Search Results (30)

Hydrogel-based sensors have emerged as transformative soft-sensing platforms, featuring tissue-matched compliance, high water content, stimuli responsiveness, and chemical tunability, properties which are unachievable with conventional rigid sensors. Despite substantial advances, the existing reviews focus on individual polymer categories, discrete transduction mechanisms, or targeted standalone applications, failing to establish an integrated pipeline from material design to final sensing performance. This review fills these crucial gaps by systematically correlating polymer chemistry, crosslinking tactics, and fabrication protocols with the selection of transduction mechanisms and resultant sensing performance across biomedical and environmental fields. We conduct a critical assessment of natural and synthetic polymers together with chemical, physical, and hybrid composite crosslinking methodologies. Multiple sensing modalities, including piezoresistive, capacitive, thermogalvanic, electrochemical, colorimetric, ratiometric fluorescence, and piezoionic sensing are elaborated alongside representative quantitative performance parameters. Emerging platforms, including self-powered thermogalvanic sensors, SERS-integrated biosensors, and MXene/MOF composites, are highlighted as underexplored frontiers. In addition, persistent bottlenecks including dehydration-derived signal drift, inferior long-term operational stability, unsatisfactory target selectivity, and obstacles toward large-scale manufacturability are rigorously analyzed. Ultimately, this review constructs a holistic unified framework bridging polymer molecular design, fabrication engineering, signal transduction, and practical end-use applications, laying a clear developmental roadmap for next-generation flexible and smart hydrogel-based sensing systems. Full article

Biodegradable poly(lactide)/poly(ε-caprolactone) (PLA/PCL) systems functionalized with TiO₂-SiO₂ were synthesized via in situ ring-opening polymerization of a eutectic L-lactide/ε-caprolactone system. This work introduces a TiO₂-SiO₂ composite with a dual function, acting as a catalytic initiator that governs polymerization and microstructure, while simultaneously serving as a reinforcing and photocatalytic phase. The system exhibits high polymerization efficiency, reaching conversions up to 99% with low filler loadings (0.1–1.0 wt%). Structural analyses confirm polymer formation and reveal modifications in ester groups associated with coordination-driven mechanisms. Notably, the presence of TiO₂-SiO₂ promotes increased PLA tacticity, directly influencing mechanical performance. The resulting materials show enhanced tensile strength (~250,000 Pa) and Young’s modulus (1.5–2.0 MPa) compared to conventional systems. In addition, excellent photocatalytic activity was achieved, with up to 99.7% degradation of methyl orange. These findings demonstrate a synergistic strategy to simultaneously control polymer structure and functionality, positioning PLA/PCL–TiO₂-SiO₂ systems as promising multifunctional materials for environmental applications. Full article

Dielectric barrier discharge (DBD) plasma provides a solvent-free and energy-efficient approach for the in situ polymerization of styrene on cotton textiles. Traditional methods for polystyrene (PS) coating often require elevated temperatures, chemical initiators, or organic solvents, conditions that are incompatible with porous, heat-sensitive substrates such as cotton. In this work, we demonstrate that DBD plasma can initiate and sustain styrene polymerization directly on cotton fibers under ambient conditions. FT-IR spectroscopy confirms the consumption of the vinyl C=C bond and the formation of atactic, amorphous polystyrene. Thermogravimetric analysis indicates that the cotton coated with DBD polymerized PS exhibits enhanced thermal stability compared to cotton coated with commercial PS. Additionally, UV aging tests confirm that the plasma-deposited coating maintains its hydrophobicity after exposure to light. Together, these findings highlight DBD plasma as a sustainable and effective approach for producing hydrophobic, thermally robust, and UV-stable textile coatings without the need for solvents, initiators, or harsh processing conditions. Full article

A viable tactic to effectively address the climate crisis is the production of renewable fuels via photocatalytic reactions using solar energy and available resources like carbon dioxide (CO₂) and water. Organic polymer material-based photocatalytic materials are thought to be one way to convert solar energy into valuable chemicals and other solar fuels. The use of porous organic polymers (POPs) for CO₂ fixation and capture and sequestration to produce beneficial compounds to reduce global warming is still receiving a lot of interest. Visible light-responsive organic photopolymers that are functionally designed and include a large number of heteroatoms and an extended π-conjugation allow for the generation of photogenerated charge carriers, improved absorption of visible light, increased charge separation, and decreased charge recombination during photocatalysis. Due to their rigid structure, high surface area, flexible pore size, permanent porosity, and adaptability of the backbone for the intended purpose, POPs have drawn more and more attention. These qualities have been shown to be highly advantageous for numerous sustainable applications. POPs may be broadly categorized as crystalline or amorphous according to how much long-range order they possess. In terms of performance, conducting POPs outperform inorganic semiconductors and typical organic dyes. They are light-harvesting materials with remarkable optical characteristics, photostability, cheap cost, and low cytotoxicity. Through cocatalyst loading and morphological tweaking, this review presents optimization options for POPs preparation techniques. We provide an analysis of the ways in which the preparative techniques will affect the materials’ physicochemical characteristics and, consequently, their catalytic activity. An inventory of experimental methods is provided for characterizing POPs’ optical, morphological, electrochemical, and catalytic characteristics. The focus of this review is to thoroughly investigate the photochemistry of these polymeric organic photocatalysts with an emphasis on understanding the processes of internal charge generation and transport within POPs. The review covers several types of amorphous POP materials, including those based on conjugated microporous polymers (CMPs), inherent microporosity polymers, hyper-crosslinked polymers, and porous aromatic frameworks. Additionally, common synthetic approaches for these materials are briefly discussed. Full article

The industrial production of polyhydroxyalkanoates (PHAs) faces several limitations that hinder their competitiveness against traditional plastics, mainly due to high production costs and complex recovery processes. Innovations in microbial biotechnology offer promising solutions to overcome these challenges. The modification of the biosynthetic pathways is one of the main tactics; allowing for direct carbon flux toward PHA formation, increasing polymer accumulation and improving polymer properties. Additionally, techniques have been implemented to expand the range of renewable substrates used in PHA production. These feedstocks are inexpensive and plentiful but require costly and energy-intensive pretreatment. By removing the need for pretreatment and enabling the direct use of these raw materials, microbial biotechnology aims to reduce production costs. Furthermore, improving downstream processes to facilitate the separation of biomass from culture broth and the recovery of PHAs is critical. Genetic modifications that alter cell morphology and allow PHA secretion directly into the culture medium simplify the extraction and purification process, significantly reducing operating costs. These advances in microbial biotechnology not only enhance the efficient and sustainable production of PHAs, but also position these biopolymers as a viable and competitive alternative to petroleum-based plastics, contributing to a circular economy and reducing the dependence on fossil resources. Full article

Nanocomposites with polymer matrix provide tremendous opportunities to investigate new functions beyond those of traditional materials. The global community is gradually tending toward the use of composite and nanocomposite materials. This review is aimed at reporting the recent developments and understanding revolving around hybridizing fillers for composite materials. The influence of various analyses, characterizations, and mechanical properties of the hybrid filler are considered. The introduction of hybrid fillers to polymer matrices enhances the macro and micro properties of the composites and nanocomposites resulting from the synergistic interactions between the hybrid fillers and the polymers. In this review, the synergistic impact of using hybrid fillers in the production of developing composite and nanocomposite materials is highlighted. The use of hybrid fillers offers a viable way to improve the mechanical, thermal, and electrical properties of these sophisticated materials. This study explains the many tactics and methodologies used to install hybrid fillers into composite and nanocomposite matrices by conducting a thorough analysis of recent research. Furthermore, the synergistic interactions of several types of fillers, including organic–inorganic, nano–micro, and bio-based fillers, are fully investigated. The performance benefits obtained from the synergistic combination of various fillers are examined, as well as their prospective applications in a variety of disciplines. Furthermore, the difficulties and opportunities related to the use of hybrid fillers are critically reviewed, presenting perspectives on future research paths in this rapidly expanding area of materials science. Full article

This research was devoted to study the effect of the tacticity on the surface physicochemical properties of PMMA. (1) Background: The determination of the surface free energy of polymers is generally carried out by inverse gas chromatography (IGC) at infinite dilution. The dispersive, polar and surface acid-base properties of PMMA at different tacticities were obtained via IGC technique with the help of the net retention time and volume of adsorbed. (2) Methods: The London dispersion equation was used to quantify the polar free energy of adsorption, while the London dispersive surface energy ${\gamma }_s^d\left(T\right)$ of PMMAs was determined using the thermal model. (3) Results: The results showed non-linear variations of ${\gamma }_s^d\left(T\right)$ of atactic, isotactic, and syndiotactic PMMAs with three maxima characterizing the three transition temperatures of PMMAs. The obtained values of the enthalpic and entropic Lewis’s acid-base parameters showed that the basicity of the atactic PMMA was about four times larger than its acidity. (4) Conclusions: A large difference in the behavior of the various PMMAs was proven in the different values of the polar acid and base surface energies of the three PMMAs with an important effect of the tacticity of PMMA on its acid-base surface energies. Full article

NMR analysis combined with statistical modeling offers a useful approach to investigate the microstructures of polymers. This article provides a selective review of the developments in both the NMR analysis of biobased polymers and the statistical models that can be used to characterize these materials. The information obtained from NMR and statistical models can provide insights into the microstructure and stereochemistry of appropriate biobased polymers and establish a systematic approach to their analysis. In suitable cases, the analysis can help optimize the synthetic procedures and facilitate the development of new or modified polymeric materials for various applications. Examples are given of the studies of poly(hydroxyalkanoates), poly(lactic acid), and selected polysaccharides, e.g., alginate, pectin, and chitosan. This article may serve as both a reference and a guide for future workers interested in the NMR sequence analysis of biobased materials. Full article

A synthetic strategy to access asymmetric dinuclear bis(ansa-metallocene) pre-catalysts is described. As a key step, the Pd-catalyzed Suzuki cross-coupling of 9,9-bis(trimethylsilyl)-fluoren-2-yl-boronic acid with a substituted 2-bromo-9H-fluorene generates an asymmetric 2,2′-bifluorene platform, which can be individually functionalized at the two differentiated 9-positions. Herein, as a first demonstration of this strategy, we report the asymmetric dinuclear bis(ansa-zirconocene) complex 2,2′-[{Me₂C(Flu)(Cp)}ZrCl₂][{Me₂C(^7-tBuFlu)(Cp)}ZrCl₂], which has been characterized with NMR spectroscopy and high-resolution mass spectrometry. The performance of this bimetallic pre-catalyst when combined with MAO has been evaluated in ethylene, propylene, and ethylene/1-hexene (co-)polymerization. This pre-catalyst is revealed to be less productive than the mononuclear reference pre-catalyst {Me₂C(^2,7-tBuFlu)(Cp)}ZrCl₂, likely because of higher steric hindrance induced by the linkage at the difluorenyl platform. The resulting (co-)polymers featured only slight differences in terms of molecular weights, tacticity, and comonomer incorporation. No bimodal molecular weight distribution was achieved at any produced polymer; this might have originated from the close similarity of the connected Cp/Flu moieties or a rapid chain-transfer phenomenon between the different active sites which were quite close to each other. Full article

Benzoxazine resins are new thermosetting resins with excellent thermal stability, mechanical properties, and a flexible molecular design, demonstrating promise for applications in marine antifouling coatings. However, designing a multifunctional green benzoxazine resin-derived antifouling coating that combines resistance to biological protein adhesion, a high antibacterial rate, and low algal adhesion is still challenging. In this study, a high-performance coating with a low environmental impact was synthesized using urushiol-based benzoxazine containing tertiary amines as the precursor, and a sulfobetaine moiety into the benzoxazine group was introduced. This sulfobetaine-functionalized urushiol-based polybenzoxazine coating (poly(U−ea/sb)) was capable of clearly killing marine biofouling bacteria adhered to the coating surface and significantly resisting protein attachment. poly(U−ea/sb) exhibited an antibacterial rate of 99.99% against common Gram negative bacteria (e.g., Escherichia coli and Vibrio alginolyticus) and Gram positive bacteria (e.g., Staphylococcus aureus and Bacillus sp.), with >99% its algal inhibition activity, and it effectively prevented microbial adherence. Here, a dual-function crosslinkable zwitterionic polymer, which used an “offensive-defensive” tactic to improve the antifouling characteristics of the coating was presented. This simple, economic, and feasible strategy provides new ideas for the development of green marine antifouling coating materials with excellent performance. Full article

Exploration of high-efficiency stabilization and abundant source-conjugated polymers semiconductor materials with suitable molecular orbital energy levels has always been a hot topic in the field of photocatalytic hydrogen evolution (PHE) from water splitting. In the recent years, constructing the intramolecular donor–acceptor (D–A)-conjugated architecture copolymers has been proved as one of the most excellent photocatalyst modification tactics for optimizing the PHE properties because of unique advantages, including easy regulate band-gap position, fast transfer charge carrier in the intramolecular architecture, superior sunlight absorption capacity and range, large interfacial areas, and so forth. Therefore, in this minireview, we summarize the latest research progress of D–A architecture semiconductor materials for PHE from water splitting. First, we briefly overview the fundamental description and principles for the construction D–A heterostructures in the photocatalytic system. After that, the application of D–A architecture photocatalyst for PHE reaction over different classes of organic semiconductors have been discussed in detail. At last, the present development prospects and future potential challenges of D–A architecture materials are proposed. We hope this minireview has some parameter values for the further developments of intermolecular special structured organic semiconductor material in the future PHE research. Full article

Coagulative nucleation in the copolymerization of methyl methacrylate–butyl acrylate (MMA-BA) via semicontinuous emulsion heterophase polymerization (SEHP) under monomer-starved conditions in latexes with high solid content (50.0 wt %) and low concentrations of surfactant is reported. The SEHP technique allows the obtention of latex with high colloidal stability and has potential industrial application in polymer synthesis. High instantaneous conversions (>90%) and a high-ratio polymerization rate/addition rate (R_p/R_a) ≥ 0.9 were obtained at low times until the final copolymerization, which confirmed the starved conditions in the systems at the highest surfactant concentrations. The particle size exhibited a linear size increment at conversions between 0 and 40% induced by homogeneous nucleation, a transition region between 40 and 50%, and non-linear behavior at higher conversions by coagulative nucleation. These three behaviors were also observed in the particle surfactant coverage area (Sc), Z-potential, particle coagulation rate (dN_p/dt) by the Smoluchowski model, final particle size (Dp_z), and number particle (N_p) through the reaction. By means of transmission electron microscopy (TEM) images, the onset of coagulation was observed from 50% of conversion until the end of the reaction. In addition, in both processes of copolymerization, tacticity was displayed (mainly syndiotacticity). Full article

Hydrogels have emerged as important soft materials with numerous applications in fields including biomedicine, biomimetic smart materials, and electrochemistry. Because of their outstanding photo-physical properties and prolonged colloidal stability, the serendipitous findings of carbon quantum dots (CQDs) have introduced a new topic of investigation for materials scientists. CQDs confined polymeric hydrogel nanocomposites have emerged as novel materials with integrated properties of the individual constituents, resulting in vital uses in the realm of soft nanomaterials. Immobilizing CQDs within hydrogels has been shown to be a smart tactic for preventing the aggregation-caused quenching effect and also for manipulating the characteristics of hydrogels and introducing new properties. The combination of these two very different types of materials results in not only structural diversity but also significant improvements in many property aspects, leading to novel multifunctional materials. This review covers the synthesis of doped CQDs, different fabrication techniques for nanostructured materials made of CQDs and polymers, as well as their applications in sustained drug delivery. Finally, a brief overview of the present market and future perspectives are discussed. Full article

Hepatocellular carcinoma (HCC) is a tumor that poses a serious threat to human health, with an extremely low five-year survival rate due to its difficulty in early diagnosis and insensitivity to radiotherapy and chemotherapy. To improve the therapeutic efficiency of HCC, we developed a novel multifunctional nanoplatform (SCF NPs) with an amphiphilic polymer (Ce6-PEG2000-FA) and a multitarget tyrosine kinase inhibitor sunitinib. SCF NPs showed superior therapeutical efficiency for HCC due to the synergetic effect of molecular targeted therapy and phototherapy. The Ce6-PEG2000-FA not only serves as a nanocarrier with excellent biocompatibility but also can act as a therapeutic reagent for photothermal therapy (PTT) and photodynamic therapy (PDT). Furthermore, the folic acid group of Ce6-PEG2000-FA enhanced the active targeting performance of SCF NPs. As a multitargeted tyrosine kinase inhibitor, sunitinib in SCF NPs can play a role in molecular targeted therapies, including tumor growth inhibition and anti-angiogenesis. In vivo experiments, SCF NPs showed multimode imaging capabilities, which can be used for tumorous diagnosis and intraoperative navigation. Meanwhile, SCF NPs showed outstanding synergetic tumor inhibition ability. Tumors of SCF NPs group with laser radiation were eradicated without any recrudescence after 14 days of treatment. Such theranostic nanoparticles offer a novel therapeutic tactic for HCC. Full article

In this study, several experimental techniques were applied to probe thermal properties, molecular dynamics, crystallization kinetics and intermolecular interactions in binary mixtures (BMs) composed of flutamide (FL) and various poly(N-vinylpyrrolidone) (PVP) polymers, including a commercial product and, importantly, samples obtained from high-pressure syntheses, which differ in microstructure (defined by the tacticity of the macromolecule) from the commercial PVP. Differential Scanning Calorimetry (DSC) studies revealed a particularly large difference between the glass transition temperature (T_g) of FL+PVPsynth. mixtures with 10 and 30 wt% of the excipient. In the case of the FL+PVPcomm. system, this effect was significantly lower. Such unexpected findings for the former mixtures were strictly connected to the variation of the microstructure of the polymer. Moreover, combined DSC and dielectric measurements showed that the onset of FL crystallization is significantly suppressed in the BM composed of the synthesized polymers. Further non-isothermal DSC investigations carried out on various FL+10 wt% PVP mixtures revealed a slowing down of FL crystallization in all FL-based systems (the best inhibitor of this process was PVP M_n = 190 kg/mol). Our research indicated a significant contribution of the microstructure of the polymer on the physical stability of the pharmaceutical—an issue completely overlooked in the literature. Full article