Search Results (893)

Two-dimensional transition metal dichalcogenides (TMDs) are key materials in ultrafast photonics. However, the performance of conventional TMDs is limited by their bandwidth and carrier recovery time. The novel Dirac semimetal nickel ditelluride (NiTe₂), with its broad-band response and excellent nonlinear properties, emerges as an ideal candidate for saturable absorber (SA) materials. In this work, we report, for the first time, the application of NiTe₂ in the ytterbium-doped fiber laser, demonstrating stable passive Q-switching operation. The nonlinear transmission curve reveals a modulation depth of 6.82% at 1 µm and a saturation intensity of 2.12 MW/cm². Using an all-fiber ring cavity structure, stable Q-switched pulses with a central wavelength of 1031 nm were achieved at a pump threshold of 94 mW, with a maximum pulse repetition frequency of 30.1 kHz. The minimum pulse width reached 2.3 μs, and the single-pulse energy increased to 3.05 nJ, with an impressive radio frequency (RF) spectral signal-to-noise ratio (SNR) of 58.9 dB. This study demonstrates the potential of NiTe₂ as a high-performance SA in the near-infrared region, providing a solid foundation for its future application in ultrafast laser technologies. Full article

Seawater electrolysis offers a promising route for sustainable hydrogen production in coastal areas, leveraging solar energy while reducing freshwater consumption. Yet, chloride-induced corrosion severely limits conventional electrodes such as titanium, which depend on passive titanium dioxide films and display minimal hydrogen evolution reaction activity (|i₀,H₂| ≈ 0.001–0.01 A/m²). Here, we report for the first time the use of copper-based coordination compounds—a triazole-derived polymer (CC_Cu) and a Prussian Blue Analogue (CuHCF)—as dual-function electrodes combining corrosion resistance with electrocatalytic activity. Structural integrity was verified by FTIR, TGA, XRD, and SEM/EDS analyses. Electrochemical tests in 0.5 M NaCl, interpreted using mixed potential theory, revealed corrosion potentials (E_corr) of −40 mV versus Standard Hydrogen Electrode (CuHCF) and −23 mV versus Standard Hydrogen Electrode (CC_Cu), and corrosion current densities of 0.259 and 0.379 A/m², respectively. Both exhibited hydrogen evolution reaction exchange current densities significantly higher than titanium (0.019 A/m² for CuHCF and 0.062 A/m² for CC_Cu). CuHCF achieved a Tafel slope of 222 mV/dec, comparable to NiMoP alloys and carbon steel. Complementary density functional theory calculations elucidated how metal–ligand interactions and electronic redistribution govern both catalytic performance and degradation. These findings introduce a new concept of semi-electrocatalysts, where copper coordination compounds act as structurally adaptive, low-cost materials bridging corrosion resistance and hydrogen evolution in seawater systems. Full article

Tunnel Oxide-Passivated Back Contact solar cells represent a next-generation photovoltaic technology with significant potential for achieving both high efficiency and low cost. This study addresses the challenge of low bifaciality inherent to the rear-side structure of TBC cells. Using the Quokka3 simulation and assuming high-quality surface passivation and fine-line printing accuracy, a systematic optimization was conducted. The optimization encompassed surface morphology, optical coatings, bulk material parameters (carrier lifetime and resistivity), and rear-side geometry (emitter fraction, metallization pattern and gap width). Through a multi-parameter co-optimization process aimed at enhancing conversion efficiency, a simulated conversion efficiency of 27.26% and a bifaciality ratio of 92.96% were achieved. The simulation analysis quantified the trade-off relationships between FF, bifaciality, and efficiency under different parameter combinations. This enables accurate prediction of final performance outcomes when prioritizing different metrics, thereby providing scientific decision-making support for addressing the core design challenges in the industrialization of TBC cells. Full article

Metal Injection Molding (MIM) enables complex orthodontic-bracket geometries but can introduce surface and geometric discontinuities that act as initiation sites for crevice and pitting corrosion. The effect of acidic, kombucha-like exposure on corrosion and repassivation was assessed for MIM-316L brackets relative to a commercial comparator, and the coupling between surface quality (roughness and wettability) and localized damage at scanning electron microscopy (SEM)-identified hot-spots was examined. Kombucha was characterized by pH and titratable acidity. Surfaces were characterized by SEM, areal roughness metrics (R_a, S_a, S_z, and A2), and wettability by sessile-drop goniometry. Electrochemical behavior in artificial saliva was measured using open-circuit potential and cyclic potentiodynamic polarization (ASTM F2129/G59), and a qualitative magnetic check was included as a pragmatic quality-assurance screen. Exposure in kombucha reduced breakdown and repassivation potentials and increased passive current density, with the strongest effects co-localizing geometric discontinuities. Commercial brackets exhibited markedly poorer surface quality (notably higher S_z), amplifying acidity-driven susceptibility. These findings indicate that, under acidic challenges, surface/geometry quality dominates corrosion behavior; non-magnetic-phase compliance and simple chairside screening (e.g., magnet test), alongside tighter manufacturing controls on roughness and edge finish, should be incorporated into clinical and industrial quality assurance (QA). Full article

It has been demonstrated that a monomolecular surface film with semiconducting characteristics forms on an austenitic, corrosion- and heat-resistant chromium–nickel steel with 0.10 wt.% C, 20 wt.% Cr, 9 wt.% Ni, and 6 wt.% Mn (10Kh20N9G6), microalloyed with yttrium, in aqueous 1 M H₂SO₄. This passive layer exhibits semiconducting behavior, as confirmed by electrochemical impedance and capacitance measurements. For the first time, key electronic parameters, including the flat-band potential, the thickness of the semiconductor layer, and the Fermi energy, have been determined from experimental Mott–Schottky plots obtained for the interphase boundary between the yttrium-microalloyed austenitic Cr–Ni steel (10Kh20N9G6) and aqueous 1 M H₂SO₄. The results reveal a systematic shift in the flat-band potential toward more negative values with increasing yttrium content in the alloy, indicating a modification of the electronic structure of the passive film. Simultaneously, a decrease in the Fermi energy is observed, suggesting an increase in the work function of the metal surface due to the presence of yttrium. These findings contribute to a deeper understanding of passivation mechanisms in yttrium-containing stainless steels. The formation of a semiconducting passive film is essential for enhancing the electrochemical stability of stainless steels, and the role of rare-earth microalloying elements, such as yttrium, in this process is of both fundamental and practical interest. Full article

Friction Stir Processing (FSP) has emerged as an advanced solid-state surface engineering technique for tailoring high-performance surface architectures in metal matrix composites (MMCs). By combining localized thermo-mechanical deformation with controlled material flow, FSP enables grain refinement, homogeneous dispersion of reinforcement, and strong interfacial bonding without melting or altering bulk properties. This review critically examines the role of FSP in enhancing the mechanical, tribological, and corrosion performance of composites, with emphasis on process–structure–property relationships. Key strengthening mechanisms, including grain boundary strengthening, load transfer, particle pinning, and defect elimination, are systematically discussed, along with their implications for wear resistance, fatigue life, and durability. Special attention is given to corrosion and tribo-corrosion behavior, highlighting electrochemical mechanisms such as micro-galvanic interactions, passive film stability, and interfacial chemistry. Furthermore, the eco-efficiency, industrial viability, and sustainability advantages of FSP are evaluated in comparison with conventional surface modification techniques. The review concludes by identifying critical challenges and outlining future research directions for the scalable, multifunctional, and sustainable design of composite surfaces. Full article

Some mining sites generate acid mine drainage (AMD)—a highly acidic, metal-rich waste stream that affects bodies of water. Passive treatment systems are widely being adapted, particularly for abandoned or closed mines, due to their cost-effectiveness and lower environmental impact. However, novel strategies and approaches still need to be developed, especially in their implementation. Through batch experiments, this study identifies the effective sequence of three locally available treatment media, namely limestone (LS), steel slag (SS), and activated carbon (AC), using various water quality and pollution indices (WQPIs). The performance of the sequences was assessed based on their ability to improve various in situ parameters (pH, oxidation–reduction potential (ORP), dissolved oxygen (DO), and electrical conductivity (EC)) and their efficiency in removing Fe, Mn, Cu, and SO₄²⁻. Six sequences of media were identified and ranked by calculating a score based on comparisons with the Philippine General Effluent Standard (GES) by normalization and specific WQPIs for AMD and AMD-impacted waters, such as the CCMEWQI, MAMDI, and WPI-AMD. Analysis showed that the sequence of LS-AC-SS and SS-LS-AC yielded the highest removal for heavy metals (98.78% for Fe and Mn and 89.92% for Cu). However, limited removal of SO₄²⁻ was observed (14.96%), which suggests that additional treatment beyond the materials explored must be considered. Considering all the parameters and assessing them through normalization and WQPIs, the sequence of SS-LS-AC achieved the overall best treatment performance. Differences were observed in the ranking between the methods, with WQPIs successfully capturing actual water quality, demonstrating its robustness as an assessment tool. This study shows that the treatment media sequence is a factor in treating AMD, specifically utilizing AC, SS, and LS. Full article

This study aims to investigate the effects of Cr and Mo added to Fe-Al alloys on their corrosion behavior in acidic and chloride-containing environments. Corrosion tests were carried out in 0.5 M H₂SO₄ and 3.5 wt.% NaCl aerated aqueous solutions. X-ray diffraction analyses reveal that all alloys exhibited predominantly body-centered cubic structures in the homogenized states. In the 0.5 M H₂SO₄ solution, the addition of Cr can effectively reduce the critical current density; however, the anodic and cathodic polarization curves still intersected three times, similar to the alloy without the addition of Cr, resulting in three corrosion potentials. With the further addition of Mo, the critical current density became much lower, leading to a single corrosion potential. In the 3.5 wt.% NaCl solution, the addition of Cr alone markedly improved the pitting resistance of Fe-Al alloys, while the further addition of Mo broadened the passive region and increased the pitting potential. The analysis of ion concentrations was consistent with the potentiodynamic polarization results, verifying the stabilization of Mo on the passive film. It is evident that the addition of Cr promotes passivation of the Fe-Al alloy, and the further incorporation of Mo enhances this effect even more significantly. The related corrosion mechanisms are discussed with Nerst equations of metal–metal oxides and their solubility products (K_sp). Full article

This paper examines the time-frequency dynamics and the spillover effects among the clean energy, fossil fuel, metal, and electricity markets using a wavelet local multiple correlation analysis and a time-varying-parameter vector autoregression model. The findings suggest that the electricity market is isolated from the other markets in the short to medium term, while long-term interdependence is strong during crises such as the global financial crisis, the COVID-19 pandemic, and the Russia-Ukraine conflict. There exists a long-term integration trend across those four markets, with the fossil fuel and metal markets playing dominant roles. The fossil fuels market remained the primary channel through which systemic shocks were transmitted to all other sectors. The clean energy market has transformed from a market that passively absorbed shocks into a systemic driver during crises. These findings provide insights for investors and policymakers across different time horizons. Full article

This study quantitatively investigates the corrosion behavior of aluminum (Al1070) under salt water acetic acid test (SWAAT) conditions, focusing on the effects of chloride ions (Cl⁻) and acetic acid (CH₃COOH) concentration on the pitting corrosion. Potentiodynamic polarization tests showed that increasing Cl⁻ concentration caused a negative shift in corrosion potential (E_corr) and an increase in corrosion current density (i_corr), indicating accelerated passive film breakdown and enhanced pitting susceptibility. Immersion tests and SEM analysis revealed intensified surface discoloration, oxide formation, and crack propagation at higher Cl⁻ levels, confirming localized dissolution. The effect of acetic acid was evaluated for concentrations ranging from 0 to 2000 µL L⁻¹. Higher acetic acid levels lowered solution pH and slightly increased E_corr and elevated i_corr while reducing ΔE(E_pit − E_corr), indicating increased localized corrosion susceptibility. SEM and 3D XCT analyses showed increased pit density, corrosion loss, and pitting showed temporary pit coalescence at intermediate concentrations. Mechanistically, the acidic SWAAT environment (pH 2.8–3.0) positions aluminum in the active corrosion region. Cl⁻ destabilizes the passive oxide layer, initiating pitting, while acetic acid promotes metal dissolution via hydrogen evolution reactions. Their combined action exerts a specific effect, accelerating localized corrosion through chemical oxide layer degradation. These results provide quantitative insights into aluminum corrosion under SWAAT conditions. They could inform the design of corrosion resistant materials and reliability assessments in industrial applications. Full article

In physiological environments, several metallic alloys, including titanium, stainless steel, cobalt–chromium, and emerging biodegradable systems such as magnesium (Mg), zinc (Zn), and iron (Fe), offer mechanical properties and biocompatibility suitable for load-bearing implants. With the rapid advancement of 3D printing technologies, these alloys can now be fabricated into patient-specific, complex geometries that enhance both structural performance and functional integration. Beyond serving as structural supports, 3D-printed alloys are increasingly engineered as localized drug-delivery platforms to release anti-inflammatory, antibacterial, anticancer, and osteogenic agents at the implant–tissue interface, addressing the dual clinical needs of site-specific therapy and mechanical stabilization. Nevertheless, this field remains underexplored because studies differ widely in alloy chemistry, surface topography, porosity, coating strategy, drug-loading methods, and release profiles, as well as in how material degradation or passivation interacts with pharmacokinetics. For the first time, this review consolidates drug-loading and elution strategies across 3D-printed alloy platforms, compares therapeutic categories in relation to alloy and coating types, and critically evaluates how the surface microstructure or alloy geometry influences release behavior. Full article

During the drilling operations of a shale gas well in Central China, a severe failure occurred in the pressure-resistant cylinder of the measurement while drilling (MWD) tool, with numerous microcracks observed on the outer surface of the cylinder. This significantly compromised the safety of the MWD tool and the reliability of the logging data. To determine the cause of the failure, macroscopic morphology analysis and physicochemical performance tests were conducted on the failed pressure-resistant cylinder, which is made of Cr20Ni11 (UNS 308) austenitic stainless steel. Additionally, scanning electron microscopy, X-ray energy dispersive spectroscopy, white light interferometry, and X-ray photoelectron spectroscopy were employed to analyze the morphology and chemical composition of the corrosion products and cracks, thereby identifying the cause of the corrosion failure. It is demonstrated that the physicochemical properties of the pressure-resistant cylinder comply with the specifications of relevant standards. Nevertheless, the size of non-metallic inclusions in the material reaches 100 μm, which significantly enhances the material’s susceptibility to stress corrosion cracking (SCC). Meanwhile, solid particles and high-concentration Cl⁻ present in the drilling fluid deteriorate the passive film formed on the substrate surface. EDS analysis reveals that the Cl⁻ content is measured to be 4.09 wt%, which induces pitting on the substrate with a maximum pitting depth of 13.5556 μm. Under the synergistic effect of stress and corrosion, the pressure-resistant cylinder experiences SCC failure initiated by Cl⁻; specifically, cracks nucleate at the bottom of the pitting pits and propagate along the radial direction. Full article

Microbial fermentation stands as the foundational technology in modern biorefineries, yet its industrial scalability is critically constrained by product inhibition, prohibitive downstream separation costs, and substrate inhibition. Metal–organic frameworks (MOFs) offer a tunable material platform to address these challenges through rational design of pore size, shape, and chemical functionality. This review systematically chronicles the evolution of MOF applications in biomass fermentation across four generations, demonstrating a synergistic mapping where the core fermentation challenges—product toxicity, substrate toxicity, and separation energy intensity—align with the inherent MOF advantages of high adsorption capacity, programmable selectivity, and tunable functionality. The applications progress from first-generation passive adsorbents for in situ product removal, to second-generation protective agents for mitigating inhibitors, and third-generation immobilization scaffolds enabling continuous processing. The fourth-generation systems transcend passive scaffolding to position MOFs as active metabolic partners in microbe-MOF hybrids, driving cofactor regeneration and tandem biocatalysis. By synthesizing diverse research streams, ranging from defect engineering to artificial symbiosis, including defect engineering strategies, this review establishes critical design principles for the rational integration of programmable materials in next-generation biorefineries. Full article

Stainless steels are commonly used in coastal structures and in seawater desalination and treatment systems, so understanding their corrosion behaviour under different salinity conditions is important to ensure the durability and reliability of the material. In this study, the behaviour of AISI 304L, AISI 316L, and 2205 duplex stainless steels (DSS) was tested in three media with different salinities: brackish water (BSW), seawater (SW), and concentrated seawater bittern (CSW). Testing was conducted using classical electrochemical methods (open circuit potential, linear, and potentiodynamic polarization) supplemented by surface analyses (optical microscopy, SEM/EDS, and optical profilometry). Corrosion resistance increased in the order AISI 304L < AISI 316L < 2205 DSS. Duplex steel 2205 performed best in all media: it exhibited the most positive open circuit potential, the highest polarization resistance, the lowest corrosion current density, and the widest passive range. Unexpectedly, CSW showed improved corrosion resistance compared to SW, which is explained by the reduced chloride content characteristic of seawater bittern after NaCl crystallisation and the presence of magnesium, calcium, and sulphate ions that promote the formation of protective deposits on the metal surface. Pronounced pitting was observed on AISI 304L steel in seawater, while surface degradation in brackish and concentrated seawater was significantly less, and 2205 DSS remained almost unchanged. The results obtained can serve as guidelines for the design and selection of materials for equipment and structures in industries operating in aggressive marine and coastal environments, such as desalination plants, shipbuilding, and energy systems. Full article

Grey cast iron brake discs are widely used in automotive applications due to their excellent thermal and mechanical properties. However, stricter environmental regulations such as Euro 7 demand improved surface durability to reduce particulate emissions and corrosion-related failures. This study evaluates multilayer coatings fabricated by Laser Metal Deposition (LMD) as a potential solution. Two multi-layer systems were investigated: 316L + (316L + WC) and 316L + (430L + TiC), which were primarily reinforced with ceramic additives to increase wear resistance, with their influence on corrosion being critically evaluated. Electrochemical tests in 5 wt.% NaCl solution (DIN 17475) revealed that the 316L + (316L + WC) coating exhibited the lowest corrosion current density and most stable passive behavior, consistent with the inherent passivation of the austenitic 316L matrix. In contrast, the 316L + (430L + TiC) system showed localized corrosion associated with micro-galvanic interactions, despite the chemical stability of TiC particles. Post-corrosion SEM and EDS confirmed chromium depletion and chloride accumulation at corroded sites, while WC particles exhibited partial dissolution. These findings highlight that ceramic reinforcements do not inherently improve corrosion resistance and may introduce localized degradation mechanisms. Nevertheless, LMD-fabricated multilayer coatings demonstrate potential for extending brake disc service life, provided that matrix–reinforcement interactions are carefully optimized. Full article