Search Results (35)

The Aedes aegypti mosquito exhibits a critical behavioral adaptation through its oviposition strategy, laying eggs in dry and wet environments just above the water level, allowing eggs to resist desiccation and hatch only when submerged by rain. To investigate this mechanism, we developed a nonlinear dynamic model incorporating climate-driven parameters affecting egg hatching and adult emergence. Theoretical analysis revealed an imperfect pitchfork bifurcation giving rise to a phenomenon we term basin-mediated hysteresis. Unlike classical hysteresis, which relies on coexisting stable states, this mechanism results from the progressive collapse of the extinction basin boundary. As the control parameter approaches its critical value, the basin of attraction of the trivial equilibrium shrinks. Once the population establishes itself above the threshold, returning the parameter below unity does not restore extinction, leading to an irreversible transition governing population persistence. The model was validated using field data from mosquito traps in a Brazilian city, showing strong agreement with observed seasonal patterns of female captures. Parameters were optimized using the Differential Evolution algorithm, yielding high correlation between model and field data. The results demonstrate that the dual oviposition strategy underlies population persistence and seasonal peaks, providing information for planning interventions amid global arbovirus expansion. Full article

This paper investigates the dynamics of a permanent magnet synchronous motor (PMSM) and controls its chaotic speed behavior using the synergetic control technique (SCT). The model includes electrical dynamics in the dq frame and mechanical speed dynamics, with a scalar parameter $\gamma$ capturing cross-coupling effects. The equilibrium structure and local stability properties of the PMSM are analyzed. For zero input voltages and zero load torque, the system exhibits a pitchfork-type bifurcation in the electrical–mechanical equilibrium as $\gamma$ crosses a critical value. Explicit expressions are derived for all equilibria, and their stability is characterized using eigenvalue analysis and the Routh–Hurwitz criterion, and a secondary loss of stability via a Hopf-type mechanism is identified. The case of nonzero input voltages with zero load torque is also discussed. Numerical simulations confirm the analytical results and highlight the parameter regions that admit stable operation. Bifurcation diagrams show the different PMSM behaviors as the parameter $\gamma$ varies. For a certain interval of $\gamma$, the PMSM speed undergoes chaotic oscillations. The SCT is introduced to control the chaos. Macro variables are chosen to design the SCT. The derived SCT is implemented to eliminate the chaotic speed. The controller provides good performance in suppressing the chaos. The controller is tested under sudden reference speed change where the controller gets the new reference speed accurately. It is also evaluated under sudden and sinusoidal load torque variations. Full article

A comprehensive numerical analysis has been conducted to investigate unsteady natural convection (UNC), bifurcation behavior, and heat transfer (HT) in a rectangular enclosure containing thermally stratified air. The enclosure comprises a uniformly heated bottom wall, thermally stratified vertical sidewalls, and a cooled top wall. To assess thermal performance, square and rectangular cavities with identical boundary conditions and working fluid are considered. The finite volume method (FVM) is used to solve the governing equations over a wide range of Rayleigh numbers (Ra = 10¹ to 10⁹) for air with a Prandtl number (Pr) of 0.71. Flow dynamics and thermal performance are analyzed using temperature time series (TTS), limit point–limit cycle behavior, average Nusselt number (Nu_avg), average entropy generation (S_avg), average Bejan number (Be_avg), and the ecological coefficient of performance (ECOP). In the rectangular cavity, the transition from steady to chaotic flow exhibits three bifurcations: a pitchfork bifurcation at Ra = 3 × 10⁴–4 × 10⁴, a Hopf bifurcation at Ra = 3 × 10⁶–4 × 10⁶, and the onset of chaotic flow at Ra = 9 × 10⁷–2 × 10⁸. The comparative analysis indicates that Nu_avg remains nearly identical for both cavities within Ra = 10⁵ to 10⁷. However, at Ra = 10⁸, the HT rate in the rectangular cavity is 29.84% higher than that of the square cavity, while S_avg and Be_avg differ by 39.32% and 37.50%, respectively. Despite higher HT and S_avg in the rectangular enclosure, the square cavity demonstrates superior overall thermal performance by 13.52% at Ra = 10⁸. These results offer significant insights for optimizing cavity geometries in thermal system design based on energy efficiency and entropy considerations. Full article

This work investigates the dynamical properties of the Kolmogorov–Petrovskii–Piskunov (KPP) equation. We begin by establishing its non-integrability through the Painlevé test. Using a traveling wave transformation, we reduce the equation to a planar dynamical system, which we identify as non-conservative. A subsequent bifurcation analysis, supported by Bendixson’s criterion, rules out the existence of periodic orbits and, thus, periodic solutions—a finding further validated by phase portraits. Furthermore, we classify the types and co-dimensions of the bifurcations present in the system. We demonstrate that under certain conditions, the system can exhibit saddle-node, transcritical, and pitchfork bifurcations, while Hopf and Bogdanov–Takens bifurcations cannot occur. This study concludes by systematically deriving a power series solution for the reduced equation. Full article

Span-wise homogeneous supersonic cavity flows display complicated structures due to shear layer breakdown, flow acoustic resonance, and even non-linear hydrodynamic-acoustic interactions. In practical applications, such as aircraft bays, the cavity is of finite width and has doors, both of which introduce distinctive phenomena that couple with the shear layer at the cavity lip, further modulating shear layer bifurcations and tonal mechanisms. In particular, asymmetric states manifest as ‘tornado’ vortices with significant practical consequences on the design and operation. Both inward- and outward-facing leading-wedge doors, resulting in leading edge shocks directed into and away from the cavity, are examined at select opening angles ranging from $22.5°$ to $90°$ (fully open) at Mach 1.6. The computational approach utilizes the Reynolds-Averaged Navier–Stokes equations with a one-equation model and is augmented by experimental observations of cavity floor pressure and surface oil-flow patterns. For the no-doors configuration, the asymmetric results are consistent with a long-time series DDES simulation, previously validated with two experimental databases. When fully open, outer wedge doors (OWD) yield an asymmetric flow, while inner wedge doors (IWD) display only mildly asymmetric behavior. At lower door angles (partially closed cavity), both types of doors display a successive bifurcation of the shear layer, ultimately resulting in a symmetric flow. IWD tend to promote symmetry for all angles observed, with the shear layer experiencing a pitchfork bifurcation at the ‘critical angle’ ($67.5°$). This is also true for the OWD at the ‘critical angle’ ($45°$), though an entirely different symmetric flow field is established. The first observation of pitchfork bifurcations (‘critical angle’) for the IWD is at $67.5°$ and for the OWD, $45°$, complementing experimental observations. The back wall signature of the bifurcated shear layer (impingement preference) was found to be indicative of the 3D cavity dynamics and may be used to establish a correspondence between 3D cavity dynamics and the shear layer. Below the critical angle, the symmetric flow field is comprised of counter-rotating vortex pairs at the front and back wall corners. The existence of a critical angle and the process of door opening versus closing indicate the possibility of hysteresis, a preliminary discussion of which is presented. Full article

Despite significant advances in understanding neuronal development, a fully quantitative framework that integrates intracellular mechanisms with environmental cues during axonal growth remains incomplete. Here, we present a unified biophysical model that captures key mechanochemical processes governing axonal extension on micropatterned substrates. In these environments, axons preferentially align with the pattern direction, form bundles, and advance at constant speed. The model integrates four core components: (i) actin–adhesion traction coupling, (ii) lateral inhibition between neighboring axons, (iii) tubulin transport from soma to growth cone, and (iv) orientation dynamics guided by substrate anisotropy. Dynamical systems analysis reveals that a saddle–node bifurcation in the actin adhesion subsystem drives a transition to a high-traction motile state, while traction feedback shifts a pitchfork bifurcation in the signaling loop, promoting symmetry breaking and robust alignment. An exact linear solution in the tubulin transport subsystem functions as a built-in speed regulator, ensuring stable elongation rates. Simulations using experimentally inferred parameters accurately reproduce elongation speed, alignment variance, and bundle spacing. The model provides explicit design rules for enhancing axonal alignment through modulation of substrate stiffness and adhesion dynamics. By identifying key control parameters, this work enables rational design of biomaterials for neural repair and engineered tissue systems. Full article

This study numerically investigates unsteady natural convection (NC) heat transfer (HT) and entropy generation (E_gen) in trapezoidal cavities filled with two thermally stratified fluids. Both air-filled and water-filled configurations are analyzed to evaluate and compare their thermal performance under varying conditions. The cavities are characterized by a heated base, thermally stratified sloped walls, and a cooled top wall. The governing equations are numerically solved using the finite volume (FV) approach. The study considers a Prandtl number (Pr) of 0.71 for air and 7.01 for water, Rayleigh numbers (Ra) ranging from 10³ to 5 × 10⁷, and an aspect ratio (AR) of 0.5. Flow behavior is examined through various parameters, including temperature time series (TTS), average Nusselt number (Nu), average entropy generation (E_avg), average Bejan number (Be_avg), and ecological coefficient of performance (ECOP). Three bifurcations are identified during the transition from steady to chaotic flow for both fluids. The first is a pitchfork bifurcation, occurring between Ra = 10⁵ and 2 × 10⁵ for air, and between Ra = 9 × 10⁴ and 10⁵ for water. The second, a Hopf bifurcation, is observed between Ra = 4.7 × 10⁵ and 4.8 × 10⁵ for air, and between Ra = 10⁵ and 2 × 10⁵ for water. The third bifurcation marks the onset of chaotic flow, occurring between Ra = 3 × 10⁷ and 4 × 10⁷ for air, and between Ra = 4 × 10⁵ and 5 × 10⁵ for water. At Ra = 10⁶, the average HT in the air-filled cavity is 85.35% higher than in the water-filled cavity, while E_avg is 94.54% greater in the air-filled cavity compared to water-filled cavity. At Ra = 10⁶, the thermal performance of the cavity filled with water is 4.96% better than that of the air-filled cavity. These findings provide valuable insights for optimizing thermal systems using trapezoidal cavities and varying working fluids. Full article

This paper studies the dynamic behavior of a three-dimensional mathematical model of effector–tumor cell interactions that incorporates the impact of chemotherapy. The well-known logistic function is used to model tumor growth. Elementary concepts of singularity theory are used to classify the model steady-state equilibria. I show that the model can predict hysteresis, isola/mushroom, and pitchfork singularities. Useful branch sets in terms of model parameters are constructed to delineate the domains of such singularities. I examine the effect of chemotherapy on bifurcation solutions, and I discuss the efficiency of chemotherapy treatment. I also show that the model cannot predict a periodic behavior for any model parameters. Full article

In this study, a numerical investigation of unsteady natural convection heat transfer (HT) and entropy generation (EG) is performed within a trapezoid-shaped cavity containing thermally stratified water. The cavity’s bottom wall is heated, the sloped walls are thermally stratified, and the top wall is cooled. The finite volume (FV) method is employed to solve the governing equations. This study uses a Prandtl number (Pr) of 7.01 for water, an aspect ratio (AR) of 0.5, and Rayleigh numbers (Ra) varying between 10 and 10⁶. To examine the flow behavior within the cavity, various relevant parameters are determined for different Ra values. These parameters include streamline and isotherm contours, temperature time series, limit point and limit cycle analysis, average Nusselt number (Nu) at the heated walls, average entropy generation (E_avg), and average Bejan number (Be_avg). It is found that the flow transitions from a steady symmetrical state to a chaotic state as the Ra value increases. During this transition, three bifurcations occur. The first is a pitchfork bifurcation between Rayleigh numbers of 9 × 10⁴ and 10⁵, followed by a Hopf bifurcation between Rayleigh numbers of 10⁵ and 2 × 10⁵. Finally, another bifurcation occurs, shifting the flow from periodic to chaotic between Rayleigh numbers of 4 × 10⁵ and 5 × 10⁵. The present study shows an increase in E_avg of 94.97% between Rayleigh numbers of 10³ and 10⁶, while the rate of increase in Nu is 81.13%. The findings from this study will enhance understanding of the fluid flow phenomena in a trapezoid-shaped cavity filled with stratified water. The current numerical results are compared and validated against previously published numerical and experimental data. Full article

Aiming to explore the subtle connection between the number of nonlinear terms in Lorenz-like systems and hidden attractors, this paper introduces a new simple sub-quadratic four-thirds-degree Lorenz-like system, where $\dot{x}=a(y-x)$, $\dot{y}=cx-\sqrt[3]{x}z$, $\dot{z}=-bz+\sqrt[3]{x}y$, and uncovers the following property of these systems: decreasing the powers of the nonlinear terms in a quadratic Lorenz-like system where $\dot{x}=a(y-x)$, $\dot{y}=cx-xz$, $\dot{z}=-bz+xy$, may narrow, or even eliminate the range of the parameter c for hidden attractors, but enlarge it for self-excited attractors. By combining numerical simulation, stability and bifurcation theory, most of the important dynamics of the Lorenz system family are revealed, including self-excited Lorenz-like attractors, Hopf bifurcation and generic pitchfork bifurcation at the origin, singularly degenerate heteroclinic cycles, degenerate pitchfork bifurcation at non-isolated equilibria, invariant algebraic surface, heteroclinic orbits and so on. The obtained results may verify the generalization of the second part of the celebrated Hilbert’s sixteenth problem to some degree, showing that the number and mutual disposition of attractors and repellers may depend on the degree of chaotic multidimensional dynamical systems. Full article

The complex service environment of railway vehicles leads to changes in the wheel–rail adhesion coefficient, and the decrease in critical speed may lead to hunting instability. This paper aims to reveal the diversity of periodic hunting motion patterns and the internal correlation relationship with wheel–rail impact velocities after the hunting instability of a bogie system. A nonlinear, non-smooth lateral dynamic model of a bogie system with 7 degrees of freedom is constructed. The wheel–rail contact relations and the piecewise smooth flange forces are the main nonlinear, non-smooth factors in the system. Based on Poincaré mapping and the two-parameter co-simulation theory, hunting motion modes and existence regions are obtained in the parameter plane consisting of running speed v and the wheel–rail adhesion coefficient μ. Three-dimensional cloud maps of the maximum lateral wheel–rail impact velocity are obtained, and the correlation with the hunting motion pattern is analyzed. The coexistence of periodic hunting motions is further revealed based on combined bifurcation diagrams and multi-initial value phase diagrams. The results show that grazing bifurcation causes the number of wheel–rail impacts to increase at a low-speed range. Periodic hunting motion with period number n = 1 has smaller lateral wheel–rail impact velocities, whereas chaotic motion induces more severe wheel–rail impacts. Subharmonic periodic hunting motion windows within the speed range of chaotic motion, pitchfork bifurcation, and jump bifurcation are the primary forms that induce the coexistence of periodic motion. Full article

Waddington envisioned stem cell differentiation as a marble rolling down a hill, passing through hierarchically branched valleys representing the cell’s temporal state. The terminal valleys at the bottom of the hill indicate the possible committed cells of the multicellular organism. Although originally proposed as a metaphor, Waddington’s hypothesis establishes the fundamental principles for characterizing the differentiation process as a dynamic system: the generated equilibrium points must exhibit hierarchical branching, robustness to perturbations (homeorhesis), and produce the appropriate number of cells for each cell type. This article aims to capture these characteristics using a mathematical model based on two fundamental hypotheses. First, it is assumed that the gene regulatory network consists of hierarchically coupled subnetworks of genes (modules), each modeled as a dynamical system exhibiting supercritical pitchfork or cusp bifurcation. Second, the gene modules are spatiotemporally regulated by feedback mechanisms originating from epigenetic factors. Analytical and numerical results show that the proposed model exhibits self-organized multistability with hierarchical branching. Moreover, these branches of equilibrium points are robust to perturbations, and the number of different cells produced can be determined by the system parameters. Full article

This study introduces a newly modified Lorenz model capable of demonstrating bifurcation within a specified range of parameters. The model demonstrates various bifurcation behaviors, which are depicted as distinct structures in the diagram. The study aims to discover and analyze the existence and stability of fixed points in the model. To achieve this, the center manifold theorem and bifurcation theory are employed to identify the requirements for pitchfork bifurcation, period-doubling bifurcation, and Neimark–Sacker bifurcation. In addition to theoretical findings, numerical simulations, including bifurcation diagrams, phase pictures, and maximum Lyapunov exponents, showcase the nuanced, complex, and diverse dynamics. Finally, the study applies the Ott–Grebogi–Yorke (OGY) method to control the chaos observed in the reduced modified Lorenz model. Full article

The current article focuses on the examination of nonlinear instability and dynamic transitions in a double-diffusive rotating couple-stress fluid layer. The analysis was based on the newly developed dynamic transition theory by T. Ma and S. Wang. Through a comprehensive linear spectrum analysis and investigation of the principle of exchange of stability (PES) as the thermal Rayleigh number crosses a threshold, the nonlinear orbital changes during the transition were rigorously elucidated utilizing reduction methods. For both single real and complex eigenvalue crossings, local pitch-fork and Hopf bifurcations were discovered, and directions of these bifurcations were identified along with transition types. Furthermore, nondimensional transition numbers that signify crucial factors during the transition were calculated and the orbital structures were illustrated. Numerical studies were performed to validate the theoretical results, revealing the relations between key parameters in the system and the types of transition. The findings indicated that the presence of couple stress and a slow diffusion rate of solvent and temperature led to smoother nonlinear transitions during convection. Full article

Inspired by the airway for phonation, fluid flow in an idealized model within a sudden expansion and contraction channel with a geometrically symmetric structure is investigated, and the nonlinear behaviors of the flow therein are explored via numerical simulations. Numerical simulation results show that, as the Reynolds number (Re = U₀H/ν) increases, the numerical solution undergoes a pitchfork bifurcation, an inverse pitchfork bifurcation and a Hopf bifurcation. There are symmetric solutions, asymmetric solutions and oscillatory solutions for flows. When the sudden expansion ratio (Er) = 6.00, aspect ratio (Ar) = 1.78 and Re ≤ Rec1 (≈185), the numerical solution is unique, symmetric and stable. When Rec1 < Re ≤ Rec2 (≈213), two stable asymmetric solutions and one symmetric unstable solution are reached. When Rec2 < Re ≤ Rec3 (≈355), the number of numerical solution returns one, which is stable and symmetric. When Re > Rec3, the numerical solution is oscillatory. With increasing Re, the numerical solution develops from periodic and multiple periodic solutions to chaos. The critical Reynolds numbers (Rec1, Rec2 and Rec3) and the maximum return velocity, at which reflux occurs in the channel, change significantly under conditions with different geometry. In this paper, the variation rules of Rec1, Rec2 and Rec3 are investigated, as well as the maximum return velocity with the sudden expansion ratio Er and the aspect ratio Ar. Full article