Search Results (187)

Accurate orchard-scale soil moisture information is a key requirement for efficient irrigation management in perennial crops such as citrus orchards, particularly in Mediterranean environments characterized by water scarcity and strong spatial and temporal variability in soil moisture, canopy structure, and irrigation scheduling. This study proposes a hybrid physical–machine learning methodology for soil moisture estimation that integrates in situ capacitance sensor measurements, Sentinel-1 SAR observations, Sentinel-2 optical imagery, and ERA5-Land agroclimatic variables. Physically based soil moisture estimates were first obtained through the inversion of Sentinel-1 backscatter using integral equation scattering models, a physically based soil dielectric model, and a simplified vegetation attenuation scheme. These physically derived estimates were subsequently incorporated as predictors within supervised machine learning models, together with multi-source remote sensing and meteorological variables. Several algorithms were evaluated, including regularized linear models, support vector regression, random forests, and gradient boosting methods. Model performance was assessed using a strict interannual validation strategy based on independent-year predictions to ensure robust generalization. Within this methodology, tree-based ensemble models achieved the highest and most consistent performance at the orchard scale, with coefficients of determination ranging from 0.55 to 0.76 and root mean square errors typically between 0.7 and 1.1% volumetric soil moisture in the best-performing cases. Benchmarking against a physical-only baseline demonstrated that the hybrid methodology consistently reduced prediction errors and improved temporal robustness under independent-year validation. Overall, the results demonstrate that hybrid physical–machine learning approaches provide a robust and scalable solution for orchard-scale soil moisture monitoring in irrigated citrus orchards using operational data streams, supporting advanced irrigation management and precision agriculture applications in Mediterranean perennial cropping systems. Full article

Current diagnostic modalities for rheumatoid arthritis (RA), such as Magnetic Resonance Imaging (MRI) and ultrasound (US), excel at visualizing structural pathology but are either resource-intensive or often limited to morphological assessment. In this work, we present the design and technical validation of a low-cost continuous-wave near-infrared (NIR) dual-mode optical probe for functional monitoring of joint inflammation. Unlike superficial imaging, NIR light penetrates approximately 3–5 cm and is tissue and wavelength dependent, enabling trans-illumination of the synovial volume. The system combines reflectance and transmission geometries to resolve the ambiguity between disease presence and disease severity. To validate the diagnostic logic, we employed mcxyzn Monte Carlo (MC) simulations to model the optical signature of RA progression from early onset to EULAR-OMERACT grade 2 pannus hypertrophy on a simplified finger model, based on several tissue models in the literature and supported by physical measurements on a multilayer silicone phantom and in vivo signal verification on human volunteers. Our results demonstrate a distinct functional dichotomy: reflectance geometry serves as a binary discriminator of synovial turbidity onset, while transmission flux serves as a monotonic proxy for pannus volume, exhibiting a quantifiable signal decay consistent with the Beer–Lambert law. Signal verification on a subject with confirmed RA pathology demonstrated a significant increase in the effective attenuation coefficient (${\mu }_{eff} ~ 0.59$ mm⁻¹) compared to the healthy baseline (${\mu }_{eff} ~ 0.47$ mm⁻¹). Furthermore, simulation analysis revealed a critical “metric inversion” in darker skin phenotypes (Fitzpatrick V–VI), where the standard beam-broadening signature of inflammation is artificially suppressed by epidermal absorption. We conclude that while transmission flux remains a robust grading metric across diverse skin tones, morphological beam-shape metrics are not robust, particularly in high-absorption populations. By targeting the hemodynamic precursors of structural damage, this dual-mode probe design offers a potential pathway for longitudinal, quantitative monitoring of disease activity at the point of care, while the systematic use of the Monte Carlo framework provides insight into the measurement geometry most suitable for a given clinical endpoint, whether that be detecting the presence or severity of rheumatoid arthritis. Full article

Free-space optical (FSO) communication enables high-bandwidth license-free data transmission and is particularly attractive for maritime point-to-point links. However, FSO performance is strongly affected by atmospheric conditions. This work presents a semi-empirical model quantifying the impact of fine particulate matter (PM2.5) on received optical power in a maritime FSO link. The model is derived from long-term experimental measurements collected over a 2.96 km horizontal optical path above the sea surface, combining received signal strength indicator (RSSI) data with co-located PM2.5 observations. Statistical analysis reveals a strong negative correlation between PM2.5 concentration and received optical power (Pearson coefficient −0.748). Using a logarithmic attenuation formulation, the PM2.5-induced attenuation is estimated to increase by approximately 0.0026 dB/km per µg/m³ of PM2.5 concentration. A second-order semi-empirical model captures the observed nonlinear attenuation behavior with a coefficient of determination of R² = 0.57. The proposed model provides a practical tool for link budgeting, performance forecasting, and adaptive design of maritime FSO systems operating in aerosol-rich environments. Full article

This study introduces a framework for estimating the optical scattering properties of thin-film phantoms using a custom-built Spectral-Domain Dental Optical Coherence Tomography (DEN-OCT) system operating within the 780–900 nm spectral range. The purpose of this work was to assess the performance of this system. The system exhibited high depth-resolved imaging performance with an axial resolution of approximately 16.30 µm, a signal-to-noise ratio of about 32.4 dB, and a 6 dB sensitivity roll-off depth near 2 mm, yielding an effective imaging range of 2.5 mm. Thin-film phantoms with controlled optical characteristics were fabricated and analyzed using Beer–Lambert and diffusion approximation models to evaluate attenuation behavior. Samples representing different tissue analogs demonstrated distinct scattering responses: one sample showed strong scattering similar to hard tissues, while the others exhibited lower scattering and higher transmission, resembling soft-tissue properties. Spectrophotometric measurements at 840 nm supported these trends through characteristic transmittance and reflectance profiles. While homogeneous samples conformed to analytical models, the highly scattering sample deviated due to structural non-uniformity, requiring Monte Carlo simulation to accurately describe photon transport. OCT A-scan analyses fitted with exponential decay models produced attenuation coefficients consistent with spectrophotometric data, confirming the dominance of scattering over absorption. The integration of OCT imaging, optical modeling, and Monte Carlo simulation establishes a reliable methodology for quantitative scattering estimation and demonstrates the potential of the developed DEN-OCT system for advanced dental and biomedical imaging applications. The innovation of this work lies in the integration of phantom-based optical calibration, multi-model scattering analysis, and depth-resolved OCT signal modeling, providing a validated pathway for quantitative parameter extraction in dental OCT applications. Full article

Time-resolved spectroscopy (TRS) is a promising tool for noninvasive cerebral monitoring in neonates. However, the optimal forehead site for probe placement remains unclear. In this study, we evaluated the effect of probe positioning on TRS-derived optical parameters in neonates. TRS measurements were obtained from the midline and right lateral forehead of 30 neonates (≥36 weeks’ corrected gestational age). We compared various parameters between the two probe positions, including optical intensity, attenuation, mean optical path length, scattering coefficient, total hemoglobin (tHb), cerebral oxygen saturation (ScO₂) and cerebral blood volume (CBV). No significant differences were observed in tHb, ScO₂ and CBV between the midline and lateral sites. However, the lateral site showed a significantly lower scattering coefficient and shorter mean path length. Light intensity was increased and attenuation was reduced at the lateral site. Thus, while tHb, ScO₂ and CBV values were consistent between sites, the midline provided more stable scattering and optical path data. These findings suggest that the midline forehead may be a more suitable site for TRS-based neonatal cerebral monitoring. Full article

Environmentally friendly materials with superior structural, physical, optical, and shielding capabilities are of great technological importance and are continually being investigated. In this work, novel multicomponent borate glasses with the composition xTiO₂-10BaO-5Al₂O₃-5WO₃-20Bi₂O₃-(60-x) B₂O₃, where 0 ≤ x ≤ 15 mol%, were produced via the melt-quenching technique. The increase in TiO₂ content results in a decrease in molar volume and a corresponding increase in density, indicating the formation of a compact, rigid, and mechanically hard glass network. Elastic constant measurements further confirmed this behavior. FTIR analysis confirms the transformation of BO₃ to BO₄ units, signifying improved network polymerization and structural stability. The prepared glasses exhibit an optical absorption edge in the visible region, demonstrating their strong ultraviolet light blocking capability. Incorporation of TiO₂ leads to an increase in refractive index, optical basicity, and polarizability, and a decrease in the optical band gap and metallization number; all of these suggest enhanced electron density and polarizability of the glass matrix. Radiation shielding properties were evaluated using Phy-X/PSD software. The outcomes illustrate that the Mass Attenuation Coefficient (MAC), Effective Atomic Number (Z_eff), Linear Attenuation Coefficient (LAC) increase, while Mean Free Path (MFP) and Half Value Layer (HVL) decrease with increasing TiO₂ at the expense of B₂O₃, confirming superior gamma-ray attenuation capability. Additionally, both TiO₂-doped and undoped samples show higher fast neutron removal cross sections (FNRCS) compared to several commercial glasses and concrete materials. Overall, the incorporation of TiO₂ significantly enhances the optical performance and radiation-shielding efficiency of the environmentally friendly glass system, making these potential candidates for advanced photonic devices and radiation-shielding applications. Full article

The vertical attenuation coefficient of photosynthetically active radiation ($K_d\left(PAR\right)$) is essential for characterizing the underwater light field and for operational marine monitoring. Although there have been efforts to use the standard satellite light attenuation product at 490 nm ($K_d\left(490\right)$) to estimate ($K_d\left(PAR\right)$) over a decade, earlier approaches were constrained by limited data. This study used a globally representative robust database of in-situ and satellite observations spanning diverse marine optical conditions and applied rigorous quality control. Three empirical models (linear, power, and a higher-order polynomial) were developed using four $K_d\left(490\right)$ satellite variants validated against an independent dataset and benchmarked against six published algorithms (36 total approximations). Performance was assessed using a Model Performance Index (MPI), where values closer to 1 indicate a better model. The best model was a power regression driven by the standard satellite $K_d\left(490\right)$, which yielded an MPI of 0.8704, indicating a robust performance under a wide variability of marine optical conditions. These results highlight the value of multisensor products, which with a rigorous quality control protocol, could be used to estimate the $K_d\left(PAR\right)$ from the standard satellite $K_d\left(490\right)$. The objective of the proposed algorithm is to generate long-term $K_d\left(PAR\right)$ time series. This algorithm will be operational for implementation in marine ecosystem monitoring systems and can contribute to strengthening decision-making. Full article

Second harmonic generation measurements for neodymium-doped bismuth–tellurium borate (Bi₃TeBO₉:Nd³⁺) powders are shown for the first time. Using undoped and low-content Nd³⁺-doped samples associated with the strongest nonlinear optical response, studies of temperature-dependent second-harmonic generation near the absorption edge were conducted. Spectroscopic measurements of the investigated powders revealed characteristic Nd³⁺ absorption bands and helped to estimate the corresponding energy band gaps for the chosen samples. The influence of low Nd³⁺-content on the absorption edge shift, as well as on the enhancement of second-harmonic generation and its temperature attenuation, is discussed. Temperature-dependent X-ray diffraction measurements enabled researchers to calculate the thermal expansion coefficients for undoped and Nd³⁺-doped Bi₃TeBO₉ and to assess the impact of this phenomenon on its acentricity. Thermogravimetric studies demonstrated the absence of phase transitions for the chosen samples up to their incongruent melting points. Energy Dispersive X-ray Spectroscopy measurements verified the uniformity of Nd³⁺ distribution in doped Bi₃TeBO₉ powders. The suitability of polycrystalline Bi₃TeBO₉:Nd³⁺ as media for the self-frequency doubling devices for potential optoelectronic and biomedical applications was assessed. The finest fractions of deagglomerated and suspended powders were extracted and demonstrated near-nanostructural morphology of separated particles, as revealed by means of atomic force microscopy. Full article

The results of an experimental comparative study on absorptive nonlinear optical properties of deoxyribonucleic acid (DNA)–cetyltrimethylammonium chloride (CTMA) biopolymer functionalized with spirulina natural dye, as solutions in butanol, and on the same nonlinear optical properties of similar solutions with spirulina only, are presented. The spectroscopic characterisation of the investigated complexes is performed by Ultraviolet–Visible-Near-Infrared (UV-VIS-NIR) spectroscopy and Attenuated Total Reflection Fourier-transform Infrared (ATR-FTIR) spectroscopy. Their optical limiting functionality is experimentally demonstrated at the wavelength of 1550 nm (an important telecommunication wavelength) using ultrashort laser pulses (~120 fs). Important parameters that characterise the optical limiting (nonlinear absorption coefficient β, and saturation intensity, I_sat) are determined by the Intensity-scan (I-scan) method in the investigated materials. The results of our experimental investigation reveal, for the first time to the best of our knowledge, a significant absorptive nonlinear optical response of spirulina natural dye and its potential for optical limiting. The favourable effect of the DNA biopolymer on the nonlinear optical response of the investigated solutions, resulting in the enhancement of their nonlinear optical properties, is demonstrated. Thus, the investigated DNA–CTMA–spirulina liquid compound is a promising novel “green” material for passive optical limiting devices to protect sensitive optical and optoelectronic devices from high-intensity near-infrared laser beams. Also, from dye-doped DNA compounds as solutions it is possible to obtain, by different methods (e.g., spin-coating, drop casting), thin films as the base of all-optical solid-state limiting devices. Full article

The increasing demand for sustainable and multifunctional materials in radiation shielding and optical applications has driven research toward utilizing natural and waste-derived reinforcements in polymer matrices. However, achieving effective attenuation performance across different radiation types using eco-friendly fillers remains a significant challenge. In this study, polyvinyl chloride (PVC)/Polystyrene (PSt) blend composites (1:1 weight ratio) were reinforced with powdered snail shell (SSP) as a biogenic additive, aiming to enhance their shielding and optical performance. Composites containing 5%, 10%, 20%, and 30% SSP (w/v) were fabricated and characterized. Key parameters including linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), mean free path (MFP), half-value layer (HVL), and effective atomic number (Zeff) were measured using a variable-energy X-ray source (13.37–59.54 keV) and ULEGe detector. Fast neutron shielding performance and theoretical values for build-up factor (EBF) and macroscopic neutron cross-sections were also calculated. The results showed a marked improvement in X-ray attenuation with increasing SSP content (SSP30 > SSP20 > SSP10 > SSP5), while neutron shielding declined due to the high oxygen content of SSP. Among the tested samples, the SSP30 composite exhibited the highest X-ray attenuation efficiency, whereas the SSP5 composition showed the greatest enhancement in optical reflectance and neutron absorption, indicating optimal performance in these respective tests. Additionally, 5% SSP incorporation improved optical reflectance by 12%, indicating enhanced photon backscattering at the material surface. This behavior contributes to improved gamma shielding efficiency by reducing photon penetration and enhancing surface-level attenuation. These findings highlight the potential of snail shell-based fillers as low-cost, sustainable reinforcements in multifunctional polymer composites. Full article

High-Andean lakes are strategic freshwater ecosystems whose monitoring is essential for effective water resource management. However, their optical complexity limits the applicability of conventional methods. In this study, the water quality conditions of the Ozogoche lakes, located in Sangay National Park (PNS), were assessed using Sentinel-2 (S2), Landsat-8 OLI (L8), and Landsat-9 (L9) imagery processed with automated water products from the Case 2 Regional Coast Colour (C2RCC) processor, including the C2RCC, C2X-COMPLEX, and C2X versions. Comparisons between in situ chlorophyll-a (Chl-a) measurements and satellite-derived products confirmed that C2RCC achieved the lowest error (RMSE = 0.68 mg/m³). The multitemporal analysis (2016–2024) of Chl-a, total suspended solids (TSSs), and the diffuse attenuation coefficient (kd_z90max) revealed interannual variations. The results consistently classified the lakes as ultra-oligotrophic, providing an integrated perspective of their environmental quality. This study demonstrates the reliability of C2RCC products for monitoring high-Andean aquatic ecosystems and underscores the potential of remote sensing to overcome accessibility and cloud cover constraints, delivering valuable insights for the sustainable management of water resources in protected areas. Full article

Background: Optical Coherence Tomography (OCT) is a high-resolution imaging technique capable of quantifying Blood Flow at Depth (BD) and the Attenuation Coefficient (AC). However, the clinical relevance of these parameters in burn assessment remains unclear. This study investigated whether OCT-derived metrics can differentiate between superficial and deep pediatric hand burns. Method: This prospective, single-center study analyzed 73 OCT scans from 37 children with thermal hand injuries. A structured algorithm was used to evaluate AC and BD. Results: The mean AC was 1.61 mm⁻¹ (SD ± 0.48), with significantly higher values in deep burns (2.11 mm⁻¹ ± 0.53) compared to superficial burns (1.49 mm⁻¹ ± 0.38; p < 0.001), reflecting increased optical density in more severe burns. BD did not differ significantly between burn depths, although superficial burns more often showed visible capillary networks. Conclusions: This is the first study to assess both AC and BD using OCT in pediatric hand burns. AC demonstrated potential as a diagnostic marker for burn depth, whereas BD had limited utility. Image quality limitations highlight the need for technical improvements to enhance OCT’s clinical application. Full article

Coral reefs exposed to chronically turbid conditions challenge conventional assumptions about the optical environments required for reef persistence and productivity. This study investigates the utility of light absorption coefficients as indicators of optical water quality in Varadero Reef, an extreme coral ecosystem located in Cartagena Bay, Colombia. Field campaigns were conducted across three seasons (rainy, dry, and transitional) along a transect from fluvial to marine influence. Absorption coefficients at 440 nm were derived for particulate (a_p(440)) and chromophoric dissolved organic matter (a_CDOM(440)) to assess their contribution to underwater light attenuation. Average values across seasons show that a_p(440) reached 0.466 m⁻¹ in the rainy season (September 2021), 0.285 m⁻¹ in the dry season (February 2022), and 0.944 m⁻¹ in the transitional rainy season (June 2022). Meanwhile, mean a_CDOM(440) values were 0.368, 0.111, and 0.552 m⁻¹, respectively. These coefficients reflect the dominant influence of particulate absorption under turbid conditions and increasing a_CDOM(440) relevance during lower turbidity periods. Mean Secchi Disk Depth (ZSD) ranged from 0.6 m in the rainy season to 3.0 m in the dry season, aligning with variations in Kd PAR, which averaged 2.63 m⁻¹, 1.13 m⁻¹, and 1.08 m⁻¹ for the three campaigns. Chlorophyll-a concentrations at 1 m depth also varied significantly, with average values of 2.3, 2.7, and 6.2 μg L⁻¹, indicating phytoplankton biomass peaks associated with seasonal freshwater inputs. While particulate absorption limits light penetration, CDOM plays a potentially photoprotective role by attenuating UV radiation. The observed variability in these optical constituents reflects complex hydrodynamic and environmental gradients, providing insight into the mechanisms that sustain coral functionality under suboptimal light conditions. The absorption-based approach applied here, using standardized spectrophotometric methods, proved to be a reliable and reproducible tool for characterizing the spatial and temporal variability of IOPs. We propose integrating these indicators into monitoring frameworks as cost-effective, component-resolving tool for evaluating light regimes and ecological resilience in optically dynamic coastal systems. Full article

To promote the development of long-distance high-speed underwater optical wireless communication (UWOC) based on visible light, this study proposes a high-bandwidth UWOC system based on micro-light-emitting-diodes (micro-LEDs) adopting the Non-Return-to-Zero On-Off Keying (NRZ-OOK) modulation. The numerical simulations reveal that optimizing the structural parameters of gallium nitride (GaN)-based micro-LED through dimensional scaling and quantum well layer reduction may significantly enhance optoelectronic performance, including modulation bandwidth and luminous efficiency. Moreover, experimental validation demonstrated maximum real-time data rates of 420 Mbps, 290 Mbps, and 250 Mbps at underwater distances of 2.3 m, 6.9 m, and 11.5 m, respectively. Furthermore, the underwater audio communication was successfully implemented at an 11.5 m UWOC distance at an ultra-low level of incoming optical power (12.5 µW) at the photodetector (PD) site. The channel characterization yielded a micro-LED-specific attenuation coefficient of 0.56 dB/m, while parametric analysis revealed wavelength-dependent degradation patterns, exhibiting positive correlations between both attenuation coefficient and bit error rate (BER) with operational wavelength. This study provides valuable insights for optimizing underwater optical systems to enhance real-time environmental monitoring capabilities and strengthen security protocols for subaquatic military communications in the future. Full article

This study synthesizes and comparatively investigates two squaric acid-based phthalocyanine-like dyes, SNF and its long-chain alkylated derivative LNF, to systematically elucidate the influence of peripheral hydrophobic groups on their third-order nonlinear optical (NLO) properties. The NLO characteristics were comprehensively characterized using femtosecond Z-scan and I-scan techniques at both 800 nm and 900 nm. Both dyes exhibited strong saturable absorption (SA), confirming their potential as saturable absorbers. Critically, the comparative analysis revealed that SNF exhibits a significantly greater nonlinear absorption coefficient (β) compared to LNF under identical conditions. For instance, at 800 nm, the β of SNF was approximately 3–5 times larger than that of LNF. This result conclusively demonstrates that the introduction of long hydrophobic alkyl chains attenuates the NLO response. Furthermore, I-scan measurements revealed excellent SA performance, with high modulation depths (e.g., LNF: 43.0% at 900 nm) and low saturation intensities. This work not only clarifies the structure–property relationship in these D-A-D dyes but also presents a clear strategy for modulating the NLO properties of organic chromophores for applications in near-infrared pulsed lasers. Full article