Search Results (45)

Titanium dioxide (TiO₂) is a wide-bandgap semiconductor material with broad application potential, known for its excellent photocatalytic performance, high chemical stability, low cost, and non-toxicity. These properties make it highly attractive for applications in photovoltaic energy, environmental remediation, and optoelectronic devices. For instance, TiO₂ is widely used as a photocatalyst for hydrogen production via water splitting and for degrading organic pollutants, thanks to its efficient photo-generated electron–hole separation. Additionally, TiO₂ exhibits remarkable performance in dye-sensitized solar cells and photodetectors, providing critical support for advancements in green energy and photoelectric conversion technologies. Boron-doped diamond (BDD) is renowned for its exceptional electrical conductivity, high hardness, wide electrochemical window, and outstanding chemical inertness. These unique characteristics enable its extensive use in fields such as electrochemical analysis, electrocatalysis, sensors, and biomedicine. For example, BDD electrodes exhibit high sensitivity and stability in detecting trace chemicals and pollutants, while also demonstrating excellent performance in electrocatalytic water splitting and industrial wastewater treatment. Its chemical stability and biocompatibility make it an ideal material for biosensors and implantable devices. Research indicates that the combination of TiO₂ nanostructures and BDD into heterostructures can exhibit unexpected optical and electrical performance and transport behavior, opening up new possibilities for photoluminescence and rectifier diode devices. However, applications based on this heterostructure still face challenges, particularly in terms of photodetector, photoelectric emitter, optical modulator, and optical fiber devices under high-temperature conditions. This article explores the potential and prospects of their combined heterostructures in the field of optoelectronic devices such as photodetector, light emitting diode (LED), memory, field effect transistor (FET) and sensing. TiO₂/BDD heterojunction can enhance photoresponsivity and extend the spectral detection range which enables stability in high-temperature and harsh environments due to BDD’s thermal conductivity. This article proposes future research directions and prospects to facilitate the development of TiO₂ nanostructured materials and BDD-based heterostructures, providing a foundation for enhancing photoresponsivity and extending the spectral detection range enables stability in high-temperature and high-frequency optoelectronic devices field. Further research and exploration of optoelectronic devices based on TiO₂-BDD heterostructures hold significant importance, offering new breakthroughs and innovations for the future development of optoelectronic technology. Full article

We report the molecular design and synthesis of a novel selenium-containing multi-resonance thermally activated delayed fluorescence (MR-TADF) host material, 3,6-di-tert-butyl-9,16-dioxa-15-selena-4b-boraindeno[2,1-a]naphtho[3,2,1-de]anthracene (TDBA-SePh), for green and red phosphorescent organic light-emitting diodes (PhOLEDs). By incorporating selenium into the DOBNA-based MR-TADF backbone, the reverse intersystem crossing (RISC) process was effectively activated, leading to enhanced utilization of triplet excitons. The corresponding RISC rate was determined to be 3.91 × 10⁴ s⁻¹. When applied to PhOLED devices, TDBA-SePh-based green and red OLEDs exhibited higher external quantum efficiency (EQE) and reduced efficiency roll-off compared to conventional mCP-based host materials. At a luminance of 1000 cd m⁻², the green and red devices exhibited roll-off values of 2.5% and 4.3%, respectively. This improvement is attributed to the incorporation of selenium as a heteroatom, which accelerates the RISC process, thereby suppressing triplet-triplet annihilation (TTA). These results suggest that adopting a similar molecular design strategy can not only reduce efficiency roll-off but also enhance device efficiency and operational stability, offering significant potential for future OLED applications. Full article

Metal oxide semiconductors, such as indium gallium zinc oxide (IGZO), have attracted significant attention from researchers in the fields of liquid crystal displays (LCDs) and organic light-emitting diodes (OLEDs) for decades. This interest is driven by their high electron mobility of over ~10 cm²/V·s and excellent transmittance of more than ~80%. Amorphous IGZO (a-IGZO) offers additional advantages, including compatibility with various processes and flexibility making it suitable for applications in flexible and wearable devices. Furthermore, IGZO-based thin-film transistors (TFTs) exhibit high uniformity and high-speed switching behavior, resulting in low power consumption due to their low leakage current. These advantages position IGZO not only as a key material in display technologies but also as a candidate for various next-generation electronic devices. This review paper provides a comprehensive overview of IGZO-based electronics, including applications in gas sensors, biosensors, and photosensors. Additionally, it emphasizes the potential of IGZO for implementing logic gates. Finally, the paper discusses IGZO-based neuromorphic devices and their promise in overcoming the limitations of the conventional von Neumann computing architecture. Full article

Low-color-temperature candlelight organic light-emitting diodes (OLEDs) offer a healthier lighting alternative by minimizing blue light exposure, which is known to disrupt circadian rhythms, suppress melatonin, and potentially harm the retina with prolonged use. In this study, we explore the integration of transition metal dichalcogenides (TMDs), specifically molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂), into the hole injection layers (HILs) of OLEDs to enhance their performance. The TMDs, which are known for their superior carrier mobility, optical properties, and 2D layered structure, were doped at levels of 0%, 5%, 10%, and 15% in PEDOT:PSS-based HILs. Our findings reveal that OLEDs doped with 10% MoS₂ exhibit notable enhancements in power efficacy (PE), current efficacy (CE), and external quantum efficiency (EQE) of approximately 39%, 21%, and 40%, respectively. In comparison, OLEDs incorporating 10% of WS₂ achieve a PE of 28%, a CE of 20%, and an EQE of 35%. The enhanced performance of the MoS₂-doped devices is attributed to their superior hole injection and balanced carrier transport properties, resulting in more efficient operation. These results highlight the potential of incorporating 2D TMDs, especially MoS₂, into OLED technology as a promising strategy to enhance energy efficiency. This approach aligns with environmental, social, and governance (ESG) goals by emphasizing reduced environmental impact and promoting ethical practices in technology development. The improved performance metrics of these TMD-doped OLEDs suggest a viable path towards creating more energy-efficient and health-conscious lighting solutions. Full article

Polymers containing π-conjugated segments are a diverse group of large molecules with semiconducting and emissive properties, with strong potential for use as active layers in Organic Light-Emitting Diodes (OLEDs). Stable blue-emitting materials, which are utilized as emissive layers in solution-processed OLED devices, are essential for their commercialization. Achieving balanced charge injection is challenging due to the wide bandgap between the HOMO and LUMO energy levels. This study examines the optical and photophysical characteristics of blue-emitting polymers to contribute to the understanding of the fundamental mechanisms of color purity and its stability during the operation of OLED devices. The investigated materials are a novel synthesized lab scale polymer, namely poly[(2,7-di(p-acetoxystyryl)-9-(2-ethylhexyl)-9H-carbazole-4,4′-diphenylsulfone)-co-poly(2,6-diphenylpyrydine-4,4′-diphenylsulfone] (CzCop), as well as three commercially supplied materials, namely Poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO), poly[9,9-bis(2′-ethylhexyl) fluorene-2,7-diyl] (PBEHF), and poly (9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole) (F6PC). The materials were compared to evaluate their properties using Spectroscopic Ellipsometry, Photoluminescence, and Atomic Force Microscopy (AFM). Additionally, the electrical characteristics of the OLED devices were investigated, as well as the stability of the electroluminescence emission spectrum during the device’s operation. Finally, the determined optical properties, combined with their photo- and electro-emission characteristics, provided significant insights into the color stability and selectivity of each material. Full article

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a commonly used conductive polymer in organic optoelectronic devices. The conductivity and work function of the PEDOT:PSS are two important parameters that significantly determine the performance of the associated optoelectronic device. Traditionally, some solvents were doped in PEDOT:PSS solution or soaked in PEDOT:PSS film to improve its electrical conductivity, but they damaged the integrity of PEDOT:PSS and reduce the film’s work function. Herein, for the first time, we use femtosecond laser irradiation to modify the electrical conductivity and work function of PEDOT:PSS film. We proposed that the femtosecond laser irradiation could selectively remove the superficial insulative PSS, thereby improving the electrical conductivity of the film. The femtosecond laser-irradiated PEDOT:PSS film was further employed as a hole injection layer within cutting-edge perovskite light-emitting diodes (PeLEDs). A maximum luminosity of 950 cd/m² was obtained in PeLEDs irradiated by femtosecond laser light in thin films, which is five times higher than that of the controlled device. Moreover, the external quantum efficiency of the devices was also increased from 4.6% to 6.3%. This work paved a cost-effective way to regulate the electrical properties of the PEDOT:PSS film. Full article

Polymer light-emitting diodes (PLEDs) hold immense promise for energy-efficient lighting and full-color display technologies. In particular, blue PLEDs play a pivotal role in achieving color balance and reducing energy consumption. The optimization of layer thickness in these devices is critical for enhancing their efficiency. PLED layer thickness control impacts exciton recombination probability, charge transport efficiency, and optical resonance, influencing light emission properties. However, experimental variations in layer thickness are complex and costly. This study employed simulations to explore the impact of layer thickness variations on the optical and electrical properties of blue light-emitting diodes. Comparing the simulation results with experimental data achieves valuable insights for optimizing the device’s performance. Our findings revealed that controlling the insertion of a layer that works as a hole-transporting and electron-blocking layer (EBL) could greatly enhance the performance of PLEDs. In addition, changing the active layer thickness could optimize device performance. The obtained results in this work contribute to the development of advanced PLED technology and organic light-emitting diodes (OLEDs). Full article

Perylenediimides (PDIs) are composed of a central perylene ring, on which are grafted two imide groups at the peri positions. Thionated PDIs are characterized by the substitution of one or more oxygen atoms of these imide functions with sulfur atoms. This structural modification alters the electronic properties with a redshift of the optical absorption accompanied by modification of the charge transport characteristics compared to their non-thionated counterparts. These properties make them suitable candidates for applications in optoelectronic devices, such as organic light-emitting diodes and organic photovoltaics. Moreover, the presence of sulfur atom(s) can favor the promotion of reactive oxygen species production for photodynamic and photothermal therapies. These thionated PDIs can be synthesized through the post-functionalization of PDIs by using a sulfurizing reagent. Nevertheless, the main drawbacks remain the difficulties in adjusting the degree of thionation and obtaining tri- and tetrathionated PDIs. Up to now, this thionation reaction has been described almost exclusively using Lawesson’s reagent. In the current study, we present our first investigations into an alternative reagent to enhance selectivity and achieve a greater degree of thionation. The association of phosphorus pentasulfide with hexamethyldisiloxane (Curphey’s reagent) clearly demonstrated higher reactivity compared with Lawesson’s reagent to attain multi-thionated PDIs. Full article

Wafer-scale blue micro-light-emitting diode (micro-LED) arrays were fabricated with a pixel size of 12 μm, a pixel pitch of 15 μm, and a pixel density of 1692 pixels per inch, achieved by optimizing the properties of e-beam-deposited and sputter-deposited indium tin oxide (ITO). Although the sputter-deposited ITO (S-ITO) films exhibited a densely packed morphology and lower resistivity compared to the e-beam-deposited ITO (E-ITO) films, the forward voltage (V_F) values of a micro-LED with the S-ITO films were higher than those with the E-ITO films. The V_F values for a single pixel and for four pixels with E-ITO films were 2.82 V and 2.83 V, respectively, while the corresponding values for S-ITO films were 3.50 V and 3.52 V. This was attributed to ion bombardment damage and nitrogen vacancies in the p-GaN layer. Surprisingly, the V_F variations of a single pixel and of four pixels with the optimized E-ITO spreading layer from five different regions were only 0.09 V and 0.10 V, respectively. This extremely uniform V_F variation is suitable for creating micro-LED displays to be used in AR and VR applications, circumventing the bottleneck in the development of long-lifespan and high-brightness organic LED devices for industrial mass production. Full article

Energy-level alignment is a crucial factor in the performance of thin-film devices, such as organic light-emitting diodes and photovoltaics. One way to adjust these energy levels is through chemical modification of the molecules involved. However, this approach may lead to unintended changes in the optical and/or electrical properties of the compound. An alternative method for energy-level adjustment at the interface is the use of self-assembling monolayers (SAMs). Initially, SAMs with passive spacers were employed, creating a surface dipole moment that altered the work function (WF) of the electrode. However, recent advancements have led to the synthesis of SAM molecules with active spacers. This development necessitates considering not only the modification of the electrode’s WF but also the ionization energy (IE) of the molecule itself. To measure both the IE of SAM molecules and their impact on the electrode’s WF, a relatively simple method is photo-electric emission spectroscopy. Solar cell performance parameters have a higher correlation coefficient with the ionization energy of SAM molecules with carbazole derivatives as spacers (up to 0.97) than the work function of the modified electrode (up to 0.88). Consequently, SAMs consisting of molecules with active spacers can be viewed as hole transport layers rather than interface layers. Full article

A theoretical analysis is presented for a recently proposed high-speed µ-OLED optically pumped organic laser. We confirm that for this configuration, the laser threshold is reached at a lower current density than in the case of a direct-electrically pumped organic laser diode while generating pulses of order $15 \mathrm{n}\mathrm{s}$ duration. With a validated model for the electrically pumped organic light-emitting diode (OLED), we simulate the generation of light pulses. This light is fed into the organic laser section, where it optically pumps the emitting organic medium. The full model includes field-enhanced Langevin recombination in the OLED, Stoke-shifted reabsorption in both the OLED and organic laser, and an optical cavity in the latter. We numerically demonstrate $2 \mathrm{G}\mathrm{H}\mathrm{z}$ modulation and conjecture the feasibility of $~0.025 \mathrm{M}\mathrm{b}/\mathrm{s}$ data transmission with this device. Full article

We report on organoboron complexes characterized by very small energy gaps (ΔE_ST) between their singlet and triplet states, which allow for highly efficient harvesting of triplet excitons into singlet states for working as thermally activated delayed fluorescence (TADF) devices. Energy gaps ranging between 0.01 and 0.06 eV with dihedral angles of ca. 90° were registered. The spin–orbit couplings between the lowest excited S₁ and T₁ states yielded reversed intersystem crossing rate constants (K_RISC) of an average of 10⁵ s⁻¹. This setup accomplished radiative decay rates of ca. 10⁶ s⁻¹, indicating highly potent electroluminescent devices, and hence, being suitable for application as organic light-emitting diodes. Full article

Although the effect of the conductive polymers PEDOT:PSS on the electroluminescence performance of doped-type organic light-emitting diodes (OLEDs) has been studied, the process of PEDOT:PSS regulation of exciton recombination region and concentration within the deoxyribonucleic acid (DNA)-based doped-type BioLEDs is still obscure. In this study, we fabricated Bio-devices with and without PEDOT:PSS using varying spin-coating speeds of PEDOT:PSS. The Alq₃:Rubrene-based BioLEDs achieve higher luminance (44,010 cd/m²) and higher luminance efficiency (8.1 cd/A), which are increased by 186% and 478%, respectively, compared to the reference BioLEDs without PEDOT:PSS. Similarly, the maximum luminance and efficiency of blue TCTA:TPBi exciplex-type BioLEDs are increased by 224% and 464%. In particular, our findings reveal that with an increasing thickness of PEDOT:PSS, the region of exciton recombination shifts towards the interface between the emitting layer (EML) and the hole transport layer (HTL). Meanwhile, the concentration of singlet exciton (S_1,Rub) and triplet exciton (T_1,Rub) increases, and the triplet-triplet annihilation (TTA) process is enhanced, resulting in the enhanced luminescence and efficiency of the devices. Accordingly, we provide a possible idea for achieving high performance doped-type BioLEDs by adding conductive polymers PEDOT:PSS, and revealing the effect of exciton recombination and conversion in BioLEDs given different PEDOT:PSS thicknesses. Full article

The development of organic molecules showing high photoluminescence quantum yield (PLQY) in solid state is a fundamental step for the implementation of efficient light emitting devices. In this work the origin of the high PLQY of two trimers and two pentamers having one central thiophene-S,S-dioxide unit and two and four lateral thiophene or phenyl groups, respectively, is investigated by temperature dependent photoluminescence and time resolved photoluminescence measurements. The experimental results demonstrate that the molecules with lateral phenyl rings show higher PLQY due to a weaker coupling with intramolecular vibrations—related to variations in the radiative and non-radiative decay rates—and indicate different molecular rigidity as the main factors affecting the PLQY of this class of molecules. Full article

Macrocycles have attracted significant attention from academia due to their various applications in organic field-effect transistors, organic light-emitting diodes, organic photovoltaics, and dye-sensitized solar cells. Despite the existence of reports on the application of macrocycles in organic optoelectronic devices, these reports are mainly limited to analyzing the structure–property relationship of a particular type of macrocyclic structure, and a systematic discussion on the structure–property is still lacking. Herein, we conducted a comprehensive analysis of a series of macrocycle structures to identify the key factors that affect the structure–property relationship between macrocycles and their optoelectronic device properties, including energy level structure, structural stability, film-forming property, skeleton rigidity, inherent pore structure, spatial hindrance, exclusion of perturbing end-effects, macrocycle size-dependent effects, and fullerene-like charge transport characteristics. These macrocycles exhibit thin-film and single-crystal hole mobility up to 10 and 26.8 cm² V⁻¹ s⁻¹, respectively, as well as a unique macrocyclization-induced emission enhancement property. A clear understanding of the structure–property relationship between macrocycles and optoelectronic device performance, as well as the creation of novel macrocycle structures such as organic nanogridarenes, may pave the way for high-performance organic optoelectronic devices. Full article