Search Results (178)

Aerostatic bearings were proven to be an optimal choice in situations where low friction, cleanliness, and high motion accuracy are required. Their functionality relies heavily on flow restrictors, which are responsible for regulating and controlling the supply flow, and consequently, the thickness and stiffness of the fluid film. A diverse range of restrictors with varying characteristics is used, among which are the porous restrictors. The current work introduces a novel solution involving a porous, highly compressible restrictor, whose element of novelty compared to its predecessors consists of its variable thickness and corresponding permeability, regulated by the load on the bearing. The gas is supplied through an annular, elastic, deformable, porous disc, which is compressed by a metal plate, subjected to compression by the recess pressure on one side and by the supply pressure on the other side. One or more springs are used in parallel with the porous disc to obtain the optimum elastic response. The objective of this study is to evaluate the performance characteristics and compare them to a conventional restrictor. A parametric analysis is performed to define the size and properties of the porous restrictor. Full article

In comparison to shallow coal seams, deep coal seams exhibit characteristics of high temperature, pressure, and in-situ stress, leading to significant differences in reservoir properties that constrain the effective development of deep coalbed methane (CBM). This study takes the Carboniferous deep 8# coal seam in the Yulin area of Ordos basin as the research subject. Based on the test results from core drilling wells, a comprehensive analysis of the characteristics and variation patterns of coal reservoir properties and a comparative analysis of the exploration and development potential of deep CBM are conducted, aiming to provide guidance for the development of deep CBM in the Ordos basin. The research results indicate that the coal seams are primarily composed of primary structure coal, with semi-bright to bright being the dominant macroscopic coal types. The maximum vitrinite reflectance (R_o,max) ranges between 1.99% and 2.24%, the organic is type III, and the high Vitrinite content provides a substantial material basis for the generation of CBM. Longitudinally, influenced by sedimentary environment and plant types, the lower part of the coal seam exhibits higher Vitrinite content and fixed carbon (FC_ad). The pore morphology is mainly characterized by wedge-shaped/parallel plate-shaped pores and open ventilation pores, with good connectivity, which is favorable for the storage and output of CBM. Micropores (<2 nm) have the highest volume proportion, showing an increasing trend with burial depth, and due to interlayer sliding and capillary condensation, the pore size (<2 nm) distribution follows an N shape. The full-scale pore heterogeneity (fractal dimension) gradually increases with increasing buried depth. Macroscopic fractures are mostly found in bright coal bands, while microscopic fractures are more developed in Vitrinite, showing a positive correlation between fracture density and Vitrinite content. The porosity and permeability conditions of reservoirs are comparable to the Daning–Jixian block, mostly constituting oversaturated gas reservoirs with a critical depth of 2400–2600 m and a high proportion of free gas, exhibiting promising development prospects, and the middle and upper coal seams are favorable intervals. In terms of resource conditions, preservation conditions, and reservoir alterability, the development potential of CBM from the Carboniferous deep 8# coal seam is comparable to the Linxing block but inferior to the Daning–Jixian block and Baijiahai uplift. Full article

Zebrafish are model organisms for drug screening owing to their transparent bodies, rapid embryonic development, and genetic similarities with humans. However, using standard polystyrene culture plates can limit the oxygen supply, potentially affecting embryo survival and the reliability of assays conducted in zebrafish. In this study, we evaluated the application of a novel, highly oxygen-permeable culture plate (InnoCell^TM) in zebrafish development and drug screening assays. Under both normal and oxygen-restricted conditions, zebrafish embryos cultured on InnoCell^TM plates exhibited significantly improved developmental parameters, including heart rate and body length, compared with those cultured on conventional polystyrene plates. The InnoCell^TM plate enabled a significant reduction in medium volume without compromising zebrafish embryo viability, thereby demonstrating its advantages, particularly in high-throughput 384-well formats. Drug screening tests using antiangiogenic receptor tyrosine kinase inhibitors (TKIs) revealed enhanced sensitivity and more pronounced biological effects in InnoCell^TM plates, as evidenced by the quantification of intersegmental blood vessels and gene expression analysis of the vascular endothelial growth factor receptor (vegfr, also known as kdrl). These results indicate that the InnoCell^TM highly oxygen-permeable plate markedly improves zebrafish-based drug screening efficiency and assay reliability, highlighting its potential for widespread application in biomedical research. Full article

The design of emulsions at the nanoscale is a significant application of nanotechnology. For spherical droplets and a given volume of dispersed phase, the nanometre size of droplets inversely increases the total area, $A={\displaystyle \frac{3V}{r}}$, allowing greater contact with organic and inorganic materials during application. In topical applications, not only is cell contact increased, but also permeability in the cell membrane. Nanoemulsions typically achieve kinetic stability rather than thermodynamic stability, so their commercial application requires reasonable resistance to flocculation and coalescence, which can be affected by temperature changes. Therefore, their thermoresponsive characterisation becomes relevant. In this work, we analyse this response in an O/W nanoemulsion of Palmarosa for antibacterial purposes that has already shown stability for one year at controlled room temperature. We now study hysteresis processes and the behaviour of the statistical distribution in droplet size by Dynamic Light Scattering, obtaining remarkable stability under temperature changes up to 50 °C. This includes a maintained chemical composition observed using Fourier Transform Infrared Spectroscopy and the preservation of antibacterial properties analysed through optical density tests on cultures and the Spread-Plate technique for bacteria colony counting. We obtain practically closed hysteresis curves for some tracers of droplet size distributions through controlled thermal cycles between 10 °C and 50 °C, exhibiting a non-linear behaviour in their distribution. In general, the results show notable physical, chemical, and antibacterial stability, suitable for commercial applications. Full article

Background: A key challenge in modern pharmaceutical research is developing predictive models for drug formulation behavior. Since permeability is closely linked to molecular properties, considering a broad of characteristics is essential for building reliable predictive tools. Near-infrared spectroscopy (NIR), a non-destructive, non-invasive, and chemically specific method, offers a powerful alternative to current gold-standard methods approved by regulatory agencies. Objectives: This study aims to apply a partial analytical quality by design (AQbD) approach to enhance the understanding and development of NIR and RP-HPLC methodologies. Methods: The employment of NIR with multivariate data analysis enabled the establishment of chemometric models for the classification and quantification of bifonazole (BFZ) in cream formulations. Results: An analytical target profile (ATP) was defined to guide the selection of critical method variables and support method design and development activities. Risk assessment was carried out using an Ishikawa diagram. For the RP-HPLC method, key performance parameters such as peak area, theoretical plates, tailing factor, and assay were evaluated, while NIR spectra and BFZ concentration were considered for method performance. The quantification models enabled the accurate determination of BFZ content, yielding results of 8.48 mg via NIR and 8.34 mg via RP-HPLC, with an RSD of 1.25%. Conclusions: These findings demonstrate the robustness and reliability of the models, making them suitable for routine quality control of BFZ formulations. Future research should aim to explore its use for monitoring permeation dynamics in real time and integrating it into regulatory frameworks to standardize its application in pharmaceutical quality control and formulation development. Full article

The increasing demand for safe, cost-effective, and sustainable energy storage solutions has spotlighted aqueous zinc-ion batteries (AZIBs) as promising alternatives to lithium-ion systems. However, the practical deployment of AZIBs remains hindered by dendritic growth, hydrogen evolution, and surface corrosion at the zinc metal anode, which severely compromise electrochemical stability. In this study, we propose an interfacial engineering strategy involving ultrathin diamond-like carbon (DLC) coatings applied to Zn anodes. The DLC films serve as conformal, ion-permeable barriers that mitigate parasitic side reactions and facilitate uniform Zn plating/stripping behavior. Materials characterizations of the DLC layer on the Zn anodes revealed the tunability of sp²/sp³ hybridization and surface morphology depending on DLC thickness. Electrochemical impedance spectroscopy demonstrated a significant reduction in interfacial resistance, particularly in the optimally coated sample (DLC2, ~20 nm), which achieved a favorable balance between mechanical integrity and ionic transport. Symmetric-cell tests confirmed enhanced cycling stability over 160 h, while full-cell configurations with an ammonium vanadate nanofiber-based cathode exhibited superior capacity retention over 900 cycles at 2 A g⁻¹. The DLC2-coated Zn anodes demonstrated the most effective performance, attributable to its moderate surface roughness, reduced disorder, and minimized charge-transfer resistance. These results provide insight into the importance of fine-tuning the DLC thickness and carbon bonding structure for suppressing dendrite formation and enhancing electrochemical stability. Full article

This study investigates the effects of anode and cathode inlet flow rates (ṁ) on the power performance of bipolar plates in a polymer electrolyte membrane fuel cell (PEMFC). The primary objective is to derive optimal flow rate conditions by comparatively analyzing concentration loss in the I−V curve and crossover phenomena at the anode, thereby establishing flow rates that prevent reactant depletion and water flooding. A single-cell computational model was constructed by assembling a commercial bipolar plate with a gas diffusion layer (GDL), catalyst layer (CL), and proton exchange membrane (PEM). The model simulates current density generated by electrochemical oxidation-reduction reactions. Hydrogen and oxygen were supplied at a 1:3 ratio under five proportional flow rate conditions: hydrogen (${\dot{m}}_{H_2}$ = 0.76–3.77 LPM) and oxygen (${\dot{m}}_{O_2}$ = 2.39–11.94 LPM). The Butler–Volmer equation was employed to model voltage drop due to overpotential, while numerical simulations incorporated contact resistivity, surface permeability, and porous media properties. Simulation results demonstrated a 24.40% increase in current density when raising ${\dot{m}}_{H_2}$ from 2.26 to 3.02 LPM and ${\dot{m}}_{O_2}$ from 7.17 to 9.56 LPM. Further increases to ${\dot{m}}_{H_2}$ = 3.77 LPM and ${\dot{m}}_{O_2}$ = 11.94 LPM yielded a 10.20% improvement, indicating that performance enhancements diminish beyond a critical threshold. Conversely, lower flow rates (${\dot{m}}_{H_2}$ = 0.76 and 1.5 LPM, ${\dot{m}}_{O_2}$ = 2.39 and 4.67 LPM) induced hydrogen-depleted regions, triggering crossover phenomena that exacerbated anode contamination and localized flooding. Full article

Transpiration cooling is an efficient thermal protection technology used for scramjet combustors and other components. However, a conventional transpiration cooling plate structure with uniform porous media distribution suffers from a large temperature difference between the upstream and downstream surfaces and high coolant injection pressure (p). To enhance the overall cooling effect and reduce the maximum surface temperature and coolant injection pressure, the combined particle diameter plate structure (CPD−PS) is proposed. Numerical simulations show that compared with the single-particle diameter plate structure (SPD−PS), the CPD−PS with a larger upstream particle diameter (d_p) than that of the downstream (d_pA > d_pB) can effectively reduce the upstream temperature and improve average cooling efficiency (η_ave). Meanwhile, gradually increasing d_p will increase the permeability of porous media, reduce coolant flow resistance, and thus lower coolant injection pressure. An optimization analysis of CPD−PS is conducted using response surface methodology (RSM), and the influence of design variables on the objective function (η_ave and p) is analyzed. Further optimization with the multi-objective genetic algorithm (MOGA) determines the optimal structural parameters. The results suggest that porosity (ε) and d_p are the most crucial parameters affecting η_ave and p of CPD−PS. After optimization, the maximum temperature of the porous plate is significantly reduced by 8.40%, and the average temperature of the hot end surface is also reduced. The overall cooling performance is effectively improved, η_ave is increased by 6.02%, and p is significantly reduced. Additionally, the upstream surface velocity of the optimized structure changes and the boundary layer thickens, which enhances the thermal insulation effect. Full article

In order to better understand the micropore structure of shale reservoir in Jiyang Depression, permeability damage test, low temperature nitrogen adsorption and scanning electron microscopy (SEM) were carried out on six cores in the target block. The adsorption isotherms were analyzed by Frenkel–Halsey–Hill (FHH) model, and the fractal dimensions of different layers were calculated. The results show that the shale pore system is mainly composed of organic nanopores, inorganic nanopores and micro-fractures. The inorganic pores are mainly distributed around or inside the mineral particles, while microcracks are commonly found between mineral particles or at the organic–mineral interface. Organic pores are located within or between organic particles. The results of nitrogen adsorption show that the shale pores are mainly H2/H3 hysteresis loops with wedge, plate or ink bottle shapes. The pore structure is highly complex, and the fractal dimension is high. The mean D1 fractal dimension, which represents pore surface roughness, is 2.3788, and the mean D2 fractal dimension, which represents pore structure complexity, is 2.7189. The fractal dimension is positively correlated with specific surface area and total pore volume and negatively correlated with average pore radius. The permeability damage rates of the N layer, B layer, and F layer are 17.39%, 20.2%, and 21.6%, respectively. The contact Angle of the core decreases with the increase in water skiing time. In this study, the micropore structure of different formations in Jiyang Depression is compared and analyzed, which provides valuable insights for the optimization and differentiated development of shale oil and gas resources. Full article

In this study, the methods of tangential magnetic field (TMF), magnetic Barkhausen noise (MBN), and incremental permeability (IP) were employed for in the simultaneous, quantitative prediction of target properties (bidirectional residual stress, surface hardness, and case depth) in the 45 steel plate. The bidirectional magnetic signals and target properties were measured experimentally. The results of Pearson correlation analyses revealed that most parameters of the MBN and IP signals are strongly correlated with both residual stress and surface hardness under the influence of multiple target properties. The multiple linear regression (MLR) model demonstrated highly accurate quantitative prediction of residual stress and hardness in the y-direction. However, the simultaneous prediction of residual stress and case depth in the x-direction proved less effective than expected. To address this limitation, an inversion method was developed based on the regression model with the single parameter as the dependent variable and the target properties as the independent variable. By incorporating known magnetic parameters and target properties, the model effectively determined the unknown target properties. After applying the method, the coefficient of determination (R²) for x-direction residual stress increased from 0.89 to 0.96 and the absolute error (AE) of case depth decreased from 0.10 mm to 0.04 mm for case depths below 0.15. Full article

Background: Candida auris is a significant global health concern, due to its rapid transmission, high mortality rate, and resistance to commonly available antifungal drugs. Methodology: During the current study, a cationic polymeric hydrogel was developed using chitosan (CS), polyethylene glycol (PEG), and methacrylic acid (MAA). The respective solutions were mixed in a volumetric ratio of 2:1:1. After characterization, the hydrogel was assessed using antifungal, antibiofilm, and hemocompatibility assays. Results: The hydrodynamic radius of 554.7 ± 90.1 nm and zeta potential of 15.6 ± 1.09 mV indicate the ideal size and charge for topical applications and in vivo studies, respectively. The formulation exhibited improved thermal stability, enhanced swelling, and a drug release profile for non-Fickian diffusion. The hydrogel effectively inhibited fungal growth in agar plates (42 ± 7.31 mm zone of inhibition), with a mean IC₅₀ of 15.17 ± 4.01 μg/mL and MIC of 29.30 ± 11.72 μg/mL. Calcofluor white (CFW) staining showed diffuse irregular yeast cells, suggesting increased membrane permeability, eventually leading to cell death. The hemocompatibility assay revealed no visible agglutination or hemolysis at the MIC value. The formulation exhibited significantly reduced biofilm formation compared to the growth control (p < 0.05). Additionally, in silico analysis revealed that MAA showed superior oral bioavailability, no inhibitory activity on cytochrome P450 enzymes, and low potential for toxicity through nuclear receptor signaling pathways. Conclusions: Cationic hydrogels show promise as potential antifungal treatments. The development of cost-effective and improved therapeutic methods is crucial to combat this deadly pathogen and to improve patient outcomes. Full article

Current in vitro methods for intestinal barrier assessment predominantly utilize two-dimensional (2D) membrane inserts in standard culture plates, which are widely recognized for their inability to replicate the microenvironment critical to intestinal barrier functionality. Our study focuses on creating an alternative method for intestinal barrier function by integrating a 3D-printed transwell device with a paper-based membrane. Caco-2 cells were grown on a Matrigel-modified paper membrane, in which the tight junction formation was evaluated using TEER measurements. Neutrophil-like dHL-60 cells were employed for neutrophil extracellular trap (NET) formation experiments. Furthermore, intestinal barrier dysfunction was demonstrated using NET-isolated and Staurosporine interventions. Intestinal barrier characteristics were investigated through immunofluorescence staining of specific proteins and scanning electron microscopy (SEM). Our paper-based intestinal barrier exhibited an increased resistance in a time-dependent manner, consistent with immunofluorescence images of Zonulin Occludens-1 (ZO-1) expression. Interestingly, immunofluorescence analysis revealed changes in the morphology of the intestinal barrier and the formation of surface villi. These disruptions were found to alter the localization of tight junctions, impacting epithelial polarization and surface functionality. Moreover, we successfully demonstrated the permeability of a paper-based intestinal barrier using FITC-dextran assay. Hence, the 3D-printed transwell device integrated with a paper membrane insert presents a straightforward, cost-effective, and sustainable platform for an in vitro cell model to evaluate intestinal barrier function. Full article

Industrialization trial production of high permeability (Hi-B) steel was carried out by “one cold rolled + decarburization and nitridation technologies”. The finished product reached the level of 23Q100 with an average grain size of 5.47 cm, magnetic flux density B₈ of 1.902T, and the iron loss P_1.7/50 of 0.975 W/Kg. The evolution law of the microstructure and texture under different processes was analyzed with the help of OM, EBSD, and XRD. The results showed that the microstructure of the hot rolled plate was equiaxed crystals in the surface layer, a mixture of recrystallization grains and banded fiber in the quarter of the thickness layer, and banded fiber in the center layer. The texture gradient of the hot rolled plate from the surface layer to the center layer was {112}<111> + {110}<114> → {441}<014> → {001}~{111}<110>. The texture of the normalized plate was in major {110}<113> in the surface layer, diffuse α-fiber texture and {441}<014> in the quarter of the thickness layer, and sharp α texture {001}~{111}<110> in the center layer. The texture of the cold-rolled sheet was concentrated in {001}~{332}<110>. The average grain size of the decarburizing and nitriding sheet was 26.4 μm, and the texture of the first recrystallization is sharp α*-fiber and weak {111}<112>. The finished product has a sharp single Goss texture. For Hi-B steel, the Goss secondary nucleus originated from the surface layer to 1/4 layer of the hot rolled plate and reached the highest content of 11.5% in the quarter of the thickness. The content of the Goss texture decreased with the subsequent normalization and cold rolling, then the Goss grains nucleated again during the decarburization annealing and high temperature annealing processes. Full article

Candida albicans is an opportunistic pathogenic yeast commonly found in the gastrointestinal tract of healthy humans. Under certain conditions, it can become invasive and cause life-threatening systemic infections. One mechanism used by C.albicans to breach the epithelial barrier is the secretion of candidalysin, a cytolytic peptide toxin. Candidalysin damages epithelial membranes and activates the innate immune response, making it key to C.albicans’ pathogenicity and a promising therapeutic target. Although candidalysin mediates C. albicans translocation through intestinal layers, its impact on epithelial responses is not fully understood. This study aims to characterize this response and develop scalable, quantitative methodologies to assess candidalysin’s toxicological effects using gut-on-chip models. We used the OrganoPlate^® platform to expose Caco-2 tubules to candidalysin and evaluated their response with trans-epithelial electrical resistance (TEER), protein detection, and immunostaining. We then validated our findings in a proof-of-concept experiment using human intestinal organoid tubules. Candidalysin impaired barrier integrity, induced actin remodeling, and increased cell permeability. It also induced the release of LDH, cytokines, and the antimicrobial peptide LL37, suggesting cellular damage, inflammation, and antimicrobial activity. This study strengthens our understanding of candidalysin’s role in C. albicans pathogenesis and suggests new therapeutic strategies targeting this toxin. Moreover, patient-derived organoids show promise for capturing patient heterogeneity and developing personalized treatments. Full article

Arnica montana (AM), which belongs to the daisy family Asteraceae, has a longstanding traditional use in Europe and North America for pain and inflammation treatment. This study investigates the inhibitory effects of ‘Arnica montana extract hydrogel patch (AHP)’ on Carrageenan-induced paw edema and hot plate-induced pain models. AHP exhibited transdermal permeability without the occurrence of issues like crystal precipitation. This study employed two animal model assessments using AHP, in comparison with Arnicare Gel (AG), to evaluate anti-inflammatory and pain relief effects. AHP treatment for 2 days showed a decrease in paw edema thickness in mice as compared to vehicle or AG groups; Carrageenan-induced swelling increased maximally at 1 h with the AHP group demonstrating a higher reduction. Thus, the AHP group exhibited a lower ratio of right/left paw thickness and a superior reduction in swelling, supportive of its ability to diminish edema. A histological analysis showed that AHP treatment reduced inflammatory cell infiltration. Consistently, the mRNA levels of inflammatory markers (tnfa, il1b, and il6) were decreased to a greater extent than the AG group. Particularly, tnfa inhibition was better in the AHP group, and the levels of il1b and il6 transcripts showed ~80% and 40% lower. Likewise, AHP reduced pain scores in a hot plate-induced rat model, although AG failed to do so. Together, these results demonstrate that AHP has long-lasting inhibitory effects on fluid effusion and edema formation, the production of inflammatory mediators, and pain-sensation, supporting its anti-inflammatory and pain-relieving pharmacological effects. Full article