Search Results (47)

This study presents a comprehensive analysis of the modifications in electronic structure and magnetism resulting from electronic excitation in pulsed laser-deposited Ba_0.7Sr_0.3Fe_xTi_(1−x)O₃ thin films, specifically for compositions with x = 0, 0.1, and 0.2. To investigate the effects of electronic energy loss (S_e) within the lattice, we performed 120 MeV Ag ion irradiation at varying fluences (1 × 10¹² ions/cm² and 5 × 10¹² ions/cm²) and compared the results with those of the pristine sample. The S_e induces lattice damage by generating ion tracks along its trajectory, which subsequently leads to a reduction in peak intensity observed in X-ray diffraction patterns. Atomic force microscopy micrographs indicate that irradiation resulted in a decrease in average grain height, accompanied by a more homogeneous grain distribution. X-ray photoelectron spectroscopy reveals a significant increase in oxygen vacancy (V_O) concentration as ion fluence increases. Ferromagnetism exhibits progressive deterioration with rising irradiation fluence. Due to the high S_e and multiple ion impact processes, cation interstitial defects are highly likely, which may overshadow the influence of V_O in inducing ferromagnetism, thereby contributing to an overall decline in magnetic properties. Furthermore, the elevated S_e potentially disrupts bound magnetic polarons, leading to a degradation of long-range ferromagnetism. Collectively, this investigation elucidates the electronic excitation-induced modulation of ferromagnetism, employing Fe impurity incorporation and irradiation techniques for precise defect engineering. Full article

We demonstrate tunable ferrimagnetic properties in both bulk and thin film ferrimagnetic DyCo₃ compatible with the hosting of topological magnetic chiral textures, namely skyrmions suitable for integration into spintronic applications with classic, neuromorphic and quantum functionalities. The bulk samples were prepared by arc-melting of stoichiometric mixtures under purified argon atmosphere and the thin films by Ultra-High-Vacuum magnetron sputtering from a stoichiometric target. Magnetometry allows us to extract the main magnetic properties of bulk and thin films: the saturation magnetization, the magnetic anisotropy and their variation with temperature. These results are successfully complemented by band structure ab initio DFT calculations. Based on the critical magnetic parameters extracted from experiments, we performed micromagnetic simulations that reveal the skyrmionic potential of our samples in both continuous thin film and nano-patterned architectures. Full article

Thin films of the superconductor YBa₂Cu₃O_7−δ (YBCO) were modified by low-energy light-ion irradiation employing collimated or focused He⁺ beams, and the long-term stability of irradiation-induced defects was investigated. For films irradiated with collimated beams, the resistance was measured in situ during and after irradiation and analyzed using a phenomenological model. The formation and stability of irradiation-induced defects are highly influenced by temperature. Thermal annealing experiments conducted in an Ar atmosphere at various temperatures demonstrated a decrease in resistivity and allowed us to determine diffusion coefficients and the activation energy $\Delta E=(0.31\pm 0.03)$ eV for diffusive oxygen rearrangement within the YBCO unit cell basal plane. Additionally, thin YBCO films, nanostructured by focused He⁺-beam irradiation into vortex pinning arrays, displayed significant commensurability effects in magnetic fields. Despite the strong modulation of defect densities in these pinning arrays, oxygen diffusion during room-temperature annealing over almost six years did not compromise the signatures of vortex matching, which remained precisely at their magnetic fields predicted by the pattern geometry. Moreover, the critical current increased substantially within the entire magnetic field range after long-term storage in dry air. These findings underscore the potential of ion irradiation in tailoring the superconducting properties of thin YBCO films. Full article

Patterned micro-scale thin-film magnetic structures, in conjunction with weak (~few tens of Oe) applied magnetic fields, can create energy landscapes capable of trapping and transporting fluid-borne magnetic microparticles. These energy landscapes arise from magnetic field magnitude variations that arise in the vicinity of the magnetic structures. In this study, we examine means of calculating magnetic fields in the local vicinity of permalloy (Ni_0.8Fe_0.2) microdisks in weak (~tens of Oe) external magnetic fields. To do this, we employ micromagnetic simulations and the resulting calculations of fields. Because field calculation from micromagnetic simulations is computationally time-intensive, we discuss a method for fitting simulated results to improve calculation speed. Resulting stray fields vary dramatically based on variations in micromagnetic simulations—vortex vs. non-vortex micromagnetic results—which can each appear despite identical simulation final conditions, resulting in field strengths that differ by about a factor of two. Full article

A non-invasive implementation of a planar magnetoresistive sensor on top of copper interconnected power modules is proposed. This solution allows for the real-time monitoring of the electrical current flowing across the power modules. Anisotropic magnetoresistive (AMR) sensors made of Permalloy were designed through finite-difference and finite-element simulations in the so-called barber-pole configuration and microfabricated via patterning by laser lithography and thin film deposition by electron-beam evaporation. Finally, the sensor performance was tested by measuring the magnetic field generated by the electrical current in a specific range of interest. Full article

In magnetic microelectromechanical systems (MEMSs), permanent magnets in the form of a thick film or thin plate are used for structural and manufacturing purposes. However, the geometric shape induces a strong self-demagnetization field during thickness–direction magnetization, limiting the surface magnetic flux density and output power. The magnets must be segmented or magnetized in a fine and multi-pole manner to weaken the self-demagnetization field. Few studies have been performed on fine multi-pole magnetization techniques that can generate a higher surface magnetic flux density than segmented magnets and are suitable for mass production. This paper proposes a batch fine multi-pole magnetic pattern transfer (MPT) method for the magnets of MEMS devices. The proposed method uses two master magnets with identical magnetic patterns to sandwich a target magnet. Subsequently, the coercivity of the target magnet is reduced via heating, and the master magnet’s magnetic pattern is transferred to the target magnet. Stripe, checkerboard, and concentric circle patterns with a pole pitch of 0.3 mm are magnetized on the NdFeB master magnets N38EH with high intrinsic coercivity via laser-assisted heating magnetization. The MPT yields the highest surface magnetic flux density at 160 °C, reaching 39.7–66.1% of the ideal magnetization pattern on the NdFeB target magnet N35. Full article

Our paper introduces a simulation-based framework designed to interpret differential phase contrast (DPC) magnetic imaging within the transmission electron microscope (TEM). We investigate patterned magnetic membranes, particularly focusing on nano-patterned Co₇₀Fe₃₀ thin-film membranes fabricated via focused ion beam (FIB) milling. Our direct magnetic imaging reveals regular magnetic domain patterns in these carefully prepared systems. Notably, the observed magnetic structure aligns precisely with micromagnetic simulations based on the dimensions of the underlying nanostructures. This agreement emphasizes the usefulness of micromagnetic simulations, not only for the interpretation of DPC data, but also for the prediction of possible microstructures in magnetic sensor systems with nano-patterns. Full article

This study investigated the effects of varying film thicknesses and annealing temperatures on the surface roughness and magnetic domain structure of CoFeSm thin films. The results revealed that as the film thickness increased, both the crystalline size and surface roughness decreased, leading to a reduction in coercivity (H_c) and improved magnetic contrast performance. Energy-dispersive X-ray spectroscopy (EDS) analysis confirmed the presence of cobalt (Co), iron (Fe), and samarium (Sm) within the thin films. Notably, the 40 nm Co₄₀Fe₄₀Sm₂₀ thin film annealed at 200 °C exhibited lower sheet resistance (R_s) and resistivity (ρ), indicating higher conductivity and a relatively higher maximum magnetic susceptibility (χ_ac) at 50 Hz. These findings suggest that these films are well suited for low-frequency magnetic components due to their increased spin sensitivity. The 40 nm Co₄₀Fe₄₀Sm₂₀ thin film, subjected to annealing at 200 °C, displayed a distinct stripe domain structure characterized by prominently contrasting dark and bright patterns. It exhibited the lowest H_c and the highest saturation magnetization (M_s), leading to a significant improvement in their soft magnetic properties. It is proposed that the surface roughness of the CoFeSm thin films plays a crucial role in shaping the magnetic properties of these thin magnetic films. Full article

Multiferroic materials capable of robust magnetoelectric coupling at room temperature are currently being explored for their possible multifunctional device applications. Highly (100)-oriented Pb(Fe_0.5Ta_0.5)_x(Zr_0.53Ti_0.47)_1−x (PZTFT_x) thin films (x = 0.2 and 0.3) with a thickness of about 300 nm were grown on La_0.67Sr_0.33CoO₃ (LSCO)-buffered MgO 100-oriented substrates via the pulsed laser deposition method. An analysis of their X-ray diffraction patterns suggests the stabilization of the orthorhombic phase in the thin films at room temperature. Dielectric spectroscopic measurements of the metal–insulator–metal (Pt/PZTFT_x/LSCO) thin-film capacitors as a function of temperature revealed a diffuse ferroelectric-to-paraelectric phase transition around Tm ~520 and 560 K for the x = 0.2 and 0.3 thin films, respectively. Well-saturated electrical hysteresis loops with large remanent (Pr) and saturation (Ps) polarizations were observed in these capacitors, which indicates the establishment of intrinsic ferroelectric ordering in the thin films at room temperature. These thin films retained ferromagnetic/ferrimagnetic ordering up to 300 K and showed saturation magnetization values of 8.3 (x = 0.2) and 6.1 (x = 0.3) emu/cm³ at room temperature. The magnetoelectric coupling constants of 2040 mV/cmOe (x = 0.2) and 850 mV/cmOe (x = 0.3), respectively, were obtained at an in-plane bias field at room temperature. The present study demonstrates that PZTFT_x thin films are multiferroic at room temperature with large magnetoelectric couplings, and these materials may be suitable for use in magnetic sensors and spintronic device applications. Full article

In this first volume, we cover relevant aspects of chemical and physical processes of the production and characterization of magnetic materials in bulk, thin films, nanostructures, and/or nanocomposites, as well as modeling aspects involving such structures. Accordingly, this volume presents eleven original research and review works on the challenges and trends covering fundamental and experimental work, with a special focus on the design, synthesis, and characterization of various types of magnetic materials, and the study of their structure–property relationships. State-of-the-art results on the development of new experimental concepts, leading to the transfer, chemical transformation, and high-resolution patterning of advanced thin films and nanomaterials, and to the design and fabrication of devices, are also presented and discussed. Full article

Over recent decades, the scientific community has managed to make great progress in the theoretical investigation and practical characterization of bismuth ferrite thin films. However, there is still much work to be completed in the field of magnetic property analysis. Under a normal operational temperature, the ferroelectric properties of bismuth ferrite could overcome the magnetic properties due to the robustness of ferroelectric alignment. Therefore, investigation of the ferroelectric domain structure is crucial for functionality of any potential devices. This paper reports deposition and analyzation of bismuth ferrite thin films by Piezoresponse Force Microscopy (PFM) and XPS methods, aiming to provide a characterization of deposited thin films. In this paper, thin films of 100 nm thick bismuth ferrite material were prepared by pulsed laser deposition on multilayer substrates Pt/Ti(TiO₂)/Si. Our main purpose for the PFM investigation in this paper is to determine which magnetic pattern will be observed on Pt/Ti/Si and Pt/TiO₂/Si multilayer substrates under certain deposition parameters by utilizing the PLD method and using samples of a deposited thickness of 100 nm. It was also important to determine how strong the measured piezoelectric response will be, considering parameters mentioned previously. By establishing a clear understanding of how prepared thin films react on various biases, we have provided a foundation for future research involving the formation of piezoelectric grains, thickness-dependent domain wall formations, and the effect of the substrate topology on the magnetic properties of bismuth ferrite films. Full article

Fe-Ni-based nanocrystalline coatings with unique magnetic properties are widely used as soft magnetic materials and usually act as the core component in electronic devices. Nanocrystallized particles and thin films have become a popular contemporary research direction. Electrical explosion, characterized by an ultrafast atomization and quenching rate (dT/dt ~ 10⁹–10¹¹ K/s) for the material, is a unique approach for the rapid “single-step” synthesis of nanomaterials and coatings. In this study, experiments were carried out with intertwined wire under a directional spraying device in atmospheric Ar ambience. Two load systems of Fe-Ni and Fe-Ni-Co were considered in this work. Electrical parameters and high-speed camera images were obtained to reveal the physical mechanism and dynamic process of explosive spraying. The morphologic and crystallographic results were characterized by SEM and XRD. The magnetic properties were measured via VSM equipment, and the parameters of saturation magnetization M_s, residual magnetization M_r, and coercivity H_c were emphasized in the hysteresis loop pattern. The experimental results indicate that a dense coating was prepared with extremely low porosity, and the morphology of the coating surface shows different regions characterized by solidified chunks and loose particles. XRD patterns showed that crystalline structures were discrepant under two load systems with different Ni weight proportions. Magnetic measurements gave a thin and narrow hysteresis loop, which represents loops with good soft magnetic properties. Quantitatively, coercivity H_c decreased from 59.3 to 52.6 and from 121.0 to 49.9 for the coatings not containing and containing Co under parallel and perpendicular fields, respectively. Full article

The connection of multidisciplinary and versatile techniques capable of depositing and modeling thin films in multistep complex fabrication processes offers different perspectives and additional degrees of freedom in the realization of patterned magnetic materials whose peculiar physical properties meet the specific needs of several applications. In this work, a fast and cost-effective dealloying process is combined with a fast, low-cost, scalable electroless deposition technique to realize hybrid magnetic heterostructures. The gold nanoporous surface obtained by the dealloying of an Au₄₀Si₂₀Cu₂₈Ag₇Pd₅ ribbon is used as a nanostructured substrate for the electrodeposition of cobalt. In the first steps of the deposition, the Co atoms fill the gold pores and arrange themselves into a patterned thin film with harder magnetic properties; then they continue their growth into an upper layer with softer magnetic properties. The structural characterization of the hybrid magnetic heterostructures is performed using an X-ray diffraction technique and energy-dispersive X-ray spectroscopy, while the morphology of the samples as a function of the electrodeposition time is characterized by images taken in top and cross-section view using scanning electron microscopy. Then, the structural and morphologic features are correlated with the room-temperature magnetic properties deduced from an alternating-gradient magnetometer’s measurements of the hysteresis loop and first order reversal curves. Full article

Single-cell analysis is an emerging discipline that has shown a transformative impact in cell biology in the last decade. Progress in this field requires systems capable of accurately moving the cells and particles in a controlled manner. Here, we present a microfluidic platform equipped with C-shaped magnetic thin films to precisely transport magnetic particles in a tri-axial rotating magnetic field. This innovative system, compared to the other rivals, offers numerous advantages. The magnetic particles repel each other to prevent undesired cluster formation. Many particles move synced with the external rotating magnetic field, which results in highly parallel controlled particle transport. We show that the particle transport in this system is analogous to electron transport and Ohm’s law in electrical circuits. The proposed magnetic transport pattern is carefully studied using both simulations and experiments for various parameters, including the magnetic field characteristics, particle size, and gap size in the design. We demonstrate the appropriate transport of both magnetic beads and magnetized living cells. We also show a pilot mRNA-capturing experiment with barcode-carrying magnetic beads. The introduced chip offers fundamental potential applications in the fields of single-cell biology and bioengineering. Full article

The magnetic stray field is an unavoidable consequence of magnetic multilayers, which may have a significant influence on the performance of spintronic devices. Based on Maxwell’s magnetostatics theory, here we numerically calculated the distributions of magnetic stray fields and self-demagnetizing fields in a series of patterned multilayer thin-film structures with either an in-plane or a perpendicularly magnetized ferromagnetic layer. The stray field above the ferromagnetic layer is inhomogeneous, showing the dramatic changes near the sample edge, but the uniformity in the center region could be improved with the increasing sample size. The stray field strength tends to zero for large samples, increases with the increase in the hard-layer thickness, and decreases with the increase in the distance D away from the ferromagnetic layer. In the multilayer samples, the separately simulated stray field and self-demagnetizing field within the soft layer agree well with the classic magnetostatic relationship of $B={\mu }_0\left(H_d+M\right)$. For the in-plane magnetized trilayer sample, the magnetic-flux density within the soft ferromagnetic layer slightly decreases in the antiparallel magnetization alignment and increases in the parallel alignment state with the increase in the intermediate non-magnetic-layer thickness. In contrast, for the sample with the perpendicular magnetization, the magnetic-flux density decreases as the non-magnetic layer is thickened for both the antiparallel and parallel state. This study may provide a theoretical basis for the design of thin-film spintronic devices. Full article