Search Results (315)

Tunnel construction poses significant safety challenges due to confined spaces, limited visibility, and the dynamic movement of labourers and machinery. This study addresses a critical gap in real-time, bidirectional proximity monitoring by developing and validating a prototype early-warning system that integrates real-time location systems (RTLS) with long-range (LoRa) wireless communication and ultra-wideband (UWB) positioning. The system comprises Arduino nano microcontrollers, organic light-emitting diode (OLED) displays, and piezo buzzers to detect and signal proximity breaches between workers and equipment. Using an action research approach, three pilot case studies were conducted in a simulated tunnel environment to test the system’s effectiveness in both static and dynamic risk scenarios. The results showed that the system accurately tracked proximity and generated timely alerts when safety thresholds were crossed, although minor delays of 5–8 s and slight positional inaccuracies were noted. These findings confirm the system’s capacity to enhance situational awareness and reduce reliance on manual safety protocols. The study contributes to the tunnel safety literature by demonstrating the feasibility of low-cost, real-time monitoring solutions that simultaneously track labour and machinery. The proposed RTLS framework offers practical value for safety managers and informs future research into automated safety systems in complex construction environments. Full article

The fabrication of high-performance organic optoelectronic devices using solution-based techniques, in particular inkjet printing, is both a desirable and challenging goal. Organic light-emitting diodes (OLEDs) are multilayer devices that have demonstrated great potential in display applications, with ongoing efforts aimed at extending their use to the lighting sector. A key objective in this context is the reduction in production costs, for which printing techniques offer a promising pathway. The main obstacle to fully printed OLEDs lies in the difficulty of depositing new layers onto pre-existing ones while maintaining high film quality and avoiding damage to the underlying layers. In a bottom-emitting OLED, the electron transport layer (ETL) is the final organic layer to be deposited, making its printing particularly challenging, a process for which only a few successful examples have been reported. In this work, we report on the optimization of a 2,2′,2″-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi)-based ink formulation for ETL printing on an emitting layer composed of 5,10-Bis(4-(3,6-di-tert-butyl-9H-carbazol-9-yl)-2,6-dimethylphenyl)-5,10-dihydroboranthrene (tBuCzDBA). A specific ratio of methanol to diethyl ether was identified as the most suitable for printing the ETL without compromising the integrity of the underlying layer. The printed ETL was successfully integrated into an OLED device, which exhibited a maximum current efficiency of 6.8 cd/A and a peak luminance of about 8700 cd/m². These results represent a significant step toward the development of a fully printed OLED architecture. Full article

The application of organic light-emitting diodes (OLEDs) has become widespread, with polarizers commonly employed to mitigate the influence of external light sources on OLED displays. However, when the light signal generated by the OLED emissive layer passes through the polarizer, approximately 50% of the light energy is inevitably lost. Circularly polarized luminescent (CPL) molecules, capable of emitting specific left- or right-handed circularly polarized light, theoretically enable 100% light energy utilization in corresponding OLED devices (CP-OLEDs). With this breakthrough, CPL mechanisms exhibit significant potential for applications in data storage, bioimaging, and 3D displays. In this review, we focus on molecules constructed via a chiral perturbation strategy, analyzing their CPL generation mechanisms and molecular engineering principles. The relationship between these molecular structures and OLED performance is systematically analyzed and summarized. Finally, we critically address current challenges in developing both CPL active materials and devices based on the chiral perturbation strategies, while providing perspectives on future developments and potential challenges in this field. Full article

A tetradentate Pt(II) complex with a 5/6/6 structural backbone, Pt(PhPiPy-O-PytmCz), was synthesized by incorporating two distinct cycloalkyl groups. These structural modifications significantly enhanced the photoluminescence quantum yield and effectively increased the distance between molecules, thereby mitigating undesirable intermolecular interactions and triplet-state quenching. This strategic molecular design resulted in an external quantum efficiency of 11.5% at a wavelength of 539 nm and significantly enhanced operational lifetimes in green phosphorescent organic light-emitting diodes (OLEDs). These findings are expected to inspire the development of new green luminescent materials and innovative strategies in OLED technology. Full article

Recent advancements in thermally activated delayed fluorescence (TADF) materials and mechanochromic materials have significantly enhanced the efficiency and versatility of light-emitting electrochemical cells (LECs) and organic light-emitting diodes (OLEDs). TADF materials have enabled efficiency improvements, achieving an internal quantum efficiency (IQE) of nearly 100% by utilizing both singlet and triplet excitons. Meanwhile, mechanochromic materials exhibit reversible optical changes upon mechanical stimuli, making them promising for stress sensing, encryption, and flexible electronics. The synergistic integration of TADF and mechanochromic materials in OLEDs and LECs has led to enhanced efficiency, stability, and multifunctionality in next-generation lighting and display technologies. This narrative review explores recent breakthroughs in devices that incorporate both TADF and mechanochromic materials as emitters. Particular attention is given to the molecular design that enable both TADF and mechanochromic properties, as well as optimal device structures and performance parameters. Moreover, this review discusses the only LEC fabricated so far using a TADF-mechanochromic emitter, highlighting its performance and potential. Finally, the report concludes with an outlook on the future commercial applications of these materials, particularly in wearable electronics and smart display technologies. Full article

A zinc complex bearing a pyrazolone-based azomethine ligand has been synthesized for blue-emitting organic light-emitting diodes (OLEDs). The azomethine ligand H₂L and the complex [ZnL·H₂O] were characterized by IR, 1H NMR, XRD, and TGA/DSC techniques. According to a single-crystal X-ray diffraction analysis, the complex [ZnL·H₂O] has a molecular structure. Its solid-state PL maxima appear to be at 416 nm and emit moderate blue emission with a quantum yield (QY) of 2%, with a dehydrated form of the complex showing greater efficiency with a QY of 55.5%. ZnL-based electroluminescent devices for OLED applications were fabricated. The devices exhibit blue emission with brightness up to 5300 Cd/A. Full article

Two blue fluorescent dopants were designed and successfully synthesized, 5-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho [3,2,1-de]anthracen-7-yl)-5H-benzo[b]carbazole (TDBA-Bz) and 9-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracen-7-yl)-9H-carbazole (TDBA-Cz). Both in solution and the film state, the two emitters demonstrated deep-blue luminescence characteristics. In solution-processed organic light-emitting diodes (OLEDs), TDBA-Bz and TDBA-Cz used as dopant materials showed electroluminescence peaks at 436 nm and 413 nm, respectively. The corresponding CIE color coordinates were determined to be (0.181, 0.114) for TDBA-Bz and (0.167, 0.086) for TDBA-Cz. The solution-processed device using TDBA-Cz as a dopant exhibited a current efficiency (CE) of 7.25 cd/A and an external quantum efficiency (EQE) of 6.45%, demonstrating higher efficiencies compared to the device with TDBA-Bz. In particular, at a luminance of 2000 cd/m², TDBA-Cz maintained an EQE of 4.81%, with only a slight decrease from its maximum EQE. Full article

The advancement of portable high-definition organic light-emitting diode (OLED) displays necessitates thin film transistors (TFTs) with low power consumption and high pixel density. Amorphous indium gallium zinc oxide (a-IGZO) TFTs are promising candidates to meet these requirements. However, conventional silicon dioxide gate insulators provide limited channel modulation due to their low dielectric constant, while alternative high-k dielectrics often suffer from high leakage currents and poor surface quality. Plasma-enhanced atomic layer deposition (PEALD) enables the atomic-level control of film thickness, resulting in high-quality films with superior conformality and uniformity. In this work, a systematic investigation was conducted on the properties of HfO₂ films and the electrical characteristics of a-IGZO TFTs with different HfO₂ thicknesses. A Vth of −0.9 V, μ_sat of 6.76 cm²/Vs, SS of 0.084 V/decade, and I_on/I_off of 1.35 × 10⁹ are obtained for IGZO TFTs with 40 nm HfO₂. It is believed that the IGZO TFTs based on a HfO₂ gate insulating layer and prepared by PEALD can improve electrical performance. Full article

We report the molecular design and synthesis of a novel selenium-containing multi-resonance thermally activated delayed fluorescence (MR-TADF) host material, 3,6-di-tert-butyl-9,16-dioxa-15-selena-4b-boraindeno[2,1-a]naphtho[3,2,1-de]anthracene (TDBA-SePh), for green and red phosphorescent organic light-emitting diodes (PhOLEDs). By incorporating selenium into the DOBNA-based MR-TADF backbone, the reverse intersystem crossing (RISC) process was effectively activated, leading to enhanced utilization of triplet excitons. The corresponding RISC rate was determined to be 3.91 × 10⁴ s⁻¹. When applied to PhOLED devices, TDBA-SePh-based green and red OLEDs exhibited higher external quantum efficiency (EQE) and reduced efficiency roll-off compared to conventional mCP-based host materials. At a luminance of 1000 cd m⁻², the green and red devices exhibited roll-off values of 2.5% and 4.3%, respectively. This improvement is attributed to the incorporation of selenium as a heteroatom, which accelerates the RISC process, thereby suppressing triplet-triplet annihilation (TTA). These results suggest that adopting a similar molecular design strategy can not only reduce efficiency roll-off but also enhance device efficiency and operational stability, offering significant potential for future OLED applications. Full article

Pixel circuits are key components of flat panel displays, including liquid crystal displays (LCDs), organic light-emitting diode displays (OLEDs), and micro light-emitting diode displays (micro-LEDs). Depending on the active layer material of the thin film transistor (TFT), pixel circuits are categorised into amorphous silicon (a-Si) technology, low-temperature polycrystalline silicon (LTPS) technology, metal oxide (MO) technology, and low-temperature polycrystalline silicon and oxide (LTPO) technology. In this review, we outline the fundamental display principles and four major TFT technologies, covering conventional single-gated TFTs to novel two-gated TFTs. We focus on novel pixel circuits for three glass-based display technologies with additional mention of pixel circuits for silicon-based OLED and silicon-based micro-LED. Full article

Blue exciplexes, a critical innovative component in organic light-emitting diodes (OLEDs) technology, exhibit substantial potential for enhancing device efficiency, reducing driving voltage, and simplifying structural designs. This article reviews the pivotal role of blue exciplexes in OLEDs, analyzing their unique advantages and challenges as emitters and host materials. Through optimized molecular design, blue exciplexes achieve high color purity and emission efficiency, surpassing conventional fluorescent materials. Additionally, their wide energy bands and high triplet energy provide opportunities to improve the performance of sky-blue, deep-blue, and white OLEDs. However, limitations in deep-blue efficiency, material degradation due to high-energy excitons, and spectral red-shift pose significant challenges to their development. This review offers a comprehensive perspective and research reference on the photophysical mechanisms of blue exciplexes and their applications in display and lighting fields. Full article

Optical techniques to study neuronal activity have greatly advanced the field of neuroscience over recent decades. Multichannel silicon-based recording probes combined with optical fibers allow for simultaneous recording and manipulation of neuronal activity that underpins cognitive processes and behavior. The recent development of neural probes incorporating organic light-emitting diodes (OLEDs) and photodiode-based organic photodetectors (OPDs) offer additional advantages of biocompatibility, ultra-small footprint, multifunctionality, and low cost. These developments are ushering in a new generation of devices that are ideal for the interrogation of neuronal activity in vitro and in vivo. In this review, we discuss recent progress in OLED- and OPD-based neural probes, their applications in the optical control of neuronal function, and current challenges and prospects for the future. Full article

Europium(III) β-diketone and organic carboxylic acid complexes are designable, easy to prepare, and easy to modify and have excellent fluorescence properties (narrow emission spectral band, high colour purity, long fluorescence lifetime, high quantum yield, and a spectral emission range covering both the visible and near-infrared regions). These complexes play important roles in popular fields such as laser and fibre-optic communications, medical diagnostics, immunoassays, fluorescent lasers, sensors, anticounterfeiting, and organic light-emitting diodes (OLEDs). In the field of light-emitting materials, europium complexes are especially widely used in OLED lamps, especially because of their high-efficiency emission of red (among the three primary colours); accordingly, these complexes can be mixed with blue and green phosphors to obtain high-efficiency white phosphors that can be excited by near-ultraviolet light. This paper reviews the red-light-emitting europium complexes with β-diketone and organic carboxylic acid as ligands that have been studied over the last five years, describes the current problems, and discusses their future application prospects. Full article

Photodynamic therapy (PDT) is an innovative and non-invasive approach to treating apparent tumours with minimal toxicity. PDT has a long-standing application in antitumor treatment utilizing various photosensitizers (PSs) for different tumours. Historically, light has served as a therapeutic tool in many diseases. PDT involves a dual treatment process in which light energy and PSs are combined to ablate tumour cells following light activation. In general, PDT exhibits reduced side effects and toxicity compared to chemotherapy and radiotherapy, as it spares the extracellular matrix, facilitating excellent tissue healing and minimizing scarring. In addition, PSs can serve in diagnostic roles in tumour identification, termed photodynamic diagnosis (PDD). Advancements in flexible light sources that produce uniform illumination could significantly enhance the consistency of light delivery. This review outlines the clinical applications of OLEDs in PDT for cancer, addressing both diagnostic and therapeutic methods. Furthermore, we will explore various tumour cases using PDT with OLEDs. In particular, antimicrobial PDT targets antibiotic-resistant strains in diabetic foot ulcers, while metronomic PDT promotes cancer cell apoptosis through prolonged, low-intensity light exposure. Our emphasis is on PDT employing organic light-emitting diodes (OLEDs). Furthermore, the combination of PDT with NIR-OLEDs is examined for its potential to enhance tumour-targeting effectiveness, possibly exceeding the results of standalone treatments. Full article

The removal of surface residues from single-layer graphene (SLG), including poly(methyl methacrylate) (PMMA) polymers and Cl⁻ ions, during the transfer process remains a significant challenge with regard to preserving the intrinsic properties of SLG, with the process often leading to unintended doping and reduced electronic performance capabilities. This study presents a rapid and efficient surface treatment method that relies on an aqueous sodium nitrite (NaNO₂) solution to remove such contaminants effectively. The NaNO₂ solution rinse leverages reactive nitric oxide (NO) species to neutralize ionic contaminants (e.g., Cl⁻) and partially oxidize polymer residues in less than 10 min, thereby facilitating a more thorough final cleaning while preserving the intrinsic properties of graphene. Characterization techniques, including atomic force microscopy (AFM), Kelvin probe force microscopy (KPFM), and X-ray photoelectron spectroscopy (XPS), demonstrated substantial reductions in the levels of surface residues. The treatment restored the work function of the SLG to approximately 4.79 eV, close to that of pristine graphene (~4.5–4.8 eV), compared to the value of nearly 5.09 eV for conventional SLG samples treated with deionized (DI) water. Raman spectroscopy confirmed the reduced doping effects and improved structural integrity of the rinsed SLG. This effective rinsing process enhances the reproducibility and performance of SLG, enabling its integration into advanced electronic devices such as organic light-emitting diodes (OLEDs), photovoltaic (PV) cells, and transistors. Furthermore, the technique is broadly applicable to other two-dimensional (2D) materials, paving the way for next-generation (opto)electronic technologies. Full article