Search Results (349)

In the environment, the coexistence of microplastics (MPs) with other pollutants may either enhance or reduce the toxicity of MPs themselves or the co-occurring pollutants toward microalgae. This phenomenon is particularly notable when MPs interact with emerging pollutants, such as ultraviolet absorbers. This study investigates the single and combined exposure effects of ultraviolet absorber (Butyl methoxydibenzoylmethane, BMDM, 50 μg/L) and MPs (Polystyrene, PS, 10 mg/L, d = 1 μm) on Chlorella sp. with a stress duration of 7 days. The results showed that cell density, chlorophyll a (Chla) concentration, and physical properties of cell surface integrity were higher in the combined stress group compared to the BMDM single stress group. Furthermore, transcriptome sequencing analysis revealed that the number of differentially expressed genes (DEGs) in the combined exposure group (885 DEGs) was lower than in the single exposure groups (BMDM: 1870 DEGs and PS: 9109 DEGs). Transcriptomic profiling indicated that individual stressors of BMDM and PS disrupted 113 and 123 pathways, respectively, predominantly associated with protein synthesis and energy metabolism. Conversely, combined exposure significantly enriched 86 pathways, including ribosome function and oxidative phosphorylation, thereby manifesting an antagonistic effect. This study provides new insights into the effects of BMDM and PS on Chlorella sp. and offers valuable information for the risk assessment of multiple pollutants. Full article

Polystyrene microplastics (PS-MPs) are microplastic particles produced during plastic manufacturing and environmental degradation, accumulating over time and entering ecosystems through various pathways, ultimately affecting organisms and inducing toxic effects. Current research on the impact of PS-MPs on mammalian oocyte quality, along with potential preventive mechanisms and strategies to mitigate toxicity, remains limited. This study investigates the effects of antioxidant melatonin on oocyte quality in the presence of PS-MPs, focusing on their influence on oocyte meiotic maturation and embryonic developmental potential. PS-MPs at a concentration of 30 μg/mL significantly impaired first polar body extrusion and reduced the success rate of parthenogenetic activation of mature oocytes in vitro. Furthermore, exposure to PS-MPs exacerbated oxidative stress, mitochondrial dysfunction, apoptosis, and autophagy impairment. Additionally, PS-MPs exposure led to a reduction in antioxidant gene expression and an increase in apoptosis-related gene expression in porcine oocytes. Immunofluorescence assays revealed that PS-MPs may induce oxidative stress, mitochondrial damage, and inflammation through the NF-KB/Nrf2/JNK MAPK signaling pathway crosstalk. Further investigation demonstrated that melatonin supplementation alleviated the toxic effects of PS-MPs exposure, offering potential as a therapeutic approach for mitigating PS-MP-induced reproductive toxicity and preserving oocyte quality. Full article

Plastic pollution represents a significant emerging environmental problem. Micro-sized particles of synthetic polymers—microplastics (MPs)—have been identified in all parts of marine ecosystems. In the marine environment, organisms are exposed to MPs, which undergo a constant process of physicochemical and biological degradation. Utilization of UV irradiation as the optimal exposure factor in the simulation of fundamental natural conditions is a widely accepted approach. This enables the study of the harmful effects of such particles when interacting with aquatic organisms. This study aimed to investigate the effect of pristine and photoaging primary polystyrene microspheres (µPS) at three concentrations on the viability and DNA integrity of the sperm of the sand dollars Scaphechinus mirabilis. The results of the investigation demonstrated that IR spectroscopy revealed structural changes in polystyrene, confirming the oxidative degradation of the polymer under UV irradiation. The study demonstrated that artificially aged µPS exhibited a more pronounced effect than pristine particles, as evidenced by reduced sperm viability and increased DNA damage. Thus, the resazurin test showed that after exposure to UV-irradiated µPS, sperm viability decreased to 83–85% at concentrations of 10 and 100 particles and to 70% at a concentration of 1000. In addition, the Comet assay showed that the particles increased the percentage of DNA in the tail from 20% to 30% in a dose-dependent manner. The findings substantiate and augment the existing body of experimental data of the toxicity of aged plastic fragments, thereby underscoring the need for further study into the toxicity of aged MPs on marine invertebrates. Full article

Polystyrene Microplastics (PS-MPs) affect testicular activity, as evidenced by increased oxidative stress, apoptosis, and autophagy activation, impairing steroidogenesis and spermatogenesis. The present study investigates, for the first time in vivo, the potential protective effect of D-aspartate (D-Asp) against PS-MPs-induced damage on the testicular function of adult rats. D-Asp, well-known stimulator of testosterone biosynthesis and spermatogenesis progression, possesses pharmacological properties, including antioxidant and anti-apoptotic ones. The results showed that PS-MP’s adverse effects on testicular activity were reversed by D-Asp treatment. Mechanistically, D-Asp inhibited testicular oxidative stress by modulating the protein levels of CAT, SOD1, SOD2, and 4-HNE; affecting TBARS levels; and reducing apoptosis, as suggested by CYT C analysis and a TUNEL assay. Furthermore, D-Asp administration mitigated PS-MPs-induced autophagy activation by modulating the expression of LC3BI, LC3BII, and p62 proteins. Finally, the amino acid counteracts PS-MPs damage on steroidogenesis and spermatogenesis by restoring normal levels of steroidogenic (StAR, 3β-HSD, and 17β-HSD) and spermatogenic (PCNA and SYCP3) markers. This study encourages further research to understand the potential value of the amino acid in improving human testicular health and male fertility. Full article

Microplastic (MP) pollution in urban areas is a growing global concern due to its health risks and environmental effects. This study investigates the sources, spatial distribution, and health risks of MPs in road dust across industrial, capital city, and peri-urban areas of Bangladesh. Street dust samples were collected from 15 heavily congested traffic sites across Dhaka and its surrounding areas. The samples were analyzed using fluorescence microscopy and Fourier Transform Infrared (FTIR) spectroscopy to identify MP types and their morphological characteristics. We have identified six types of polymers, including Polyvinyl alcohol (PVA), Polyethylene (PE), Polypropylene (PP), Polystyrene (PS), Low-Density Polyethylene (LDPE) and High-Density Polyethylene (HDPE), with industrial areas exhibiting the highest levels of MPs followed by capital city and peri-urban zones. PP was the most prevalent MP polymer, with the highest level in industrial areas (14.1 ± 1.7 MPs/g), followed by capital city (9.6 ± 1.92 MPs/g) and peri-urban areas (7.2 ± 1.56 MPs/g). Principal Component Analysis (PCA) identified traffic emissions, industrial activities, and mismanaged plastic waste as the primary sources of MPs. Health risk evaluations indicated that children are more susceptible to MP exposure through ingestion and inhalation, with industrial areas posing the highest carcinogenic risk. The findings underscore the pressing demand for better waste management systems and stricter regulatory measures to mitigate MP pollution and safeguard public health in urban environments. Addressing these challenges is essential to reduce the growing threat of MPs and their long-term effects on ecosystems and human well-being. Full article

This study aimed to assess the presence of microplastics (MPs) in an urban river (Gari, Lazio, Italy) using case-building caddisfly larvae as potential bioindicators. Results from the benthic faunal assemblage (STAR_ICMi = 0.797) revealed the presence of a rich and well-diversified macroinvertebrate community, thus reflecting a suitable ecological status. Of 279 caddisfly cases collected, 26% contained small plastic particles of various shapes and colours, while 542 MP items per m² were found in their substrate. Polyvinyl chloride (PVC) and Polyethylene terephthalate (PET) were the most abundant polymers identified by FT-IR analysis found in the Gari River, while the co-presence of lower-density polymers such as polystyrene (PS) and polyethylene (PE) or polypropylene (PP) reflects the contribution of multiple factors controlling MP deposition. The most abundant MPs were of secondary origin, as evidenced by the Carbonyl Index and the predominant shape. Despite the amounts of MPs found in the Gari River, their ecological and chemical status has been classified as “good” during the monitoring campaigns. These results highlight the need to further investigate the environmental impacts of MPs to implement water quality classification indices. Full article

The dynamic behavior and biologically mediated transformation of microplastics (MPs) in crustaceans remain insufficiently explored in aquatic ecotoxicology. In this study, we employed the red swamp crayfish (Procambarus clarkii) as a model organism to systematically investigate the accumulation, distribution, fragmentation, and excretion kinetics of MPs within its digestive system under controlled conditions. We exposed crayfish to fluorescent polystyrene microplastics (50 μm) at a high concentration (100,000 particles/L), which exceeded typical environmental levels but was necessary to track accumulation and fragmentation dynamics within the experimental timeframe, and dissections were performed at 24, 48, and 96 h. Spatiotemporal patterns and morphological changes in MPs were analyzed using advanced microscopic imaging techniques. The results revealed a peak in MP accumulation at 48 h, followed by a decrease at 96 h, suggesting a dynamic equilibrium between ingestion and elimination. Over time, particle sizes decreased significantly, a result consistent with microplastic fragmentation. Additionally, feed supplementation during depuration was associated with increased fragmentation efficiency. Morphological analysis showed digestion-induced changes such as surface wrinkling, irregular edges, and particle shrinkage. These findings elucidate the transformation mechanisms of microplastics within crustaceans and provide crucial insights for assessing their potential ecological risks and fate as pollutants. Based on results from high-concentration short-term laboratory exposure studies, this paper further indicates the necessity for in-depth exploration into the long-term dynamics of microplastics within aquatic organisms and the potential for their transfer across trophic levels. Full article

Microplastics (MPs) are widespread contaminants in seabeds, where they are bioavailable to benthic organisms including polychaetes. Among them, the bearded fireworm represents a potential target for MP, given its opportunistic predatory and scavenging habits, reaching high densities and displaying a wide expansion range in the Mediterranean Sea. In this pilot bench-scale study, we investigated MP ingestion and egestion in this species through a simplified two-level trophic chain, using mussels as prey. Mediterranean mussels were first exposed to fluorescently labelled polystyrene microspheres (micro-PS, nominal size of 10 µm) and offered to fireworms. Within three days, fireworm faecal pellets, intestines, and body fluids were collected and digested to quantify MP. In-depth microscopy analyses were carried out to evaluate potential chemical and physical alterations of MPs during gut passage. Minimal retention of MPs in fireworm tissues was observed, while faecal pellets contained substantial quantities of micro-PS. Despite most MPs exhibiting negligible chemical changes, they were covered by faecal matter and colonised by bacteria, with minor surface alterations. Our findings provide the first evidence of MP trophic transfer from a filter feeder to a carnivorous polychaete. The rapid excretion of MPs by bearded fireworms gives insights into polychaete-mediated MP fluxes and MP fate in benthic ecosystems. Full article

Biodegradable plastics are not a primary solution to plastic pollution, and empirical evidence on whether they are environmentally friendly remains lacking. In this study, we systematically compared the toxic effects of traditional microplastics (polypropylene, PP; polystyrene, PS) with biodegradable microplastics (polylactic acid, PLA; polyhydroxyalkanoates, PHA) on the haplic phaeozem ecosystem. Through mathematical modeling analysis, it was found that earthworms initially rely on antioxidant enzymes to resist stress, mid-term activation of detoxifying enzymes to repair damage, and maintaining physiological balance through metabolic regulation and immune enhancement in later stages. We elucidated their mechanism differences: PLA and PP caused severe damage to the antioxidant system and cell membrane, with PLA mainly relying on POD to clear peroxides and PP relying on GST. In addition, PLA and PS can induce early neurotoxicity (AChE), while PHA induces late neurotoxicity. Furthermore, this study provides direct evidence proving that biodegradable microplastics are not environmentally friendly by breaking through the one-way research framework of “microplastic biotoxicity” and innovatively constructing a path analysis model that links biological physiological responses with soil ecological functions. We also provide a scientific basis to evaluate the ecological risks of microplastic pollution in soil and the whether biodegradable plastics are truly environmentally friendly. Full article

Microplastics (MPs) represent a persistent class of emerging contaminants, of which significant amounts can be found in sewage sludge. In this study, the effect of hydrothermal carbonization (HTC) temperature on MPs and the properties of digested sewage sludge (DSS) was evaluated. The HTC process was carried out at temperatures of 200, 210, and 220 °C for 2 h in a batch reactor, and the solid products were subjected to (i) mass balance and fuel properties and (ii) microplastic occurrence analysis using Confocal Raman Microspectroscopy and Scanning Electron Microscopy. In digested sludge, 2700 ± 475 MP particles/100 g d.m. were detected, mostly fragments with ~350 ± 100 fibers. Hydrocharcontained only black and brown fragments in the following amounts: 4175 ± 575 (200 °C), 4450 ± 700 (210 °C), and 1450 ± 590 (220 °C), respectively, after 2 h. The microplastic removal rate was 54% for the highest temperature. Polystyrene (PS) was identified in untreated sludge, while only PE was detected after HTC at 200–210 °C, and no MPs were identifiable at 220 °C. The surfaces of post-MPs exhibited progressive degradation with increasing HTC temperature. The results confirm that HTC lowers the content and alters the physicochemical properties of microplastics, reducing their thermal stability and degrading their structure, while simultaneously improving the fuel properties of hydrochars by increasing the calorific value and carbon content. Full article

Microplastics have become a significant concern for human health, primarily because aquatic animals can ingest these particles, which then enter the human food chain. Crabs (Portunus pelagicus) were collected along the coastline of Rayong Province in January, April, and August 2024. Crabs were then examined for MP contamination. Our results revealed that MPs were present at all sampling sites, with a detection rate of 62.5% in external body parts and 72.2% in internal body parts. The gut was the most contaminated tissue, followed by the gills, while no MPs were found in the hepatopancreas or muscle tissues. Although overall MP detection and contamination levels were similar across sites, significant differences in abundance were observed between seasons (p < 0.05), with August showing the highest contamination levels. Polyethylene terephthalate glycol was the most common polymer detected, followed by nylon, polypropylene, polyethylene, polystyrene, and polyester. Anthropogenic and fishing activities contribute significantly to MP pollution in these crabs. Fibers from household laundry, followed by damaged fishing gear, are major sources of MP pollution. Enhancing the quality and durability of fishing equipment is crucial to reducing the amount of abandoned fishing gear that may be ingested by marine organisms, while the proper collection and management of discarded gear in the ocean should also be emphasized. Full article

Polystyrene microplastic (PS-MP) particles disrupt aquatic biological systems due to their persistence and high bioaccumulation potential, causing structural damage and inflammatory responses. PS-MPs also act as metabolic disruptors, affecting glucose metabolism and insulin signaling, although the mechanisms underlying these effects remain unclear. In this study, grass carp were exposed to 100 μg/L and 400 μg/L of polystyrene MPs for 30 days. Histopathological analysis showed the shortening of intestinal villi, vacuolization, and inflammatory infiltration. Antioxidant enzyme activities (SOD and CAT) were reduced, while the presence of tissue damage markers (GPT and GOT) was elevated, suggesting a biphasic oxidative stress response. Transcriptomic analysis revealed downregulation of genes related to metabolism and insulin signaling, especially at 400 μg/L. Gene set enrichment analysis (GSEA) highlighted pathways related to insulin resistance and type 2 diabetes, indicating the disruption of glucose metabolism. Microbiome analysis showed reduced diversity, expansion of Proteobacteria (opportunistic pathogens), and a decrease in beneficial bacteria like Bacillus. These shifts correlated with changes in the expression of key insulin signaling genes, emphasizing the role of host–microbiota interactions in metabolic imbalances. This study revealed that PS-MPs disrupt glucose metabolism and insulin signaling in grass carp through a combination of histological damage, oxidative stress, and microbiota dysbiosis. Full article

The present study investigates the role of microplastics (MPs) (polystyrene (PS) microbeads) in copper (Cu) binding within the sea surface microlayer (SML) and underlying water (ULW). A mesocosm experiment was conducted, with both SML and ULW samples obtained daily, comparing mesocosms containing MPs with those free of them. The SML enrichment in dissolved Cu (Cu-D) and the Cu-complexing capacity (L_T) were found to be significantly higher in the MP-treated mesocosms, with stability values of Cu-ligand complexes (logK′) being higher in the SML of MP treatments. Significant differences in Cu-D and L_T between control and MP treatments were found in SML and ULW across treatments and over time. Cu-D was negatively correlated with transparent exopolymer particles (TEPs) in the ULW of both treatments, while L_T was positively correlated with TEPs in the SML of MP treatments. Experimental data indicate that the co-existence of TEPs and MPs favors Cu binding with organic matter in the SML, suggesting that MPs may enhance this process. The impact of MPs on dissolved Cu complexation is probably attributed to the production of organic ligands, via enhanced TEP production, without excluding direct adsorption onto biofilm-coated MPs. The present study provides insight into the role of microplastics in Cu cycling in marine surface waters, focusing on the microenvironment of the SML. Full article

Freshwater pollution is a global issue that can impact aquatic organisms in multiple ways. One of the many detrimental consequences of freshwater pollution is the disruption of the intestinal microbiome in aquatic animals. This review addresses the impact of various chemical entities like pesticides, heavy metals, antibiotics, dyes, and microplastic. Gut microbiota serves as a crucial regulator of metabolic processes across all organisms. Since numerous metabolic pathways are coordinated by microbial communities, even minor disruptions can lead to consequences ranging from mild to severe. The widespread use of chemicals in modern life has made them a primary focus of current gut microbiota research. Zebrafish (Danio rerio) can serve as a model organism to investigate gut microbiome responses to exposure to hazardous contaminants. In this review we include research studying pesticides (methomyl, λ-cyhalothrin, cyproconazole, dieldrin, penthiopyrad, acetochlor, metamifop, imidacloprid, difenoconazole, imazalil, cypermethrin), heavy metals (lead, cadmium, arsenic, chromium, copper, and various nanoparticles), antibiotics (oxytetracycline, florfenicol, doxycycline, trimethoprim, erythromycin, streptomycin, tetracycline, sulfamethoxazole, and clarithromycin), and microplastics (polystyrene, polyethylene, polyester, polypropylene). This review study provides a description of microbiome alterations due to single and combined short- and long-term exposure to the aforementioned contaminants in zebrafish and larvae microbiomes. Full article

The characteristics of polystyrene (PS) microplastic (MP) microfiltration by a cellulose acetate (CA) membrane were investigated within this study. Particle sizes and pore sizes were selected in a comparable range in order to challenge the dead-end microfiltration. Backwashing experiments round up the investigations. Microfiltration characteristics and particle size measurements, as well as a particle fouling analysis by different methods, were applied in the study in order to provide a comprehensive picture of particle deposition and particle fouling structuring. The particle removal efficiency was particle-size-dependent, and especially small particles were further reduced during the proceeding filtration, while the larger particles were already removed within the first minutes of filtration. This observation was attributed to the pore blocking (internal and/or complete) and build-up of the filter cake. The difference in the particle-fouling structure at low and elevated filtration pressure significantly influences the backwashing efficiency. The particle fouling resulting from low-pressure filtration was completely removed due to the backwashing procedure applied, while an increased filtration pressure resulted in a different particle-fouling structure, which negatively influenced the backwashing efficiency. This knowledge of the formation and structure of the MP particle fouling and its removal by backwashing is a prerequisite for further process development. Full article