Search Results (38)

The development of membranes and patches for controlled drug release to enhance therapeutic efficacy is a promising approach to addressing the challenge posed by poor adherence to pharmacological therapies for chronic diseases. In this study, we designed an electrospun polycaprolactone (PCL) nanofibrous membrane reinforced with different concentrations (0.04%, 0.05%, 0.075%, and 0.2%) of functionalized multi-walled carbon nanotubes (f-MWCNTs) intended for biomedical applications, such as transdermal devices. We characterized the resulting composites using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and dynamic mechanical analysis (DMA) to evaluate their morphology, chemical composition, and mechanical properties. We also measured their cytotoxicity upon contact with peripheral blood mononuclear cells. The nanofibers had diameters below 100 nm and inclusions of microspheres, which were attributed to the electrospinning expansion phenomenon. Spectroscopic and mechanical analyses confirmed molecular interactions between the PCL matrix and the f-MWCNTs. Finally, biological tests demonstrated that both the dispersion of f-MWCNTs and the nanofiber sizing render the membranes biocompatible, supporting their potential use as drug-delivery systems. Full article

Acne vulgaris is a chronic disease that occurs in the pilosebaceous units and ranks eighth in the global prevalence of all diseases. In its severe forms such as pustules, cysts, and nodules, acne can lead to permanent scarring and post-inflammatory hyperpigmentation, which are often difficult to reverse in the short term and significantly affect patients’ psychological well-being and social interactions. Although a variety of pharmacological treatments are available, including retinoids, antibiotics, anti-androgens, benzoyl peroxide, and corticosteroids, the high recurrence rate and limited efficacy in scar prevention highlight the urgent need for innovative therapeutic strategies. Electrospinning technology has recently gained attention for fabricating nanofibrous patches with high porosity, biocompatibility, and biodegradability. These patches can offer antibacterial activity, absorb exudates, and provide mechanical protection, making them promising platforms for acne wound care. This review first outlines the pathophysiology of acne and the biological mechanisms underlying scar formation. We then present an overview of electrospinning techniques, commonly used polymers, and recent advancements in the field. Finally, we explore the potential of electrospun nanofibers loaded with mesenchymal stem cells or exosomes as next-generation therapeutic systems aimed at promoting scarless acne healing. Full article

Background/Objectives: The work presented herein focused on the development and characterization of a transdermal caffeine platform fabricated from ultrathin micro- and submicron fibers produced via electrospinning. Methods: The formulations incorporated caffeine encapsulated in a polyethylene oxide (PEO) matrix, combined with various permeation enhancers. A backing layer made of annealed electrospun polycaprolactone (PCL) facilitated the lamination of the two layers to form the final multilayer patch. Comprehensive characterization was conducted, utilizing scanning electron microscopy (SEM) to assess the fiber morphology, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) for chemical detection and to assess the stability of the caffeine, and differential scanning calorimetry (DSC) along with wide-angle X-ray scattering (WAXS) to analyze the physical state of the caffeine within the fibers of the active layer. Additionally, Franz cell permeation studies were performed using both synthetic membranes (Strat-M) and ex vivo human stratum corneum (SC) to evaluate and model the permeation kinetics. Results: These experiments demonstrated the significant role of enhancers in modulating the caffeine permeation rates provided by the patch, achieving permeation rates of up to 0.73 mg/cm² within 24 h. Conclusions: This work highlights the potential of using electro-hydrodynamic processing technology to develop innovative transdermal delivery systems for drugs, offering a promising strategy for enhancing efficacy and innovative therapeutic direct plasma administration. Full article

Tension-free hernioplasty has effectively reduced postoperative recurrence and mitigated complications by employing polymer patches. However, clinically used polymer patches often fall short in terms of the anti-deformation, anti-adhesion, and tissue integration functions, which can result in visceral adhesions and foreign body reactions after implantation. In this study, a Janus three-layer composite patch was developed for abdominal wall defect repair using a combination of 3D printing, electrospraying, and electrospinning technologies. On the visceral side, a dense electrospun polyvinyl alcohol/sodium hyaluronate (PVA/HA) scaffold was fabricated to inhibit cell adhesion. The middle layer, composed of polycaprolactone (PCL), provided mechanical support. On the muscle-facing side, a loose and porous electrospun nanofiber scaffold was created through electrospraying and electrospinning, promoting cell adhesion and migration to facilitate tissue regeneration. Mechanical testing demonstrated that the composite patch possessed excellent tensile strength (23.58 N/cm), surpassing the clinical standard (16 N/cm). Both in vitro and in vivo evaluations confirmed the patch’s outstanding biocompatibility. Compared with the control PCL patch, the Janus composite patch significantly reduced the visceral adhesion and enhanced the tissue repair in animal models. Collectively, this Janus composite patch integrated anti-deformation, anti-adhesion, and tissue-regenerative properties, providing a promising solution for effective abdominal wall defect repair. Full article

Background/Objectives: Skin wrinkles result from a myriad of multifaceted processes involving intrinsic and extrinsic aging. To combat this effect, plant stem cells offer a renewable and eco-friendly source for various industries, including cosmeceuticals. Salvia miltiorrhiza (SM), which contains the bioactive compound Rosmarinic acid (RA) and has been proposed for its anti-wrinkle effect. Methods: In the present study, calli from SM were cultured and Quality by Design (QbD) was implemented to investigate the effect of different types and concentrations of elicitors; jasmonic acid (JA) and salicylic acid (SA). Both raised RA levels yet, jasmonic acid (50 µM) has resulted in the highest yield for RA, at 16 mg/g. A nanofiber patch was prepared and characterized in-vitro by the release percentage, drug content, swelling degree, scanning electron microscope, and surface roughness. Then, the anti-wrinkle effect of the patch was tested in a UV wrinkle-induced mouse model. Results: Interestingly, after treatment, there were visibly fewer wrinkles, and the skin was softer than in the untreated control group. This study suggests that the treatment exerted its effect through the Nrf2/Keap1 pathway, which plays a crucial role in cellular antioxidant protective processes. By activating this pathway through boosting Nrf2 and diminishing Keap1 cellular content, the nanofiber patch enhances the production of antioxidant enzymes, such as superoxide dismutase and glutathione peroxidase, enhancesglutathione, and reduces the skin lipid peroxidation, collectively indicating enhanced skin quality. Conclusions: In conclusion, this study highlights the importance of this formula as an anti-wrinkle treatment, and future clinical studies are recommended to further unveil the potential of this formula. Full article

Various electrospinning techniques can be used to produce nanofiber mats with randomly oriented or aligned nanofibers made of different materials and material mixtures. Such nanofibers have a high specific surface area, making them sensitive as sensors for health monitoring. The entire nanofiber mats are very thin and lightweight and, therefore, can be easily integrated into wearables such as textile fabrics or even patches. Nanofibrous sensors can be used not only to analyze sweat but also to detect physical parameters such as ECG or heartbeat, movements, or environmental parameters such as temperature, humidity, etc., making them an interesting alternative to other wearables for continuous health monitoring. This paper provides an overview of various nanofibrous sensors made of different materials that are used in health monitoring. Both the advantages of electrospun nanofiber mats and their potential problems, such as inhomogeneities between different nanofiber mats or even within one electrospun specimen, are discussed. Full article

The electrospinning process is an effective technique for creating micro- and nanofibers from synthetic and natural polymers, with significant potential for biomedical applications and drug delivery systems due to their high drug-loading capacity, large surface area, and tunable release times. Poly(L-lactic acid) (PLLA) stands out for its excellent thermo-mechanical properties, biodegradability, and bioabsorbability. Electrospun PLLA nanofibrous structures have been extensively investigated as wound dressings, sutures, drug delivery carriers, and tissue engineering scaffolds. This study aims to create and characterize electrospun PLLA membranes loaded with spironolactone (SP), mimicking active compounds of Ganoderma lucidum (GL), to develop a biodegradable patch for topical wound-healing applications. GL, a medicinal mushroom, enhances dermal wound healing with its bioactive compounds, such as polysaccharides and ganoderic acids. Focusing on GL extracts—obtained through green extraction methods—and innovative drug delivery, we created new fibers for wound-healing potential applications. To integrate complex mixtures of bioactive compounds into the fibers, we developed a prototype using a single pure substance representing the extract mixture. This painstaking work presents the results of the fabricating, wetting, moisture properties, material resilience, and full characterization of the product, providing a robust rationale for the fabrication of fibers imbued with more complex extracts. Full article

Introduction: In the context of the current opioid crisis, non-pharmacologic approaches to pain management have been considered important alternatives to the use of opioids or analgesics. Advancements in nano and quantum technology have led to the development of several nanotransporters, including nanoparticles, micelles, quantum dots, liposomes, nanofibers, and nano-scaffolds. These modes of nanotransporters have led to the development of new drug formulations. In pain medicine, new liposome formulations led to the development of DepoFoam™ introduced by Pacira Pharmaceutical, Inc. (Parsippany, NJ, USA). This formulation is the base of DepoDur™, which comprises a combination of liposomes and extended-release morphine, and Exparel™, which comprises a combination of liposomes and extended-release bupivacaine. In 2021, Heron Therapeutics (San Diego, CA, USA) created Zynrelef™, a mixture of bupivacaine and meloxicam. Advancements in nanotechnology have led to the development of devices/patches containing millions of nanocapacitors. Data suggest that these nanotechnology-based devices/patches reduce acute and chronic pain. Methods: Google and PubMed searches were conducted to identify studies, case reports, and reviews of medical nanotechnology applications with a special focus on acute and chronic pain. This search was based on the use of keywords like nanotechnology, nano and quantum technology, nanoparticles, micelles, quantum dots, liposomes, nanofibers, nano-scaffolds, acute and chronic pain, and analgesics. This review focuses on the role of nanotechnology in acute and chronic pain. Results: (1) Nanotechnology-based transporters. DepoDur™, administered epidurally in 15, 20, or 25 mg single doses, has been demonstrated to produce significant analgesia lasting up to 48 h. Exparel™ is infiltrated at the surgical site at the recommended dose of 106 mg for bunionectomy, 266 mg for hemorrhoidectomy, 133 mg for shoulder surgery, and 266 mg for total knee arthroplasty (TKA). Exparel™ is also approved for peripheral nerve blocks, including interscalene, sciatic at the popliteal fossa, and adductor canal blocks. The injection of Exparel™ is usually preceded by an injection of plain bupivacaine to initiate analgesia before bupivacaine is released in enough quantity from the depofoarm to be pharmacodynamically effective. Finally, Zynrelef™ is applied at the surgical site during closure. It was initially approved for open inguinal hernia, abdominal surgery requiring a small-to-medium incision, foot surgery, and TKA. (2) Nanotechnology-based devices/patches. Two studies support the use of nanocapacitor-based devices/patches for the management of acute and chronic pain. A randomized study conducted on patients undergoing unilateral primary total knee (TKA) and total hip arthroplasty (THA) provided insight into the potential value of nanocapacitor-based technology for the control of postoperative acute pain. The results were based on 2 studies, one observational and one randomized. The observational study was conducted in 128 patients experiencing chronic pain for at least one year. This study suggested that compared to baseline, the application of a nanocapacitor-based Kailo™ pain relief patch on the pain site for 30 days led to a time-dependent decrease in pain and analgesic use and an increase in well-being. The randomized study compared the effects of standard of care treatment to those of the same standard of care approach plus the use of two nanocapacitor-based device/patches (NeuroCuple™ device) placed in the recovery room and kept in place for three days. The study demonstrated that the use of the two NeuroCuple™ devices was associated with a 41% reduction in pain at rest and a 52% decrease in the number of opioid refills requested by patients over the first 30 days after discharge from the hospital. Discussion: For the management of pain, the use of nano-based technology has led to the development of nano transporters, especially focus on the use of liposome and nanocapacitors. The use of liposome led to the development of DepoDur™, bupivacaine Exparel™ and a mixture of bupivacaine and meloxicam (Zynrelef™) and more recently lidocaine liposome formulation. In these cases, the technology is used to prolong the duration of action of drugs included in the preparation. Another indication of nanotechnology is the development of nanocapacitor device or patches. Although, data obtained with the use of nanocapacitors are still limited, evidence suggests that the use of nanocapacitors devices/patches may be interesting for the treatment of both acute and chronic pain, since the studies conducted with the NeuroCuple™ device and the based Kailo™ pain relief patch were not placebo-controlled, it is clear that additional placebo studies are required to confirm these preliminary results. Therefore, the development of a placebo devices/patches is necessary. Conclusions: Increasing evidence supports the concept that nanotechnology may represent a valuable tool as a drug transporter including liposomes and as a nanocapacitor-based device/patch to reduce or even eliminate the use of opioids in surgical patients. However, more studies are required to confirm this concept, especially with the use of nanotechnology incorporated in devices/patches. Full article

This review is focused on the recent development of various chitosan-based nanofibers (membranes, patches, mats, and scaffolds) that have been designed into core and shell structures using emulsion and coaxial electrospinning techniques. Chitosan, a promising polysaccharide derived from natural sources, holds potential for diverse applications, including nanofiber production, aimed at fostering sustainability. Core/shell chitosan-based nanofibers offer appealing features, including drug encapsulation and sustained release capabilities, with a higher efficiency than uniaxial fibers. The fabrication of core/shell chitosan-based nanofibers, including the co-spinning agents and various spinning parameters, such as spinning voltage, needle size, spinning flow rate, distance from needle tip to collector, temperature, and humidity, is summarized in this work. The review also explores updated applications in various fields, such as textiles, medical dressings, drug release systems, filtration membranes, and food packaging. It highlights the current advancements in core/shell chitosan-based nanofibers produced via electrospinning techniques. The innovative insights presented in the recent literature and the challenges associated with these sustainable materials are thoroughly examined, offering valuable contributions to the field. Full article

Composite chitosan–collagen nanofibrous mats embedded with curcumin were prepared via a single-step electrospinning procedure and explored as wound-healing patches with superior biological activity. A mild crosslinking protocol consisting of a short exposure to ammonia vapor and UV radiation was developed to ensure proper stability in physiological-like conditions without affecting the intrinsic biocompatibility of chitosan and collagen. The fabricated composite patches displayed a highly porous, homogeneous nanostructure consisting of fibers with an average diameter of 200 nm, thermal stability up to 200 °C, mechanical features able to ensure protection and support to the new tissues, and water-related properties in the ideal range to allow exudate removal and gas exchange. The release kinetic studies carried out in a simulated physiological environment demonstrated that curcumin release was sustained for 72 h when the mats are crosslinked hence providing prolonged bioactivity reflected by the displayed antioxidant properties. Remarkably, combining chitosan and collagen not only ensures prolonged stability and optimal physical–chemical properties but also allows for better-promoting cell adhesion and proliferation and enhanced anti-bacteriostatic capabilities with the addition of curcumin, owing to its beneficial anti-inflammatory effect, ameliorating the attachment and survival/proliferation rates of keratinocytes and fibroblasts to the fabricated patches. Full article

Electrospun nanofiber constructs represent a promising alternative for mimicking the natural extracellular matrix in vitro and have significant potential for cardiac patch applications. While the effect of fiber orientation on the morphological structure of cardiomyocytes has been investigated, fibers only provide contact guidance without accounting for substrate stiffness due to their deposition on rigid substrates (e.g., glass or polystyrene). This paper introduces an in situ fabrication method for suspended and well aligned nanofibrous scaffolds via roller electrospinning, providing an anisotropic microenvironment with reduced stiffness for cardiac tissue engineering. A fiber surface modification strategy, utilizing oxygen plasma treatment combined with sodium dodecyl sulfate solution, was proposed to maintain the hydrophilicity of polycaprolactone (PCL) fibers, promoting cellular adhesion. Human-induced pluripotent stem cell (hiPSC)-derived cardiomyocytes (CMs), cultured on aligned fibers, exhibited an elongated morphology with extension along the fiber axis. In comparison to Petri dishes and suspended random fiber scaffolds, hiPSC-CMs on suspended aligned fiber scaffolds demonstrated enhanced sarcomere organization, spontaneous synchronous contraction, and gene expression indicative of maturation. This work demonstrates the suspended and aligned nano-fibrous scaffold provides a more realistic biomimetic environment for hiPSC-CMs, which promoted further research on the inducing effect of fiber scaffolds on hiPSC-CMs microstructure and gene-level expression. Full article

As cardiac diseases, which mostly result in heart failure, are increasing rapidly worldwide, heart transplantation seems the only solution for saving lives. However, this practice is not always possible due to several reasons, such as scarcity of donors, rejection of organs from recipient bodies, or costly medical procedures. In the framework of nanotechnology, nanomaterials greatly contribute to the development of these cardiovascular scaffolds as they provide an easy regeneration of the tissues. Currently, functional nanofibers can be used in the production of stem cells and in the regeneration of cells and tissues. The small size of nanomaterials, however, leads to changes in their chemical and physical characteristics that could alter their interaction and exposure to stem cells with cells and tissues. This article aims to review the naturally occurring biodegradable nanomaterials that are used in cardiovascular tissue engineering for the development of cardiac patches, vessels, and tissues. Moreover, this article also provides an overview of cell sources used for cardiac tissue engineering, explains the anatomy and physiology of the human heart, and explores the regeneration of cardiac cells and the nanofabrication approaches used in cardiac tissue engineering as well as scaffolds. Full article

Scaffolds made of degradable polymers, such as collagen, polyesters or polysaccharides, are promising matrices for fabrication of bioartificial vascular grafts or patches. In this study, collagen isolated from porcine skin was processed into a gel, reinforced with collagen particles and with incorporated adipose tissue-derived stem cells (ASCs). The cell-material constructs were then incubated in a DMEM medium with 2% of FS (DMEM_part), with added polyvinylalcohol nanofibers (PVA_part sample), and for ASCs differentiation towards smooth muscle cells (SMCs), the medium was supplemented either with human platelet lysate released from PVA nanofibers (PVA_PL_part) or with TGF-β1 + BMP-4 (TGF + BMP_part). The constructs were further endothelialised with human umbilical vein endothelial cells (ECs). The immunofluorescence staining of alpha-actin and calponin, and von Willebrand factor, was performed. The proteins involved in cell differentiation, the extracellular matrix (ECM) proteins, and ECM remodelling proteins were evaluated by mass spectrometry on day 12 of culture. Mechanical properties of the gels with ASCs were measured via an unconfined compression test on day 5. Gels evinced limited planar shrinkage, but it was higher in endothelialised TGF + BMP_part gel. Both PVA_PL_part samples and TGF + BMP_part samples supported ASC growth and differentiation towards SMCs, but only PVA_PL_part supported homogeneous endothelialisation. Young modulus of elasticity increased in all samples compared to day 0, and PVA_PL_part gel evinced a slightly higher ratio of elastic energy. The results suggest that PVA_PL_part collagen construct has the highest potential to remodel into a functional vascular wall. Full article

Acne vulgaris is a prevalent skin condition that is caused by an imbalance in skin microbiomes mainly by the overgrowth of strains such as Cutibacterium acnes and Staphylococcus epidermidis which affect both teenagers and adults. Drug resistance, dosing, mood alteration, and other issues hinder traditional therapy. This study aimed to create a novel dissolvable nanofiber patch containing essential oils (EOs) from Lavandula angustifolia and Mentha piperita for acne vulgaris treatment. The EOs were characterized based on antioxidant activity and chemical composition using HPLC and GC/MS analysis. The antimicrobial activity against C. acnes and S. epidermidis was observed by the determination of the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The MICs were in the range of 5.7–9.4 μL/mL, and MBCs 9.4–25.0 μL/mL. The EOs were integrated into gelatin nanofibers by electrospinning and SEM images of the fibers were taken. Only the addition of 20% of pure essential oil led to minor diameter and morphology alteration. The agar diffusion tests were performed. Pure and diluted Eos in almond oil exhibited a strong antibacterial effect on C. acnes and S. epidermidis. After incorporation into nanofibers, we were able to focus the antimicrobial effect only on the spot of application with no effect on the surrounding microorganisms. Lastly, for cytotoxicity evaluation, and MTT assay was performed with promising results that samples in the tested range had a low impact on HaCaT cell line viability. In conclusion, our gelatin nanofibers containing EOs are suitable for further investigation as prospective antimicrobial patches for acne vulgaris local treatment. Full article

The extraordinary material graphene arrived in the fields of engineering and science to instigate a material revolution in 2004. Graphene has promptly risen as the super star due to its outstanding properties. Graphene is an allotrope of carbon and is made up of sp²-bonded carbon atoms placed in a two-dimensional honeycomb lattice. Graphite consists of stacked layers of graphene. Due to the distinctive structural features as well as excellent physico-chemical and electrical conductivity, graphene allows remarkable improvement in the performance of electrospun nanofibers (NFs), which results in the enhancement of promising applications in NF-based sensor and biomedical technologies. Electrospinning is an easy, economical, and versatile technology depending on electrostatic repulsion between the surface charges to generate fibers from the extensive list of polymeric and ceramic materials with diameters down to a few nanometers. NFs have emerged as important and attractive platform with outstanding properties for biosensing and biomedical applications, because of their excellent functional features, that include high porosity, high surface area to volume ratio, high catalytic and charge transfer, much better electrical conductivity, controllable nanofiber mat configuration, biocompatibility, and bioresorbability. The inclusion of graphene nanomaterials (GNMs) into NFs is highly desirable. Pre-processing techniques and post-processing techniques to incorporate GNMs into electrospun polymer NFs are precisely discussed. The accomplishment and the utilization of NFs containing GNMs in the electrochemical biosensing pathway for the detection of a broad range biological analytes are discussed. Graphene oxide (GO) has great importance and potential in the biomedical field and can imitate the composition of the extracellular matrix. The oxygen-rich GO is hydrophilic in nature and easily disperses in water, and assists in cell growth, drug delivery, and antimicrobial properties of electrospun nanofiber matrices. NFs containing GO for tissue engineering, drug and gene delivery, wound healing applications, and medical equipment are discussed. NFs containing GO have importance in biomedical applications, which include engineered cardiac patches, instrument coatings, and triboelectric nanogenerators (TENGs) for motion sensing applications. This review deals with graphene-based nanomaterials (GNMs) such as GO incorporated electrospun polymeric NFs for biosensing and biomedical applications, that can bridge the gap between the laboratory facility and industry. Full article