Search Results (80)

Bionic synthesis technology has made significant breakthroughs in porous functional materials by replicating and optimizing biological structures. For instance, biomimetic titanium dioxide-coated carbon multilayer materials, prepared via biological templating, exhibit a hierarchical structure, abundant nanopores, and synergistic effects. Bionic mineralization further enhances microcapsules by forming a secondary inorganic wall, granting them superior impermeability, high elastic modulus, and hardness. Through techniques like molecular self-assembly, electrospinning, and pressure-driven fusion, researchers have successfully fabricated centimeter-scale artificial lamellar bones without synthetic polymers. In environmental applications, electrospun membranes inspired by lotus leaves and bird bones achieve 99.94% separation efficiency for n-hexane–water mixtures, retaining nearly 99% efficiency after 20 cycles. For energy applications, an all-ceramic silica nanofiber aerogel with a bionic blind bristle structure demonstrates ultralow thermal conductivity (0.0232–0.0643 W·m⁻¹·K⁻¹) across a broad temperature range (−50 to 800 °C). This review highlights the preparation methods and recent advances in biomimetic porous materials for practical applications. Full article

Background/Objectives: Oncogenic KRAS drives ~30% of solid tumours, yet the only approved G12C-specific drugs benefit ≈ 13% of KRAS-mutant patients, leaving a major clinical gap. We sought mutation-agnostic natural ligands from Ziziphus lotus, whose stereochemically rich phenolics may overcome this limitation by occupying the SI/II (Switch I/Switch II) groove and locking KRAS in its inactive state. Methods: Phytochemical mining yielded five recurrent phenolics, such as (+)-catechin, hyperin, astragalin, eriodictyol, and the prenylated benzoate amorfrutin A, benchmarked against the covalent inhibitor sotorasib. An in silico cascade combined SI/II docking, multi-parameter ADME/T (Absorption, Distribution, Metabolism, Excretion, and Toxicity) filtering, and 100 ns explicit solvent molecular dynamics simulations. Pharmacokinetic modelling predicted oral absorption, Lipinski compliance, mutagenicity, and acute-toxicity class. Results: Hyperin and astragalin showed the strongest non-covalent affinities (−8.6 kcal mol⁻¹) by forging quadridentate hydrogen-bond networks that bridge the P-loop (Asp30/Glu31) to the α3-loop cleft (Asp119/Ala146). Catechin (−8.5 kcal mol⁻¹) balanced polar anchoring with entropic economy. ADME ranked amorfrutin A the highest for predicted oral absorption (93%) but highlighted lipophilic solubility limits; glycosylated flavonols breached Lipinski rules yet remained non-mutagenic with class-5 acute-toxicity liability. Molecular dynamics trajectories confirmed that hyperin clamps the SI/II groove, suppressing loop RMSF below 0.20 nm and maintaining backbone RMSD stability, whereas astragalin retains pocket residence with transient re-orientation. Conclusions: Hyperin emerges as a low-toxicity, mutation-agnostic scaffold that rigidifies inactive KRAS. Deglycosylation, nano-encapsulation, or soft fluorination could reconcile permeability with durable target engagement, advancing Z. lotus phenolics toward broad-spectrum KRAS therapeutics. Full article

Every year, a large amount of antibiotics enter aquatic environments globally through discharging of pharmaceutical wastewater and domestic sewage, emissions from agriculture, and livestock, posing a severe threat to ecosystems and human health. Therefore, it is essential to develop efficient adsorption materials for rapid removal of antibiotics in water. In this study, abundant and renewable wetland plants (lotus leaves, Arundo donax, and canna lilies) were utilized as raw materials to prepare biochar through slow pyrolysis combined with KOH chemical activation. The prepared biochar was employed to adsorb typical tetracycline (TC) antibiotics (TC-HCl, CTC-HCl, OTC-HCl) from water. The results showed that the optimum biochar (LBC-600 (1:3)) was prepared at a pyrolysis temperature of 600 °C with the mass ratio of KOH to lotus leaf of 1:3. The optimum pH for the adsorption of the three antibiotics were 5, 4, and 3, respectively. The highest adsorption rates reached 93.32%, 81.44%, and 83.76% for TC-HCl, CTC-HCl, and OTC-HCl with 0.6 g/L of biochar, respectively. At an initial antibiotic concentration of 80 mg·L⁻¹, the maximum adsorption capacities achieved 40.17, 27.76, and 24.6 mg·g⁻¹ for TC-HCl, CTC-HCl, and OTC-HCl, respectively. The adsorption process conformed to the pseudo-second-order kinetic and Langmuir isotherm models, indicating that it was a spontaneous endothermic process and primarily involved monolayer chemical adsorption. This study transformed wetland plant waste into adsorbent and applied it for antibiotic removal, providing a valuable resource utilization strategy and technical support for recycling wetland plant residues and antibiotic removal from water environments. Full article

Natural surfaces, such as lotus leaves, springtail cuticles, and pitcher plant peristomes, exhibit extraordinary wetting behaviors due to their unique surface topographies and chemical compositions. These natural architectures have inspired the development of wettability models and the production of artificial surfaces with tailored wettability for advanced applications. Electrodeposited metallic coatings can imitate the wettability behaviors of natural surfaces, showing superhydrophobic, superoleophobic, or slippery characteristics. Such coatings can significantly enhance corrosion resistance by minimizing water–metal contact and promoting self-cleaning effects. This review presents various strategies for fabricating corrosion-resistant metallic coatings, including different electrodeposition techniques in aqueous or non-aqueous baths, followed by post-treatment procedures and surface functionalization methods. However, despite the promising protective properties demonstrated under controlled laboratory conditions, long-term studies under natural exposure conditions are still lacking, which limits the full assessment of the durability and effectiveness of non-wettable electroplated deposits in practical applications. Full article

Research on bionic superhydrophobic surfaces draws inspiration from the microstructures and wetting mechanisms of natural organisms such as lotus leaves, water striders, and butterfly wings, offering innovative approaches for developing artificial functional surfaces. By synergistically combining micro/nano hierarchical structures with low surface energy chemical modifications, researchers have devised various fabrication strategies—including laser etching, sol-gel processes, electrochemical deposition, and molecular self-assembly—to achieve superhydrophobic surfaces characterized by contact angles exceeding 150° and sliding angles below 5°. These technologies have found widespread applications in self-cleaning architectural coatings, efficient oil–water separation membranes, anti-icing materials for aviation, and anti-biofouling medical devices. This article begins by examining natural organisms exhibiting superhydrophobic properties, elucidating the principles underlying their surface structures and the wetting states of droplets on solid surfaces. Subsequently, it categorizes and highlights key fabrication methods and application domains of superhydrophobic surfaces, providing an in-depth and comprehensive discussion. Full article

Motion control of droplets undergoing collisions with solid surface is required in a number of technological and industrial situations. Droplet dynamics after lifting off is often unpredictable, leading to a major problem in many technologies that droplets move in uncontrolled and potentially undesirable ways. Herein, this work shows that well-designed surface chemistry can produce an accurate control of force transmission to impinging droplets, permitting precise controlled droplet rebounce. The non-wetting surfaces (superhydrophobic), which mimics the water-repellent mechanism of lotus leaves via micro-to-nanoscale hierarchical morphology, with patterned “defect” of extreme wettability (hydrophilic), are synthesized by photolithography using only one inexpensive fluorine-free reagent (methyltrichlorosilane). The contact line of impinging droplet during flatting and receding is free to move on the superhydrophobic region and pinned as it meets with the hydrophilic defect, which introduces a net surface tension force allowing patterned droplet deposition, controlled droplet splitting, and directed droplet rebound. The work also achieves controlled vertical rebound of impinging droplets on inclined surfaces by controlling defect’s size, impact position, and impact velocity. This research demonstrates pinning forces as a general strategy to attain sophisticated droplet motions, which opens an avenue in future explorations, such as matter transportation, energy transformation, and object actuation. Full article

This study employed non-targeted metabolomics to investigate the impact of solid-state fermentation by Aspergillus cristatus on the major non-volatile metabolites in lotus leaves (Folium nelumbinis). Sensory evaluation and metabolomic analysis of the leaves before and after fermentation revealed that the fermentation process significantly enhanced the sensory quality of lotus leaf tea, resulting in a brighter infusion color, a mellow flavor profile, and a notable reduction in astringency. The fermentation also induced the production of several potentially bioactive metabolites, including chlorogenic acid and sphondin, and stimulated the expression of genes related to the phenylpropanoid pathway, thereby promoting the synthesis of chlorogenic acid. Additionally, the fermentation led to a marked decrease in the content of flavonoids, while the content of alkaloids remained relatively unchanged. This study provides a theoretical basis for the in-depth development and utilization of lotus leaves and offers a novel approach to applying microbial fermentation technology to medicinal and edible materials. Full article

Peroxiredoxin (Prx) plays a role in maintaining the balance of intracellular reactive oxygen species. The peroxidase SiPrx gene from the Tianshan Snow Lotus (Saussurea involucrata) has been proved to significantly enhance the stress resistance of plants. In this study, the SiPrx gene was expressed heterogeneously in high-quality herbage Silphium perfoliatum L. (SP). After treatment with NaCl, the transgenic SP only exhibited partial leaf wilting, whereas the wild-type (WT) plants were on the brink of death. Simultaneously, physiological and biochemical assays indicated that under high-salt conditions, the content of malondialdehyde in the transgenic plants was significantly lower than that in the WT plants, while the activity of antioxidant enzymes was significantly higher than that in the WT plants. The expression of the SiPrx gene has been shown to significantly enhance the salt stress resistance of transgenic SP. Furthermore, after treatment at −10 °C for 48 h, the leaves of transgenic plants were able to maintain a certain morphological structure, whereas the WT plants were completely wilted. Physiological and biochemical index measurements indicated that all indicators in the transgenic plants were significantly better than those in the WT plants. Based on these findings, this study plans to overexpress the SiPrx gene extracted from Saussurea involucrata in Comfrey using the Agrobacterium-mediated method and then study its effects on the stress resistance of transgenic SP. The research results indicate that the SiPrx gene shows significant application potential in enhancing the cold resistance and salt tolerance of SP. This study provides a certain research basis and scientific evidence for the mining of stress resistance genes in Saussurea involucrata and the cultivation of new varieties of SP. Full article

Lotus leaves combine both edible and medicinal properties and are rich in nutrients and bioactive compounds. In this study, the lotus leaf tea was prepared using a black tea fermentation process, and the functional components and microbial changes during fermentation were investigated. The results indicated that the activity of polyphenol oxidase showed an initial rise followed by a decline as fermentation progressed, peaked at 3 h with 1.07 enzyme activity units during fermentation. The lotus leaf fermented tea has high levels of soluble sugars (20.92 ± 0.53 mg/g), total flavonoids (1.59 ± 0.05 mg GAE/g), and total polyphenols (41.34 ± 0.87 mg RE/g). Its antioxidant activity was evaluated using ABTS, DPPH, and hydroxyl radical scavenging assays, with results of 18.90 ± 1.02 mg Vc/g, 47.62 ± 0.51 mg Vc/g, and 17.58 ± 1.06 mg Vc/g, respectively. The microbial community also shifted during fermentation. Fusarium played a significant role during the fermentation process. This study demonstrated that the black tea fermentation process improved the functional components and biological activity of lotus leaf tea by optimizing the synergistic effect of enzymatic oxidation and microbial fermentation. The findings not only realized the comprehensive utilization of lotus leaf resources but also provided a foundation for developing innovative functional beverages with enhanced bioactive properties. Full article

Lotus, with about 120 species, is the largest genus of Leguminosae–Loteae. The last global classification recognized 14 sections, of which 13 were then sampled in molecular phylogenetic analyses. The section remaining unsampled is Lotus sect. Benedictella with one critically endangered and possibly extinct species, L. benoistii. This is an annual species known from Mediterranean-type vernal pools in the lowlands of northwestern Morocco that differs from other species of the genus in many-seeded indehiscent fruits with thin pericarp and pinnate leaves with 6–9 leaflets. This species was described in a monospecific genus and later transferred to Lotus on the basis of suggested morphological similarities with three mainly desert annuals from North Africa and Southwest Asia currently classified in Lotus sect. Chamaelotus. We provide the first molecular phylogenetic data on L. benoistii and show that it is far from L. sect. Chamaelotus. It is close to plants traditionally classified in Lotus sect. Lotus that have a center of diversity in Europe and temperate Asia. Phylogenetic analyses of plastid markers showed that L. sect. Chamaelotus belongs to a clade with major taxonomic diversity in Macaronesia, Africa, SW Asia, and Australia. Morphology does not provide arguments against the novel hypothesis on the relationships of L. benoistii. Its possible extinction is a great loss for the breeding programs of the pasture plant L. corniculatus. We provide the first anatomical data of L. benoistii, showing that its non-shattering condition has a peculiar nature that differs from all other instances of indehiscence in Loteae. Full article

The exploration of new pharmacological compounds from endophytic fungi offers infinite possibilities. The aim of this study was to evaluate the antibacterial and antioxidant activities of extracts from the leaves of Ziziphus lotus and five of its endophytic fungi and investigate the chemical diversity of the secondary metabolites produced. Isolated, purified, and molecularly identified endophytes and plant leaves were subjected to ethyl acetate extraction. The antibacterial potential of the extracts was assessed by the disc diffusion method against five bacterial strains: Staphylococcus aureus ATCC 25923; Staphylococcus aureus MU50; Enterococcus faecalis WDCM00009; Escherichia coli ATCC 25922; and Pseudomonas aeruginosa ATCC 27853. DPPH and reducing power tests were performed to assess antioxidant potential. GC–MS analysis was used to identify volatile compounds in extracts. Fungal endophytes were identified as Aspergillus cavernicola, Aspergillus persii, Alternaria alternata, Cladosporium asperlatum, and Fusarium incarnatum–equiseti complex, with respective accession numbers DTO 412-G6, DTO 412-I5, DTO 413-E7, DTO 412-G4, and DTO 414-I2. GC–MS analysis revealed a large number of bioactive compounds. All extracts showed antibacterial activity against at least two of the bacteria tested, and most showed antioxidant activity. The Aspergillus cavernicola extract stood out for its higher phenolic content and higher antioxidant and antibacterial activities in all tests. Full article

Shear emulsifying (SE), ball milling (BM), and autoclave treatment (AT) were utilized for the modification of lotus leaves, and the effects on in vitro gastrointestinal digestion and colonic fermentation of insoluble dietary fiber (IDF) from lotus leaves were compared. Compared with SEIDF and ATIDF, BMIDF released more polyphenols and exhibited better antioxidant capacity during in vitro gastrointestinal digestion. The IDF of lotus leaves changed the gut microbiota composition during in vitro colonic fermentation. SEIDF was beneficial to the diversity of gut microbiota compared with BMIDF and ATIDF. Among the three IDF groups of lotus leaves, six significant differences of OTUs were all in ATIDF; however there was the highest relative abundance of Escherichia-Shigella in ATIDF. In addition, the concentrations of butyric acid and valeric acid produced by SEIDF were significantly higher than that of BMIDF and ATIDF. Overall, SE modification improved the colonic fermentation characteristics of IDFs in lotus leaves more effectively; while BM modification helped to promote the release of polyphenols from IDFs in lotus leaves during in vitro gastrointestinal digestion. The research lays the foundation for the application of the dietary fiber of lotus leaves as a premium fiber additive in functional food. Full article

Friction is ubiquitous in industry and daily life, which not only leads to the wear and tear of equipment and machinery, but also causes a lot of energy waste. Friction is one of the significant factors leading to energy loss in mechanical systems. Therefore, it is essential to minimize friction losses. Creatures in nature have evolved various surfaces with different tribological characteristics to adapt to the environment. By studying, understanding, and summarizing the friction and lubrication regulation phenomena of typical surfaces in nature, various bionic friction regulation theories and methods are obtained to guide the development of new lubrication materials and lubrication systems. This article primarily discusses the study of lubrication mechanisms through biomimetic design, which is mainly divided into chemical approaches, structural strategies, and chemical–structural coupling approaches. From the chemical point of view, this paper mainly summarizes joint lubrication and engineering lubrication in biomedicine, with inspiration from lotus leaves, fish skin, and snake skin, each with unique antifriction structures which are famous for their super hydrophobicity in nature. Finally, chemical–structural coupling simulates the lubrication mechanism of natural organisms from the joint action of biological structures and chemical substances, and is applied to coating design, so as to reduce the friction and wear on coating surfaces, improve the durability and anti-pollution ability of coatings, significantly improve the tribological performance of mechanical systems, promote scientific innovation, and promote energy conservation, emission reduction, and sustainable development. Full article

The continuous release of glucosinolates into the soil by Brassicaceae root exudation is a prerequisite to maintaining toxic levels of breakdown products such as isothiocyanates (ITCs). ITCs influence plant and microbial diversity in ecosystems, while fungi and Rhizobiaceae are particularly injured. Studies explaining the molecular mechanisms of the negative effects are presently limited. Therefore, we investigated the early effects of cyclic ITC goitrin on proteomes of the host and symbiotic Mesorhizobium loti in the nodules of Lotus japonicus and of free-living bacteria. In the nodules, many host proteins had a higher abundance, among them, peroxidases and pathogenesis-related PR-10 proteins functioning in the abscisic-acid-activated signaling pathway. In the microsymbiont, transporter proteins as a prominent group are enhanced; some proteins involved in N-fixation decreased. The proteomes give a report about the loss of immunity suppression resulting in the termination of symbiosis, which initiates nodule senescence. Free-living M. loti are severely damaged, indicated, i.a., by a decrease in transporter proteins, the assumed candidates for goitrin protein complex formation, and high proteolysis. The production of chicoric acid by the accompanying bacteria is inhibitory for M. loti but connected to goitrin elimination, as confirmed by mass spectrometric (MS) analysis. In summary, the nodulation process is severely affected by goitrin, causing nodule dysfunction and failed nodule development. N deficiency conditions leads to yellowish leaves and leaf abscission. Full article

Multiscale nano/micro-structured surfaces with superhydrophobicity are abundantly observed in nature such as lotus leaves, rose petals and butterfly wings, where microstructures typically reinforce mechanical stability, while nanostructures predominantly govern wettability. To emulate such hierarchical structures in nature, various methods have been widely applied in the past few decades to the manufacture of multiscale structures which can be applied to functionalities ranging from anti-icing and water–oil separation to self-cleaning. In this review, we highlight recent advances in nano/micro-structured superhydrophobic surfaces, with particular focus on non-metallic materials as they are widely used in daily life due to their lightweight, abrasion resistance and ease of processing properties. This review is organized into three sections. First, fabrication methods of multiscale hierarchical structures are introduced with their strengths and weaknesses. Second, four main application areas of anti-icing, water–oil separation, anti-fog and self-cleaning are overviewed by assessing how and why multiscale structures need to be incorporated to carry out their performances. Finally, future directions and challenges for nano/micro-structured surfaces are presented. Full article