Search Results (35)

Background: Inadequate presurgical planning is a key contributor to suboptimal outcomes in orthognathic surgery. This study aims to assess the accuracy of a digital surgical planning workflow conducted prior to any orthodontic intervention. Methods: Digital planning was performed for 26 patients before orthodontic treatment (T0) and compared to the actual preoperative planning (T1). Digitized plaster casts were merged with CBCT data and converted to orthodontic setups to create a 3D virtual head model. After voxel-based registration of T0 and T1, dental arches were virtually osteotomized and repositioned according to planned outcomes. These T0 segments were then aligned with T1 planning using bony landmarks of the maxilla. Anatomical landmarks were used to construct virtual triangles on maxillary and mandibular segments, enabling assessment of positional and orientational differences. Transformations between T0 and T1 were translated into clinically meaningful metrics. Results: Significant differences were found between T0 and T1 at the dental level. T1 exhibited a greater clockwise rotation of the dental maxilla (mean: 2.85°) and a leftward translation of the mandibular dental arch (mean: 1.19 mm). In SARME cases, the bony mandible showed larger anti-clockwise roll differences. Pitch variations were also more pronounced in maxillary extraction cases, with both the dental maxilla and bony mandible demonstrating increased clockwise rotations. Conclusions: The proposed orthognathic surgical planning workflow shows potential for simulating mandibular outcomes but lacks dental-level accuracy, especially in maxillary anterior torque. While mandibular bony outcome predictions align reasonably with pretreatment planning, notable discrepancies exceed clinically acceptable thresholds. Current accuracy limits routine use; further refinement and validation in larger, homogeneous patient groups are needed to enhance clinical reliability and applicability. Full article

Background/Objectives: Anterior tooth inclination plays a critical role in treatment planning for surgical orthodontic cases. However, post-treatment outcomes in patients with jaw deformities often deviate from cephalometric values. This study aimed to compare anterior tooth inclination and skeletal morphology among patients with Class II and Class III malocclusions and to establish reference values for individualized treatment plans. Methods: A total of 122 patients (Class II: n = 40; Class III: n = 41; Class I: n = 41 as a control) were retrospectively analyzed. Cephalometric parameters, including U1 to FH and L1 to MP, were measured pre- and post-treatment. Group differences were analyzed using one-way ANOVA and Tukey’s multiple comparison test. Multiple regression analysis was used to establish prediction models for anterior tooth inclination. The threshold for statistical significance was set at p < 0.05. Results: Post-treatment, upper anterior teeth were more lingually inclined in Class II patients and more labially inclined in Class III patients compared to Class I controls (U1 to FH: Class II, 106.8°; Class III, 120.4°; Class I, 111.1°; p < 0.01). Lower anterior teeth were more lingually inclined in Class III patients compared to Class I patients (L1 to MP: 84.9°; p < 0.01). Regression models demonstrated good predictive value (R² > 0.5) in non-extraction cases. Conclusions: Regression equations developed in this study, alongside the cephalometric averages of Class I individuals, may offer reliable reference values tailored to individual craniofacial morphology, contributing to optimized treatment planning in surgical orthodontic cases. Full article

Background/Objectives: A previous study evaluating convex facial profiles at rest demonstrated that combined orthodontic and orthognathic surgical treatment is more effective in enhancing facial aesthetics compared to orthodontic camouflage alone. The present follow-up study aimed to reassess these findings by incorporating both profile and frontal facial views in the aesthetic evaluation. Methods: This retrospective cohort study sample included 36 consecutively selected patients with convex facial profiles and Class II Division 1 malocclusion. Two groups of 18 non-growing patients with similar characteristics were compared. Group A was treated with orthodontics and orthognathic surgery, whereas Group B was treated with orthodontics exclusively. Pre- and post-treatment profile and frontal facial photographs were simultaneously presented to orthodontists, oral and maxillofacial surgeons, convex profile patients, and laypeople, asking them to assess changes in facial appearance. Results: Significant positive changes in facial appearance were perceived for Group A, in contrast to no changes for Group B, with a difference of 17/100 visual analogue scale (VAS) units. The rater groups demonstrated a high degree of consistency (ICC > 0.88). Multivariate analysis revealed significant differences in perceived changes between the two treatment groups (F = 14.63, p < 0.001, Pillai’s Trace = 0.36, and partial η² = 0.36), with no significant effects from the rater group (p > 0.05). Similar results are evident when only profile photos were rated (p > 0.05). Conclusions: The combined orthodontic and orthognathic surgery approach effectively enhances facial appearance in convex profile cases, whereas orthodontic treatment alone does not result in significant changes. These findings should be clearly communicated during patient consultations and considered in treatment planning. Full article

Background/Objectives: Orthodontic camouflage is a treatment strategy designed to address mild to moderate skeletal discrepancies through dental compensation when growth modification or orthognathic surgery (OGS) is unsuitable or declined by the patient. This report highlights the treatment of a child with a skeletal Class II pattern, Class II division 1 malocclusion, a 10.8 mm overjet, traumatic overbite, and unilateral temporomandibular joint (TMJ) ankylosis on the left side. Methods: The treatment plan focused on correcting the proclination of the maxillary incisors and improving the facial profile. A non-extraction camouflage approach using pre-adjusted edgewise appliances was implemented following a gap arthroplasty procedure on the left TMJ. Results: The patient achieved a satisfactory treatment outcome, with an ideal static and functional occlusion and significant improvement in facial esthetics. The approach effectively managed the severe mandibular retrognathia and TMJ ankylosis without OGS, thereby minimizing the risk of progressive condylar resorption. Conclusions: This case underscores the importance of personalized treatment plans tailored to each patient’s dental, skeletal, and individual needs. It demonstrates that non-surgical camouflage treatments can be a viable alternative for addressing severe mandibular retrognathia with TMJ ankylosis, achieving favorable esthetic and functional outcomes. Full article

Background/Objectives: Miniscrew-assisted rapid palatal expansion (MARPE) has been increasingly used as a nonsurgical alternative for maxillary expansion in adults. However, reports of complications remain limited. This case describes a rare instance of maxillary bone fracture following MARPE and its clinical implications. Methods: A 32-year-old patient underwent MARPE as part of presurgical orthodontic treatment for maxillary constriction. Five days after activation, severe pain developed, followed by sensory disturbances in the infraorbital region. CT imaging revealed a maxillary fracture extending from the infraorbital foramen to the alveolar process. Symptoms gradually improved over two years, but psychological distress led to the abandonment of orthognathic surgery. Results: This case suggests that MARPE-induced maxillary fractures may be associated with stress concentration at the zygomatico-maxillary suture, particularly in individuals with increased midpalatal suture interdigitation and thin cortical bone. Finite element analysis and stress distribution studies indicate that the zygomatic buttress serves as a major resistance point, which may have contributed to the fracture. Conclusions: These findings highlight the importance of careful patient selection, preoperative CT assessments of bone thickness, and individualized expansion protocols. In high-risk cases, alternative approaches, such as surgically assisted expansion, may be considered. Further research on MARPE’s risk assessment and treatment protocols is needed to improve safety. Full article

Background/Objectives: Condylectomy is a delicate and intricate procedure commonly employed in the management of temporomandibular joint (TMJ) disorders, osteochondromas, condylar hyperplasia, hemimandibular hyperplasia, and other pathologies affecting the condylar region. The advent of surgical cutting guides has introduced a new dimension to condylectomy procedures as they enable surgeons to plan and execute precise cuts with a heightened level of accuracy. In the literature already exists cases of cutting guide-based condylectomy, but they only depend on the mere mirroring procedure in virtual planning, which has accuracy limitations because it does not consider asymmetry of peri-condylar structures at the level of the ramus, body, and mandibular angle. Methods: CAD-CAM orthodontic preparation through the NEMOFAB Software was performed to correct the canting of the occlusal plane, following the “orthodontic first” technique. The same software was used for VSP of the surgical cutting guide to perform the condylectomy, basing not to the mere mirroring of the opposite side but considering the whole condylar-TMJ-glenoid fossa structure. Results: At 6 months follow-up, the patient showed good occlusion and an almost totally recovered lower third symmetry as median-upper and lower interincisive lines coincide with each other and with the chin median. A good occlusal and masticatory outcome was obtained. The joint structure was preserved with remodeling of the glenoid cavity caused by the presence of the joint disc, which was preserved during surgery. Conclusions: The goal of this study is to propose a method of therapeutic management of condylar hyperplasia that benefits from accurate pre-operative orthodontic treatment (orthodontics first) to maximize the results of proportional condylectomy, reducing post-operative orthodontic care as well as any need for any adjuvant orthognathic surgery. A new virtual surgical planning method is also proposed for creating a cutting guide that not only takes advantage of the mirroring technique to accurately calculate the amount of condyle to be cut but also considers the entire condyle–TMJ complex to perform a condylectomy that is more precise. Full article

Background: The surgery-first approach (SFA) in orthognathic surgery eliminates the need for pre-surgical orthodontic treatment, significantly reducing overall treatment time. However, reliance on a compromised occlusion introduces risks of condylar displacement and remodeling. This study employs artificial intelligence (AI) and deep learning to analyze condylar behavior, comparing the outcomes of SFA to the traditional surgery-late approach (SLA). Methods: A retrospective analysis was conducted on 77 patients (18 SFA and 59 SLA) treated at Perugia Hospital between 2016 and 2022. Preoperative (T0) and 12-month postoperative (T1) cone-beam computed tomography (CBCT) scans were analyzed using the 3D Slicer software and its Dental Segmentator extension, powered by a convolutional neural network (CNN). This automated approach reduced segmentation time from 7 h to 5 min. Pre- and postoperative 3D models were compared to assess linear and rotational deviations in condylar morphology, stratified via dentoskeletal classification and surgical techniques. Results: Both the SFA and SLA achieved high surgical accuracy (<2 mm linear deviation and <2° rotational deviation). The SFA and SLA exhibited similar rates of condylar surface remodeling, with minor differences in resorption and formation across dentoskeletal classifications. Mean surface changes were 0.41 mm (SFA) and 0.36 mm (SLA, p < 0.05). Conclusions: Deep learning enables rapid, precise CBCT analysis and shows promise for the early detection of condylar changes. The SFA does not increase adverse effects on condylar morphology compared to SLA, supporting its safety and efficacy when integrated with AI technologies. Full article

Background/Objectives: The integration of AI into dentistry holds promise for improving diagnostic workflows, particularly in the detection of dental pathologies and pre-radiotherapy screening for head and neck cancer patients. This study aimed to develop and validate an AI model for detecting various dental conditions, with a focus on identifying teeth at risk prior to radiotherapy. Methods: A YOLOv8 model was trained on a dataset of 1628 annotated panoramic radiographs and externally validated on 180 radiographs from multiple centers. The model was designed to detect a variety of dental conditions, including periapical lesions, impacted teeth, root fragments, prosthetic restorations, and orthodontic devices. Results: The model showed strong performance in detecting implants, endodontic treatments, and surgical devices, with precision and recall values exceeding 0.8 for several conditions. However, performance declined during external validation, highlighting the need for improvements in generalizability. Conclusions: YOLOv8 demonstrated robust detection capabilities for several dental conditions, especially in training data. However, further refinement is needed to enhance generalizability in external datasets and improve performance for conditions like periapical lesions and bone loss. Full article

This study aimed to evaluate the differential positional changes of the proximal and distal segments during mandibular setback surgery relapse. Thirty patients with mandibular prognathism who underwent bilateral sagittal split ramus osteotomy were included. Skull models from pretreatment, postsurgery, and post-treatment cone-beam computed tomography were superimposed to evaluate condylar displacement and rotational changes, and to determine the center of rotation (C_Rot) in the proximal and distal segments. During postsurgical relapse, the proximal segment rotated 2.4 ± 2.1° counterclockwise, with the C_Rot located near the mandibular condyle. The distal segment rotated 2.0 ± 2.3° counterclockwise, resulting in forward and upward movement of the chin. The displaced condyle partially returned to its original position during postsurgical orthodontic treatment. A vertical bony step (VBS) between the proximal and distal segments commonly occurs during mandibular setback surgery. As the VBS increases, the C_Rot of the distal segment shifts posterosuperiorly, following a predictable pattern outlined by regression equations. These findings suggest that relapse after mandibular setback surgery consistently occurs in an anterosuperior direction, with translatory movement becoming more prominent as the VBS increases. Including these regression equations in presurgical planning can enhance the precision of relapse simulations and help clinicians more accurately anticipate postsurgical relapse. Full article

Deciding on the implementation or modification of steps in daily clinical care is a nuanced process that demands careful evaluation. This is crucial not only for selecting the most appropriate solution but also for achieving the best treatment outcome. Thus, implementing a workflow for treating cleft lip and/or palate patients with a presurgical orthodontic cleft-covering plate needs to consider objective factors, prioritized from most to least important: safety and quality level, user-friendliness, feasibility, and, finally, efficiency and cost. The goal of this workflow is to integrate CAD/CAM technologies into daily clinical routine to enhance technical and clinical efficiency, reduce the burden of cleft care, and simplify the implementation of these technologies in other facilities. To achieve this, a methodology based on intraoral scanning and additive manufacturing is employed to produce patient-specific passive palatal plates. The approach describes possible pitfalls and their resolution within the routine of a cleft centre, along with an exemplary case scenario. Comparative analysis between the digital workflow and the conventional process demonstrated the digital approach to be safer, higher in quality, more user-friendly, feasible, and cost- and time-effective than the conventional process. Full article

This case report presents a virtual treatment simulation of the orthodontic treatment and surgery-first orthognathic surgery employed to treat a patient with a repaired unilateral cleft lip and alveolus with Class III malocclusion and lower third facial asymmetry. The patient exhibited a negative overjet of 9 mm, a missing lower right second premolar, and a 5 mm gap between the upper right central and lateral incisors with midline discrepancy. The three-dimensional virtual planning began with virtual pre-surgical orthodontics, followed by the positioning of the facial bones and teeth in their ideal aesthetic and functional positions. The sequence of steps needed to achieve this outcome was then reverse-engineered and recorded using multiplatform Nemostudio software (Nemotec, Madrid, Spain), which facilitated both surgical and orthodontic planning. The treatment included a two-piece segmental maxillary osteotomy for dental space closure, a LeFort I maxillary advancement, and a mandibular setback with bilateral sagittal split osteotomy to correct the skeletal underbite and asymmetry. A novel approach was employed by pre-treating the patient for orthognathic surgeries at age 11, seven years prior to the surgery. This early phase of orthodontic treatment aligned the patient’s teeth and established the dental arch form. The positions of the teeth were maintained with retainers, eliminating the need for pre-surgical orthodontics later. This early phase of treatment significantly reduced the treatment time. The use of software to predict all the necessary steps for surgery and post-surgical orthodontic tooth movements made this approach possible. Multi-step virtual planning can be a powerful tool for analyzing complex craniofacial problems that require multidisciplinary care, such as cleft lip and/or palate. Full article

We present a case report of a 26-year-old female suffering from Coffin–Siris Syndrome, who underwent orthodontic treatment and surgery to solve her malocclusion and to improve her aesthetics and functional occlusion. Methods: The presurgical phase involved multibracket self-ligating attachments, namely a Damon prescription. The patient underwent maxillofacial surgery to correct the severe skeletal malocclusion and to relocate the bone bases to the right position. Post-surgical orthodontic treatment was performed to complete the alignment. Results: The patient’s aesthetics and functional abilities improved. Conclusions: Syndromic patients can undergo orthodontic treatment if comorbidities and collaboration allow it. The support and collaboration of families and psychotherapists must be considered, but clinical cases of syndromic patients can be faced and solved. Obviously, each syndromic patient is considered unique, and the risk–benefit ratio must be correctly assessed for each one. Full article

(•) Orthognathic surgery is a necessary procedure for the correction of severe skeletal discrepancies, among which are skeletal Class III malocclusions. Currently, both conventional fixed braces and clear aligners can be used in orthognathic surgery. However, the use of clear aligners remains a little-chosen option. The present study aimed to evaluate the skeletal and aesthetic improvements in adults with Class III malocclusion after surgical treatment and compare the results achieved by fixed appliances versus clear aligners. The study sample included four patients (three males and one female, aged 18 to 34 years) with skeletal Class III malocclusion, three of whom underwent a bimaxillary surgery and one of whom underwent only a bilateral sagittal split osteotomy. Two patients were treated with fixed appliances and two with clear aligners. The pre- and post-surgical hard and soft tissue cephalometric measurements were performed and compared for each patient and between fixed appliances and clear aligners. One year after surgery, all patients showed an essential modification of the face’s middle and lower third with an increase in the convexity of the profile and the Wits index and a reduction in the FH^NB angle. No differences were noted between fixed appliances and aligners. Therefore, thanks to the 3D-assisted surgery associated with orthodontics, every participant achieved proper occlusal function and an improved facial aesthetics. In addition, the clear aligners can be considered a valid alternative for pre- and post-surgical orthodontic treatment. Full article

The position and inclination of the incisors play a crucial role in achieving optimal outcomes in orthodontic and orthognathic surgical treatment, given their impact on facial aesthetics. Background/objectives: Due to numerous distorting factors that affect the reliability of the ANB angle, the aim of the present work is to evaluate a more constant parameter over time, the anterior nasal spine (ANS), and explore whether aligning the incisal margin of the upper incisors with the anterior nasal spine could be a reliable indicator for achieving appropriate labial support in pre-surgical orthodontic preparation. Methods: From a pool of 500 cone beam computed tomography (CBCT) scans, 50 CBCT examinations displaying a Class 1 skeletal pattern (ANB = 2° ± 2°) with an intermediate (3.2–4 mm) or mixed (4–6 mm) sagittal maxillary position (MX), as determined by the 3D multiplanar total face approach (TFA), were selected and compared with CBCT examinations randomly chosen from the initial pool. Moreover, 12 landmarks were identified, and measurements were automatically obtained, using software, and recorded. Mean and standard deviation values were calculated for each sample. A comparison was made between the two samples, aligning the results with the morphological analysis of the anterior nasal spine and the sagittal position of the upper maxilla. Results: In Class 1 subjects, the distance between the incisal margin and the plane passed in relation to the anterior nasal spine should range between −1 mm and 1 mm, aligned with or slightly ahead of the anterior nasal spine or slightly ahead of this limit. Conclusions: The anterior nasal spine can serve as a reliable reference point for planning the position of the upper incisors, with excessive proclination or retroclination from this reference point deemed unacceptable. Full article

Background: Maxillary hypoplasia and mandibular asymmetry may be corrected with orthognathic surgery after growth completion. For most stable results, some cases may require segmental Le Fort I osteotomies. Unfortunately, Invisalign’s software (6.0 version) still has some inherent limitations in predicting outcomes for complex surgeries. This study explores the potential of aligners, particularly in multiple-piece maxillary osteotomies in both cleft and non-cleft patients. Method: Thirteen patients who underwent pre-surgical treatment with Invisalign were retrospectively matched in terms of diagnosis, surgical procedure, and orthodontic complexity with thirteen patients treated using fixed appliances. Virtual curves following the lower arch were employed to guide the correct pre-surgical positions of the upper teeth with a simple superimposition technique. The amount of impressions required in both groups to achieve satisfactory pre-surgical alignment of the segmented arches was compared. Results: one or no refinement phases were needed in the Invisalign group to reach an acceptable pre-surgical occlusion, while the amount of pre-surgical impressions needed to reach adequate coordination with fixed appliance treatment was slightly higher (p > 0.05). Conclusions: it appears that clear aligner could serve as an effective treatment for individuals necessitating segmental Le Fort I osteotomies when aided by the suggested simple superimposition approach. Full article