Search Results (46)

Seawater desalination has become a critical approach to mitigating the global scarcity of freshwater resources. This study aims to comprehensively review desalination methods based on thermal and electromagnetic methods, examining their processes, benefits, and limitations. Thermal methods include multi-stage flash distillation, multi-effect distillation, thermal vapor compression, and mechanical vapor compression. These techniques rely on evaporation and distillation to remove salts and are effective in treating highly saline water. However, they consume large amounts of energy and are prone to problems such as limescale and corrosion. In contrast, electromagnetic-based technologies represent a novel, promising approach for enhancing desalination performance. Electromagnetic fields contribute to improved membrane performance and equipment longevity by modulating ionic behavior and mitigating surface fouling. Empirical studies suggest that such interventions can lead to reduced energy usage and lower rates of mineral deposition. The findings reviewed here suggest that integrating thermal and electromagnetic techniques may offer a viable pathway toward more sustainable, efficient, and reduced environmental impacts. Full article

This paper presents an analysis of the impact of full and partial curfews on water demand and production, as imposed in Kuwait during the meteorological spring (March, April, and May) of 2020, in response to the COVID-19 pandemic. We consider all desalination technologies used in Kuwait: Multi-Stage Flash (MSF), Multi-Effect Thermal Vapor Compression (MED-TVC), and Reverse Osmosis (RO). Historical data and predictive models are combined and analyzed via a statistical genetic algorithm. The environmental and economic implications of the lockdown measures were assessed through quantitative evaluation, comparing actual 2020 water demand and production data with values predicted under normal operating conditions. During the 2020 COVID-19 pandemic, water consumption surged, with maximum daily consumption climbing by 3.6%, and average daily consumption by 5.2%. These values were significant increases relative to 2019, for which the corresponding figures were 2.1% and 1.6%. The study assesses the economic and environmental consequences quantitatively, specifically the increase in CO, CO₂, and NO_x emissions, due to the increase in fuel consumption at desalination and power plants. Water demand and production across the national water network were simulated using mathematical models specifically designed for this purpose, developed from data provided by the Meteorological Department of Civil Aviation and the Ministry of Electricity, Water, and Renewable Energy. Full article

This paper examines the application of artificial intelligence (AI) in desalination. The study explored AI techniques, including machine learning, neural networks, and genetic algorithms, to enhance system efficiency and reduce energy costs. Case studies assessed the impact of AI on desalination systems, including those powered by renewable energy sources. Key findings revealed that AI-driven systems improved water quality, reduced energy consumption by up to 50%, and enabled predictive maintenance, minimizing downtime. Challenges in integrating AI with renewable energy-powered water treatment and desalination systems were addressed by analyzing hybrid setups combining solar, wind, and battery storage with reverse osmosis (RO) and multi-stage flash (MSF) technologies. These systems demonstrated critical improvements in energy efficiency, making desalination more viable for arid and remote areas. Fault detection algorithms and predictive maintenance emerged as pivotal AI applications, significantly reducing maintenance costs and enhancing reliability. This study was concluded by identifying challenges such as the intermittent nature of renewable energy and the complexities of designing scalable hybrid AI systems. Future research should further refine AI techniques, advancing sustainable and energy-efficient water treatment solutions. Full article

This work develops a comprehensive review of the main conventional and emerging desalination processes. It presents the state of knowledge of the most known and investigated techniques, highlights their advantages and drawbacks, and draws appropriate conclusions on their respective performances from various angles including their energy consumption and efficiency, environmental impacts, reliability, and flexibility in operations. This review reveals the recent large dominance and deployment of the reverse osmosis technology in the Gulf countries, mainly in Saudi Arabia; the importance of hybridization; and the slow penetration of promising processes including membrane distillation and forward osmosis into the industrial desalination market. In addition, this work aims to develop some comparison exercises between these processes using specific criteria. A cross approach allowing an easier comparison between various desalination processes could help identify the advantages and drawbacks of each technology and select the appropriate process. Therefore, various criteria allowing a clear picture to be drawn of the performance and capabilities of the main conventional and emerging desalination processes have been proposed in the frame of sustainable development. As an illustration of this general approach from sustainability prospects and considering specific weights for each proposed criterion for the case of Saudi Arabia, a comparison exercise reveals that the superiority of reverse osmosis (RO) is confirmed. Multiple effect distillation (MED) and membrane distillation (MD) processes are potentially competitive to RO while multi-stage flash (MSF) comes last due to several drawbacks. Full article

This work presents a novel trigeneration system for the simultaneous production of desalinated water, electrical energy, and cooling, addressing the challenges of water scarcity and climate change through an integrated and efficient approach. The proposed system combines an 8-stage Multi Stage Flash Distillation (MSF) process with a 6-effect Multiple Effect Distillation (MED) process, complemented by an expander-generator to optimize steam utilization. Cooling production is achieved through a dual ejectocondensation mechanism, which enhances energy recovery and expands operational flexibility. The system’s performance was analyzed using Aspen Plus simulations, demonstrating technical feasibility across a broad operating range: 28.3 to 0.8 kPa and 68 to 4 °C. In cogeneration mode, the system achieves a Performance Ratio (PR) of 12.06 and a Recovery Ratio (RR) of 54%, producing 67,219.2 L/day of desalinated water and reducing electrical consumption by 12.03%. In trigeneration mode, it achieves a PR of 17.81 and an RR of 80%, with a cooling capacity of 1225 kW, generating 99,273.6 L/day of desalinated water while reducing electrical consumption by 3.69%. These results underscore the system’s capability to significantly enhance the efficiency and capacity of thermal desalination technologies, offering a sustainable and high-performing solution for coastal communities worldwide. Full article

Green hydrogen, produced by water electrolysis using renewable energy sources (RES), is an emerging technology that aligns with sustainable development goals and efforts to address climate change. In addition to energy, electrolyzers require ultrapure water to operate. Although seawater is abundant on the Earth, it must be desalinated and further purified to meet the electrolyzer’s feeding water quality requirements. This paper reviews seawater purification processes for electrolysis. Three mature and commercially available desalination technologies (reverse osmosis, multiple-effect distillation, and multi-stage flash) were examined in terms of working principles, performance parameters, produced water quality, footprint, and capital and operating expenditures. Additionally, pretreatment and post-treatment techniques were explored, and the brine management methods were investigated. The findings of this study can help guide the selection and design of water treatment systems for electrolysis. Full article

Selecting the appropriate desalination and renewable energy technologies is crucial for the success of desalination projects, as each technology offers distinct advantages and disadvantages tailored to specific project requirements. This research investigates the application of both the analytic hierarchy process and fuzzy logic techniques to develop four decision-making models: two for selecting the optimal desalination technology and two for selecting the optimal renewable energy technology in coastal communities. For desalination technology selection, the analytic hierarchy process model is structured into four hierarchical levels: the main goal, criteria, sub-criteria, and alternatives. The criteria level encompasses four groups, while the sub-criteria level comprises 26 factors. The alternatives considered are reverse osmosis, electrodialysis, and multi-stage flash. In parallel, the analytic hierarchy process model for renewable energy technology selection is similarly structured, with four criteria groups and 24 sub-criteria factors. The alternatives evaluated include photovoltaic, concentrated solar power, and wind energy. Additionally, fuzzy logic models are developed for both desalination and renewable energy technology selection. These models enhance the decision-making framework by incorporating the uncertainty and vagueness that are inherent in real-world scenarios. The integration of analytic hierarchy process and fuzzy logic methodologies provide a robust approach to identifying optimal technologies, thereby supporting sustainable development in Egypt’s water–energy nexus. The research outcomes highlight the effectiveness of integrating analytic hierarchy process and fuzzy logic in decision-making processes, offering decision-makers systematic and reliable approaches for selecting the most suitable technologies to achieve sustainability in water–energy nexus projects. The results of the research indicate that the best alternative for desalination was reverse osmosis, and for renewable energy was photovoltaics. Full article

The technique of multi-stage desalination with brine recirculation (MSF-BR) is characterized by its high energy demand, necessitating the exploration of efficient operational methods to minimize energy consumption and enhance plant performance. In this research study, Matlab R2021a software was used to apply a genetic algorithm with the aim of determining the optimal values of the operating variables of the MSF-BR system within certain limits, considering energy consumption and feed seawater temperature variation. The study included improving several operational factors, including top brine temperature, steam temperature, feed seawater temperature, cooling water flow rate and make up flow rate, number of station stages, and the stages of the heat rejection section. The optimal maintenance period during the operational year was also determined. The results of the analysis were based on data from the Al-Khafji desalination plant, which consists of 16 stages and has a production capacity of 7,053,393.8 gallons/day. The study aimed to achieve two main objectives: increasing the gain output ratio (GOR) and reducing the proportion of the recovery ratio. The results showed that the optimal period for maintenance is January, where the performance ratio ranges between 0.987 and 9.38, compared to the currently used month of December, where the performance ratio ranges between 1.096 and 9.56. Optimal target values were set at the following operating parameters: 33.3 °C for feed seawater temperature, 98.67 °C for steam temperature, 95.62 °C for brine temperature, 1571.18 kg/s for cooling water flow rate, 1624.24 kg/s for feed water flow rate, 21 stages for the station, and two stages for the heat rejection section. To achieve the highest GOR, the number of stages and heat rejection section should be more than 19 and 2, respectively. In general, to achieve improvements in GOR and reduce energy consumption, it is recommended to maintain Tf in the range of 33–34 °C and set M_cw between 1050 and 1800 kg/s. Full article

Water scarcity poses significant challenges in arid regions like the Middle East and North Africa (MENA) due to constant population growth, considering the effects of climate change and water management aspects. The desalination technologies face problems like high energy consumption, high investment costs, and significant environmental impacts by brine discharge. This paper researches the relationships among water scarcity, energy-intensive desalination, and the development of renewable energy in MENA, with a particular focus on the Gulf Cooperation Council (GCC) countries. It examines innovations in solar-powered desalination, considering both solar photovoltaic (PV) and solar thermal technologies, in combination with traditional thermal desalination methods such as multi-effect distillation (MED) and multi-stage flash (MSF). The environmental impacts associated with desalination by brine discharge are also discussed, analyzing innovative technological solutions and avoidance strategies. Utilizing bibliometrics, this report provides a comprehensive analysis of scientific literature for the assessment of the research landscape in order to recognize trends in desalination technologies in the MENA region, providing valuable insights into emerging technologies and research priorities. Despite challenges such as high initial investment costs, technical complexities, and limited funding for research and development, the convergence of water scarcity and renewable energy presents significant opportunities for integrated desalination systems in GCC countries. Summarizing, this paper emphasizes the importance of interdisciplinary approaches and international collaboration by addressing the complex challenges of water scarcity and energy sustainability in the MENA region. By leveraging renewable energy sources and advancing desalination technologies, the region can achieve water security while mitigating environmental impacts and promoting economic development. Full article

This study investigated the energy requirement for running desalination units coupled to cogeneration plants. Various cogeneration systems were explored using power- and heat-allocated approaches. The specific work and heat necessary for operating different desalination systems were determined. The investigation revealed that the specific work and heat remain consistent regardless of the desalination daily capacity. It was observed that the energy demand for operating a desalination system mainly relies on power plant efficiency. The investigation revealed that the energy demand for a plain multi-effect desalination system was lower than that for multi-effect desalination with thermal vapor compression. Additionally, the energy requirement for a multi-effect desalination system with preheaters was lower than that for plain multi-effect desalination. Comparisons also indicated that the energy demand of multi-stage flash exceeds that of different multi-effect desalination systems. Based on the primary thermal energy input, a universal performance ratio was used to evaluate the desalination unit performance. Furthermore, a new correlation was proposed to predict the universal performance ratio. Full article

Increasing attention is being given to reduce the specific energy consumption in desalination processes, which translates into greater use of exergy analysis. An exergetic analysis provides relevant information related to the influence of the efficiency of a single component in the global plant performance and in the exergy cost of the product. Therefore, an exergy analysis identifies the main improvement potentials in a productive thermodynamic process. Related to desalination technologies, many previous papers deal with the calculation of the parameters involved in the exergy analysis, the exergetic efficiency of different processes, plants, and technologies among them. However, different approaches for formulating the exergetic efficiency have been suggested in the literature, often without sufficient understanding and consistency. In this work, these formulations, applied to the main desalination components and processes, are compared and critically reviewed. Two definitions of exergy efficiency are applied to the desalination components of the three main thermal desalination processes (multieffect distillation–thermal vapour compression, multistage flash distillation, and direct-contact membrane distillation). The results obtained for the exergy efficiency of the MED-TVC, MSF, and DCMD processes for the input–output approach are 21.35%, 17.08%, and 1.28%, respectively, compared to the consumed–produced approach that presented 3.1%, 1.58%, and 0.37%, respectively. The consumed–produced approach seems to better fit the thermodynamic behaviour of thermal desalination systems. Full article

Desalination plants, which provide drinking water for residents, rely on electricity generated by fossil fuels. However, the excessive use of fossil fuels leads to their rapid depletion and has detrimental effects on the environment. Thus, the use of renewable energy resources in water desalination has gained popularity. The current research investigates the integration of renewable energy systems with seawater and brackish water desalination technologies. In this regard, three primary renewable energy sources—wind, solar, and geothermal—are selected. Accordingly, a thorough investigation of the related research published and the trend of evolutions between 2013 and 2023 is carried out for Reverse Osmosis (RO), Multistage flash (MSF), and Multi-effect distillation (MED)-based water desalination facilities coupled with renewable energy sources. In our investigation, we particularly focus on performance indicators, energy efficiency, economic factors, and environmental effects. Also, the associated challenges of these hybrid systems, such as technological complexity, unpredictability, and intermittency, are addressed. Prospects for the future that address these issues and the prospects of using renewable energy in water desalination technologies are also covered. Full article

A lot of research has been carried out to improve the sustainability of seawater desalination. Despite progress, relatively few studies have analyzed the sustainability of seawater desalination processes integrated on two fronts, i.e., (i) process integration and (ii) energy integration. In addition, life cycle assessment studies on multi-stage flash (MSF) desalination often neglect the impact of the disposed brine by assuming that dilution of the discharged brine impacts on ecological systems less. The present study contributes to these omissions by exploring the environmental sustainability of seawater desalination systems using life cycle impact assessment (LCIA). More specifically, the LCIA of Seawater Reverse Osmosis (SWRO) integrated with (i) an Electro-Dialysis (EDBMED) process and (ii) solar photovoltaics (PV) is investigated. Life cycle analysis was used to identify pertinent indicators of the LCIA and their implications in SWRO. The comparative analysis reveals that the advantage of SWRO as compared to other technologies such as MSF is energy efficiency, at estimated levels of 75.0%. The study concludes that despite the technological challenges associated with sustainable desalination and sustainable brine management, integrating renewable energy into seawater desalination can contribute to the sustainability improvements of seawater desalination systems. The findings of this paper provide an initial assessment of the ecological footprints of seawater desalination systems. Full article

Bromate is a potentially carcinogenic disinfection by-product of potential concern in desalinated waters, where bromide derived from seawater can be converted to bromate by the oxidising species used for disinfection. Historically, it has been difficult to maintain complete adherence to national standards of no more than 10 ppb for bromate at all locations served with desalinated seawater by the Saline Water Conversion Corporation (SWCC) in the Kingdom of Saudi Arabia. In this full-scale study, the addition of 100–200 ppb of ammonia to the produced water of a Multi-Stage Flash Desalination plant effectively controlled the formation of bromate in the transmission system supplying inland centres in the Makkah Province of the Kingdom of Saudi Arabia (Arafa, Taif) on a time scale sufficient for the distribution of water to the consumer, even when the bromide content of the produced water was artificially enhanced (up to 132 ppb) via the addition of seawater. Full article

This work presents a detailed thermo-economic analysis of unit water costs from dual-purpose cogeneration plants. The power levelized cost was first calculated for stand-alone steam, nuclear, and combined-cycle power plants. The cost of energy needed to operate the desalination systems connected to power plants was evaluated based on two different approaches: power- and heat-allocated methods. Numerical models based on the heat and mass balances of the power and desalination plants’ components were developed and validated. Comprehensive and updated data generated using Desaldata libraries were correlated to estimate the capital, labor, overhead, and maintenance costs for different desalination systems. The levelized water cost produced by multi-effect distillation, multi-effect distillation with vapor compression, multi-stage flash, and reverse osmosis systems connected to different power plants was estimated. The impact of various controlling parameters, including the price of natural gas, nuclear power plant installation cost, and the desalination capacity on water cost, was investigated. For all simulated cases, the levelized water cost evaluated using the heat-allocated method was found to be lower by 25–30% compared to that estimated using the power-allocated method. The cost of water produced using reverse osmosis remains below that produced by other desalination technologies. However, using the heat-allocated method to estimate the levelized water cost narrows the gap between the costs of water produced by multi-effect distillation and that produced by seawater reverse osmosis. The results also show that the use of the multi-effect distillation process in a cogeneration configuration rather than multi-effect distillation with vapor compression can result in a lower water cost. The profit analysis shows slight differences between the profit of a power plant connected to a reverse osmosis system and the profit of a power plant connected to a plain multi-effect distillation system. Full article