Search Results (7,630)

Predicting short-term buy and sell signals in financial markets remains a significant challenge for algorithmic trading. This difficulty stems from the data’s inherent volatility and noise, which often leads to spurious signals and poor trading performance. This paper presents a novel algorithmic trading model for silver that combines fine-tuned Convolutional Neural Networks (CNNs) with a decision filter based on the Relative Strength Index (RSI). The technique allows for the prediction of buy and sell points by turning time series data into chart images. Daily silver price per ounce data were turned into chart images using technical analysis indicators. Four pre-trained CNNs, namely AlexNet, VGG16, GoogLeNet, and ResNet-50, were fine-tuned using the generated image dataset to find the best architecture based on classification and financial performance. The models were evaluated using walk-forward validation with an expanding window. This validation method made the tests more realistic and the performance evaluation more robust under different market conditions. Fine-tuned VGG16 with the RSI filter had the best cost-adjusted profitability, with a cumulative return of 115.03% over five years. This was nearly double the 61.62% return of a buy-and-hold strategy. This outperformance is especially impressive because the evaluation period was mostly upward, which makes it harder to beat passive benchmarks. Adding the RSI filter also helped models make more disciplined decisions. This reduced transactions with low confidence. In general, the results show that pre-trained CNNs fine-tuned on visual representations, when supplemented with domain-specific heuristics, can provide strong and cost-effective solutions for algorithmic trading, even when realistic cost assumptions are used. Full article

The bulk linearization technique is a design strategy used to extend the linear region of a metal oxide semiconductor field effect transistor (MOSFET) by increasing its saturation voltage through a composite structure and a gate biasing circuit. This allows us to develop compact and flexible pseudo-resistor elements for integrated circuit designs. In this paper we propose a new simple yet effective design approach, focused on the biasing circuit, that optimizes area, offset, and power consumption without altering the design complexity of the original solution. Post-layout simulations verify the presented design strategy, which is then applied for designing a band-pass filter for neural action potential acquisition. Results of harmonic distortion and noise analysis strengthen the validity of the proposed strategy. Full article

This study presents the design, implementation, and experimental validation of a self-contained earthquake early warning system (EEWS) based on real-time frequency-domain analysis of ground motion. The proposed system integrates a low-noise triaxial micro-electro-mechanical system (MEMS) accelerometer with a high-performance microcontroller, enabling autonomous seismic event detection without dependence on external communications or centralized infrastructure. The characteristic period of ground motion (τ_c) is estimated using a spectral moment method applied to the first three seconds of vertical acceleration following P-wave arrival. Event triggering is based on a short-term average/long-term average (STA/LTA) algorithm, with alarm logic incorporating both spectral and amplitude thresholds to reduce false positives from low-intensity or distant events. Experimental validation was conducted using a custom-built uniaxial shaking table, replaying 10 real earthquake records (Mw 4.1–7.7) in 20 repeated trials each. Results show high repeatability in τ_c estimation and strong correlation with event magnitude, demonstrating the system’s reliability. The findings confirm that modern embedded platforms can deliver rapid, robust, and cost-effective seismic warning capabilities. The proposed EEW solution is well-suited for deployment in critical infrastructure and resource-limited seismic regions, supporting scalable and decentralized early warning applications. Full article

This study explores the aeroacoustic influence of leading-edge serrations applied to stator blades subjected to turbulent inflow, which is representative of rotor–stator interaction in turbomachinery. A set of serrated geometries—75 mm span, with up to 9 teeth corresponding to 10% chord amplitude—was fabricated via 3D printing and tested experimentally in a dedicated aeroacoustic facility at COMOTI. The turbulent inflow was generated using a passive grid, and far-field acoustic data were acquired using a semicircular microphone array placed in multiple inclined planes covering 15°–90° elevation and 0–180° azimuthal angles. The analysis combined power spectral density and autocorrelation techniques to extract turbulence-related quantities, such as integral length scale and velocity fluctuations. Beamforming methods were applied to reconstruct spatial distributions of sound pressure level (SPL), complemented by polar directivity curves to assess angular effects. Compared to the reference case, configurations with serrations demonstrated broadband noise reductions between 2 and 6 dB in the mid- and high-frequency range (1–4 kHz), with spatial consistency observed across measurement planes. The results extend the existing literature by linking turbulence properties to spatially resolved acoustic maps, offering new insights into the directional effects of serrated stator blades. Full article

As engines trend toward miniaturization, lightweight design, and higher power density, noise issues have become increasingly prominent, necessitating precise radiated noise prediction for effective noise control. This study develops a machine learning model based on surface vibration test data, which enhances the efficiency of engine noise prediction and has the potential to serve as an alternative to traditional high-cost engine noise test methods. Experiments were conducted on a four-cylinder, four-stroke diesel engine, collecting surface vibration and radiated noise data under full-load conditions (1600–3000 r/min). Five prediction models were developed using support vector regression (SVR, including linear, polynomial, and radial basis function kernels), random forest regression, and multilayer perceptron, suitable for non-anechoic environments. The models were trained on time-domain and frequency-domain vibration data, with performance evaluated using the maximum absolute error, mean absolute error, and median absolute error. The results show that polynomial kernel SVR performs best in time domain modelling, with an average relative error of 0.10 and a prediction accuracy of up to 90%, which is 16% higher than that of MLP; the model does not require Fourier transform and principal component analysis, and the computational overhead is low, but it needs to collect data from multiple measurement points. The linear kernel SVR works best in frequency domain modelling, with an average relative error of 0.18 and a prediction accuracy of about 82%, which is suitable for single-point measurement scenarios with moderate accuracy requirements. Analysis of measurement points indicates optimal performance using data from the engine top between cylinders 3 and 4. This approach reduces reliance on costly anechoic facilities, providing practical value for noise control and design optimization. Full article

The integration of artificial intelligence (AI) in medical imaging has revolutionized diagnostic capabilities, yet the black-box nature of deep learning models poses significant challenges for clinical adoption. Current explainable AI (XAI) approaches, including SHAP, LIME, and Grad-CAM, predominantly focus on post hoc explanations that may inadvertently undermine clinical decision-making by providing misleading confidence in AI outputs. This paper presents a systematic review and meta-analysis of 67 studies (covering 23 radiology, 19 pathology, and 25 ophthalmology applications) evaluating XAI fidelity, stability, and performance trade-offs across medical imaging modalities. Our meta-analysis of 847 initially identified studies reveals that LIME achieves superior fidelity (0.81, 95% CI: 0.78–0.84) compared to SHAP (0.38, 95% CI: 0.35–0.41) and Grad-CAM (0.54, 95% CI: 0.51–0.57) across all modalities. Post hoc explanations demonstrated poor stability under noise perturbation, with SHAP showing 53% degradation in ophthalmology applications (ρ = 0.42 at 10% noise) compared to 11% in radiology (ρ = 0.89). We demonstrate a consistent 5–7% AUC performance penalty for interpretable models but identify modality-specific stability patterns suggesting that tailored XAI approaches are necessary. Based on these empirical findings, we propose a comprehensive three-pillar accountability framework that prioritizes transparency in model development, interpretability in architecture design, and a cautious deployment of post hoc explanations with explicit uncertainty quantification. This approach offers a pathway toward genuinely accountable AI systems that enhance rather than compromise clinical decision-making quality and patient safety. Full article

Noise in Pulsar Timing Array (PTA) data is commonly modeled as a mixture of white and red noise components. While the former is related to the receivers, and easily characterized by three parameters (EFAC, EQUAD and ECORR), the latter arises from a mix of hard to model sources and, potentially, a stochastic gravitational wave background (GWB). Since their frequency ranges overlap, GWB search methods must model the non-GWB red noise component in PTA data explicitly, typically as a set of mutually independent Gaussian stationary processes having power-law power spectral densities. However, in searches for continuous wave (CW) signals from resolvable sources, the red noise is simply a component that must be filtered out, either explicitly or implicitly (via the definition of the matched filtering inner product). Due to the technical difficulties associated with irregular sampling, CW searches have generally used implicit filtering with the same power law model as GWB searches. This creates the data analysis burden of fitting the power-law parameters, which increase in number with the size of the PTA and hamper the scaling up of CW searches to large PTAs. Here, we present an explicit filtering approach that overcomes the technical issues associated with irregular sampling. The method uses adaptive splines, where the spline knots are included in the fitted model. Besides illustrating its application on real data, the effectiveness of this approach is investigated on synthetic data that has the same red noise characteristics as the NANOGrav 15-year dataset and contains a single non-evolving CW signal. Full article

Accurate monitoring of leakage in urban water supply pipelines is crucial for ensuring the safety of residential water usage. This study proposes a robust physical indicator for identifying leaks in urban water pipelines, grounded in the physical background of leakage noise sources. An integral form of the leakage source noise power spectral density is established, and a rigorous theoretical analysis leads to the development of an effective physical indicator. This indicator addresses the limitation of existing leakage detection methods that overly rely on data-driven features. Experiments were conducted to validate the effectiveness and robustness of the proposed indicator. The results show that the leakage detection models trained with physical features achieved recognition accuracies of 99.89% for Support Vector Machine (SVM) and 99.97% for eXtreme Gradient Boosting (XGBoost) in the experiments. In the field test conducted on an in-service water supply pipeline with a total length of 701 m, the recognition accuracies for SVM and XGBoost were 97.92% and 99.31%, respectively. Full article

In ultra-wideband (UWB) radio fuze architectures, the receiver serves as the core component for receiving target-reflected signals, with its performance directly determining system detection accuracy. Manufacturing tolerances and operational environments induce inherent stochastic perturbations in circuit components, causing deviations of actual parameters from nominal values. This consequently degrades the signal-to-noise ratio (SNR) of receiver outputs and compromises ranging precision. To overcome these limitations and identify critical sensitive components in the receiver, this study proposes the following: (1) A dual-channel time-domain correlated UWB fuze detection model; and (2) the integration of an asymmetric tolerance mathematical model for dual-channel correlated receivers with a Morris-LHS-Sobol collaborative strategy to quantify independent effects and coupling interactions across multidimensional parameter spaces. Simulation results demonstrate that integrating capacitors and resistors constitute the dominant sensitivity sources, exhibiting significantly positive synergistic effects. Physical simulation correlation and hardware circuit verification confirms that the proposed model and sensitivity analysis method outperform conventional approaches in tolerance resolution and allocation optimization, thereby advancing the theoretical characterization of nonlinear coupling effects between parameters. Full article

Stable crop yields require an appropriate supply of essential soil nutrients such as nitrogen (N), phosphorus (P), and potassium (K) based on the accurate diagnosis of soil nutrient status. Traditional laboratory analysis of soil nutrients is often complicated and time-consuming and does not provide real-time nutrient status. Visible–near-infrared (Vis-NIR) spectroscopy has emerged as a non-destructive and rapid method for estimating soil nutrient levels. Vis-NIR spectra reflect sample characteristics as the peak intensities; however, they are often affected by various artifacts and complex variables. Since Vis-NIR spectroscopy does not directly measure nutrient levels in soil, improving estimation accuracy is essential. For spectral preprocessing, the most important aspect is to develop an appropriate preprocessing strategy based on the characteristics of the data and identify artifacts such as noise, baseline drift, and scatter in the spectral data. Machine learning-based modeling techniques such as partial least-squares regression (PLSR) and support vector machine regression (SVMR) enhance estimation accuracy by capturing complex patterns of spectral data. Therefore, this review focuses on the use of Vis-NIR spectroscopy for evaluating soil properties including soil water content, organic carbon (C), and nutrients and explores its potential for real-time field application through spectral preprocessing and machine learning algorithms. Vis-NIR spectroscopy combined with machine learning is expected to enable more efficient and site-specific nutrient management, thereby contributing to sustainable agricultural practices. Full article

Eclipsing cataclysmic variables (CVs) are key targets for determining binary system parameters through photometric modeling, yet many of them remain poorly characterized. In this work, we present a list (catalog) of 37 confirmed eclipsing CVs selected based on high-quality and publicly available TESS photometric data. The sample includes both long-period systems (with orbital periods exceeding 4 h), such as Z Cam, U Gem, and nova-like variables, as well as a significant number of SW Sextantis stars. Selection criteria required the presence of clearly defined eclipses and sufficient signal-to-noise ratios for reliable analysis. The catalog provides a foundation for phase-folded light curve studies and future modeling efforts aimed at deriving key physical parameters such as component masses, radii, inclinations, and accretion geometries. Notably, several systems, such as V482 Cam, OZ Dra, ASASSN-14ix, and others, have no previously published physical parameters. Our list is accessible via a dedicated website, where each system will have a separate page, including data from TESS, AAVSO, and ZTF. This resource is intended to support detailed follow-up studies. It may encourage other research groups with observational and modeling expertise to contribute to the investigation of these promising but understudied systems. Full article

As the Internet of Things (IoT) expands, ensuring secure and efficient image transmission in resource-limited environments has become crucial and important. In this paper, we propose a lightweight image encryption scheme based on Elliptic Curve Cryptography (ECC), tailored for embedded and IoT applications. In this scheme, the image data blocks are mapped into elliptic curve points using a decimal embedding algorithm and shuffled to improve resistance to tampering and noise. Moreover, an OTP-like operation is applied to enhance the security while avoiding expensive point multiplications. The proposed scheme meets privacy and cybersecurity requirements with low computational costs. Classical security metrics such as entropy, correlation, NPCR, UACI, and key sensitivity confirm its strong robustness. Rather than relying solely on direct comparisons with existing benchmarks, we employ rigorous statistical analyses to objectively validate the encryption scheme’s robustness and security. Furthermore, we propose a formal security analysis that demonstrates the resistance of the new scheme to chosen-plaintext attacks and noise and cropping attacks, while the GLCM analysis confirms the visual encryption quality. Our scheme performs the encryption of a $512\times 512$ image in only 0.23 s on a 1 GB RAM virtual machine, showing its efficiency and suitability for real-time IoT systems. Our method can be easily applied to guarantee the security and the protection of lightweight data in future smart environments. Full article

Ontology technology addresses data heterogeneity challenges in Internet of Everything (IoE) systems enabled by Cyber Twin and 6G, yet the subjective nature of ontology engineering often leads to differing definitions of the same concept across ontologies, resulting in ontology heterogeneity. To solve this problem, this study introduces a hybrid ontology matching method that integrates a Recurrent Neural Network (RNN) with syntax-based analysis. The method first extracts representative entities by leveraging in-degree and out-degree information from ontological tree structures, which reduces training noise and improves model generalization. Next, a matching framework combining RNN and N-gram is designed: the RNN captures medium-distance dependencies and complex sequential patterns, supporting the dynamic optimization of embedding parameters and semantic feature extraction; the N-gram module further captures local information and relationships between adjacent characters, improving the coverage of matched entities. The experiments were conducted on the OAEI benchmark dataset, where the proposed method was compared with representative baseline methods from OAEI as well as a Transformer-based method. The results demonstrate that the proposed method achieved an 18.18% improvement in F-measure over the best-performing baseline. This improvement was statistically significant, as validated by the Friedman and Holm tests. Moreover, the proposed method achieves the shortest runtime among all the compared methods. Compared to other RNN-based hybrid frameworks that adopt classical structure-based and semantics-based similarity measures, the proposed method further improved the F-measure by 18.46%. Furthermore, a comparison of time and space complexity with the standalone RNN model and its variants demonstrated that the proposed method achieved high performance while maintaining favorable computational efficiency. These findings confirm the effectiveness and efficiency of the method in addressing ontology heterogeneity in complex IoE environments. Full article

Time series clustering finds wide application but is often limited by data quality and the inherent limitations of existing methods. Compared to high-dimensional structured data like images, the low-dimensional features of time series contain less information, and endogenous noise can easily obscure important patterns. When dealing with massive time series data, existing clustering methods often focus on mining associations between sequences. However, ideal clustering results are difficult to achieve by relying solely on pairwise association analysis in the presence of noise and information scarcity. To address these issues, we propose a framework called Patch Graph Mamba (PG-Mamba). For the first time, the spatio-temporal patterns of a single sequence are explored by dividing the time series into multiple patches and constructing a spatio-temporal graph (STG). In this graph, these patches serve as nodes, connected by both spatial and temporal edges. By leveraging Mamba-driven long-range dependency learning and a decoupled spatio-temporal graph attention mechanism, our framework simultaneously captures temporal dynamics and spatial relationships and, thus, enabling the effective extraction of key information from time series. Furthermore, a spatio-temporal adjacency matrix reconstruction loss is introduced to mitigate feature space perturbations induced by the clustering loss. Experimental results demonstrate that PG-Mamba outperforms state-of-the-art methods, offering new insights into time series clustering tasks. Across the 33 datasets of the UCR time series archive, PG-Mamba achieved the highest average rank of 3.606 and secured the most first-place rankings (13). Full article

The rapid growth of data traffic in modern communication networks has led to the development of advanced high-capacity multiplexing methods. Orbital angular momentum (OAM)–based mode division multiplexing (MDM) offers a promising scheme by utilizing the orthogonality of helical phase modes to transmit independent data streams simultaneously. In this work, we introduce a novel adjacent mode separation method exploiting OAM’s concentric intensity characteristics for free-space optical (FSO) spatial multiplexing. This method enables the detection of each OAM channel based on its distinctive ring-shaped intensity distribution, contrary to the conventional on-axis phase flattening approach. Two spatially multiplexed signals with different modes are separated by aligning its concentric intensity ring with the active area of an avalanche photodiode (APD), effectively suppressing crosstalk from adjacent modes. Experimental measurements demonstrate that our method achieves a bit-error-rate (BER) performance not exceeding the forward error correction (FEC) threshold, $3.8\times {10}^{-3}$, at up to 160 Mbps of data rate, while the conventional detection scheme fails beyond 5 Mbps. The analysis of the eye diagram confirms that our concentric-ring demultiplexing system achieves a high signal-to-noise ratio (SNR) and mode selectivity. These results support the feasibility of the proposed concentric intensity-based mode separation methodology for constructing compact, high-throughput OAM-multiplexed FSO links. Full article