Search Results (311)

Acromegaly is caused by an excessive secretion of growth hormone and the secondary elevation of IGF-1 levels, leading to progressive changes in multiple body systems, including the craniofacial region and oral cavity. Dental manifestations such as mandibular overgrowth, macroglossia, malocclusion, periodontal disease, and prosthetic difficulties represent not only a clinical component of the disease but also a significant therapeutic and diagnostic challenge. The aim of this review is to present the current state of knowledge on the relationship between acromegaly and oral health and to analyze the role of interdisciplinary collaboration between endocrinologists and dentists in patient care. For this narrative review, a literature search was conducted in the PubMed, Scopus, and Web of Science databases covering the period from 2000 to 2025. Sixty-two peer-reviewed publications meeting the methodological and thematic criteria were included in the analysis, including original studies, meta-analyses, systematic reviews, and case reports. The results indicate significant correlations between disease activity and the severity of periodontal and microbiological changes, while effective endocrine treatment only results in the partial regression of morphological changes. Particular attention was given to the role of the dentist in recognizing the early symptoms of the disease, planning prosthetic and surgical treatment, and monitoring therapy-related complications. Interdisciplinary collaboration models, including integrated clinics and co-managed care, were also described as optimal systemic solutions for improving treatment quality. The conclusion drawn from the analysis are as follows: there is a need for the permanent integration of dentistry into the standard of interdisciplinary care for patients with acromegaly, in both diagnostic and therapeutic dimensions. Increasing awareness among dentists and developing integrated collaboration models may reduce the time to diagnosis, improve patients’ quality of life, and enable the more effective management of craniofacial complications in the course of this rare disease. Full article

Excavations undertaken at Mata Menge, the securely dated Middle Pleistocene open site on the Indonesian island of Flores, have resulted in the recovery of over 670 well-preserved fossil murine molars from two distinct stratigraphic intervals. This research is the first systematic metric and morphological analysis of this material, with the results indicating the predominance of a single murine species, though the finds from the lower interval (0.7 million years ago) are for the most part significantly smaller than those recovered from the ~70,000-year-younger upper interval. Comparison of our findings with the analyses of the Flores endemic recent and fossil giant rats undertaken by Hooijer in 1957 and Musser in 1981 indicates the Mata Menge large murine maxillary molars, and, in particular, those from the lower interval are very similar to the limited Middle Pleistocene material Musser designated to be Hooijeromys nusatenggara. However, the associated Mata Menge mandibular molars are most similar to, though smaller than, the mid-Holocene Papagomys theodorverhoeveni. In addition to providing a detailed reference for future studies of large fossil murines excavated from Wallacea, our findings indicate Musser’s reassignment of Hooijer’s maxillary holotype of P. verhoeveni to P. armandvillei would benefit from re-examination. Full article

This study evaluated the effects of low-dose recombinant human bone morphogenetic protein-2 (rhBMP-2) coating in combination with vacuum plasma treatment on titanium implants, aiming to enhance osseointegration and bone regeneration while minimizing the adverse effects associated with high-dose rhBMP-2. In vitro analyses demonstrated that plasma treatment increased surface energy, promoting cell adhesion and proliferation. Additionally, it facilitated sustained rhBMP-2 release by enhancing protein binding to the implant surface. In vivo experiments using the four-beagle mandibular defect model were conducted with the following four groups: un-treated implants, rhBMP-2–coated implants, plasma-treated implants, and implants treated with both rhBMP-2 and plasma. Micro-computed tomography (micro-CT) and medical CT analyses revealed a significantly greater volume of newly formed bone in the combined treatment group (p < 0.05). Histological evaluation further confirmed superior outcomes in the combined group, showing significantly higher bone-to-implant contact (BIC), new bone area (NBA), and inter-thread bone density (ITBD) compared to the other groups (p < 0.05). These findings indicate that vacuum plasma treatment enhances the biological efficacy of low-dose rhBMP-2, representing a promising strategy to improve implant integration in compromised conditions. Further studies are warranted to determine the optimal clinical dosage. Full article

Temporomandibular disorders (TMDs) encompass a heterogeneous group of musculoskeletal and neuromuscular conditions affecting the temporomandibular joint (TMJ) and masticatory system. Due to academic stress and parafunctional habits, dental students may be particularly vulnerable to TMD. Objective: To determine the prevalence of TMD symptoms and their psychosocial and functional correlates among students at the Faculty of Dental Medicine, UMPh Iasi, Romania, using the diagnostic criteria for TMD (DC/TMD) self-report axis and axis II instruments. Methods: In this cross-sectional survey, 356 volunteer students (66.0% female; mean age, 22.9 ± 3.6 years) out of a total population of 1874 completed an online DC/TMD–based questionnaire. Axis I assessed orofacial pain, joint noises, and mandibular locking. Axis II instruments included the Graded Chronic Pain Scale (GCPS), Jaw Functional Limitation Scale (JFLS-20), Patient Health Questionnaire (PHQ-9), Generalized Anxiety Disorder-7 (GAD-7), and Oral Behaviors Checklist (OBC). Descriptive statistics summarized frequencies, means, and standard deviations; χ² tests and t-tests compared subgroups by sex; Pearson correlations explored relationships among continuous measures (α = 0.05). Results: A total of 5% of respondents reported orofacial pain in the past 30 days; 41.6% observed TMJ noises; 19.7% experienced locking episodes. Mean JFLS score was 28.3 ± 30.5, with 4.8% scoring > 80 (severe limitation). Mean PHQ-9 was 5.96 ± 5.37 (mild depression); 15.5% scored ≥ 10. Mean GAD-7 was 5.20 ± 4.95 (mild anxiety); 16.0% scored ≥ 10. Mean OBC score was 12.3 ± 8.5; 30.1% scored ≥ 16, indicating frequent parafunctional habits. Symptom prevalence was similar by sex, except temporal headache (43.4% females vs. 24.3% males; p = 0.0008). Females reported higher mean scores for pain intensity (2.09 vs. 1.55; p = 0.0013), JFLS (32.5 vs. 18.0; p < 0.001), PHQ-9 (6.43 vs. 5.16; p = 0.048), and OBC (13.9 vs. 9.7; p = 0.0014). Strong correlation was observed between PHQ-9 and GAD-7 (r = 0.74; p < 0.001); moderate correlations were observed between pain intensity and PHQ-9 (r = 0.31) or GAD-7 (r = 0.30), between JFLS and pain intensity (r = 0.33), and between OBC and PHQ-9 (r = 0.39) (all p < 0.001). Conclusions: Nearly half of dental students reported TMD symptoms, with appreciable functional limitation and psychosocial impact. Parafunctional behaviors and psychological distress were significantly associated with pain and dysfunction. These findings underscore the need for early screening, stress-management interventions, and interdisciplinary care strategies in the dental student population. Full article

Objectives: This study aimed to evaluate the effects of AMCOP^® elastodontic appliances on cephalometric parameters of skeletal divergence and upper airway dimensions in growing patients, comparing treated individuals with an untreated control group. Methods: A total of 60 subjects (30 treated with AMCOP^® devices and 30 controls) were selected, with mean ages of 8.67 ± 1.3 and 9.19 ± 0.8 years, respectively. The AMCOP^® appliances, designed for mixed dentition, were worn for 1 h during the day and throughout the night for 6–8 months. Cephalometric analyses were conducted at the beginning (T0) and end (T1) of treatment. Statistical analyses were performed using multivariable linear regression models to assess changes in skeletal and airway parameters, with significance set at p < 0.05. Results: Significant reductions were observed in Ans-Snp^Go-Gn (p = 0.0351), SN^Go-Gn (p = 0.0091), and FMA (p < 0.001) in the treated group compared to controls, indicating improved mandibular rotation. Upper airway spaces (SPAS, MAS, IAS) increased significantly, suggesting enhanced airway patency. Regression models confirmed the positive impact of AMCOP^® therapy on skeletal and airway outcomes, particularly in subjects with pronounced vertical discrepancies. Conclusions: AMCOP^® elastodontic devices effectively promote anterior mandibular rotation and reduce mandibular plane inclination in hyperdivergent patients, contributing to balanced craniofacial growth. The expansion of pharyngeal spaces indicates potential respiratory benefits. Future research is needed to confirm long-term stability and address variability in treatment response. Full article

This study analyzes 209 dog skeletons from two sites in Wolin (9th–mid-13th century AD) using 100 standard metric variables covering cranial, mandibular, and postcranial elements. Estimated withers height, body mass, age at death, and sex were derived using established methods. The results indicate the presence of at least two to three morphotypes: small spitz-like dogs (40–50 cm, 4–6 kg), medium brachycephalic forms (50–60 cm, 10–15 kg), and larger mesocephalic individuals (up to 65 cm, 20–40 kg). Dogs lived 3–10 years, with both sexes represented. Signs of cranial trauma and dental wear suggest utilitarian roles such as guarding. The size range and morphological diversity point to intentional breeding and trade-based importation. Small dogs likely served as companions or city guards, while medium and large types were used for herding, hunting, or transport. These findings highlight Wolin’s role as a dynamic cultural and trade center, where human–dog relationships were shaped by anthropogenic selection and regional exchange. Full article

Background/Objectives: The Motor Speech Hierarchy (MSH) Probe Words (PWs) have yet to be validated as effective in discriminating between children with impaired and children with typically developing speech motor control. This preliminary study first examined the effectiveness of the mandibular control subtest of the MSH-PWs in distinguishing between typically developing (TD) and speech sound-disordered (SSD) children aged between 3 years 0 months and 3 years 6 months. Secondly, we compared automatically derived kinematic measures of jaw range and control with MSH-PW consensus scoring to assist in identifying deficits in mandibular control. Methods: Forty-one children with TD speech and 13 with SSD produced the 10 words of the mandibular stage of the MSH-PWs. A consensus team of speech pathologists observed video recordings of the words to score motor speech control and phonetic accuracy, as detailed in the MSH-PW scoring criteria. Specific measures of jaw and lip movements during speech were also extracted to derive the objective measurements, with agreement between the perceptual and objective measures of jaw range and jaw control evaluated. Results: A significant difference between TD and SSD groups was found for jaw range (p = 0.006), voicing transitions (p = 0.004) and total mandibular scores (p = 0.015). SSD and TD group discrimination was significant (at alpha = 0.01) with a balanced classification accuracy of 0.79. Initial analysis indicates objective kinematic measures using facial tracking show good agreement with perceptual judgements of jaw range and jaw control. Conclusions: The preliminary data indicate the MSH-PWs can discriminate TD speech from SSD at the level of mandibular control and can be used by clinicians to assess motor speech control. Further investigation of objective measures to support perceptual scoring is indicated. Full article

The dimensional accuracy of 3D-printed edentulous jaw models is critical for successful prosthetic treatment outcomes. This study investigated the accuracy of 3D-printed working models of a completely edentulous jaw through comparative analysis of digital images generated by three laboratory scanners. A reference plaster model of a mandibular edentulous arch was digitized and used to produce ten resin models via digital light processing (DLP) technology. Each model was scanned using three different laboratory scanners: AutoScan-DS-EX, AutoScan-DS-EX Pro(H), and Optical 3D Scanner Vinyl. Digital comparison was performed using specialized software, evaluating the root mean square (RMS) deviation and percentage of values within an acceptable deviation range ±0.05 mm. All printed models showed significant deviations from the reference model (p < 0.05), with RMS values ranging from 109.2–139.7 µm and acceptable deviation percentages ranging from 29.34 to 32.31%. The mean precision RMS value was 66.37 µm. The mean intraclass correlation coefficient of 0.544 indicated moderate precision. Optical 3D Scanner Vinyl demonstrated the highest consistency, while AutoScan-DS-EX Pro(H) showed maximum variability. No statistically significant differences were found between scanners (p = 0.075). While the investigated scanners demonstrated reliable performance and sufficient accuracy, the additive manufacturing process introduced clinically significant deviations, highlighting the importance of verification between printed models and their digital originals before proceeding with clinical stages. Clinical practice should prioritize scanning systems with advanced software algorithms over those with superior hardware specifications alone. Full article

Obstructive sleep apnea syndrome (OSAS) in children and adolescents is a prevalent and multifactorial disorder associated with significant short- and long-term health consequences. While adenotonsillectomy (AT) remains the first-line treatment, a substantial proportion of patients—especially those with obesity, craniofacial anomalies, or comorbid conditions—exhibit persistent or recurrent symptoms, underscoring the need for individualized and multimodal approaches. This review provides an updated and comprehensive overview of current and emerging treatments for pediatric OSAS, with a focus on both surgical and non-surgical options, including pharmacological, orthodontic, and myofunctional therapies. A narrative synthesis of recent literature was conducted, including systematic reviews, randomized controlled trials, and large cohort studies published in the last 10 years. The review emphasizes evidence-based indications, mechanisms of action, efficacy outcomes, safety profiles, and limitations of each therapeutic modality. Adjunctive and alternative treatments such as rapid maxillary expansion, mandibular advancement devices, myofunctional therapy, intranasal corticosteroids, leukotriene receptor antagonists, and hypoglossal nerve stimulation show promising results in selected patient populations. Personalized treatment plans based on anatomical, functional, and developmental characteristics are essential to optimize outcomes. Combination therapies appear particularly effective in children with residual disease after AT or with specific phenotypes such as Down syndrome or maxillary constriction. Pediatric OSAS requires a tailored, multidisciplinary approach that evolves with the child’s growth and clinical profile. Understanding the full spectrum of available therapies allows clinicians to move beyond a one-size-fits-all model, offering more precise and durable treatment pathways. Emerging strategies may further redefine the therapeutic landscape in the coming years. Full article

Background and Clinical Significance: Prosthetic rehabilitation in the aesthetic zone of periodontally compromised patients presents a complex clinical challenge, requiring a careful coordination of aesthetic, functional, and biological demands. This case highlights the benefits of digital dentistry, interdisciplinary collaboration, and regular maintenance in achieving long-term success in complex rehabilitations of periodontally compromised patients. Case Presentation: This case report describes the digital minimally invasive rehabilitation of a 39-year-old male patient with Stage III periodontitis, occlusal discrepancies, tooth mobility, and an interincisal diastema. A fully digital workflow—including intraoral scanning, aesthetic previewing, and mandibular motion analysis—was employed to guide diagnosis, treatment planning, and prosthetic execution. Conservative tooth preparations using a biologically oriented approach (BOPT) were combined with customised provisional restorations to support soft tissue conditioning and functional control throughout the provisional phases. Mandibular motion tracking facilitated the design of a personalised anterior guidance to improve occlusion and correct the deep bite. The interincisal diastema was initially maintained then closed during the advanced phase of treatment based on aesthetic simulations and patient preference. One unplanned endodontic treatment was required during the provisional phase, but no other complications occurred. Conclusions: At the four-year follow-up, the patient demonstrated stable periodontal and occlusal conditions, improved clinical indices, and high satisfaction with the aesthetic outcome. Full article

Background/Objectives: A thorough understanding of tooth anatomy is essential for effective root canal treatment. This study aims to investigate the root canal morphology of mandibular incisors (MIs) and the presence of distolingual roots in mandibular first molars (MFMs) and to explore the potential correlation between these anatomical variations. Methods: A total of 562 CBCT scans were retrospectively analyzed, corresponding to 1124 mandibular central incisors (MCIs), mandibular lateral incisors (MLIs), and MFMs each. The DLR in MFMs was correlated with the complex anatomy in MIs and analyzed using a chi-square test, with the odds ratio obtained through binary regression analysis. Differences related to gender, site, and age were analyzed using the chi-square test. Results: Most MI scans revealed Vertucci Type I canal morphology, with a higher percentage in MCIs (71.1%) than MLIs (64.9%). Additionally, 5.25% of MFM scans indicated a DLR, with a higher prevalence in males (3.5%) and younger individuals (3.4%); however, a statistically significant difference was observed only in MCIs (p = 0.035) across different age groups. The study also identified a highly significant difference in complex canal anatomy, comparing both MIs on either side and the presence of DLR in MFMs (p < 0.001). Furthermore, the relationship between complex canal systems in MIs and MFMs with DLR was confirmed. Conclusions: In conclusion, the Vertucci Type I canal configuration was predominant in both MIs, followed by Type III. The DLR was present in 5.25% of the total scans, and its presence strongly correlated with complex morphology in both MIs. Full article

This study aimed to evaluate the impact of Twin Block appliance therapy on skeletal, dentoalveolar, and facial soft tissue characteristics. The study included 18 participants with Class II skeletal malocclusion who were treated with the Twin Block appliance. Lateral cephalograms and 3D face scans were analyzed before and after therapy for each participant. Dependent t-test results showed a significant increase in the protrusion of the lower incisors (p < 0.001), proclination of the lower incisors (p = 0.021), SNB (p = 0.005), Ls:E (p = 0.040), mandibular length (p < 0.001), and soft tissue mandible length (p < 0.001) and a significant decrease in the ANB (p = 0.003), Wits (p = 0.001), ANPG (p = 0.001), overbite (p = 0.001), and the retrusion of upper incisors (p = 0.002). Twin Block therapy caused changes in skeletal and soft tissue characteristics. The increase in the SNB angle and mandibular length, accompanied by the decrease in the ANB and Wits values reduced the skeletal discrepancy. The reduction in the ANPG indicated an improvement in the skeletal profile. Additionally, the increase in the soft tissue mandible length and distance between the upper lip and E-line contributed to improved esthetic soft tissue profile characteristics. Full article

Background/Objectives: This study evaluates the diagnostic and referral skills of final-year dental students at Al-Iraqia University using a questionnaire based on malocclusion cases ranging from mild to severe. Methods: The questionnaire, featuring photos and radiographs of five selected treated cases from two textbooks, was answered by 165 students who were asked to assess each case and determine whether orthodontic or surgical treatment was necessary, as well as to identify factors contributing to an unesthetic profile, such as irregular teeth. Frequency distribution and the Chi-square test were used for statistical analysis. Results: The results indicated good overall clinical competence. The unesthetic profile and irregular teeth were the main reasons for referring both Class II and III cases for surgery, with mandibular retrusion being the most common factor in aesthetic concerns. Maxillary protrusion was less frequently selected as a key factor in Class II malocclusion cases. Conclusions: The findings suggest that students demonstrated a high level of diagnostic accuracy in identifying treatment needs for various malocclusion cases. Full article

Background/Objectives: Previous studies on clear aligner therapy (CAT) in mixed dentition primarily focused on the predictability of maxillary arch expansion. However, limited evidence is available regarding mandibular arch changes, particularly in relation to inter-arch coordination. This study aims to evaluate the effectiveness and predictability of dental expansion in both the upper and lower arches using Invisalign First^® aligners. Methods: A retrospective analysis was conducted with 15 participants. Dental expansions were assessed before and after treatment using iTero intraoral scans processed with 3D analysis software. Measurements were compared to the predicted movements planned in ClinCheck^®. Data normality was verified (Shapiro–Wilk test), descriptive statistics were calculated, and paired t-tests were performed to compare clinical and predicted expansions, with significance set at 0.05. Results: Clear aligners achieved effective dento-alveolar expansion in both arches. Predictability was higher at the cusp level than at the gingival level, indicating a tendency toward tipping movements rather than bodily expansion. The study also highlighted mandibular expansion outcomes and gingival-level discrepancies, providing new insights compared to the previous literature. Minor differences between predicted and achieved movements were observed, partly attributable to natural growth and deciduous tooth exfoliation. Conclusions: Clear aligners are effective in achieving maxillary and mandibular arch expansion in mixed dentition, with good predictability at the coronal level. Overengineering buccal root torque may help promote bodily expansion and reduce cuspal–gingival discrepancies. Further studies with larger sample sizes are needed to optimize treatment planning and predictability. Full article

Critical-sized bone defects (CSBDs) are injuries that exceed the body’s natural capacity for repair and require external intervention. These defects are particularly challenging in the mandible, often resulting from trauma, tumor resection, or implant-related complications. Effective treatment involves scaffold designs that support vascularization, bone formation, and sufficient mechanical strength. This systematic review aims to assess whether ceramic-based scaffold properties, including porosity, pore size, and macroscopic characteristics, improve vascularization, bone formation, and the mechanical properties in the treatment of CSBDs in large animal models. A search of databases (PubMed, Embase, and Web of Science) identified 11 in vivo studies involving CSBDs (>2 cm), ceramic scaffolds, and histological analysis. Findings indicate that scaffolds with porosity exceeding 50% yield optimal outcomes by striking a balance between cell infiltration and mechanical stability. Pore sizes ranging from 300 μm to 700 μm are ideal for vascularization and bone ingrowth. Three-dimensional (3D) printing shows promise in creating scaffolds with precise and reproducible features. However, the studies varied significantly in their methodologies and outcomes, with no consensus on the optimal scaffold properties for mandibular CSBDs. Scaffold porosity and pore size play key roles in promoting vascularization and bone regeneration. Various animal models reinforce this finding, suggesting that scaffold architecture is crucial for biological integration and functional outcomes. This review highlights the importance of standardized research protocols and clear design criteria in enhancing the success of bone regeneration. Future research should investigate emerging biomaterials and new scaffold technologies to overcome current limitations in clinical applications. Full article