Search Results (144)

To enhance the thermal management of lithium-ion batteries in new-energy vehicles, various bio-inspired liquid-cooled plate channel designs were investigated to improve hotspot dissipation within the laminar flow regime. A series of three-dimensional numerical simulations were conducted to compare leaf vein-, tree branch-, honeycomb-, and spider web-inspired channels, followed by further optimization to improve thermohydraulic performance. The selected optimized bio-inspired channels were subsequently evaluated against conventional structures. Simulation results indicate that the honeycomb-inspired liquid-cooled plate channel achieved the best performance, followed by the tree branch- and spider web-inspired channels, which exhibited comparable thermohydraulic performance. The leaf vein-inspired channel demonstrated the lowest performance. The key design element for enhanced heat dissipation is the inclusion of longitudinal branch channels, which minimize flow zones with near-zero velocity and effectively mitigate local hotspots. Furthermore, the combination of longitudinal and inclined branch channels can redirect flow direction and enhance fluid mixing. Compared with the conventional channel widely adopted in existing studies, within the Reynolds number range of 260 to 920, the optimized honeycomb-inspired liquid-cooled plate channel achieves a 44.0–49.3% increase in Nusselt number and an 81% enhancement in comprehensive performance metric. Concurrently, thermal resistance is diminished by 2.6–9.2%, and pumping power is reduced by 50.0–56.8%. Full article

Sodium tanshinone IIA sulfonate (STS) injection is clinically used to protect against cerebral ischemia–reperfusion injury (CIRI). This study aimed to establish physiologically based pharmacokinetic–pharmacodynamic (PBPK–PD) models for normal and CIRI rats and to quantitatively characterize the time–concentration–effect relationship, as well as disease-specific mechanistic differences. A middle cerebral artery occlusion rat model was established. STS was administered via the tail vein, and blood samples were collected at serial time points. High-performance liquid chromatography and enzyme-linked immunosorbent assay were used to quantify plasma STS concentrations and inflammatory markers, respectively, whereas equilibrium dialysis was performed to determine protein binding. PK-Sim and Python were used to establish a PBPK model, which was subsequently extrapolated to humans to construct PBPK–PD models. The results showed that plasma STS concentrations were consistently higher in the model rats than in normal rats. STS significantly reduced inflammatory levels in model rats, with a delayed onset of pharmacological effect. Human PBPK model simulations indicated that STS is rapidly eliminated in healthy individuals, while its elimination is reduced under pathological conditions. This study provides a robust modeling framework and methodological reference for dose optimization and prediction of clinical efficacy of STS in the treatment of CIRI. Full article

Deep-to-ultra-deep marine carbonate reservoirs represent an important frontier for hydrocarbon exploration in the Tarim Basin, yet fluid sources and accumulation processes in the Ediacaran (Sinian) succession remain poorly constrained due to extreme burial depth and complex tectono-thermal evolution. Here, we investigate fracture–vug reservoirs of the Sinian Qigebulake Formation in Well LT3 (Tabei Uplift) using an integrated dataset including petrography and cathodoluminescence, fluid-inclusion microthermometry, fluorescence and Raman spectroscopy, in situ major/trace element analysis and C–O–Sr isotope geochemistry, and LA-ICP-MS carbonate U–Pb dating of authigenic minerals. The paragenetic sequence comprises early dolomite (Dol-I), later dolomite (Dol-II), co-precipitated calcite (Cal-I) and quartz (Qtz-I), and late solid bitumen (Bit). Dolomite veins show PAAS-normalized REE patterns and 87Sr/86Sr ratios (0.70918–0.70984; average 0.70942) comparable to the surrounding Sinian marine wall rocks, indicating precipitation from diagenetic fluids dominated by closed-system water–rock interaction. In contrast, Cal-I displays LREE enrichment, pronounced positive Eu anomalies (δEu = 4.91–7.21), radiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.71161–0.71417; average 0.71256), and negative δ¹⁸O_VPDB values (down to −9.439‰), suggesting a large-scale influx of deep-seated, high-temperature, Sr-rich hydrothermal fluids likely linked to fault-assisted fluid circulation. Fluid inclusions record four hydrocarbon charging episodes, evolving from lower- to higher-maturity oils and ultimately to dry gas. Dol-II hosts pale-yellow to pale-blue oil inclusions, whereas Cal-I and Qtz-I predominantly contain deep-blue oil inclusions and methane-rich gas inclusions (Raman peak near 2917 cm⁻¹). Carbonate U–Pb ages constrain dolomite precipitation to the Middle Ordovician (~468–463 Ma) and hydrothermal-related carbonate filling to the Early Triassic (~247–244 Ma). Collectively, these results support a time-resolved evolution in which early diagenetic fluid circulation in a marine carbonate system was overprinted by a later hydrothermal pulse that modified pore structures and thermal conditions, followed by late-stage deep burial leading to cracking of retained liquids, widespread bitumen formation, and methane charging. This framework provides new information on the constraints for fluid–rock interaction and hydrocarbon evolution in deep marine carbonate successions. Full article

To improve the thermal management performance of lithium-ion batteries under high discharge rates and complex operating conditions, a bidirectional parallel bionic flow-channel cooling plate is proposed, with agricultural electric forklifts taken as the representative application background. Numerical simulations were first carried out to compare the heat dissipation characteristics of a conventional leaf-vein flow channel, a unidirectional parallel bionic leaf-vein flow channel, and a bidirectional parallel bionic leaf-vein flow channel. On this basis, the effects of structural parameters on the thermal performance of the liquid cooling plate were systematically investigated using a single-factor analysis method. Furthermore, an orthogonal optimization experiment was performed for four major influencing factors. The results indicate that the unidirectional parallel bionic leaf-vein flow channel improved the coolant coverage relative to the conventional leaf-vein structure; however, owing to the one-sided coolant supply mode, a high-temperature retention zone tended to appear at the end of the channel. In contrast, the bidirectional parallel bionic design effectively alleviated this problem by supplying coolant synchronously from both sides. The main channel width, branch channel width, total channel height, and branch inclination angle were identified as the dominant factors affecting heat dissipation performance. Under the optimized structure and operating condition, the maximum temperature and temperature difference of the battery module were reduced to 29.85 °C and 4.48 °C, respectively. Full article

To improve the thermal management level of power battery packs for new energy vehicles, a novel cooling plate with vein flow channels was proposed. The vein flow channel structure includes bilaterally symmetrical vein-shaped branches, a dovetail-shaped outlet branch, and a side collecting branch. This study conducted a comparative analysis on the hydrodynamic characteristics, heat transfer performance, and pumping power consumption of the novel cold plate, while investigating the influence of flow channel structure on the working fluid distribution and cooling performance of the liquid cold plate (LCP). The results indicate that the dovetail-shaped outlet branch can significantly enhance the flow distribution capacity of the tail branch channels of the LCP, the side collecting channel can improve the overall flow distribution capacity of the branch channels by reducing flow resistance, and the converging main channel can effectively compensate for the insufficient flow distribution capacity at the front part of the LCP by mitigating the uneven distribution at the tail. Additionally, the results demonstrate that the optimized design achieves a 9.5 °C (21%) reduction in the maximum temperature and a 6.3 °C (32%) reduction in the temperature difference. Full article

Marine red algae have been reported to contain a variety of bioactive compounds that are effective in promoting wound-healing processes. In the present study, the wound-healing potential of Grateloupia angusta, which has been rarely explored, was examined using in vitro and in vivo models. A 70% ethanol extract of G. angusta (GAE) was prepared and profiled by liquid chromatography–mass spectrometry (LC-MS). Its effects on the wound-healing process were examined using three different types of cells that participate in this process, namely, Raw264.7, human umbilical vein endothelial cells (HUVECs), and human dermal fibroblasts (HDFs). Various assays including migration/scratch, tube formation, procollagen type I C-peptide production, and Western blotting were used to investigate the therapeutic potential of GAE. In vivo efficacy was tested in a mouse full-thickness skin incision wound model. In HUVECs, GAE increased viability, migration, tube formation, and vascular endothelial growth factor (VEGF) expression. Raw264.7 cells also showed increased VEGF production following GAE treatment. In HDFs, GAE did not affect proliferation and migration, but did increase collagen production. In mice, GAE accelerated wound closure from day 3 to day 5 and increased granulation/matrix with higher proliferating cell nuclear antigen (PCNA) and cluster of differentiation 31 (CD31) expression after a single topical application. In addition, keratin 14 (K14) expression was restored in GAE-treated wound tissues, suggesting improved epidermal re-epithelialization. Taken together, GAE promotes matrix production and pro-angiogenic activity in vitro and improves early wound repair in vivo, suggesting that G. angusta is a promising marine-derived candidate for wound-healing adjuvants. The results of the present study support further bioassay-guided fractionation and mechanistic validation in future studies. Full article

Addressing the thermal management challenges of prismatic aluminum shell lithium battery modules in electric vehicles under high-rate charge–discharge conditions, this study proposes a multi-objective optimization design method for integrated biomimetic liquid cooling plates. By integrating various highly efficient heat transfer structures from nature, including fractal-tree-like networks, leaf vein branching systems, and spider web radial distribution, a novel biomimetic liquid cooling plate topology was constructed. A multi-physics coupled numerical model considering electrochemical heat generation, thermal conduction, convective heat transfer, and thermal stress deformation was established. The NSGA-II algorithm was employed to globally optimize 12 design variables including channel geometric parameters, operating conditions, and structural dimensions, achieving collaborative optimization objectives of maximum temperature minimization, temperature uniformity maximization, pressure drop minimization, and structural lightweighting. The weight coefficients for the four optimization objectives were determined through the Analytic Hierarchy Process (AHP) with verified consistency (CR = 0.02 < 0.10), ensuring rational priority allocation aligned with automotive safety standards. The optimization results demonstrated that compared to the initial design, the optimal solution reduced the maximum temperature under 3C discharge conditions by 9.9% to 34.7 °C, decreased the temperature difference by 31.3% to 3.3 °C, lowered the pressure drop by 24.6% to 2150 Pa, reduced structural mass by 4.0%, and decreased maximum stress by 16.7%. Quantitative comparison with single biomimetic structures under identical boundary conditions showed that the integrated design achieved a 3.3% lower maximum temperature and 25.7% better flow uniformity than the best-performing single structure, demonstrating the synergistic advantages of multi-biomimetic integration. These synergistic performance improvements can be attributed to the hierarchical multi-scale architecture where fractal networks provide macro-scale flow distribution, leaf vein branches ensure meso-scale coverage, and spider web radials achieve micro-scale thermal matching. Long-term cycling tests conducted at 1C/1C rate with 25 ± 1 °C ambient temperature showed that the optimized design maintained a capacity retention rate of 92.3% after 1000 charge–discharge cycles, demonstrating excellent durability. The complex biomimetic channel structure can be fabricated using selective laser melting technology with minimum feature sizes below 0.3 mm, indicating promising manufacturing feasibility. The research findings provide theoretical guidance and technical support for the engineering design of high-performance battery thermal management systems. Full article

The Bagenheigqier medium-sized Pb-Zn deposit is located in central-southern segment of Great Xing’an Range, northeastern China, where its vein-type orebodies are hosted within the structural contact zone between the Lower Permian Dashi Formation and granite porphyry intrusions. Five mineralization stages are divided into skarn (I), oxide (II), quartz-pyrite-arsenopyrite (III), quartz-polymetallic sulfide (IV), and quartz-calcite-pyrite (V). Three types of fluid inclusions (FIs) are identified in Bagenheigeqier Pb-Zn deposit, including daughter mineral-bearing three-phase (SL-type), vapor–liquid two-phase (VL-type), and vapor-rich two-phase (LV-type) FIs. All FI types occur in Stages I–III, with homogenization temperatures (Th) of 423–486, 389–441, 362–408 °C, and salinities of 1.1–49.2, 0.9–43.9 and 0.9–38.8 wt.% NaCl equiv, respectively. Stage IV hosts only VL- and LV-type FIs (Th: 277–319 °C; salinity: 2.1–8.7 wt.% NaCl equiv), whereas Stage V contains exclusively VL-type FIs with Th of 173–214 °C and salinity of 1.2–5.7 wt.% NaCl equiv. The H-O isotopic results of quartz in stage II–IV (δD = −103.5‰–−99.1‰, −115.7‰–−107.8‰ and −121.5‰–−117.2‰; δ¹⁸O_H2O = 4.4‰–7.1‰, 1.1‰–3.5‰ and −4.6‰–−3.5‰) indicate the ore-forming fluids are predominantly of magmatic origin with subordinate meteoric water mixing. Fluid boiling and the mixing of meteoric water may lead to the precipitation of metal. The in situ trace elements analyses indicate that sphalerites in main mineralization stage are enriched in Fe, Mn, Co and In and depleted in Ga and Ge. The calculation results suggest that the sphalerites crystallized under moderate temperature conditions (286–330 °C) and intermediate f_S2 (−10.5 to −9.2) conditions. The geological, fluid inclusion, isotopic and trace element evidences indicate that the Bagenheigeqier deposit is classified as a skarn-type deposit. Full article

Calophyllum spp. infusions are used to treat varicose veins, hemorrhoids, and hypertension. However, the chemical composition and mechanisms of action are poorly understood. Accordingly, the aim of this study was to investigate the phytochemical composition and vascular effects of hydroalcoholic extracts of Calophyllum longifolium. Phytochemical profiling was performed using ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UHPLC-ESI-Q-TOF-MS). Extract effects on rat aortic rings and aortic vascular smooth muscle cells (VSMCs) were evaluated using wire myography and photometric measurement of intracellular Ca²⁺, respectively. UHPLC-ESI-Q-TOF-MS revealed the presence of coumarins, xanthones, flavonoids, triterpenes, and phenolic acids. Coumarin–resveratrol hybrids, such as gut-70 derivatives, were also abundant. In aortic rings from normotensive rats, C. longifolium induced a biphasic vascular response whereby low concentrations (1 μg/mL) produced significant vascular relaxation, whereas high concentrations (100 μg/mL) produced contraction. Blockade of ATP-sensitive (K_ATP) or voltage-gated (K_V) potassium channels attenuated these effects. Furthermore, effects were not observed in preparations preincubated with L-NG-Nitro-L-arginine methyl ester (L-NAME) or in endothelium-denuded rings. In aortic VSMCs, extracts (1 µg/mL) rapidly reduced sarcoplasmic reticulum (SR) Ca²⁺ content. This study provides the first UHPLC-ESI-Q-TOF-MS chemical profile of C. longifolium, revealing diverse bioactive metabolites. It is also the first to demonstrate that C. longifolium exerts an endothelium-dependent, nitric oxide- and Ca²⁺-mediated biphasic effect on vascular function. Taken together, these findings highlight C. longifolium as a potential novel source of vasculotropic phytopharmaceuticals. Full article

Heat exchangers are central to energy and process industries, yet performance is bounded by the trade-off between higher heat transfer and greater pressure drop. This review targets indirect-type heat exchangers and organizes bioinspired strategies through a multi-scale lens of surface, texture, and network scales. It provides a structured comparison of their thermo-hydraulic behaviors and evaluation methods. At the surface scale, control of wettability and liquid-infused interfaces suppresses icing and fouling and stabilizes condensation. At the texture scale, microstructures inspired by shark skin and fish scales regulate near-wall vortices to balance drag reduction with heat-transfer enhancement. At the network scale, branched and bicontinuous pathways inspired by leaf veins, lung architectures, and triply periodic minimal surfaces promote uniform distribution and mixing, improving overall performance. The survey highlights practical needs for manufacturing readiness, durability, scale-up, and validation across operating ranges. By emphasizing analysis across scales rather than reliance on a single metric, the review distills design principles and selection guidelines for next-generation bioinspired heat exchangers. Full article

Arteriovenous malformations (AVMs) are fast-flow vascular malformations formed by direct artery-to-vein shunts without an intervening capillary bed, which increases the risk of hemorrhage and organ-specific damage. A synthesis of recent advances shows that AVMs arise from interplay between germline susceptibility (ENG, ACVRL1, SMAD4, RASA1, EPHB4), somatic mosaicism (KRAS, MAP2K1, PIK3CA), perturbed signaling (TGF-β/BMP, Notch, VEGF, PI3K/AKT, RAS/MAPK), hemodynamic stress, and inflammation. Multimodal imaging—digital subtraction angiography (DSA), MRI/MRA with perfusion and susceptibility sequences, CTA, Doppler ultrasound, and 3D rotational angiography—underpins diagnosis and risk stratification, while arterial spin labeling and 4D flow techniques refine hemodynamic assessment. Management is individualized and multidisciplinary, combining endovascular embolization, microsurgical resection, and stereotactic radiosurgery (SRS); a non-surgical approach and monitoring remain reasonable for some asymptomatic AVMs. Device and technique innovations (detachable-tip microcatheters, pressure-cooker approaches, and newer liquid embolics such as PHIL and Squid) have broadened candidacy, and precision-medicine strategies, including pathway-targeted pharmacotherapy, are emerging for syndromic and somatic-mutation–driven AVMs. Animal models and computational/radiomics tools increasingly guide hypothesis generation and treatment selection. We outline practical updates and future priorities: integrated genomic-imaging risk scores, genotype-informed medical therapy, rational hybrid sequencing, and long-term outcome standards focused on hemorrhage prevention and quality of life. Full article

Quartz purification is a key driver of the silicon-based industrial sector. This study used typical vein quartz from Jiangxi Province, China as a raw material to systematically investigated the occurrence states of impurities and conducted an in-depth chemical purification study. The effects of various parameters on impurity removal via acid leaching were investigated. The results revealed distinct removal patterns: independent minerals were effectively removed with low-concentration acid; inclusion impurities were efficiently eliminated by optimizing temperature and acid concentration; and lattice impurities proved resistant to removal. The optimal acid-leaching conditions were identified as follows: 80 °C leaching temperature, mixed acid system of HF-HCl-H₂SO₄ (volume ratio 1:1:1), 7 wt% acid concentration, 6 h leaching time, and a 1:1 solid–liquid ratio. The removal efficiencies of Al, K, and Fe reached 77.0%, 87.5%, and 80.0%, respectively, and the product (the quartz particles after acid leaching) purity was elevated to 99.92%. Furthermore, this study clarified the influence of acid-leaching parameters on purifying high-aluminum low-iron quartz sand, providing a valuable theoretical basis and technical reference for the deep processing of similar quartz ores. Full article

Brain arteriovenous malformations (bAVMs) consist of a tangled nidus of abnormal dilated vessels characterized by direct connections between arteries and veins that lack an intervening capillary bed, creating a high-to-low flow pressure system that is predisposed to spontaneous hemorrhage with significant associated neurologic morbidity and mortality. Treatment options for bAVMs include the following: surgical resection, intravascular embolization to obliterate blood flow through the AVM, and radiosurgery. Understanding the molecular mechanisms of bAVM formation and factors that predispose it to hemorrhage can lead to novel treatments that can improve the prognosis for patients. This review summarizes emerging insights into the complex and dynamic molecular mechanisms of bAVMs. Dysregulation in key VEGF, TGF-β/BMP9/10–ENG–ALK1–SMAD4, Notch, and MAPK/ERK signaling pathways drive abnormal angiogenesis in both syndromic and sporadic forms, with KRAS/BRAF/MAPK21 mutations specifically linked to the latter. Advances in bAVM-induced animal models have corroborated many of the genetic profiles found in humans, and they continue to provide novel insights into bAVM mechanisms. Collectively, these mechanistic findings are guiding translational advances, with targeted therapies and liquid biopsy approaches emerging as avenues for precision treatment and improved patient outcomes. Full article

High-purity quartz is a key material for photovoltaics, semiconductors, and optical fibers. The raw material for high-purity quartz mainly comes from natural crystal and pegmatite. It is an attractive research field to excavate alternative feedstocks for traditional materials. Quartz conglomerate is a coarse-grained, clastic sedimentary rock that is cemented by a secondary silica or siliceous matrix. Economically, quartz conglomerate is gaining attention as a strategic alternative to depleting high-grade quartz veins and pegmatites. In this study, high-purity quartz was prepared by purifying quartz conglomerate from Jimunai, Altay, Xinjiang. The method combined high-temperature roasting, water quenching, and ultrasonic-assisted acid leaching. The effects of process parameters on purification efficiency were systematically investigated with the aid of XRD, SEM-EDS, and ICP-OES quantitative element detection. Many cracks formed on the quartz during roasting and quenching. These cracks exposed gap-filling impurities. Gas–liquid inclusions were removed, improving acid leaching. Under optimal ultrasonic-assisted acid leaching conditions (80 °C, 4 h, 10% oxalic acid + 12% hydrochloric acid, 180 W), the Fe content decreased to 6.95 mg/kg, with an 85.6% removal rate. The total impurity content decreased to 210.43 mg/kg. The SiO₂ grade increased from 99.77% to 99.98%. Compared to traditional acid leaching, ultrasonic-assisted acid leaching improved Fe removal and reduced environmental pollution. Full article

Quercus suber L. (Q. suber) is an ecologically and industrially valuable species, yet faces challenges in propagation in China. This study optimized somatic embryogenesis (SE) protocols using two-year-old Q. suber leaves, focusing on petioles and leaf veins as the most responsive explants, with May as the optimal sampling time. The MSSH medium (a combination of Murashige and Skoog Medium (MS) major elements and Schenk and Hildebrandt Medium (SH) minor elements and vitamins) under darkness maximized transdifferentiation. Additionally, the highest callus induction was achieved with 0.50 mg/L 6-benzyladenine (6-BA) and 1.00 mg/L 1-Naphthaleneacetic acid (NAA). Liquid culture with 1.00 g inoculum and 0.50 mg/L 6-BA + 0.20 mg/L NAA achieved the best proliferation. Redifferentiation peaked at 0.15 mg/L NAA + 0.20 mg/L 6-BA. Transcriptome profiling identified 4534 differentially expressed genes (DEGs) between embryogenic callus (E1) and global embryos (E2), with key pathways linked to cell wall remodeling, stress responses, and photosynthesis. Key regulators identified during the early stage of callus redifferentiation include cytokinin oxidase 3 (CKX3), gibberellin-responsive protein (GH3.6), and pectin lyase 5 (PL5), among others. This study provides insights into efficient SE of Q. suber and the genes underlying early callus redifferentiation, laying the groundwork for future research. Full article