Search Results (428)

The growth potential of Crinum bulbispermum was evaluated on gold mine tailings. The primary objectives were to model the species’ climatic niche in relation to gold mining regions, assess its germination success on tailings, and compare seedling survival and growth on tailings versus other soil types. Species distribution modelling identified the South African Grassland Biome on the Highveld (1000+ m above sea level), where the majority of gold mines are located, as highly suitable for the species. Pot trials demonstrated above 85% germination success across all soil treatments, including gold mine tailings, indicating its potential for restoration through direct seeding. An initial seedling establishment rate of 100% further demonstrated the species’ resilience to mine tailings, which are often seasonally dry, nutrient-poor, and may contain potentially toxic metals. However, while C. bulbispermum was able to germinate and establish in mine tailings, long-term growth potential (over 12 months) was constrained by low organic carbon content (0.11%) and high salinity (194.50 mS/m). These findings underscore the critical role of soil chemistry and organic matter in supporting long-term plant establishment and growth on gold tailings. Building on previous research, this study confirms the ability of this thick-rooted geophyte to tolerate chemically extreme soil conditions. Crinum bulbispermum shows promise for phytostabilization and as a potential medicinal plant crop on tailings. However, future research on microbial community interactions and soil amendment strategies is essential to ensure its long-term sustainability. Full article

Heavy metal pollution represents a pervasive environmental challenge that significantly exacerbates the ever-increasing crisis of antimicrobial resistance and the capacity of microorganisms to endure and proliferate despite antibiotic interventions. This review examines the intricate relationship between heavy metals and AMR, with an emphasis on the underlying molecular mechanisms and ecological ramifications. Common environmental metals, including arsenic, mercury, cadmium, and lead, exert substantial selective pressures on microbial communities. These induce oxidative stress and DNA damage, potentially leading to mutations that enhance antibiotic resistance. Key microbial responses include the overexpression of efflux pumps that expel both metals and antibiotics, production of detoxifying enzymes, and formation of protective biofilms, all of which contribute to the emergence of multidrug-resistant strains. In the soil environment, particularly the rhizosphere, heavy metals disrupt plant–microbe interactions by inhibiting beneficial organisms, such as rhizobacteria, mycorrhizal fungi, and actinomycetes, thereby impairing nutrient cycling and plant health. Nonetheless, certain microbial consortia can tolerate and detoxify heavy metals through sequestration and biotransformation, rendering them valuable for bioremediation. Advances in biotechnology, including gene editing and the development of engineered metal-resistant microbes, offer promising solutions for mitigating the spread of metal-driven AMR and restoring ecological balance. By understanding the interplay between metal pollution and microbial resistance, we can more effectively devise strategies for environmental protection and public health. Full article

The worldwide agriculture industry is facing increasing problems due to rapid population increase and increasingly unfavorable weather patterns. In order to reach the projected food production targets, which are essential for guaranteeing global food security, innovative and sustainable agricultural methods must be adopted. Conventional approaches, including traditional breeding procedures, often cannot handle the complex and simultaneous effects of biotic pressures such as pest infestations, disease attacks, and nutritional imbalances, as well as abiotic stresses including heat, salt, drought, and heavy metal toxicity. Applying phytohormonal approaches, particularly those involving hormonal crosstalk, presents a viable way to increase crop resilience in this context. Abscisic acid (ABA), gibberellins (GAs), auxin, cytokinins, salicylic acid (SA), jasmonic acid (JA), ethylene, and GA are among the plant hormones that control plant stress responses. In order to precisely respond to a range of environmental stimuli, these hormones allow plants to control gene expression, signal transduction, and physiological adaptation through intricate networks of antagonistic and constructive interactions. This review focuses on how the principal hormonal signaling pathways (in particular, ABA-ET, ABA-JA, JA-SA, and ABA-auxin) intricately interact and how they affect the plant stress response. For example, ABA-driven drought tolerance controls immunological responses and stomatal behavior through antagonistic interactions with ET and SA, while using SnRK2 kinases to activate genes that react to stress. Similarly, the transcription factor MYC2 is an essential node in ABA–JA crosstalk and mediates the integration of defense and drought signals. Plants’ complex hormonal crosstalk networks are an example of a precisely calibrated regulatory system that strikes a balance between growth and abiotic stress adaptation. ABA, JA, SA, ethylene, auxin, cytokinin, GA, and BR are examples of central nodes that interact dynamically and context-specifically to modify signal transduction, rewire gene expression, and change physiological outcomes. To engineer stress-resilient crops in the face of shifting environmental challenges, a systems-level view of these pathways is provided by a combination of enrichment analyses and STRING-based interaction mapping. These hormonal interactions are directly related to the United Nations Sustainable Development Goals (SDGs), particularly SDGs 2 (Zero Hunger), 12 (Responsible Consumption and Production), and 13 (Climate Action). This review emphasizes the potential of biotechnologies to use hormone signaling to improve agricultural performance and sustainability by uncovering the molecular foundations of hormonal crosstalk. Increasing our understanding of these pathways presents a strategic opportunity to increase crop resilience, reduce environmental degradation, and secure food systems in the face of increasing climate unpredictability. Full article

Biochar, a porous carbonaceous material derived from the pyrolysis of biomass under oxygen-limited conditions, offers several advantages for environmental remediation, including a high specific surface area, ease of preparation, and abundant raw material sources. However, the application of pristine biochar is limited by its inherent physicochemical shortcomings, such as a lack of active functional groups and limited elemental compositions. To overcome these limitations, metal-modified biochars have garnered increasing attention. In particular, iron-manganese (Fe-Mn) modification significantly enhances the adsorption capacity, redox potential, and microbial activity of biochar, owing to the synergistic interactions between Fe and Mn. Iron-manganese-modified biochar (FM-BC) has demonstrated effective removal of heavy metals, organic matter, phosphate, and nitrate through mechanisms including mesoporous adsorption, redox reactions, complexation, electrostatic interactions, and precipitation. Moreover, FM-BC can improve soil physicochemical properties and support plant growth, highlighting its promising potential for broader environmental application. This review summarizes the preparation methods, environmental remediation mechanisms, and practical applications of FM-BC and discusses future directions in mechanism elucidation, biomass selection, and engineering implementation. Overall, FM-BC, with its tunable properties and multifunctional capabilities, emerges as a promising and efficient material for addressing complex environmental pollution challenges. Full article

Micronutrient deficiencies adversely affect human health and pose a significant global threat. Enhancing the accumulation of micronutrients in the edible parts of crops through genetic breeding is a promising strategy to mitigate micronutrient deficiencies in humans. FW2.2-like (FWL) genes play crucial roles in regulating heavy metal homeostasis in plants. We previously obtained two allelic mutants for each of the rice OsFWL1 (osfwl1a and osfwl1b) and OsFWL2 (osfwl2a and osfwl2b) genes. In this study, we showed that disruption of either OsFWL1 or OsFWL2 significantly enhanced the accumulation of metallic micronutrients in brown rice. Compared with that in the wild type, the iron (Fe) concentration in brown rice was higher in the osfwl1a (+166.7%), osfwl1b (+24.3%), and osfwl2a (+99.2%) mutants; the manganese (Mn) concentration was elevated in all four mutants (+25.1% to 35.6%); the copper (Cu) concentration increased in osfwl2a (+31.0%) and osfwl2b (+29.0%); and the zinc (Zn) concentration increased in osfwl2a (+10.2%). Additionally, disruption of OsFWL1 or OsFWL2 affected the homeostasis of metallic micronutrients in seedlings. Transcriptome analysis suggested that OsFWL1 and OsFWL2 might regulate cell wall polysaccharide metabolism and the expression of heavy metal transporter genes. Protein interaction analysis revealed that OsFWL1 interacted with OsFWL2 on the cell membrane. These findings suggest that OsFWL1 and OsFWL2 can serve as genetic biofortification tools to increase the concentrations of metallic micronutrients in rice grains. Full article

It is of great importance to explore how plants respond to excess accumulation of Cu and Ni in soil, yet the mechanisms by which Euphorbia marginata, a common ornamental plant in China, responds to heavy metal stress remain unclear. In this study, E. marginata seedlings were subjected to CK, Ni 500 mg/kg, and Cu 900 mg/kg, with Ni-Cu combined stress, and their growth, physiological indexes, heavy metal accumulation, and their corresponding gene expression were evaluated after 45 d. The results showed that the two heavy metals mainly accumulated in plant roots and severely inhibited root growth, while the combined stress promoted the accumulation of heavy metals to a small extent. Either Cu or Ni stresses inhibit photosynthetic pigment synthesis as well as activate antioxidant and osmoregulatory systems, but there are differences in their effects. Combined stress has a synergistic stress effect, severely damaging the cell membrane structure and leading to dysregulation of antioxidant and osmoregulatory systems. The expression of CDPK, CaMCML, MEKK3/6 signaling factors, UFGT, and COMT was severely suppressed under the combined stresses of Cu and Ni compared to the single stress of both. These results provide evidence of a specific defense response to heavy metal stress in E. marginata, which could help guide new research efforts and support the development of strategies for phytoremediation using E. marginata. Full article

Cancers, particularly those resistant to treatment, stand as one of the most significant challenges in medicine. Frequently, available therapies need to be improved, underscoring the necessity for innovative treatment modalities. Over the years, there has been a resurgence of interest in natural plant substances, which have been traditionally overlooked as anticancer agents. A prime example of this is natural antioxidants, such as acteoside (ACT) and orientin (ORI), which offer novel approaches to cancer treatment, emphasizing liver cancer compared to other cancer types. They reduce oxidative stress by activating the Nrf2/ARE pathway and exhibit anticancer activity, e.g., decreasing Bcl-2 and Bcl-XL expression and increasing Bax levels. This review explores the individual effects of ACT and ORI and their synergistic interactions with sorafenib, temozolomide, 5-fluorouracil (for ACT), celecoxib, and curcumin (for ORI), highlighting their enhanced anticancer efficacy. In addition, ACT and ORI successfully integrate into various drug delivery systems (DDSs), including metal-containing carriers such as nanoparticles (NPs), nanoshells (NSs), quantum dots (QDs), and liposomes as representative examples of lipid-based drug delivery systems (LBDDSs). Advanced methods, including nanotechnology, offer potential solutions to low bioavailability, paving the way for the use of these substances in anticancer therapy. Full article

Phytoremediation is based on the use of plants to decontaminate water and soil. In this work, the capacity of high Andean vegetation in the absorption and translocation of heavy metals was analyzed. Species were identified to analyze the presence of metals in roots, stems, and leaves by spectrometry. The translocation factor was determined and analyzed by means of pattern clusters. Based on the floristic inventory, the dominance of the Poaceae and Asteraceae families was determined, and 12 plant species with a high importance value were selected. According to the ICP-AES, mercury (951.07 mg/kg) was determined in the roots of Lachemilla orbiculata, and chromium (21.88 mg/kg) in Carex bonplandii. Arsenic (2.79 mg/kg) was detected as being significantly higher than the values recorded in lowland plants. Cadmium mobility was high in all species, reaching higher values in Baccharis salicifolia (86.28%) and Calamagrostis intermedia (37.16%). Rumex acetocella accumulated lead in leaves (9.27%), while Taraxacum officinale (1.20%) and Calamagrostis intermedia (1.20%) accumulated silicon. Stabilization of chromium, mercury, and sodium was determined in the roots without translocation to higher organs. Finally, cluster analysis showed physiological interactions between metals as a toxicity mitigation mechanism affecting mobility. These findings suggest that they are hyperaccumulator species. Full article

The application of nanoparticles in agriculture has garnered significant attention due to their potential to enhance plant growth, resistance to stress, and overall productivity. Nanoparticles can trigger physiological and biochemical changes in plants, promoting growth under both optimal and suboptimal environmental conditions. This review explores the mechanisms by which nanoparticles interact with plants, focusing on their role in improving nutrient uptake, stimulating growth, enhancing stress tolerance, and modulating plant metabolic pathways. Furthermore, it examines metal-based nanoparticles that have shown promising biostimulatory effects, their synthesis methods, and their applications in different agricultural systems. Despite the promising results, challenges remain, such as toxicity, environmental impact, and regulatory hurdles, which are crucial for the safe integration of nanoparticles into agricultural practices. The present review article aims to provide a brief overview of the current state of research on nanoparticle-based plant growth enhancers, and their potential to revolutionize sustainable agriculture. Full article

In high-pressure thermal power systems, corrosion-induced wall thinning in steam pipelines poses a significant threat to operational safety and efficiency. This study investigates the effects of gas–liquid two-phase flow on corrosion-induced wall thinning in pipe bends of high-pressure heaters in power plants, with particular emphasis on the mechanisms of void fraction and inner wall surface roughness. Research reveals that an increased void fraction significantly enhances flow turbulence and centrifugal effects, resulting in elevated pressure and Discrete Phase Model (DPM) concentration at the bend, thereby intensifying erosion phenomena. Simultaneously, the turbulence generated by bubble collapse at the bend promotes the accumulation and detachment of corrosion products, maintaining a cyclic process of erosion and corrosion that accelerates wall thinning. Furthermore, the increased surface roughness of the inner bend wall exacerbates the corrosion process. The rough surface alters local flow characteristics, leading to changes in pressure distribution and DPM concentration accumulation points, subsequently accelerating corrosion progression. Energy-Dispersive Spectroscopy (EDS) and Scanning Electron Microscopy (SEM) analyses reveal changes in the chemical composition and microstructural characteristics of corrosion products. The results indicate that the porous structure of oxide films fails to effectively protect against corrosive media, while bubble impact forces damage the oxide films, exposing fresh metal surfaces and further accelerating the corrosion process. Comprehensive analysis demonstrates that the interaction between void fraction and surface roughness significantly intensifies wall thinning, particularly under conditions of high void fraction and high roughness, where pressure and DPM concentration at the bend may reach extreme values, further increasing corrosion risk. Therefore, optimization of void fraction and surface roughness, along with the application of corrosion-resistant materials and surface treatment technologies, should be considered in pipeline design and operation to mitigate corrosion risks. Full article

The growing prevalence of bacterial infections and the alarming rise of antimicrobial resistance (AMR) have driven the need for innovative antimicrobial coatings for medical implants and biomaterials. However, implant surface properties, such as roughness, chemistry, and reactivity, critically influence biological interactions and must be engineered to ensure biocompatibility, corrosion resistance, and sustained antibacterial activity. This review evaluates three principal categories of antimicrobial agents utilized in surface functionalization: metal/metaloxide nanoparticles, antibiotics, and phytochemical compounds. Metal/metaloxide-based coatings, especially those incorporating silver (Ag), zinc oxide (ZnO), and copper oxide (CuO), offer broad-spectrum antimicrobial efficacy through mechanisms such as reactive oxygen species (ROS) generation and bacterial membrane disruption, with a reduced risk of resistance development. Antibiotic-based coatings enable localized drug delivery but often face limitations related to burst release, cytotoxicity, and diminishing effectiveness against multidrug-resistant (MDR) strains. In contrast, phytochemical-derived coatings—using bioactive plant compounds such as curcumin, eugenol, and quercetin—present a promising, biocompatible, and sustainable alternative. These agents not only exhibit antimicrobial properties but also provide anti-inflammatory, antioxidant, and osteogenic benefits, making them multifunctional tools for implant surface modification. The integration of these antimicrobial strategies aims to reduce bacterial adhesion, inhibit biofilm formation, and enhance tissue regeneration. By leveraging the synergistic effects of metal/metaloxide nanoparticles, antibiotics, and phytochemicals, next-generation implant coatings hold the potential to significantly improve infection control and clinical outcomes in implant-based therapies. Full article

This study examined the impact of watering with air and oxygen nanobubble-saturated water (NBSW) on soil moisture retention, electrical conductivity (EC), nutrient leaching, and CO₂ emissions in sandy loam (SL) and silty clay loam (SCL) soils amended with composted sludge (CS). The results revealed that air nanobubbles (air NBs) had greater stability, while oxygen nanobubbles (ONBs) showed lower stability but higher oxygen diffusion potential. Soil moisture under NBSW treatment was more sensitive to changes in ambient conditions and tended to decrease due to higher evaporation compared to conventional water. NBSW was more effective in enhancing moisture in SL soil than in SCL soil. Overall, the results revealed that the application of NBSW tended to increase soil compaction due to stimulation of microbial activity; however, air NBs may temporarily reduce compaction and enhance soil–water interactions. Additionally, NBSW increased soil EC due to increased dissolved ion concentration, with effects more apparent in SL soil than in SCL. This may indicate increased nutrient availability for plant uptake. Notably, NBSW, particularly ONB, showed quick but short-lived changes in soil physical and microbial properties, and soil texture played a significant role in treatment results. Furthermore, the leaching of nutrients and heavy metals remained negligible across all treatments. The study confirms that using NB in controlled environments is more practical for boosting short-term plant growth than improving long-term soil water retention to support more sustainable agriculture systems. Full article

Non-invasive Micro-test Technology (NMT) represents a pioneering approach in the study of physiological functions within living organisms. This technology possesses the remarkable capability to monitor the flow rates and three-dimensional movement directions of ions or molecules as they traverse the boundaries of living organisms without sample destruction. The advantages of NMT are multifaceted, encompassing real-time, non-invasive assessment, a wide array of detection indicators, and compatibility with diverse sample types. Consequently, it stands as one of the foremost tools in contemporary plant physiological research. This comprehensive review delves into the applications and research advancements of NMT within the field of plant abiotic stress physiology, including drought, salinity, extreme temperature, nutrient deficiency, ammonium toxicity, acid stress, and heavy metal toxicity. Furthermore, it offers a forward-looking perspective on the potential applications of NMT in plant physiology research, underscoring its unique capacity to monitor the flux dynamics of ions/molecules (e.g., Ca²⁺, H⁺, K⁺, and IAA) in real time, reveal early stress response signatures through micrometer-scale spatial resolution measurements, and elucidate stress adaptation mechanisms by quantifying bidirectional nutrient transport across root–soil interfaces. NMT enhances our understanding of the spatiotemporal patterns governing plant–environment interactions, providing deeper insights into the molecular mechanism of abiotic stress resilience. Full article

Humic acid (HA), a major component of soil organic matter, is a naturally occurring macromolecule formed through the decomposition of plant and microbial residues. Its molecular structure comprises functional groups such as carboxyl, phenolic, hydroxyl, and carbonyl functional groups, which enable HA to interact with soil particles, nutrients, and biological systems. These interactions significantly contribute to soil fertility and overall plant productivity. Functionally, HA enhances soil health by increasing cation exchange capacity, improving water retention, and promoting the formation and stabilization of soil aggregates. In addition to its role in soil conditioning, HA is essential in mitigating plant stress. It achieves this by modulating antioxidant enzyme activity, stabilizing cellular membranes, and alleviating the adverse effects of abiotic stressors such as salinity, drought, and heavy metal toxicity. This review highlights the structural characteristics of HA, its structure-based functions, and the mechanisms involved in plant stress alleviation. Additionally, we explore how HA can be modified through physical, chemical, and biological approaches to enhance its agronomic performance. These modifications are designed to improve HA agronomic efficiency by increasing nutrient bioavailability, reducing environmental losses through minimized leaching and volatilization, and supporting sustainable agricultural practices. Overall, this review underscores the multifaceted roles of HA in promoting plant resilience to environmental stress, highlighting its potential as a key agent in the development of sustainable and eco-friendly crop production systems. Full article

Plant microbiomes, composed of a diverse array of microorganisms such as bacteria, fungi, archaea, and microalgae, are critical to plant health and resilience, playing key roles in nutrient cycling, stress mitigation, and disease resistance. Climate change is expected to intensify various abiotic stressors, such as drought, salinity, temperature extremes, nutrient deficiencies, and heavy metal toxicity. Plant-associated microbiomes have emerged as a promising natural solution to help mitigate these stresses and enhance agricultural resilience. However, translating laboratory findings into real-world agricultural benefits remains a significant challenge due to the complexity of plant–microbe interactions under field conditions. We explore the roles of plant microbiomes in combating abiotic stress and discuss advances in microbiome engineering strategies, including synthetic biology, microbial consortia design, metagenomics, and CRISPR-Cas, with a focus on enhancing their practical application in agriculture. Integrating microbiome-based solutions into climate-smart agricultural practices may contribute to long-term sustainability. Finally, we underscore the importance of interdisciplinary collaboration in overcoming existing challenges. Microbiome-based solutions hold promise for improving global food security and promoting sustainable agricultural practices in the face of climate change. Full article