Search Results (181)

Single-molecular white circularly polarized luminescence emitters show promise for use in chiral displays and solid-state lighting, but their design remains challenging because broadband emission, exciton utilization, color balance, and chiroptical activity must be integrated within one molecule. Herein, we report a chiral single-molecular white emitter, DCz-PTZ, constructed through a π-interrupted strategy by combining a rigid spiro framework, an oxygen-bridged carbazole/cyanobenzene segment, and a phenothiazine donor. The interrupted conjugation suppresses excessive charge-transfer (CT) domination and enables dual emissive channels, including short-wavelength locally excited (LE) emission and long-wavelength CT emission. DCz-PTZ exhibits near-ideal white emission in dilute toluene solution with CIE coordinates of (0.33, 0.33), and maintains balanced dual emission in 5 wt% doped films with CIE coordinates of (0.32, 0.34). Photophysical studies support the assignment of the yellow emission to a thermally activated delayed fluorescence (TADF)-active CT state. The enantiomers show mirror-image circularly polarized signals with |g_lum| up to 2.9 × 10⁻³. Optimized white organic light-emitting diodes (WOLEDs) achieve color rendering index (CRI) up to 92 and a maximum external quantum efficiency (EQE_max) of 1.3%. This work demonstrates a π-interrupted molecular strategy for integrating dual emission, TADF exciton utilization, and circularly polarized electroluminescence (CPEL) in a single chiral emitter. Full article

Colorectal cancer is the third most commonly diagnosed cancer worldwide and the second leading cause of cancer-related deaths, while its resistance to treatment continues to represent a major therapeutic challenge. In the present study, a series of phenothiazine derivatives, including hybrids containing a 1,2,3-triazole linker and the zidovudine (AZT) fragment, were synthesized and evaluated for their anticancer activity against colorectal cancer cell lines HCT116 and HT-29 as well as non-cancerous BEAS-2B cells. Cytotoxic activity was determined using the Alamar Blue assay, while the mechanisms of action were investigated by flow cytometric analysis of apoptosis, cell cycle progression, and reactive oxygen species (ROS) generation. Additionally, changes in the expression of genes associated with apoptosis, oxidative stress, and DNA damage response were analyzed by RT-qPCR. The obtained results demonstrated that AZT-containing derivatives exhibited stronger anticancer activity than non-conjugated phenothiazine analogs. Compounds A9–A12 induced pronounced apoptosis and significant disturbances in cell cycle progression, particularly in HCT116 cells. Among the analyzed derivatives, compound A9 displayed the most favorable overall biological profile, combining strong proapoptotic and cytotoxic activity with relatively high selectivity toward cancer cells and moderate effects on non-cancerous cells. The results indicate that molecular hybridization of phenothiazine derivatives with the AZT scaffold represents a promising strategy for the development of novel anticancer agents targeting colorectal cancer. Full article

Photodynamic therapy (PDT) represents a promising non-antibiotic strategy for addressing bacterial and fungal infections, particularly in the context of increasing antimicrobial resistance and biofilm-associated disease. PDT is based on the light-induced activation of photosensitizers, leading to the generation of reactive oxygen species (ROS), including singlet oxygen (¹O₂), which induce oxidative damage to multiple microbial targets. Unlike conventional antimicrobial drugs that often act through specific molecular pathways, antimicrobial PDT produces simultaneous damage to membranes, proteins, nucleic acids, and extracellular biofilm components, thereby reducing the probability of resistance development. This review critically analyzes the cellular, biochemical, and biophysical determinants that govern PDT selectivity toward bacterial and fungal cells in comparison with mammalian host tissues. Particular attention is given to photosensitizer localization, membrane interactions, photobleaching, oxygen dependence, light penetration, and the balance between Type I and Type II photochemical mechanisms. The review provides a comparative overview of major molecular photosensitizer classes, including phenothiazines, porphyrins, chlorins, phthalocyanines, xanthene dyes, natural polyphenols, endogenous compounds, and advanced targeted photosensitizers. In addition, this review distinguishes molecular photosensitizers from nanotechnology-based platforms and delivery systems. Nanoparticles, polymeric carriers, hydrogels, and light-activated coatings are discussed not only as photosensitizer delivery tools, but also as systems that modulate aggregation, improve localization, enhance biofilm penetration, and enable surface-confined ROS generation. ROS are capable of causing phototoxic effects wherever they are located. Unless selectively accumulated by target organisms, there can be systemic phototoxicity. Overall, PDT should be regarded as a modular antimicrobial platform in which photosensitizer chemistry, formulation, light delivery, oxygen availability, and infection biology must be co-optimized. Although further studies are required to address clinical translation, regulatory complexity, material safety, and standardized treatment protocols, PDT offers a scientifically robust and clinically relevant approach that may complement conventional antibacterial and antifungal therapies, especially in localized, biofilm-associated, and device-related infections. Full article

In this study, a simple and efficient method for the synthesis of conjugates of N-acyl derivatives of 3,5-bis(benzylidene)-4-piperidones and phenothiazine was developed. The method was based on the acylation of 3,5-bis(benzylidene)-4-piperidones with chloroacetic acid chloride, followed by treatment of the product with sodium azide and an azide-alkyne [3+2] cycloaddition reaction between the resulting azide and 10-(prop-2-yn-1-yl)-10H-phenothiazine in the final step. Using this method, a series of seven compounds 23–29 were synthesized. The structure of synthesized compounds 23–29 was studied using ¹H, ¹³C, and ¹⁹F NMR spectroscopy and ESI-MS mass spectrometry. The cytotoxicity of compounds 23–29 and their hydrochloride salts 30–36 towards pancreatic adenocarcinoma Panc-1, bladder cancer T-24, glioblastoma T98G, breast adenocarcinoma BT-20, and normal dermal fibroblast DF-1 cells was studied using an MTT assay. Compound 29, containing 3,4,5-trimethoxyl radicals at the aromatic ring, and its hydrochloride salt 36, demonstrated the best cytotoxicity against Panc-1, T-24, T98G, and BT-20 cancer cells. Hydrochloride salts were found to exhibit superior cytotoxicity against Panc-1, T-24, T98G, and BT-20 cancer cells compared to the original 3,5-bis(benzylidene)-4-piperidones and free bases. Selective cytotoxic action against Panc-1, T-24, T98G, and BT-20 cancer cells compared to normal DF-1 cells was also observed for all the obtained compounds and their salts. Full article

Photovoltaic technologies represent an increasingly relevant alternative for developing renewable energy sources, particularly those based on light-harvesting materials such as perovskite solar cells (PSCs) and dye-sensitized solar cells (DSSCs), which have achieved efficiencies of 27.3% and 13.0%, respectively. In this context, phenothiazine (PTZ) has attracted considerable interest as a structural block due to its outstanding structural and photophysical properties, which also represent low production costs and reduced environmental impact. This review presents recent advances in the design and development of phenothiazine-based organic materials for photovoltaic applications, analyzing the main synthetic routes for obtaining this nucleus, as well as the fundamental aspects related to the operation of solar cells, including relevant device parameters. Furthermore, several studies focused on the synthesis, characterization, and performance of new phenothiazine-derived molecules used in photovoltaic devices are also examined. Finally, the most relevant conclusions are discussed, and future perspectives for the use of these materials in solar technologies are proposed. Full article

Organic redox-active molecules are promising catholyte materials for aqueous organic redox flow batteries (AORFBs), yet they often suffer from low solubility and poor cycling stability. Herein, we report a series of water-soluble phenothiazine derivatives functionalized with quaternary ammonium groups. The optimized compound, N,N,N-trimethyl-1-(10H-phenothiazin-10-yl) propan-2-aminium chloride (TMiPrPTCl), exhibits exceptional solubility (2.69 M in water) and a high redox potential (0.902 V vs. SHE). A comparative study of four derivatives reveals that side-chain length and branching critically modulate both solubility and degradation pathways: while three-carbon-linked analogs N,N,N-trimethyl-3-(10H-phenothiazin-10-yl)propan-1-aminium chloride (TMPrPTCl) degrade primarily via irreversible oxidation to sulfoxide, two-carbon-linked species (TMiPrPTCl) undergo additional side-chain cleavage, leading to rapid capacity fade. Although the quaternization strategy successfully achieves record solubility, the electrochemical stability remains a key challenge. Post-cycling analysis confirms the loss of redox activity and the formation of inert products. This work highlights the delicate balance between solubility enhancement and molecular stability, providing clear design guidelines for future phenothiazine-based catholytes. Full article

Single-molecule white-light emitters have attracted much attention due to their potential applications in white organic light-emitting diodes (WOLEDs). Their key advantage lies in the ability to use a simple device structure, akin to that of monochromatic OLEDs, to produce WOLEDs. This approach not only simplifies the fabrication process but also reduces costs, improves device stability, and provides a shortcut for the rapid commercialization of WOLEDs. In this study, two novel single-molecule white-light emitters, SRFR-1PTZ (10-(4′-(9H-9,9′-spirobi[fluoren]-2-yl)-4a,10a-dihydro-10H-phenothiazine) and SRFR-2PTZ (2,7-bis(4a,10a-dihydro-10H-phenothiazin-10-yl)-9,9′-spirobi[fluorene]), were designed and synthesized, and successfully implemented in WOLED devices. Comprehensive photophysical characterization revealed that both compounds exhibited dual-emission characteristics in dichloromethane solution, displaying simultaneous fluorescence and phosphorescence. Notably, thermally activated delayed fluorescence (TADF) was clearly observed for SRFR-1PTZ, whereas SRFR-2PTZ did not exhibit TADF behavior. Electroluminescence studies demonstrated that both SRFR-1PTZ and SRFR-2PTZ served as good color-stable cool-white-light emitters under driving voltages of 7–10 V. Full article

In conventional low-viscosity solvents, magnetic field effects (MFEs) in photoredox catalysis are often negligible because photogenerated radical ion pairs (RIPs) diffuse apart before significant spin evolution occurs. This study reports using ionic liquids (ILs) as a tunable homogeneous “solvent cage” to observe distinct low-field MFEs in the phenothiazine-mediated photoinduced reductive dechlorination of aryl chlorides. Experimental results demonstrate that MFEs increase significantly with bulk viscosity, reaching saturation at approximately 1000 Gs with a maximum enhancement of about 15%, consistent with the hyperfine coupling mechanism (HFCM). Femtosecond transient absorption spectroscopy (fs-TA) reveals that the ionic liquid environment effectively reduces the radical cage escape rate, matching it with the spin evolution rate. This allows the external magnetic field to intervene in the back electron transfer (BET) process. However, unlike strongly confined micellar systems, the contribution of the triplet charge recombination (TCR) pathway here is moderate, intrinsically limiting the magnetic enhancement amplitude. These findings establish that MFE magnitude is determined by both viscosity-controlled cage dynamics and the efficiency of the TCR channel, providing a mechanistic basis for designing spin-modulated homogeneous photoredox systems. Full article

Phenothiazine is a heteroaromatic molecule capable of various noncovalent interactions, including halogen bonding and π-stacked association. Despite its broad use in functional materials and pharmaceutical ingredients, a systematic comparison of these interaction modes has been lacking. Here, we report a combined experimental and computational study of intermolecular interactions of phenothiazine with a prototypical halogen-bond (HaB) donor (tetrabromomethane), planar π-electron acceptors (tetracyanopyrazine and tetrafluoro-p-benzoquinone), and multifunctional species capable of both interaction types (iodo- and bromo-3,5-dinitrobenzenes). X-ray structural analysis revealed that CBr₄ forms exclusively C–Br···π halogen bonds with the aromatic rings of phenothiazine, whereas all π-acceptors yield alternating donor–acceptor stacks characterized by multiple short contacts indicative of multicenter interactions. Notably, co-crystals of iodo- and bromodinitrobenzenes with phenothiazine display only π-stacked architectures. Density-functional calculations showed that isolated HaB complexes involving N, S, or π sites of phenothiazine possess comparable binding energies (≈−3 kcal mol⁻¹), whereas π-stacked complexes are substantially stronger (≈−9–12 kcal mol⁻¹). QTAIM, NCI, NBO, and energy-decomposition analyses indicated that while amounts of charge transfer in halogen-bonded and π-stacked complexes are comparable, the enhanced stability of the latter originates primarily from a large dispersion contribution. These results rationalize the solid-state preference for π-stacking over halogen bonding in systems where both motifs are accessible and clarify the hierarchy and physical origin of noncovalent interactions involving phenothiazine, providing guidance for the design of supramolecular assemblies and functional materials based on this versatile electron donor. Full article

Background: Phenothiazine derivatives bearing trifluoromethyl substituents have attracted increasing interest as multifunctional scaffolds in drug repositioning strategies, particularly in cancer and infectious diseases. Structural modification of classical phenothiazines by incorporation of a quinoline moiety has previously been shown to enhance biological activity. Objectives: The present study aimed to develop an efficient synthesis of 8-trifluoromethylquinobenzothiazines and to evaluate the anticancer and antibacterial potential of their N-substituted analogues inspired by triflupromazine, trifluoperazine, and fluphenazine. Methods: 6H-8-Trifluoromethylquinobenzothiazine was synthesized by cyclization of 2-amino-4-trifluoromethylbenzenethiol and 3-bromo-2-chloroquinoline. The resulting quinobenzothiazine, unsubstituted at the nitrogen atom, was subjected to N-alkylation reactions to afford eleven new 6-dialkylaminoalkyl derivatives. Structural elucidation was performed using NMR and HRMS techniques. Anticancer activity was evaluated by MTT assay against human breast (MDA-MB-231), pancreatic (Mia-PaCa-2), and lung (A-549) carcinoma cell lines, as well as normal HaCaT keratinocytes. Antibacterial activity was assessed by MIC/MBC determination against selected Gram-positive and Gram-negative reference strains and clinical isolates. Results: Among the synthesized compounds, derivatives 8 and 12 exhibited the most favorable anticancer profiles, showing micromolar cytotoxicity (IC₅₀ ≈ 4–10 µM) against lung and pancreatic cancer cells combined with moderate selectivity toward cancer cells over normal keratinocytes. Compound 6 displayed lower cytotoxic potency but a notably high selectivity index due to minimal toxicity toward normal cells. In antibacterial assays, compound 3 exhibited activity against Gram-positive bacteria, including a methicillin-resistant Staphylococcus aureus isolate, with MIC values ranging from 7.8 to 15.6 µg/mL. The corresponding MBC values were equal to or twofold higher than the MICs (MBC/MIC = 1–2), fulfilling commonly accepted criteria for bactericidal activity (MBC/MIC ≤ 4). OD-based growth kinetics confirmed concentration-dependent inhibition of S. aureus growth. Conclusions: The obtained results identify 8-trifluoromethylquinobenzothiazines as a promising class of multifunctional compounds. Selected derivatives combine anticancer activity with acceptable selectivity or display potent antibacterial effects against clinically relevant Gram-positive pathogens. Full article

Heterocyclic compounds have enormous pharmacological potential and therefore play a key role in the design of new drugs. Dipyridothiazines, both heterocyclic compounds and phenothiazine derivatives, exhibit promising anticancer, immunostimulatory, and antioxidant activities. The aim of this study was to design, synthesize, and evaluate the cytotoxicity of new 10-heteroaryl dipyridothiazines based on 2,7- and 3,6-diazaphenothiazine cores. The structural characterization of the new compounds was confirmed by spectroscopic methods. Cytotoxicity analysis was performed using the MTT assay against human keratinocytes (HaCaT) and two types of cancer cell lines: breast cancer (MDA-MB-231), lung carcer (A-549). The reference drugs used in the study were doxorubicin and cisplatin. The group of derivatives studied included active compounds as well as inactive derivatives. In order to explain differences in an activity level, molecular modelling supported by molecular dynamics was performed on histone deacetylase 6 (HDAC6), a known therapeutic target associated with oncogenic transformation and cancer metastasis. Molecular docking indicated that the derivative formed on the 2,7-diazaphenothiazine core is a more potent HDAC6 inhibitor, characterized by more stable binding and more favourable complex energy, despite minimal structural differences compared to the compound formed on the 3,6-diazaphenothiazine core. A preliminary SAR analysis was performed. Full article

The development of new photoinitiators for photocurable systems has gained increasing interest in response to regulatory and environmental requirements, including efficient absorption in the UV/Vis range and reduced toxicity. Among emerging light-sensitive compounds, oxime esters have attracted growing attention as efficient radical photoinitiators. In this paper, five series of oxime esters based on carbazole, coumarin, carbazole–coumarin, phenothiazine, and triphenylamine scaffolds were described. Their high performance in photopolymerization processes was presented, demonstrating their ability to act as both type I and type II photoinitiators, as confirmed by high monomer conversion degrees. These data highlight oxime esters as versatile photoinitiating systems and provide a basis for further structural optimization aimed at improving water solubility and enabling comprehensive cytotoxicity assessment. Full article

This review offers a focused overview of the strategies used to build and modify phenothiazine (PTZ) derivatives. It covers both classical synthetic approaches and advances reported since 2014, including transition metal-catalyzed transformations and greener techniques, such as electrosynthesis, microwave-assisted reactions, and ultrasound-promoted methods. Each strategy is evaluated with respect to efficiency, scalability, and sustainability. In parallel, the review surveys the diverse bioactivity profiles of PTZ derivatives, ranging from antipsychotic, anticancer, and antimicrobial activities to emerging applications in photodynamic therapy and neuroprotection. By correlating synthetic accessibility with biological potential, this review provides an integrated perspective that highlights advances achieved since 2014 and outlines future opportunities for rational PTZ design and applications. Full article

The aim of this work was to prepare new heterodimeric molecules containing pharmacophoric fragments of 3-cyanoquinoline/3-aminothieno[2,3-b]pyridine/3-aminothieno[2,3-b]quinoline on one side and phenothiazine on the other. The products were synthesized via selective S-alkylation of readily available 2-thioxo-3-cyanopyridines or -quinolines with N-(chloroacetyl)phenothiazines, followed by base-promoted Thorpe–Ziegler isomerization of the resulting N-[(3-cyanopyridin-2-ylthio)acetyl]phenothiazines. We found that both the S-alkylation and the Thorpe–Ziegler cyclization reactions, when conducted with KOH under heating, were accompanied to a significant extent by a side reaction involving the elimination of phenothiazine. Optimization of the conditions (0–5 °C, anhydrous N,N-dimethylacetamide and NaH or t-BuONa as non-nucleophilic bases) minimized the side reaction and increased the yields of the target heterodimers. The structures of the products were confirmed by IR spectroscopy, ¹H, and ¹³C DEPTQ NMR studies. It was demonstrated that the synthesized 3-aminothieno[2,3-b]pyridines can be acylated with chloroacetyl chloride in hot chloroform. The resulting chloroacetamide derivative reacts with potassium thiocyanate in DMF to form the corresponding 2-iminothiazolidin-4-one; in this process, phenothiazine elimination does not occur, and the Gruner–Gewald rearrangement product was not observed. The structural features and spectral characteristics of the synthesized 2-iminothiazolidin-4-one derivative were investigated by quantum chemical methods at the B3LYP-D4/def2-TZVP level. A range of drug-relevant properties was also evaluated using in silico methods, and ADMET parameters were calculated. A molecular docking study identified a number of potential protein targets for the new heterodimers, indicating the promise of these compounds for the development of novel antitumor agents. Full article