Search Results (131)

The growing need for developing safer and more effective methods for obtaining enantiomers of chiral compounds, particularly those with pharmacological activity, highlights the potential of biocatalysis as an appropriate pharmaceutical research direction. However, low catalytic activity and stability of free enzymes are often among the substantial limitations to the wide application of biocatalysis. Therefore, to overcome these obstacles, new technological procedures are being designed. In this study, we present optimized protocols for the immobilization of Candida antarctica lipase B (CALB) on an octyl- agarose support, ensuring high enantioselectivity in an organic reaction medium. The immobilization procedures (with drying step), including buffers with different pH values and concentrations, as well as the study of the influence of temperature and immobilization time, were presented. It was found that the optimal conditions were provided by citrate buffer with a pH of 4 and a concentration of 300 mM. The immobilized CALB on the octyl-agarose support exhibited high catalytic activity in the kinetic resolution of (R,S)-1-phenylethanol via enantioselective transesterification with isopropenyl acetate in 1,2-dichloropropane (DCP), as a model reaction for lipase activity monitoring on an analytical scale. HPLC analysis demonstrated that the (R)-1-phenylethyl acetate was obtained in an enantiomeric excess of ee_p > 99% at a conversion of approximately 40%, and the enantiomeric ratio was E > 200. Thermal and storage stability studies performed on the immobilized CALB octyl-agarose support confirmed its excellent stability. After 7 days of thermal stability testing at 65 °C in a climatic chamber, the (R)-1-phenylethyl acetate was characterized by enantiomeric excess of ee_p > 99% at a conversion of around 40% (similar values of catalytic parameters to those achieved using a non-stored lipase). The documented high catalytic activity and stability of the developed CALB-octyl-agarose support allow us to consider it as a useful tool for enantioselective transesterification in organic medium. Full article

Hydroxytyrosol (HT), the primary phenolic compound in virgin olive oil, has notable cardiovascular benefits, particularly in preventing low-density lipoprotein (LDL) oxidation. However, its hydrophilicity limits its solubility and integration into lipid-based formulations. This study aimed to enhance its lipophilicity by synthesizing hydroxytyrosyl eicosapentaenoate (HT-EPA), a derivative of HT and eicosapentaenoic acid (EPA), using a one-step enzymatic catalysis with lipase B from Candida antarctica (CALB). The reaction, performed as a suspension of HT in ethyl eicosapentaenoate (Et-EPA) (1:9 molar ratio) under vacuum, achieved higher yields and shorter reaction times than previously reported, with a purity exceeding 98%, confirmed by ¹H-NMR. For the first time, the antioxidant capacity of HT-EPA in comparison with other natural antioxidants was assessed using the FRAP assay, while its oxidative stability in an omega-3-rich oil matrix was evaluated via the Rancimat method. HT-EPA and hydroxytyrosyl acetate (HT-Ac) displayed antioxidant activity comparable to HT but significantly higher than α-tocopherol, a common food antioxidant. Given the scarcity of effective lipid-soluble antioxidants, HT-EPA represents a promising candidate for omega-3 nutraceuticals, offering enhanced stability and potential health benefits. This study provides a simple, efficient, and scalable strategy for developing functional lipid-based formulations with cardioprotective potential by improving HT solubility while preserving its antioxidant properties. Full article

The current paper reports the asymmetric synthesis of a focused library of enantiostructured triacylglycerols (TAGs) constituting a potent drug of the NSAID type (ibuprofen or naproxen) along with a pure bioactive n-3 polyunsaturated fatty acid (PUFA) intended as a novel type of prodrug. In this second category, a TAG prodrug of the terminal sn-1 or sn-3 position of the glycerol skeleton is acylated with a single saturated medium-chain fatty acid (C6, C8, C10, or C12), and another with the drug entity; the PUFA (EPA or DHA) is located in the sn-2 position. This was accomplished by a six-step chemoenzymatic approach, two of which were promoted by a lipase, starting from enantiopure (R)- and (S)-solketals. The highly regioselective immobilized Candida antarctica lipase (CAL-B) played a crucial role in the regiocontrol of the synthesis. The most challenging key step involved the incorporation of the drugs that were activated as oxime esters by the lipase exclusively in the terminal position of glycerol that is protected as a benzyl ether. All combinations, a total of 32 such prodrug TAGs, were prepared, isolated, and fully characterized, along with 24 acylglycerol intermediates, obtained in very-high-to-excellent yields in the majority of cases. Full article

Enzymes play an essential role in many different industries; however, their operating conditions are limited due to the loss of enzyme activity in the presence of proteases and at temperatures significantly above physiological conditions. One way to improve the stability of these enzymes against high temperatures and proteases is to encapsulate them in protective shells or virus-like particles. This work presents a streamlined, three-step, cell-free protein synthesis (CFPS) procedure that enables rapid in vitro enzyme production, targeted encapsulation in protective virus-like particles (VLPs), and facile purification using a 6× His-tag fused to the VLP coat protein. This process is performed in under 12 h and overcomes several limitations of enzyme encapsulation, such as the control of packing density, speed, and complexity of the process. Here, we encapsulate the enzyme Candida antarctica lipase B in the VLP from the bacteriophage Qβ, while in the presence of a linking RNA aptamer. The encapsulated enzymes largely retained their activity in comparison to the free enzymes. Additionally, when subjected to 90 °C temperatures or 5 h incubation with proteases, the encapsulated enzymes maintained their activity, whereas the free enzymes lost their activity. In this work, we also demonstrate control over packing density by achieving packing densities of 4.7 and 6.5 enzymes per VLP based off the concentration of enzyme added to the encapsulation step. Full article

The efficient expression and excellent thermal stability of Candida antarctica lipase B (CALB) are crucial for its industrial production. In this study, through genetic engineering and rational design, while preserving the superior catalytic properties of CALB, we optimized the induction pathway using glycerol as the sole carbon source; moreover, the thermal stability sites of CALB were predicted and optimized. The results revealed that the level of CALB expression in this expression system reached 2.27 g/L under the condition of a 5 L fermenter. The Tm value of the CALB-Q231F increased by 10 °C. Moreover, after thermal inactivation at 80 °C for 1 h, the retention rate of esterification enzymatic activity over 24 h was 2.99 times that of wild-type (WT) CALB, whereas the retention rate of hydrolytic enzymatic activity was 2.23 times that of WT CALB. In this study, a non-methanol-induced Pichia pastoris expression system was successfully designed and constructed; a non-methanol-induced CALB-producing strain, X33-pGAPZ(Mα) A-CalB-Q231F, with high thermal stability and a high expression level was obtained, which can be used for the development of industrial enzymes. Full article

This report describes the asymmetric synthesis of a focused library of enantiopure structured triacylglycerols (TAGs) comprised of a single saturated fatty acid (C6, C8, C10, C12, C14 or C16), a pure bioactive n-3 polyunsaturated fatty acid (EPA or DHA) and a potent drug (ibuprofen or naproxen) intended as a novel type of prodrug. One of the terminal sn-1 or sn-3 positions of the glycerol backbone is occupied with a saturated fatty, the remaining one with a PUFA, and the drug entity is present in the sn-2 position. This was accomplished by a six-step chemoenzymatic approach starting from enantiopure (R)- and (S)-solketals. The highly regioselective immobilized Candida antarctica lipase (CAL-B) played a crucial role in the regiocontrol of the synthesis. All combinations, a total of 48 such prodrug TAGs, were prepared, isolated and fully characterized, along with 60 acylglycerol intermediates, obtained in very high to excellent yields. Full article

The immobilization of enzymes, especially lipases, presents a significant challenge in contemporary biotechnology due to their wide-ranging application in industrial processes. Given the array of available techniques for enzyme immobilization, this study aimed to immobilize Candida antarctica B (CALB) lipase within silica xerogel and sonogel matrices obtained through the sol–gel technique. Polyethylene glycol (PEG) was incorporated as an additive, with tetramethylorthosilicate (TMOS) serving as the silica precursor. This study assessed the operational stability, storage stability, and thermal properties of the resulting supports. Results revealed that both sonogel and xerogel supports, supplemented with PEG, maintained storage stability above 50% throughout a 365-day period. Moreover, operational stability tests demonstrated that the xerogel support could be reused up to 21 times, while the sonogel support exhibited 10 reuses. Thermal analysis further highlighted a reduction in the deactivation constant and an elongation of the half-life time for both supports. These observations suggest that the supports effectively shield the enzyme from thermal inactivation. Overall, these findings underscore the potential utility of PEG-enhanced sonogel and xerogel supports in various industrial enzyme applications, providing valuable insights into their operational, storage, and thermal stability. Full article

Rapeseed oil is a widely consumed edible oil that contains varieties of beneficial micronutrients such as tocopherols and phytosterols; however, the high acid value due to increased free fatty acid can imperil the oil quality and safety. This paper proposed the enzymatic deacidification for high-acid rapeseed oil and simultaneous production of functional diacylglycerols (DAGs) catalyzed by self-made immobilized lipase CALB@MCM-41-C₈. The results indicate that the carrier of molecular sieve MCM-41 exhibited a sufficient surface area of 1439.9 m²/g and a proper pore size of 3.5 nm, promoting the immobilization of lipase CLAB. Under the optimal reaction conditions, the acid value of rapeseed oil was largely decreased from 15.3 mg KOH/g to 1.7 mg KOH/g within 3 h, while DAG content was increased from 1.2% to 40.2%. The antioxidant stability of rapeseed oil was also increased from 4.3 h to 7.6 h after enzymatic deacidification. Besides, the deacidified rapeseed oil exhibited fatty, bitter almond aromas, compared to the picked-vegetable, spicy, and pungent aromas for high-acid oil. Finally, the catalytic stability and applicability of CALB@MCM-41-C₈ was validated, thus demonstrating the great potential of CALB@MCM-41-C₈ in green refining of edible oils and sustainable synthesis of functional lipids. Full article

This study aimed to explore the capacity of immobilized lipases on the acetylation of six aglycon flavonoids, namely myricetin, quercetin, luteolin, naringenin, fisetin and morin. For this purpose, lipase B from Candida antarctica (CaLB) and lipase from Thermomyces lanuginosus (TLL) were immobilized onto the surface of ZnOFe nanoparticles derived from an aqueous olive leaf extract. Various factors affecting the conversion of substrates and the formation of monoesterified and diesterified products, such as the amount of biocatalyst and the molar ratio of the substrates and reaction solvents were investigated. Both CaLB and TLL-ZnOFe achieved 100% conversion yield of naringenin to naringenin acetate after 72 h of reaction time, while TLL-ZnOFe achieved higher conversion yields of quercetin, morin and fisetin (73, 85 and 72% respectively). Notably, CaLB-ZnOFe displayed significantly lower conversion yields for morin compared with TLL-ZnOFe. Molecular docking analysis was used to elucidate this discrepancy, and it was revealed that the position of the hydroxyl groups of the B ring on morin introduced hindrances on the active site of CaLB. Finally, selected flavonoid esters showed significantly higher antimicrobial activity compared with the original compound. This work indicated that these lipase-based nanobiocatalysts can be successfully applied to produce lipophilic derivatives of aglycon flavonoids with improved antimicrobial activity. Full article

This study presents the potential role of deep eutectic solvents (DESs) in a lipase-catalyzed hydrolysis reaction as a co-solvent in an aqueous solution given by a phosphate buffer. Ammonium salts, such as choline chloride, were paired with hydrogen bond donors, such as urea, 1,2,3-propanetriol, and 1,2 propanediol. The hydrolysis of p-nitrophenyl laureate was carried out with the lipase Candida antarctica Lipase B (CALB) as a reaction model to evaluate the solvent effect and tested in different DES/buffer phosphate mixtures at different $\% w/w$. The results showed that two mixtures of different DES at 25 $\% w/w$ were the most promising solvents, as this percentage enhanced the activities of CALB, as evidenced by its higher catalytic efficiency ($\frac{k_{cat}}{K_M}$). The solvent analysis shows that the enzymatic reaction requires a reaction media rich in water molecules to enable hydrogen-bond formation from the reaction media toward the enzymatic reaction, suggesting a better interaction between the substrate and the enzyme-active site. This interaction could be attributed to high degrees of freedom influencing the enzyme conformation given by the reaction media, suggesting that CALB acquires a more restrictive structure in the presence of DES or the stabilized network given by the hydrogen bond from water molecules in the mixture improves the enzymatic activity, conferring conformational stability by solvent effects. This study offers a promising approach for applications and further perspectives on genuinely green industrial solvents. Full article

Herein we present the biocatalysed preparation of a mono-N-carbamate-protected precursor of antitumoral Nutlin-3a through enantioselective alkoxycarbonylation of meso-1,2-disubstituted-1,2-diaminoethane using enzyme lipases and dialkyl carbonates as acylating agents. A series of supported or free lipase enzymes were screened in combination with commercially available diallyl, diethyl and dimethyl carbonates. The reactions were conducted at different temperatures, for different reaction times and with variable co-solvent systems to evaluate the effects on the enzyme catalytic activity. The best results in terms of conversion, enantiomeric excess and yield were obtained when lipase from Candida antarctica B (CAL-B) was used with diallyl carbonate (DAC) when conducting the reaction solventless at 75 °C. Full article

The use of lipase immobilized on an octyl-agarose support to obtain the optically pure enantiomers of chiral drugs in reactions carried out in organic solvents is a great challenge for chemical and pharmaceutical sciences. Therefore, it is extremely important to develop optimal procedures to achieve a high enantioselectivity of the biocatalysts in the organic medium. Our paper describes a new approach to biocatalysis performed in an organic solvent with the use of CALB-octyl-agarose support including the application of a polypropylene reactor, an appropriate buffer for immobilization (Tris base—pH 9, 100 mM), a drying step, and then the storage of immobilized lipases in a climatic chamber or a refrigerator. An immobilized lipase B from Candida antarctica (CALB) was used in the kinetic resolution of (R,S)-flurbiprofen by enantioselective esterification with methanol, reaching a high enantiomeric excess (ee_p = 89.6 ± 2.0%). As part of the immobilization optimization, the influence of different buffers was investigated. The effect of the reactor material and the reaction medium on the lipase activity was also studied. Moreover, the stability of the immobilized lipases: lipase from Candida rugosa (CRL) and CALB during storage in various temperature and humidity conditions (climatic chamber and refrigerator) was tested. The application of the immobilized CALB in a polypropylene reactor allowed for receiving over 9-fold higher conversion values compared to the results achieved when conducting the reaction in a glass reactor, as well as approximately 30-fold higher conversion values in comparison with free lipase. The good stability of the CALB-octyl-agarose support was demonstrated. After 7 days of storage in a climatic chamber or refrigerator (with protection from humidity) approximately 60% higher conversion values were obtained compared to the results observed for the immobilized form that had not been stored. The new approach involving the application of the CALB-octyl-agarose support for reactions performed in organic solvents indicates a significant role of the polymer reactor material being used in achieving high catalytic activity. Full article

This report demonstrates the first asymmetric synthesis of enantiopure structured triacylglycerols (TAGs) of the ABC type presenting three non-identical fatty acids, two of which are unsaturated. The unsaturated fatty acids included monounsaturated oleic acid (C18:1 n-9) and polyunsaturated linoleic acid (C18:2 n-6). This was accomplished by a six-step chemoenzymatic approach starting from (R)- and (S)-solketals. The highly regioselective immobilized Candida antarctica lipase (CAL-B) played a crucial role in the regiocontrol of the synthesis. The synthesis also benefited from the use of the p-methoxybenzyl (PMB) ether protective group, which enabled the incorporation of two different unsaturated fatty acids into the glycerol skeleton. The total of six such TAGs were prepared, four constituting the unsaturated fatty acids in the sn-1 and sn-2 positions, with a saturated fatty acid in the remaining sn-3 position of the glycerol backbone. In the two remaining TAGs, the different unsaturated fatty acids accommodated the sn-1 and sn-3 end positions, with the saturated fatty acid present in the sn-2 position. Enantiopure TAGs are urgently demanded as standards for the enantiospecific analysis of intact TAGs in fats and oils. Full article

Ursodeoxycholic acid (UDCA) and acetoacetate are natural compounds present in the human intestine and blood, respectively. A number of studies highlighted that besides their well-known primary biological roles, both compounds possess the ability to influence a variety of cellular processes involved in the etiology of various diseases. These reasons suggested the potential of acetoacetate–UDCA hybrids as possible therapeutic agents and prompted us to develop a synthetic strategy to selectively derivatize the hydroxyl groups of the bile acid with acetoacetyl moieties. 3α-acetoacetoxy UDCA was obtained (60% isolated yield) via the regioselective transesterification of methyl acetoacetate with UDCA promoted by the Candida antarctica lipase B (CAL-B). 3α,7β-bis-acetoacetoxy UDCA was obtained instead by thermal condensation of methyl acetoacetate and UDCA (80% isolated yield). This bis-adduct was finally converted to the 7β-acetoacetoxy UDCA (82% isolated yield) via CAL-B catalyzed regioselective alcoholysis of the ester group on the 3α position. In order to demonstrate the value of the above new hybrids as UDCA-based scaffolds, 3α-acetoacetoxy UDCA was subjected to multicomponent Biginelli reaction with benzaldehyde and urea to obtain the corresponding 4-phenyl-3,4-dihydropyrimidin-2-(1H)-one derivative in 65% isolated yield. Full article

The lipases from Thermomyces lanuginosus (TLL) and Candida antarctica (B) (CALB) were immobilized on octyl-agarose beads at 1 mg/g (a loading under the capacity of the support) and by overloading the support with the enzymes. These biocatalysts were compared in their stabilities in 10 mM of sodium phosphate, HEPES, and Tris-HCl at pH 7. Lowly loaded CALB was more stable than highly loaded CALB preparation, while with TLL this effect was smaller. Phosphate was very negative for the stability of the CALB biocatalyst and moderately negative using TLL at both loadings. The stability of the enzymes in HEPES and Tris-HCl presented a different response as a function of the enzyme loading (e.g., using lowly loaded CALB, the stabilities were similar in both buffers, but it was clearly smaller in HEPES using the highly loaded biocatalysts). Moreover, the specific activity of the immobilized enzymes versus p-nitrophenol butyrate, triacetin and R- or S-methyl mandelate depended on the buffer, enzyme loading, and interaction between them. In some cases, almost twice the expected activity could be obtained using highly loaded octyl-CALB, depending on the buffer. A co-interaction between the effects on enzyme activity and the specificity of support enzyme loading and buffer nature was detected. Full article