Search Results (25)

Biofouling presents a major challenge for maritime industries, leading to the widespread use of copper-based biocidal coatings that, while effective, release harmful substances into marine environments. Biocide-free alternatives, such as silicone-based, hydrogel, and natural product-derived coatings, offer more sustainable solutions. This systematic review and meta-analysis assesses the functional, economic, and environmental performance of both coating types using PRISMA guidelines and literature from Scopus and ISI Web of Knowledge (2003–2025). Data from experimental, field, and modeling studies were synthesized, covering fouling intensity, coating durability, toxicity, cost-effectiveness, and regulatory compliance. Biocidal coatings generally performed better short-term, but biocide-free options showed comparable efficacy in some cases and clear environmental benefits. Although initial costs for biocide-free coatings are higher, they may yield savings over time. The meta-analysis found no significant differences in fouling or hydrodynamic performance, though quantitative evidence is limited. Research gaps remain, particularly in long-term studies, highlighting the need for standardized testing and lifecycle assessments to guide sustainable antifouling practices. The outcome of the review also showed that some evidence was excluded due to being in non-indexed sources. This highlights the importance of combining systematic and traditional review methods to ensure a more comprehensive assessment. Full article

The adherence of pathogenic microorganisms to surfaces and their association to form antibiotic-resistant biofilms threatens public health and affects several industrial sectors with significant economic losses. For this reason, the medical, pharmaceutical and materials science communities are exploring more effective anti-fouling approaches. This review focuses on the anti-fouling properties, structure–activity relationships and environmental toxicity of quaternary ammonium salts (QAS) and, as a subclass, ionic liquid compounds. Greener alternatives such as QAS-based antimicrobial polymers with biocide release, non-fouling (i.e., PEG, zwitterions), fouling release (i.e., poly(dimethylsiloxanes), fluorocarbon) and contact killing properties are highlighted. We also report on dual-functional polymers and stimuli-responsive materials. Given the economic and environmental impacts of biofilms in submerged surfaces, we emphasize the importance of less explored QAS-based anti-fouling approaches in the marine industry and in developing efficient membranes for water treatment systems. Full article

Biocides used in antifouling (AF) paints, such as 4,5-dichlorine-2-n-octyl-4-isothiazole-3-one (DCOIT), can gradually leach into the environment. Some AF compounds can persist in the marine environment and cause harmful effects to non-target organisms. Nanoengineered materials, such as mesoporous silica nanocapsules (SiNCs) containing AF compounds, have been developed to control their release rate and reduce their toxicity to aquatic organisms. This study aimed to evaluate the acute toxicity of new nanoengineered materials, SiNC-DCOIT and a silver-coated form (SiNC-DCOIT-Ag), as well as the free form of DCOIT and empty nanocapsules (SiNCs), on the sun coral Tubastraea coccinea. T. coccinea is an invasive species and can be an alternative test organism for evaluating the risks to native species, as most native corals are currently threatened. The colonies were collected from the Alcatrazes Archipelago, SP, Brazil, and acclimatized to laboratory conditions. They were exposed for 96 h to different concentrations of the tested substances: 3.33, 10, 33, and 100 µg L⁻¹ of free DCOIT; 500, 1000, 2000, and 4000 µg L⁻¹ of SiNC; and 74.1, 222.2, 666.7, and 2000 µg L⁻¹ of SiNC-DCOIT and SiNC-DCOIT-Ag. The test chambers consisted of 500 mL flasks containing the test solutions, and the tests were maintained under constant aeration, a constant temperature of 23 ± 2 °C, and photoperiod of 12 h:12 h (light/dark). At the end of the experiments, no lethal effect was observed; however, some sublethal effects were noticeable, such as the exposure of the skeleton in most of the concentrations and replicates, except for the controls, and embrittlement at higher concentrations. Adults of T. coccinea were considered slightly sensitive to the tested substances. This resistance may indicate a greater capacity for proliferation in the species, which is favored in substrates containing antifouling paints, to the detriment of the native species. Full article

In the 21st century, humans are facing a high risk of exposure to emerging pollutants. Water contamination has become a major threat due to its devastating impacts on the entire ecosystem. Relatively great danger for aquatic microorganisms is posed by organic micropollutants, which are a consequence of progressing urbanization and industrialization. This review focuses on laccase of mainly fungal and bacterial origin, which provides an eco-friendly strategy for the transformation of these harmful pollutants to less or non-toxic compounds, as it acts oxidatively on the aromatic ring of a wide range of compounds, releasing water as the only by-product. Laccase alone or with the use of mediators has been used successfully to remove micropollutants from wastewater, including pharmaceuticals and personal care products, biocides, endocrine disrupting agents, steroid hormones, and microplastics. Even though the potential of an LMS (laccase–mediator system) is tremendous, the selection of an appropriate mediator and the persistent monitoring of toxicity after treatment are critical and should be performed routinely. Hence, further research is still needed for the optimization of degradation processes to improve our understanding of the different interactions of laccase with the substrate and to develop sustainable advanced water treatment systems. Full article

Natural antifoulants have received significant interest in the search for non- or less-toxic antifouling coating systems for marine structures. Capsaicin, a natural compound that can be found in chili peppers, is known as an environmentally friendly antifouling agent with an excellent performance and a low environmental impact. However, controlling its release from the coating matrix is still an issue to be solved. With the aim of developing an eco-friendly antifouling system with prolonged long-term activity, in this study, we incorporated capsaicin in combination with dichlofluanid into water-based acrylic coating formulations. The antifouling activity of the resulting coatings was studied by examining the survival behavior of a Gram-negative marine bacterium Aeromonas Salmonoid ATCC 33658, and the release rate of capsaicin from the paint matrix was also assessed. The combination of 0.75 wt.% capsaicin and 0.75 wt.% dichlofluanid into the same matrix showed an antibacterial performance of up to 99.9% cfu reduction with an antibacterial value R 2.5–3 times higher than those obtained with the single biocides at 1.5 wt.%. The association between the two organic biocides created a synergistic effect on the antifouling performance, further resulting in a prolonged activity. Full article

Due to environmental regulations, antifouling marine coatings must be gradually replaced by biocide-free coatings. Marine organisms weakly adhere to fouling release coatings, presenting a low surface free energy and a high elasticity, so they can be readily removed by the sheer force of water. Currently, these materials are mainly composed of petrochemical polymers, such as silicone or fluoropolymers, with hydrophilic polymers as additives. However, following the ever-increasing environmental concerns, the research on new, alternative, eco-friendly coatings is oriented towards the use of biobased polymers from renewable resources. Two main families have been studied: polyhydroxyalkanoates (PHAs) and polysaccharides. PHAs are produced by bacteria in stressful conditions, while polysaccharides are extracted from plants, animals, or micro-organisms such as bacteria, in which case they are called exopolysaccharides (EPS). Since the use of these polymers is a non-toxic approach to controlling fouling colonization, this review provides an overview of these biobased polymers for their applications in new anti-adhesive marine coatings. Full article

The aim of the work was to examine the possibility of using modified halloysite nanotubes as a gentamicin carrier and to determine the usefulness of the modification in terms of the effect on the amount of the drug attached, its release time, but also on the biocidal properties of the carriers. In order to fully examine the halloysite in terms of the possibility of gentamicin incorporating, a number of modifications of the native halloysite were carried out prior to gentamicin intercalation with the use of sodium alkali, sulfuric and phosphoric acids, curcumin and the process of delamination of nanotubes (expanded halloysite) with ammonium persulfate in sulfuric acid. Gentamicin was added to unmodified and modified halloysite in an amount corresponding to the cation exchange capacity of pure halloysite from the Polish Dunino deposit, which was the reference sample for all modified carriers. The obtained materials were tested to determine the effect of surface modification and their interaction with the introduced antibiotic on the biological activity of the carrier, kinetics of drug release, as well as on the antibacterial activity against Escherichia coli Gram-negative bacteria (reference strain). For all materials, structural changes were examined using infrared spectroscopy (FTIR) and X-ray diffraction (XRD); thermal differential scanning calorimetry with thermogravimetric analysis (DSC/TG) was performed as well. The samples were also observed for morphological changes after modification and drug activation by transmission electron microscopy (TEM). The conducted tests clearly show that all samples of halloysite intercalated with gentamicin showed high antibacterial activity, with the highest antibacterial activity for the sample modified with sodium hydroxide and intercalated with the drug. It was found that the type of halloysite surface modification has a significant effect on the amount of gentamicin intercalated and then released into the surrounding environment but does not significantly affect its ability to further influence drug release over time. The highest amount of drug released among all intercalated samples was recorded for halloysite modified with ammonium persulfate (real loading efficiency above 11%), for which high antibacterial activity was found after surface modification, before drug intercalation. It is also worth noting that intrinsic antibacterial activity was found for non-drug-intercalated materials after surface functionalization with phosphoric acid (V) and ammonium persulfate in the presence of sulfuric acid (V). Full article

This study focused on the antifouling effect of copper oxide (Cu₂O)- and zineb-based coatings against Cyanothece sp. ATCC 51142 by analysing photosynthetic activity using chlorophyll fluorescence. The photoautotrophically grown cyanobacterium was exposed to toxic coatings over a short-term period of 32 h. The study showed that Cyanothece cultures are particularly sensitive to biocides (i) released from antifouling paints and (ii) exhibited by contact with the coated surfaces. Changes in the maximum quantum yield of photosystem II (F_V/F_M) were observed within the first 12 h of exposure to the coatings. Partial recovery of F_V/F_M in Cyanothece was revealed 24 h post exposure to a copper- and zineb-free coating. In this research, we proposed an analysis of the evaluation of fluorescence data to study the initial response of cyanobacterial cells to copper- and non-copper-based antifouling coatings formulated with zineb. We evaluated the dynamics of coating toxicity by determining the characteristic time constants of changes in the F_V/F_M. Within the most toxic paints studied, those formulated with the highest concentration of Cu₂O and zineb, the estimated time constants were 3.9 times lower compared to the copper- and zineb-free paint. The use of zineb in copper-based antifouling coatings enhanced the toxic effect of paints and contributed to a faster decline in photosystem II activity in Cyanothece cells. The analysis we proposed, along with the fluorescence screening results, may be useful in evaluating the initial antifouling dynamic action against photosynthetic aquacultures. Full article

Due to its several economic and ecological consequences, biofouling is a widely recognized concern in the marine sector. The search for non-biocide-release antifouling coatings has been on the rise, with carbon-nanocoated surfaces showing promising activity. This work aimed to study the impact of pristine graphene nanoplatelets (GNP) on biofilm development through the representative marine bacteria Cobetia marina and to investigate the antibacterial mechanisms of action of this material. For this purpose, a flow cytometric analysis was performed and a GNP/polydimethylsiloxane (PDMS) surface containing 5 wt% GNP (G5/PDMS) was produced, characterized, and assessed regarding its biofilm mitigation potential over 42 days in controlled hydrodynamic conditions that mimic marine environments. Flow cytometry revealed membrane damage, greater metabolic activity, and endogenous reactive oxygen species (ROS) production by C. marina when exposed to GNP 5% (w/v) for 24 h. In addition, C. marina biofilms formed on G5/PDMS showed consistently lower cell count and thickness (up to 43% reductions) than PDMS. Biofilm architecture analysis indicated that mature biofilms developed on the graphene-based surface had fewer empty spaces (34% reduction) and reduced biovolume (25% reduction) compared to PDMS. Overall, the GNP-based surface inhibited C. marina biofilm development, showing promising potential as a marine antifouling coating. Full article

Biofouling has destructive effects on shipping and leisure vessels, thus producing severe problems for marine and naval sectors due to corrosion with consequent elevated fuel consumption and higher maintenance costs. The development of anti-fouling or fouling release coatings creates deterrent surfaces that prevent the initial settlement of microorganisms. In this regard, new silica-based materials were prepared using two alkoxysilane cross-linkers containing epoxy and amine groups (i.e., 3-Glycidyloxypropyltrimethoxysilane and 3-aminopropyltriethoxysilane, respectively), in combination with two functional fluoro-silane (i.e., 3,3,3-trifluoropropyl-trimethoxysilane and glycidyl-2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9-hexadecafluorononylether) featuring well-known hydro repellent and anti-corrosion properties. As a matter of fact, the co-condensation of alkoxysilane featuring epoxide and amine ends, also mixed with two opportune long chain and short chain perfluorosilane precursors, allows getting stable amphiphilic, non-toxic, fouling release coatings. The sol–gel mixtures on coated glass slides were fully characterized by FT-IR spectroscopy, while the morphology was studied by scanning electron microscopy (SEM), and atomic force microscopy (AFM). The fouling release properties were evaluated through tests on treated glass slides in different microbial suspensions in seawater-based mediums and in seawater natural microcosms. The developed fluorinated coatings show suitable antimicrobial activities and low adhesive properties; no biocidal effects were observed for the microorganisms (bacteria). Full article

Invasive crayfish are among the major threats to freshwater ecosystems, with the signal crayfish, Pacifastacus leniusculus, being one of the most successful crayfish invaders in Europe. Approaches to invasive crayfish control range from manual and physical to biological and biocidal control methods. However, all of these approaches have their drawbacks and have limited efficacy. Among traditional approaches with minimal impacts on environment and non-target species, manual control via trapping is the most frequently applied. More innovative approaches comprise, among others, usage of sterile male release technique, whose efficacy in the field is yet to be fully tested, especially how it combines with more traditional approaches. A good alternative to costly and logistically challenging field comparisons of these approaches and their combinations is population modeling. Population models can integrate all relevant species-specific biological and ecological information and can be applied to identify management scenarios of highest impact on invasive crayfish abundances. In this study, we developed a conceptual population model of the invasive P. leniusculus following the Pop-GUIDE framework. In addition, we expanded on the framework to increase its applicability to other fields beyond environmental risk assessment. Finally, we discuss potential application of the model and its future use as a management tool. Full article

Biofilm-associated infections caused by an accumulation of micro-organisms and pathogens significantly impact the environment, health risks, and the global economy. Currently, a non-biocide-releasing superhydrophobic surface is a potential solution for antibacterial purposes. This research demonstrated a well-designed robust polydimethylsiloxane (PDMS) micro-structure and a flame treatment process with improved hydrophobicity and bacterial anti-adhesion properties. After the flame treatment at 700 ± 20 °C for 15 s, unique flower-petal re-entrant nano-structures were formed on pillars (PIL-F, width: 1.87 ± 0.30 μm, height: 7.76 ± 0.13 μm, aspect ratio (A.R.): 4.14) and circular rings with eight stripe supporters (C-RESS-F, width: 0.50 ± 0.04 μm, height: 3.55 ± 0.11 μm, A.R.: 7.10) PDMS micro-patterns. The water contact angle (WCA) and ethylene glycol contact angle (EGCA) of flame-treated flat-PDMS (FLT-F), PIL–F, and C–RESS-F patterns were (133.9 ± 3.8°, 128.6 ± 5.3°), (156.1 ± 1.5°, 151.5 ± 2.1°), and (146.3 ± 3.5°, 150.7 ± 1.8°), respectively. The Escherichia coli adhesion on the C-RESS-F micro-pattern with hydrophobicity and superoleophobicity was 42.6%, 31.8%, and 2.9% less than FLT-F, PIL-F, and Teflon surfaces. Therefore, the flame-treated C-RESS-F pattern is one of the promising bacterial anti-adhesion micro-structures in practical utilization for various applications. Full article

In this work, the antimicrobial action of partially quaternized poly(2-(dimethylamino)ethyl methacrylate) (PQDMAEMA) copolymers using different alkyl halides is presented. The poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) homopolymer was synthesized by group transfer polymerization, followed by the modification of its tertiary amine groups, using bromoethane, iodoethane, bromohexane and bromoethanol, to introduce permanent cationic, quaternary ammonium salt moieties, randomly distributed along the polymer chains. In all cases, the degree of quaternization was low, at ~10 mol%, as verified by proton nuclear magnetic resonance spectroscopy to preserve the thermo-responsive character of the PDMAEMA precursor polymer. The biocidal activity of the lightly quaternized PQDMAEMA copolymers against Escherichia coli and Staphylococcus aureus was evaluated by calculating the minimum inhibitory concentration (MIC) as well as the minimum bactericidal concentration (MBC) of the polymers and by comparing them to the respective values of the precursor non-quaternized PDMAEMA homopolymer. The antibacterial mechanism of action in the solution was studied by zeta potential measurements, scanning electron microscopy and protein leakage tests signifying the disruption of the outer membrane of the bacterial cells to release their periplasmic proteins. Full article

Essential oils are widely recognized as natural alternatives to pharmaceutical antibacterial and antifungal agents. With respect to standard pharmaceutics, the advantages of essential oils are their (i) low production costs, (ii) lack of chemical and biochemical drawbacks that are intrinsic to the synthetic production process and (iii) good tolerance by humans. On the other hand, the liquid nature of essential oils poses concerns about their actual application in different therapeutic issues regarding their persistence and the ability to control or prolong drug release. In this study, two essential oils from oregano and winter savory showing antibacterial and antifungal features were complexed in a solid state with beta-cyclodextrin. Host–guest inclusion complexes were characterized using FT-IR spectroscopy, ESI-MS and GC-MS techniques. Manyfold terpenic and non-terpenic components of the oils could be observed and unambiguously identified as being included inside the carbohydrate hosts. Many of them provided a specific biocidal action. Indeed, essential oil host–guest inclusion products were tested against two Candida species and an S. aureus reference strain, showing that the oils effectively maintained their liquid performances. Solid-state tablets of the essential oil inclusion complexes embedded in polyvinylpyrrolidone could be obtained. These results pave the way for the solid-state application of essential oils in antibacterial and antifungal pharmaceutical treatments. Full article

The non-toxic inorganic antimicrobial agents iodine (I₂) and copper (Cu) are interesting alternatives for biocidal applications. Iodine is broad-spectrum antimicrobial agent but its use is overshadowed by compound instability, uncontrolled iodine release and short-term effectiveness. These disadvantages can be reduced by forming complex-stabilized, polymeric polyiodides. In a facile, in-vitro synthesis we prepared the copper-pentaiodide complex [Cu(H₂O)₆(12-crown-4)₅]I₆ · 2I₂, investigated its structure and antimicrobial properties. The chemical structure of the compound has been verified. We used agar well and disc-diffusion method assays against nine microbial reference strains in comparison to common antibiotics. The stable complex revealed excellent inhibition zones against C. albicans WDCM 00054, and strong antibacterial activities against several pathogens. [Cu(H₂O)₆(12-crown-4)₅]I₆ · 2I₂ is a strong antimicrobial agent with an interesting crystal structure consisting of complexes located on an inversion center and surrounded by six 12-crown-4 molecules forming a cationic substructure. The six 12-crown-4 molecules form hydrogen bonds with the central Cu(H₂O)₆. The anionic substructure is a halogen bonded polymer which is formed by formal I₅⁻ repetition units. The topology of this chain-type polyiodide is unique. The I₅⁻ repetition units can be understood as a triodide anion connected to two iodine molecules. Full article