Search Results (93)

Atmospheric aerosols significantly impact solar photovoltaic (PV) energy generation through their effects on surface solar radiation. This study quantifies the impact of PM_2.5 pollution on PV power output using observational data from 10 stations across Hebei Province, China (2018–2019). Our analysis reveals that elevated PM_2.5 concentrations substantially attenuate solar irradiance, resulting in PV power losses reaching up to a 48.2% reduction in PV power output during severe pollution episodes. To capture these complex aerosol–radiation–PV interactions, we developed and compared the following six machine learning models: Support Vector Regression, Random Forest, Decision Tree, K-Nearest Neighbors, AdaBoost, and Backpropagation Neural Network. The inclusion of PM_2.5 as a predictor variable systematically enhanced model performance across all algorithms. To further optimize prediction accuracy, we implemented a stacking ensemble framework that integrates multiple base learners through meta-learning. The optimal stacking configuration achieved superior performance (MAE = 0.479 MW, indicating an average prediction error of 479 kilowatts; R² = 0.967, reflecting that 96.7% of the variance in power output is explained by the model), demonstrating robust predictive capability under diverse atmospheric conditions. These findings underscore the importance of aerosol–radiation interactions in PV forecasting and provide crucial insights for grid management in pollution-affected regions. Full article

Objectives: This study assessed the effectiveness of a cognitive behavioral therapy (CBT)-based fine dust education program, grounded in the Health Belief Model (HBM), on elementary students’ fine dust knowledge, related behaviors, and mental health (depression, anxiety, stress, sleep quality). Methods: From September to November 2024, 95 students (grades 4–6) living near a coal-fired power plant in midwestern South Korea were assigned to either an intervention group (n = 44) or a control group (n = 51). The intervention group completed a three-session CBT-based education program; the control group received stress management education. Assessments were conducted at weeks 1, 2, 4, and 8 using standardized mental health and behavior scales (PHQ: Patient Health Questionnaire, GAD: Generalized Anxiety Disorder Assessment, PSS: Perceived Stress Scale, ISI: Insomnia Severity Index). Results: A chi-square test was conducted to compare pre- and post-test changes in knowledge and behavior related to PM2.5. The intervention group showed significant improvements in seven fine dust-related knowledge and behavior items (e.g., PM2.5 awareness rose from 33.3% to 75.0%; p < 0.05). The control group showed limited gains. Regarding mental health, based on a mixed-design ANCOVA, anxiety scores significantly declined over time in the intervention group, with group and interaction effects also significant (p < 0.05). Depression scores showed time effects, but group and interaction effects were not significant. No significant changes were observed for stress, sleep, or group × PM2.5 interactions. Conclusions: The CBT-based education program effectively enhanced fine dust knowledge, health behaviors, and reduced anxiety among students. It presents a promising, evidence-based strategy to promote environmental and mental health in school-aged children. Full article

This paper presents a practical framework for the design and real-time implementation of a Power Management System (PMS) for microgrids based on Supervisory Control Theory (SCT) for discrete-event systems. A detailed step-by-step methodology is provided, which covers the entire process from defining discrete events, modeling microgrid components, synthesizing supervisory controllers, and realizing them in MATLAB (R2024b) Stateflow. This methodology is applied to a case study, where a decentralized supervisor controller is designed for a microgrid containing a Battery Energy Storage System (BESS), a generator set (Genset), a wind and a solar generation system, critical loads, and noncritical loads. Unlike previous works based on SCT, the proposed PMS addresses the following functionalities: $\left(i\right)$ grid-connected and islanded operation; $\left(ii\right)$ peak shaving; $\left(iii\right)$ voltage support; $\left(iv\right)$ load shedding. Finally, a CHIL testing is employed to validate the synthesized SCT-based PMS. Full article

Surface-mounted permanent magnet synchronous generators (SPMSGs) are well suited for wind power applications mainly because of their high power density, low cogging torque, and effective thermal management. This study proposes an eccentric Halbach PM array pole shape to enhance the power generation capability of SPMSGs specifically designed for low-speed wind power generation. The topology of the proposed eccentric Halbach PM arrangement is optimized using a genetic algorithm. Two-dimensional finite element simulations indicate that the eccentric Halbach configuration significantly improves flux focusing and magnetic field distribution. Compared to the conventional design, the proposed structure exhibits a substantial increase in electromotive force with reduced total harmonic distortion. Cogging torque is reduced by 48.6%, supporting improved starting and low-speed operation. Under on-load, the proposed design delivers higher average torque with reduced ripple, contributing to smoother operation. At a rated speed, the output power increases by 25%, with consistently higher power generation capability across a wide range of load conditions. Additionally, the proposed generator achieves higher efficiency across all operating speeds. These findings confirm the effectiveness of the eccentric Halbach array configuration in improving the power generation capability of SPMSG, thereby reinforcing its applicability to low-speed wind energy systems aligned with long-term sustainability objectives. Full article

Hybrid tractors, as an efficient and environmentally friendly power system, are gradually becoming an important technical choice in the agricultural field. Compared to conventional powertrain systems, hybrid electric powertrains can achieve a 15–40% reduction in fuel consumption. By optimizing the engine operating range and incorporating electric-only driving modes, these systems further contribute to a 20–35% decline in CO₂ emissions, along with a significant mitigation of nitrogen oxides (NOx) and particulate matter (PM) emissions. In this paper, the energy management technology of hybrid tractors is reviewed, with emphasis on the energy scheduling between the internal combustion engine and electric motor, the optimization control algorithm, and its practical performance in agricultural applications. Firstly, the basic configuration and working principle of hybrid tractors are introduced, and the cooperative working mode of the internal combustion engine and electric motor is expounded. Secondly, the research progress of energy management strategies is discussed. Then, the application status and challenges of hybrid power systems in agricultural machinery are discussed, and the development trend of hybrid tractors in the fields of intelligence, low carbonization, and high efficiency in the future is prospected. This paper extracts many experiences and methods from the references over the years and provides a comprehensive evaluation. Full article

Power systems need to meet the ever-increasing demand for higher quality and reliability of electricity in distribution systems while remaining sustainable, secure, and economical. The globe is moving toward using renewable energy sources to provide electricity. An evaluation of the influence of artificial intelligence (AI) on the accomplishment of SDG7 (affordable and clean energy) is necessary in light of AI’s development and expanding impact across numerous sectors. Microgrids are gaining popularity due to their ability to facilitate distributed energy resources (DERs) and form critical client-centered integrated energy coordination. However, it is a difficult task to integrate, coordinate, and control multiple DERs while also managing the energy transition in this environment. To achieve low operational costs and high reliability, inverter control is critical in distributed generation (DG) microgrids, and the application of artificial neural networks (ANNs) is vital. In this paper, a power management strategy (PMS) based on Inverter Control and Artificial Neural Network (ICANN) technique is proposed for the control of DC–AC microgrids with PV-Wind hybrid systems. The proposed combined control strategy aims to improve power quality enhancement. ensuring access to affordable, reliable, sustainable, and modern energy for all. Additionally, a review of the rising role and application of AI in the use of renewable energy to achieve the SDGs is performed. MATLAB/SIMULINK is used for simulations in this study. The results from the measures of the inverter control, m, VL-L, and Vph_rms, reveal that the power generated from the hybrid microgrid is reliable and its performance is capable of providing power quality enhancement in microgrids through controlling the inverter side of the system. The technique produced satisfactory results and the PV/wind hybrid microgrid system revealed stability and outstanding performance. Full article

Background/Objectives: Perimesencephalic subarachnoid hemorrhage (pmSAH) is generally considered to be a benign variant of spontaneous SAH. However, in rare cases, an underlying aneurysm may be present, altering both clinical management and prognosis. The aim of this study was to evaluate the prognostic impact of aneurysmal pathology in patients presenting with perimesencephalic hemorrhage, focusing on the occurrence of complications and functional outcomes. Methods: This single-center, retrospective study included 77 patients diagnosed with perimesencephalic hemorrhage between 2012 and 2022. Clinical and radiological data were extracted, including demographics, risk factors, complications (hydrocephalus, vasospasm, and delayed cerebral ischemia (DCI)), and outcome scores (Glasgow Outcome Scale (GOS) and modified Rankin scale (mRS) at discharge). Patients were divided into two groups based on the presence or absence of an aneurysm confirmed through digital subtraction angiography (DSA). Results: Of the 77 patients, 7 (9.1%) were found to have an aneurysm. While rates of complications such as hydrocephalus and DCI were higher in the aneurysm group, these differences did not reach statistical significance. However, patients with aneurysms had significantly worse functional outcomes, with higher mRS and lower GOS scores at discharge. Logistic regression confirmed the presence of aneurysms as an independent factor associated with poor outcomes (OR = 21.6; 95% CI: 1.00−467.3; p = 0.050), while other variables such as age, sex, and World Federation of Neurosurgical Societies (WFNS) score were not statistically significant. ROC analysis showed moderate discriminative power of aneurysm presence for poor outcomes (AUC = 0.72). Conclusions: The presence of an aneurysm, although rare in pmSAH, significantly worsens functional outcomes. These findings highlight the necessity of early and sensitive vascular diagnostics—particularly DSA—to reliably exclude aneurysms. Differentiating between aneurysmal and non-aneurysmal perimesencephalic bleeding is essential not only for clinical decision-making but also for optimizing resource allocation in neurocritical care. Full article

This paper presents a highly linear two-stage InGaP/GaAs power amplifier integrated circuit (PAIC) using a dynamic predistorter for 5G small-cell applications. The proposed predistorter, based on a diode-connected transistor, utilizes a supply voltage to accurately control the linearization characteristics by adjusting its dc current. It is connected in parallel with an inter-stage of the two-stage PAIC through a series configuration of a resistor and an inductor, and features a shunt capacitor at the base of the transistor. These passive components have been optimized to enhance the linearization performance by managing the RF signal’s coupling to the diode. Using these optimized components, the AM−AM and AM−PM nonlinearities arising from the nonlinear resistance and capacitance in the diode can be effectively used to significantly flatten the AM−AM and AM−PM characteristics of the PAIC. The proposed predistorter was applied to the 2.6 GHz two-stage InGaP/GaAs HBT PAIC. The IC was tested using a 5 × 5 mm² module package based on a four-layer laminate. The load network was implemented off-chip on the laminate. By employing a continuous-wave (CW) signal, the AM−AM and AM−PM characteristics at 2.55–2.65 GHz were improved by approximately 0.05 dB and 3°, respectively. When utilizing the new radio (NR) signal, based on OFDM cyclic prefix (CP) with a signal bandwidth of 100 MHz and a peak-to-average power ratio (PAPR) of 9.7 dB, the power-added efficiency (PAE) reached at least 11.8%, and the average output power was no less than 24 dBm, achieving an adjacent channel leakage power ratio (ACLR) of −40.0 dBc. Full article

Air Quality (AQ) and the management of low-emission zones are critical issues in densely populated urban areas. In such environments, human activity significantly impacts AQ, prompting increased efforts to monitor it using a range of devices. Traditional Air Quality monitoring relies on regulated stations, which are often scarce due to high costs, leaving many areas unmonitored. Low-cost sensors offer a promising solution by enabling the higher-spatial-resolution monitoring of pollution levels. In this article, we present the results of a case study conducted in an urban setting where AQ is affected by human activity, particularly during Las Fallas, Valencia’s most renowned festival, which has been declared an Intangible Cultural Heritage of Humanity by UNESCO. The festival features widespread bonfires, firecrackers and large crowds, all of which contribute to worsening air pollution. In this context, we evaluate the performance of the off-the-shelf, low-cost ZPHS01B multisensor module in a real deployment. This module is capable of monitoring Temperature (T), Relative Humidity (RH), Particulate Matter (PM), CO, ${\mathrm{CO}}_2$, ${\mathrm{NO}}_2$, ${\mathrm{O}}_3$, ${\mathrm{CH}}_2$O and Volatile Organic Compounds. We analyze the features and properties of these sensors. In our deployments, the ZPHS01B module is connected to an ESP32 microcontroller and assembled into an AQ Internet of Things (IoT) node. We present AQ monitoring results from the festival and compare the measurements with those from regulated AQ monitoring stations, used as a reference. Additionally, we evaluate the power consumption of this AQ IoT node, providing its electrical operating characteristics and considering the use of duty cycles to reduce consumption while maintaining sensor stability. We conclude that this module offers promising capabilities for identifying pollution risk zones and opens the door to new research opportunities, particularly in efficient sensor calibration and AQ parameter prediction. Full article

During the waiting period before passing through locks, inland vessels typically rely on diesel generators to power their onboard equipment, which leads to air pollution and poses more direct threats to the surrounding residents and ecological environment. To assess the extent to which green and efficient lock passage strategies can reduce air pollution, this study takes the Linked Control Policy for Vessels Passing Through Locks released by the Three Gorges Navigation Authority in China in December 2017 as the research object. It collected air quality monitoring data for six years before and after the policy implementation (2014–2020) and used a Regression Discontinuity model (RD model) to analyze the policy’s effect. The results show that compared to 2014, the average concentration of SO₂ in the air decreased by 67% in 2020, along with NO₂ decreasing by 32%, PM_2.5 by 42%, PM₁₀ by 46%, and the AQI (Air Quality Index) by 27%. The robustness test of the RD model also confirmed the causal relationship between the policy implementation and the improvement in air quality. This research is the first to systematically disclose the environmental benefits of the “soft” management policy of optimizing the lock passage process, uncovering the positive influence of active ship lock passage policy on air quality, and providing a scientific basis for promoting the implementation of policies related to lock management. Full article

The goal of this study is to describe a design architecture for a self-powered IoT (Internet of Things) sensor network that is currently being deployed at various locations throughout the Dallas-Fort Worth metroplex to measure and report on Particulate Matter (PM) concentrations. This system leverages diverse low-cost PM sensors, enhanced by machine learning for sensor calibration, with LoRaWAN connectivity for long-range data transmission. Sensors are GPS-enabled, allowing precise geospatial mapping of collected data, which can be integrated with urban air quality forecasting models and operational forecasting systems. To achieve energy self-sufficiency, the system uses a small-scale solar-powered solution, allowing it to operate independently from the grid, making it both cost-effective and suitable for remote locations. This novel approach leverages multiple operational modes based on power availability to optimize energy efficiency and prevent downtime. By dynamically adjusting system behavior according to power conditions, it ensures continuous operation while conserving energy during periods of reduced supply. This innovative strategy significantly enhances performance and resource management, improving system reliability and sustainability. This IoT network provides localized real-time air quality data, which has significant public health benefits, especially for vulnerable populations in densely populated urban environments. The project demonstrates the synergy between IoT sensor data, machine learning-enhanced calibration, and forecasting methods, contributing to scientific understanding of microenvironments, human exposure, and public health impacts of urban air quality. In addition, this study emphasizes open source design principles, promoting transparency, data quality, and reproducibility by exploring cost-effective sensor calibration techniques and adhering to open data standards. The next iteration of the sensors will include edge processing for short-term air quality forecasts. This work underscores the transformative role of low-cost sensor networks in urban air quality monitoring, advancing equitable policy development and empowering communities to address pollution challenges. Full article

This study applied various machine learning techniques, including shrinkage methods, XGBoost, CSR, and random forest, to forecast ultrafine particulate matter (PM2.5) concentrations in Seoul, South Korea. The analysis incorporated key variables known to significantly influence PM2.5 levels, including meteorological data, coal-fired power generation, and PM2.5 concentrations in Dalian, China. Using daily data from 1 January 2018 to 30 June 2023, this study employed the Boruta algorithm, a variable selection technique based on the random forest model, to identify the most influential predictors for predicting PM2.5 concentrations. Out-of-sample multi-period forecasts were evaluated for each model using the RMSE, MAE, and Giacomini–White test to determine the most effective forecasting approach. It was found that the random forest model with the Boruta algorithm outperformed all other models, achieving improvements of 4% to 17% in the RMSE and 4% to 16.5% in the MAE across all forecast horizons. The results indicate that the random forest model and its variant incorporating the Boruta algorithm provided superior short-term forecasting performance. In particular, the Boruta algorithm highlighted the lagged variables of temperature, PM2.5 concentration, mean humidity, and Dalian PM2.5 concentration as critical factors for the accurate prediction of PM2.5 levels in Seoul. These findings underscore the utility of data-driven approaches to improve air quality forecasting and management. Full article

With the widespread integration of renewable energy into distribution networks, energy storage systems are playing an increasingly critical role in maintaining grid stability and sustainability. Hydrogen, as a key zero-carbon energy carrier, offers unique advantages in the transition to low-carbon energy systems. To facilitate the coordination between hydrogen and renewables, this paper proposes a flexible on-grid and off-grid control method for an electric–hydrogen hybrid AC-DC microgrid which integrates photovoltaic panels, battery energy storage, electrolysers, a hydrogen storage tank, and fuel cells. The flexible control method proposed here employs a hierarchical structure. The upper level adopts a power management strategy (PMS) that allocates power to each component based on the states of energy storage. The lower level utilises the master–slave control where master and slave converters are regulated by virtual synchronous generator (VSG) and active and reactive power (PQ) control, respectively. In addition, a pre-synchronisation control strategy which does not rely on traditional phase-locked loops is introduced to enable a smooth transition from the off-grid to on-grid mode. The electric–hydrogen microgrid along with the proposed control method is modelled and tested under various operating modes and scenarios. The simulation results demonstrate that the proposed control method achieves an effective power dispatch within microgrid and maintains microgrid stability in on- and off-grid modes as well as in the transition between the two modes. Full article

The paper analyzes the processes of emission and dispersion of particulate contaminants from a large point source emitter: a hard coal-fired power plant. Reference is made to the European Green Deal and its main objective of reducing anthropogenic particulate and greenhouse gas emissions. CHPP, Krakow Combined Heat and Power Plant, Poland, as described in the article, has a strong impact on the mechanisms that shape the microclimatic factors of the Krakow agglomeration. This combined heat and power plant provides heat and electricity for the city, while simultaneously emitting significant amounts of suspended particulate matter into the atmosphere. Due to the adverse impact of non-conventional energy sources on the natural environment and the increasing effects of climate warming, radical changes need to be implemented. The HYSPLIT (Hybrid Single-Particles Lagrangian Integrated Trajectories) model was used to track the movement of contaminated air masses. A 5-day episode of increased hourly concentrations of PM2.5 particulate matter contamination was selected to analyze the backward trajectories of air mass displacement. From 15 August 2022 to 19 August 2022, high 24-h particulate matter concentrations were recorded, measuring around 20 µg/m³. The HYSPLIT model, a unique tool in the precise identification of point sources of pollution and their impact on the air quality of the region, was used to analyze the influx of polluted air masses. A 5-day episode of increased hourly concentrations of PM2.5 pollutants was selected for the study, with values of approximately 20 µg/m³. It was found that low-pressure systems over the North Atlantic brought wet and variable weather conditions, while high-pressure systems in southern and eastern Europe, including Poland, provided stable and dry weather conditions. The simulation results were verified by analyzing synoptic maps of the study area. The image of the displacement of contaminated air masses obtained from the HYSPLIT model was found to be consistent with the synoptic maps, confirming the accuracy of the applied model. This means that the HYSPLIT model can be used to create maps of contaminant dispersion directions. Consequently, it was confirmed that modeling using the HYSPLIT model is an effective method for predicting the displacement directions of particulate contamination originating from coal combustion in a combined heat and power plant. Identifying circulation patterns and front zones during episodes of increased contaminant concentrations is strategic for effective weather monitoring, air quality management, and alerting the public to episodes of increased health risk in a large agglomeration. Full article

The increasing emphasis on environmental sustainability and stricter gas emissions regulations has made the optimization of fuel and emissions a crucial factor for marine propulsion systems. This paper investigates the potential to improve fuel efficiency and reduce emissions of LNG ship propulsion systems by using different load sharing strategies in Dual-Fuel Diesel-Electric (DFDE) propulsion systems. Using data collected from on-board cyclic measurements and an optimization model, the effects of different load sharing strategies for various types of fuel, such as HFO, MDO, and LNG, under different engine load conditions were investigated. The results of these strategies are compared with those of on-board power management systems (PMS), which evenly allocate power among the engines, irrespective of fuel usage and emission levels. The results show that load adjustments according to the optimization model can considerably increase fuel economy and contribute to the reduction of CO₂ and NO_x compared to standard practice at the equal load in different ship operating modes. Our approach introduces an innovative optimization concept that has been proven to improve fuel efficiency and reduce emissions beyond standard practices. This paper demonstrates the robustness of the model in balancing environmental and operational objectives and presents an effective approach for more sustainable and efficient ship operations. The results are in line with global sustainability efforts and provide valuable insights for future innovations in energy optimization and ship emission control. Full article