal in a distribution network (DN). This paper introduces carbon emission flow (CEF) theory into the coordinated dispatch of APs and DNs. First, a CEF model for APs is established. Then, based on this model, a carbon–energy coordinated dispatch is carried out under bidirectional CEF interaction between the park and DN. A bidirectional carbon tax mechanism is adopted to explore the low-carbon synergy potential between them. Finally, the Stackelberg game approach is employed to address the pricing of electricity purchase/sale and carbon taxes in a DN, and the particle swarm optimization algorithm is used for rapid generating solutions. The case study shows that the proposed CEF model can effectively determine CEF distribution in the park. Moreover, the proposed bidirectional carbon tax mechanism significantly enhances the low-carbon economic benefits of both the AP and the DN. Full article

The increasing number of prosumers presents a significant challenge for power grid operators at low- and medium-voltage levels. This necessitates a fresh approach to the development of planning procedures and methods. In this review, we focus on four key areas regarding distribution system development planning: (1) the application of multi-criteria analysis methods, (2) the integration of distributed energy resources, (3) the impact of prosumer inverters on the design and planning of networks and protection systems, and (4) maintaining voltage levels and local power balancing under market rules. We analyzed the major contribution of the existing literature to the field and identified key trends. We also proposed future directions for scientific research in the area. Full article

Shared energy storage (SES) represents a transformative approach to advancing sustainable energy systems through improved resource utilization and renewable energy integration. In order to enhance the economic benefits of energy storage and prosumers, as well as to increase the consumption rate of renewable energy, this paper proposes a bilevel optimization model for multi-prosumer power complementarity based on SES. The upper level is the long-term energy storage capacity configuration optimization, aiming to minimize the investment and operational costs of energy storage. The lower level is the intra-day operation optimization for prosumers, which reduces electricity costs through peer-to-peer (P2P) transactions among prosumers and the coordinated dispatch of SES. Meanwhile, an improved Nash bargaining method is introduced to reasonably allocate the P2P transaction benefits among prosumers based on their contributions to the transaction process. The case study shows that the proposed model can reduce the SES configuration capacity by 46.3% and decrease the annual electricity costs of prosumers by 0.98% to 27.30% compared with traditional SES, and the renewable energy consumption rate has reached 100%. Through peak–valley electricity price arbitrage, the annual revenue of the SES operator increases by 71.1%, achieving a win–win situation for prosumers and SES. This article, by optimizing the storage configuration and trading mechanism to make energy storage more accessible to users, enhances the local consumption of renewable energy, reduces both users′ energy costs and the investment costs of energy storage, and thereby promotes a more sustainable, resilient, and equitable energy future. Full article

This paper presents SEAMS (Solar Energy Aggregator Management System), an optimization-based framework for managing solar energy trading in smart communities under Thailand’s regulatory constraints. A major challenge is the prohibition of residential grid feed-in, which limits the use of conventional peer-to-peer energy models. Additionally, fixed pricing is required to ensure simplicity and trust among users. SEAMS coordinates prosumer and consumer households, a shared battery energy storage system (BESS), and a centralized aggregator (AGG) to minimize total electricity costs while maintaining financial neutrality for the aggregator. A mixed-integer linear programming (MILP) model is developed to jointly optimize PV sizing, BESS capacity, and internal buying price, accounting for Time-of-Use (TOU) tariffs and local policy limitations. Simulation results show that a 6 kW PV system and a 70–75 kWh shared BESS offer optimal performance. A 60:40 prosumer-to-consumer ratio yields the lowest total cost, with up to 49 percent savings compared to grid-only systems. SEAMS demonstrates a scalable and policy-aligned approach to support Thailand’s transition toward decentralized solar energy adoption and improved energy affordability. Full article

The living lab methodology is widely used in innovation projects to drive user-centered development. While its benefits, such as co-creation and real-world validation, are well known, its implementation presents challenges that remain underexplored. This study examines these challenges by using the Horizon 2020 Möbius project as a case study. While the Möbius project itself aimed to modernize European book publishing through an immersive reading application and a data visualization tool, this study reflects on the implementation process of the living lab approach within that context, using an action research approach. After project completion, a structured brainstorming session reviewed identified challenges and mitigation strategies. Findings highlight three key challenges. First, misalignment between assumed and actual stakeholder needs hindered industry engagement. Second, recruitment was complicated by the ambiguous use of “prosumer”, causing confusion among participants. Third, communication gaps and personnel changes disrupted the integration of user feedback into development cycles. These challenges underscore the need for early and continuous stakeholder alignment, adaptive communication, and structured knowledge management. Based on these findings, the study proposes strategies to improve engagement and integrate user insights more effectively, ultimately enhancing the impact of living lab-based innovation projects. Full article

In the housing sector emission reduction builds on a shift from fossil fuels to renewable energy sources and increasing the efficiency of energy usage, with heating playing a dominant role in comparison to that of electricity. For electricity production in the residential sector, research shows that different settings of (co-)ownership in renewables are linked to a greater tendency to invest in energy-efficient devices or to adopt more energy-conscious behaviours. The empirical analysis demonstrates that fully-fledged prosumers, i.e., consumers who have the option to choose between self-consumption and selling to third parties or the grid, exhibit a higher tendency to invest in energy efficiency and that only this group manifests a greater likelihood of engaging in conscious-energy consumption behaviour. This paper extends the analysis to include heating in the residential sector. The study conducted an ANCOVA based on a sample of 2585 German households. The findings show that, depending on the (co-)ownership setting, the willingness to invest and to adopt energy-efficient practices grows considerably. Consumer-sellers demonstrate the highest willingness to invest and adapt energy conscious behaviour. Furthermore, regarding heating in particular, self-consumers are also inclined to invest and engage in energy-savings behaviour. Full article

This study evaluates the cost-effectiveness and environmental benefits of two residential photovoltaic (PV) on-grid systems in Poland: a 4.35 kWp system (V1) and a 5.70 kWp system (V2). With growing interest in prosumer energy and climate goals, assessing small-scale PV systems is critical for sustainable energy planning. Economic performance was analyzed using net present value (NPV), internal rate of return (IRR), and discounted payback period (DPP). Sensitivity analyses identified key factors affecting investment outcomes. V2 demonstrated superior performance, with an NPV five times higher than that of V1 and annual savings of EUR 1392 compared to EUR 270. V2 also achieved a 15.66% IRR and 7.7-year DPP, outperforming V1′s 5.85% IRR and 17.3-year DPP. CO₂ emission reductions were 2.6 and 3.6 Mg/year for V1 and V2, respectively. The findings emphasize the importance of tailored financial incentives and regulatory reforms to support prosumers and optimize grid integration in Poland. Full article

This paper aims to design and implement a decentralized multi-agent hierarchical system for energy management that can perform real-time monitoring and management of a real-world power grid with penetration of renewable energy. This approach integrates intelligent solutions based on intelligent agents to provide scalable and reliable management of smart power grids. The proposed decentralized multi-agent hierarchical system architecture allows for balancing multiple objectives, such as cost and environmental impact, in the design and operation of the energy system. The testing and tuning of this system are based on simulating real-time data flow and feedback between monitoring and control agents within a multi-agent environment modelling a smart grid. The added value of this study lies in its integrated approach to smart grid energy management, which combines real-time monitoring, decentralized control, hierarchical architecture, and consideration of both economic and environmental factors. Moreover, the use of multi-agent systems for simulation further enhances the adaptability and scalability of the system, and the focus on prosumers and the integration of renewable energy sources make it a relevant contribution to the field of sustainable energy management. While the results are promising, the current simulation framework is based on single-run experiments, limiting the statistical strength of outcome interpretations. Future research will address these aspects through expanded statistical validation, the inclusion of performance indicators, and deployment scenarios in more complex, real-world energy systems to enhance the robustness and applicability of the approach. Full article

Due to the dynamic increase in the number of prosumer electrical installations in Poland, one may observe many negative effects of their development, including the deterioration of energy quality parameters and the reliability of the existing distribution network. The installation of solar panels in Polish homes was mainly motivated by economic reasons. One of the most important problems of the distribution network is the increase in voltage. The aim of this work was to develop a practical method for determining the maximum voltage changes caused by the connection of photovoltaic installations. To accomplish this, a representative low-voltage overhead line, typical of those found in Poland, was modeled using the NEPLAN software. More than 100 distinct simulations were conducted, exploring various locations and power capacities of photovoltaic installations and utilizing authentic annual profiles for both electrical loads and photovoltaic generation. From the analysis of the data obtained, relationships that enable the determination of voltage changes induced by photovoltaic connections at any node within the low-voltage circuit were established. The computational results derived from this simplified model demonstrate sufficient accuracy for practical applications, and the required input data is accessible to distribution system operators. Full article

The Renewable Energy Community (REC) has emerged in Europe, encouraging the use of renewable energy sources (RESs) within localities, bringing social, economic, and environmental benefits. RESs are characterized by various loads, including household consumption, storage systems, and the increasing integration of electric vehicles (EVs). EVs offer opportunities for distributed RESs, such as photovoltaic (PV) systems, which can be economically advantageous for RECs whose members own EVs and charge them within the community. This article focuses on the integration of PV systems and the management of energy loads for different participants—consumers and prosumers—along with a small EV charging setup in the REC. A REC consisting of a multi-unit building is examined through a mathematical and numerical model. In the model, hourly PV generation data are obtained from the PVGIS tool, while residential load data are modeled by converting monthly electricity bills, including peak and off-peak details, into hourly profiles. Finally, EV hourly load data are obtained after converting the data of voltage and current data from the charging monitoring portal into power profiles. These data are then used in our mathematical model to evaluate energy fluxes and to calculate self-consumed, exported, and shared energy within the REC based on energy balance criteria. In the model, an energy management system (EMS) is included within the REC to analyze EV charging behavior and optimize it in order to increase self-consumption and shared energy. Following the EMS, it is also suggested that the number of EVs to be charged should be evaluated in light of energy-sharing incentives. Numerical results have been reported for different seasons, showing the possibility for the owners of EVs to charge their vehicles within the community to optimize self-consumption and shared energy. Full article