Search Results (90)

Shale plays with pre-existing natural fractures can yield significant production when operating horizontal wells with multi-stage hydraulic fracturing (HWMHF). This work proposes a general, robust, and integrated framework for estimating optimal HWMHF design parameters in an unconventional naturally fractured oil reservoir. This work considers uncertainty in both the distribution of the natural fractures and uncertainty in three geo-mechanical parameters: the internal friction factor, the cohesion coefficient, and the tensile strength. Because a maximum of five design variables is considered, it is appropriate to apply derivative-free algorithms. This work considers versions of the genetic algorithm (GA), particle swarm optimization (PSO), and general pattern search (GPS) algorithms. The forward model consists of two linked software programs: a geo-mechanical simulator and an unconventional shale oil simulator. The two simulators run sequentially during the optimization process without human intervention. The in-house geo-mechanical simulator model provides sufficient computational efficiency so that it is feasible to solve the robust optimization problem. An embedded discrete fracture model (EDFM) is implemented to model large-scale fractures. Two cases strongly verified the feasibility of the framework for the optimization of HWMHF, and the average comprehensive NPV increases by 35% and 102.4%, respectively. By comparison, the pattern search algorithm is more suitable for HWMHF optimization. In this way, oil and gas scientists are contributing to the energy industry more accurately and resolutely. Full article

Geothermal energy has the advantages of being green, stable, abundant, and renewable. The thermal energy extraction efficiency of an enhanced geothermal system (EGS) is significantly regulated by Thermo–Hydraulic (TH) processes. To accurately evaluate the long-term heat recovery performance of an EGS, the dynamic influence mechanisms under multi-field TH coupling effects must be considered comprehensively. Therefore, in this study, based on the local thermal equilibrium theory, a temperature–seepage coupling model is established using the COMSOL software. The influences of reservoir parameters and fractures on the geothermal energy mining effect are studied, and the distribution law of temperature and pressure in the thermal reservoir is analyzed. The research results provide a reference for EGS reservoir reconstruction and heat recovery efficiency optimization. It is shown that the temperature difference near the injection–production well in the early stage of development leads to the slow recovery of thermal reservoir pressure. When the matrix permeability is greater than 455 mD, the temperature of the production fluid drops too quickly, and the development life of the thermal reservoir is short. The matrix porosity has little effect on the development of thermal reservoirs. When the porosity increases from 0.05 to 0.3, after 40 years of production, the mass flow rate of the produced fluid increases by 3.08%, the temperature of the produced fluid increases by 2.14%, and the heat recovery rate increases by 7.04%. The number of fractures has a significant influence on the development of thermal reservoirs. When the number of fractures increases from 0 to 3, the mass flow rate of production fluid increases by 55.9%, the thermal breakthrough is rapid, and the development life of the thermal reservoir is shortened. Notably, the unreasonable use of cracks will hinder the outward spread of the injected fluid. Full article

Optimizing well spacing is crucial for enhancing the production efficiency and economic returns of tight oil development. The limited understanding of hydraulic fracture geometry and properties poses significant challenges in designing well spacing for tight oil reservoirs. In this study, we proposed an integrated workflow for optimizing well spacing in tight oil reservoirs. Geological and geomechanical models were established to form the basis for numerical reservoir simulation and dynamic fracture modeling. A multi-staged, multi-clustered fracture propagation simulation of horizontal wells was conducted by a hydraulic fracturing simulator with matched actual field pumping schedules. The differences between fracture propagation simulation results and field monitoring results, including micro-seismic testing and distributed temperature sensing (DTS) monitoring, were analyzed. The geological model and fracture propagation simulation results were integrated into an efficient numerical reservoir simulator. A material balance method for fracturing fluids leak-off was proposed and utilized to equivalently calculate the actual oil–water distribution after fracturing and to complete the historical matching water cuts of all wells. Subsequently, the inter-well drainage area and pressure interference were evaluated. By employing this integrated workflow, the production performance of six wells (three well pairs) at different well spacings was simulated over a 15-year period, and their estimated ultimate recoveries (EURs) were predicted. When well spacing was less than the optimal distance, oil production dropped significantly. Ultimately, it was determined that reasonable well spacing for this block was 250 m. In future well pattern designs, well spacing smaller than the current value should be used. Full article

Multi-stage hydraulic fracturing is a widely used technology in the development of shale oil and gas reservoirs that creates artificial fractures and forms fracture networks that enhance fluid flow within reservoirs. A well-designed fracture network can significantly enhance the production performance of oil and gas wells, thereby improving the recovery of shale oil and gas reservoirs. To achieve this, understanding the gas production performance of individual artificial fractures is crucial, as it provides valuable insights for refining subsequent fracturing designs, ultimately leading to an optimized fracture network design. At present, numerical simulations are commonly used to study the production performance of individual artificial fractures by modeling the production process of the entire shale oil and gas reservoir. However, due to the heterogeneity of reservoirs and the presence of numerous natural fractures, traditional numerical simulations require high-resolution grids to model the production process, making them computationally expensive and time-consuming. To address this issue, in this work, based on the concept of diffusive time of flight (DTOF), the authors propose a fast simulation method to efficiently simulate the production behavior of individual artificial fractures throughout the shale oil and gas reservoir production process. The DTOF can be obtained by solving the Eikonal equation using the fast marching method (FMM), which is then used to calculate the drainage volume of individual artificial fractures. Subsequently, a geometric approximation of the drainage volume is used to efficiently compute the production rates of individual artificial fractures. Unlike traditional numerical simulations, this method uses a single non-iterative calculation to determine the drainage volume of individual artificial fractures, followed by a geometric approximation to compute the production rates. This eliminates the need for high-resolution grids, significantly reducing computational cost and time, which allows the proposed method to provide faster simulations compared to traditional numerical methods while maintaining sufficient accuracy. Full article

Multi-stage hydraulic fracturing is a key technology adopted in the energy industry to make shale gas and shale oil fields profitable. Post-frac fluid soaking before putting wells into production has been found essential for enhancing well productivity. Finding the optimum time to terminate the fluid-soaking process is an open problem to solve. Post-frac shut-in pressure data from six wells in two shale gas fields were investigated in this study based on pressure transient analysis (PTA) to reveal fluid-soaking performance. It was found that pressure-derivative data become scattering after 1 day of well shut in. The overall trend of pressure-derivative data after the first day of well shut in should reflect the effectiveness of fluid soaking. Two wells exhibited flat (zero-slope) pressure derivatives within one week of fluid soaking, indicating adequate time of fluid soaking. Four wells exhibited increasing pressure derivatives within one week of fluid soaking, indicating inadequate time of fluid soaking. This observation is consistent with the reported well’s Estimated Ultimate Recovery (EUR). This study presents a new approach to the assessment of post-frac fluid-soaking performance with real-time shut-in pressure data. Full article

Shale oil reservoirs are characterized by extremely low porosity and permeability, necessitating the utilization of multi-fractured horizontal wells (MFHWs) for their development. Additionally, the complex phase behavior and desorption effect of two-phase fluids make the fluid flow characteristics of shale oil reservoirs exceptionally intricate. However, there are no productivity models for MFHWs in shale oil reservoirs that incorporate the complex hydraulically fractured networks, the oil–gas desorption effect, and the phase change of oil and gas. In this study, we propose a novel productivity model for MFHWs in shale oil reservoirs that incorporates these complex factors. The conformal transformation, fractal theory, and pressure superposition principle are used to establish and solve the proposed model. The proposed model has been validated by comparing its predicted results with the field data and numerical simulation results. A detailed analysis is conducted on the factors that influence the productivity of shale oil wells. It is found that the phase behavior results in a significant 33% reduction in well productivity, while the fluid desorption leads to a significant 75% increase in well productivity. In summary, the proposed model has demonstrated promising practical applicability in predicting the productivity of MFHWs in shale oil reservoirs. Full article

Natural gas hydrates (NGHs) in the Shenhu area of the South China Sea are deposited in low-permeability clayey silt sediments. As a renewable energy source with such a low carbon emission, the exploitation and recovery rate of NGH make it difficult to meet industrial requirements using existing development strategies. Research into an economically rewarding method of gas hydrate development is important for sustainable energy development. Hydraulic fracturing is an effective stimulation technique to improve the fluid conductivity. In this paper, an efficient three-dimensional embedded discrete fracture model is developed to investigate the production simulation of hydraulically fractured gas hydrate reservoirs considering the stimulated reservoir volume (SRV). The proposed model is applied to a hydraulically fractured production evaluation of vertical wells, horizontal wells, and complex structural wells. To verify the feasibility of the method, three test cases are established for different well types as well as different fractures. The effects of fracture position, fracture conductivity, fracture half-length, and stimulated reservoir volume size on gas production are presented. The results show that the production enhancement in multi-stage fractured horizontal wells is obvious compared to that of vertical wells, while spiral multilateral wells are less sensitive to fractures due to the distribution of wellbore branches and perforation points. Appropriate stimulated reservoir volume size can obtain high gas production and production efficiency. Full article

Hydraulic fracturing has enabled production from unconventional reservoirs in the U.S., but production rates often decline sharply, limiting recovery factors to under 10%. This study proposes an optimization workflow for the CO₂ huff-n-puff process for multistage-fractured horizontal wells in the Wolfcamp A formation in the Delaware Basin. The potential for enhanced oil recovery and CO₂ sequestration simultaneously was addressed using a coupled geomechanics–reservoir simulation. Geomechanical properties were derived from a 1D mechanical earth model and integrated into reservoir simulation to replicate hydraulic fracture geometries. The fracture model was validated using a robust production history matching. A fluid phase behavior analysis refined the equation of state, and 1D slim tube simulations determined a minimum miscibility pressure of 4300 psi for CO₂ injection. After the primary production phase, various CO₂ injection rates were tested from 1 to 25 MMSCFD/well, resulting in incremental oil recovery ranging from 6.3% to 69.3%. Different injection, soaking and production cycles were analyzed to determine the ideal operating condition. The optimal scenario improved cumulative oil recovery by 68.8% while keeping the highest CO₂ storage efficiency. The simulation approach proposed by this study provides a comprehensive and systematic workflow for evaluating and optimizing CO₂ huff-n-puff in hydraulically fractured wells, enhancing the recovery factor of unconventional reservoirs. Full article

Shale gas reservoirs with nanoporous media have become one of the primary resources for natural gas development. The nanopore diameters of shale reservoirs range from 5 to 200 nm, with permeability ranging from 1 × 10⁻⁹ to 1 × 10⁻⁶ μm². The natural gas production from shale gas reservoirs is low, necessitating the use of multi-stage hydraulic fracturing in horizontal wells. Segmented multi-cluster perforation fracturing is an effective method for shale gas extraction in these wells. The number of clusters significantly impacts the productivity of horizontal wells. Therefore, it is essential to analyze the impact of cluster numbers on fracture productivity in shale gas reservoir development. In this study, the equivalent flow resistance method was applied to establish a productivity model for multi-stage hydraulic fracturing horizontal wells in shale gas reservoirs considering diffusion and slip. An approximate analytical solution was obtained, and the effects of cluster length, diffusion coefficient, and fracture network permeability on productivity were analyzed. The results show that gas production gradually increases with the increase in the number of clusters and cluster length. However, as the number of clusters increases, the interference between clusters leads to a decrease in the productivity of individual clusters. As the fracture permeability, fracture network permeability, and diffusion coefficient increase, shale gas production also gradually increases. The permeability of the fracture network has the greatest impact on productivity. These research results are beneficial for the design of clusters in horizontal well fracturing and are of great importance for the development and production of shale gas reservoirs. Full article

The proficient application of multistage fracturing methods enhances the status of the Duvernay shale formation as a highly esteemed shale reservoir on a global scale. Nevertheless, the challenge is in accurately characterizing unconventional fracture behavior and predicting shale productivity due to the complex distributions of natural fractures, pre-existing faults, and reservoir heterogeneity. The present study puts forth a Geo-Engineering approach to comprehensively investigate the Duvernay shale reservoir in the vicinity of Crooked Lake. To begin with, on the basis of the experimental results and well-logging interpretations, a high-quality petrophysical and geomechanical model is constructed. Subsequently, the establishment of an unconventional fracture model (UFM) takes into account the heterogeneity of the reservoir and the interactions between hydraulic fractures and pre-existing natural fractures/faults and is further validated by 18,040 microseismic events. Finally, the analysis of well productivity is conducted by numerical simulations, revealing that the agreement between the simulated and observed production magnitudes exceeds 89%. This paper will guide the efficient development of increasingly important unconventional shale resources. Full article

The relevance of the technical and economic evaluation of the application of enhanced oil recovery methods at oil fields at the final stage of development is related to the need to recover the remaining reserves, including hard-to-recover (HTR) reserves, the share of which is growing annually. Currently, there are many effective enhanced oil recovery (EOR) methods for different process conditions, but their application has different effects based on the combination of methods, techniques and production conditions. The aim of this study was to approach the scaling of the effect of the application of modern EOR using the methodology of the clustering of wells with similar technological characteristics. This paper proposes a methodology for the selection of candidate wells to form clusters based on a set of indicators that determine the choice of enhanced oil recovery technology in oil fields at the final stage. The technological efficiency of sidetracking and multistage hydraulic fracturing application was evaluated based on the analytical method of well flow rate estimation. By applying cluster analysis to selected wells, three clusters were formed, each including three wells, united by the geological properties of their reservoir rocks and the filtration–capacitive properties of the oil. After this, the optimal technologies were selected for two clusters—hydraulic fracturing and sidetracking. The accumulated oil production, recovered due to the application of the technologies, from six wells for the first 7 years after the operation was estimated at 306.92 thousand tons of oil. Due to the achieved technological effect, the economic efficiency of the development of the studied oil field will increase due to the proceeds from the sales of the extracted additional oil. The results of this study can be used in the calculation of technical and economic efficiency at oil fields with similar conditions. Full article

Inter-well frac-hit has become an important challenge in the development of unconventional oil and gas resources such as fractured tight sandstone. Due to the presence of hydraulic fracturing fractures, secondary induced fractures, natural fractures, and other seepage media in real formations, the acquisition of stress fields requires the coupling effect of seepage and stress. In this process, there is also stress sensitivity, which leads to unclear dynamic evolution laws of stress fields and increases the difficulty of the staged multi-cluster fracturing of horizontal wells. The use of a multi-stage stress-sensitive horizontal well production stress field prediction model is an effective means of analyzing the influence of natural fracture parameters, main fracture parameters, and multi-stage stress sensitivity coefficients on the stress field. This article considers multi-stage stress sensitivity and, based on fractured sandstone reservoir parameters, establishes a numerical model for the dynamic evolution of the production stress field in horizontal wells with matrix self-supporting fracture-supported fracture–seepage–stress coupling. The influence of various factors on the production stress field is analyzed. The results show that under constant pressure production, for low-permeability reservoirs, multi-stage stress sensitivity has a relatively low impact on reservoir stress, and the amplitude of principal stress change in the entire fracture length direction is only within the range of 0.27%, with no significant change in stress distribution; The parameters of the main fracture have a significant impact on the stress field, with a variation amplitude of within 2.85%. The ability of stress to diffuse from the fracture tip to the surrounding areas is stronger, and the stress concentration area spreads from an elliptical distribution to a semi-circular distribution. The random natural fracture parameters have a significant impact on pore pressure. As the density and angle of the fractures increase, the pore pressure changes within the range of 3.32%, and the diffusion area of pore pressure significantly increases, making it easy to communicate with the reservoir on both sides of the fractures. Full article

Radial wellbore fracturing is a promising technology for stimulating tight sandstone reservoirs. However, simultaneous fracturing of multiple radial wellbores often leads to unsuccessful treatments. This paper proposes a novel technology called multi-stage radial wellbore fracturing (MRWF) to address this challenge. A numerical model based on the finite element/meshfree method is established to investigate the effects of various parameters on the fracture propagation of MRWF, including the azimuth of the radial wellbore, the horizontal stress difference, and the rock matrix permeability. The results show that previously created fractures have an attraction for subsequently created fractures, significantly influencing fracture propagation. A conceptual model is proposed to explain the variations in the fracture propagation of MRWF, highlighting three critical effect factors: the attraction effect, the orientation effect of the radial wellbore, and the deflection effect of the maximum horizontal principal stress. Fracture geometry is quantitatively assessed through the deviation distance, which indicates the radial wellbore’s ability to guide fracture propagation along its axis. As the azimuth increases, the deviation distances can either increase or decrease, depending on the specific radial wellbore layouts. Decreasing the horizontal stress difference and increasing the rock matrix permeability both increase the deviation distance. Full article

When multiple elements come together, hydraulic concrete develops cracks of varying widths, which huts the dependability of buildings. Therefore, with pertinent tools or procedures, swiftly ascertaining the safety status of hydraulic concrete cracks under diverse service conditions is required by conducting a quantitative and qualitative analysis of the elements influencing the onset of cracks. This paper took the safety status of hydraulic concrete cracks as the main body of research; every step of hydraulic conservation infrastructure from the ground up—design stage, construction process, operation environment, and impoundment operation—was thoroughly examined. After establishing a multi-dimensional and multi-level system for the safety status evaluation of hydraulic concrete cracks, the subjective exponential AHP and objective CRITIC method were employed to determine the weight of each factor. Then, the two weights were processed using an enhanced combination assignment method to produce a more scientifically developed combination weight. Furthermore, fuzziness and randomness were considered in the quantitative analysis thanks to integrating cloud theory and extension matter elements. In order to determine the safety evaluation findings for hydraulic concrete fractures, the maximum membership principle and the cloud picture were employed. The conclusion reached after using this method to evaluate Dianzhan Dam was that the crack had a safety grade of III, meaning that it greatly impacted the reliability of the dam, and called for prompt acceptance or repair measures to improve building efficiency and safety. Full article

The efficient development of tight gas reservoirs is significantly enhanced by multi-stage and multi-cluster fracturing techniques in conjunction with horizontal well technology, leading to substantial increases in reservoir drainage volume and individual well productivity. This study presents a tailored fine-fracturing approach for horizontal wells in tight gas reservoirs, supported by a gas–water two-phase numerical simulation model. Utilizing the orthogonal experimental design method, we simulated and optimized various fracture distribution schemes to refine fracturing parameters for maximum efficiency. The optimization was further validated through a comparison with actual well completion and development dynamics. The quantitative results highlight the optimal fracture distribution for horizontal wells, with a horizontal section length of 1400 to 1600 m and 14 to 16 fracturing stages. The pattern features a “dense at both ends and sparse in the middle” strategy, with stage spacing of 80 to 110 m, and a “longer in the middle and shorter at both ends” fracture half-length of 100 to 140 m, achieving a fracture conductivity of 30 μm²·cm. To ensure the economic feasibility of the proposed fracturing strategy, we conducted an economic evaluation using the net present value (NPV) method, which confirmed the robustness of the optimization outcomes in terms of both technical performance and economic viability. The reliability of these optimization outcomes has been confirmed through practical application in the development of horizontal wells in the study area. This research approach and methodology can provide theoretical guidance for the design of hydraulic fracturing operations and the integration of geological and engineering practices in similar unconventional oil and gas reservoirs. Full article