Search Results (50)

With the continuous integration of rail transit and urban development, station-centered high-density construction often expands outward and forms a point-axis development pattern. As a result, the influence areas of adjacent stations increasingly overlap, and passenger flow distribution within these shared catchment areas is jointly associated with walking time costs and built-environment differences. Taking Xiamen rail transit as a case, this study constructs a framework for delineating adjacent-station overlapping catchment areas, measuring passenger flow contribution, interpreting built-environment associations, and deriving planning strategies. Isochrone analysis and population heat data are used to identify overlapping areas and estimate passenger flow differences, while ordinary least squares (OLS) regression and XGBoost models are used to estimate distance–ring contribution weights and interpret nonlinear built-environment associations. The results show that distance decay, development intensity, land-use mix, road-network accessibility, public-service facilities, and interface conditions are jointly associated with passenger flow allocation between adjacent stations. The study shifts station–area research from single-station catchments to multi-station overlapping spaces, provides a method for measuring passenger flow differences at a fine-grained spatial level, and offers planning support for coordinated station–city integration, differentiated pedestrian and feeder-facility allocation, and passenger flow guidance in high-density urban areas. Full article

Background: Extracorporeal cardiopulmonary resuscitation (ECPR) can improve outcomes following refractory out-of-hospital cardiac arrest (OHCA); however, access is constrained by geography and resources. This study compared two strategies against the current system in Nara Prefecture, Japan: a two-stage hospital model using chest-pain network hospitals as ECPR-initiation sites, and a prehospital ECPR model using physician-staffed ambulances from two extracorporeal membrane oxygenation (ECMO)-ready hospitals. Methods: A geographic information system (GIS)-based simulation was conducted using emergency medical service (EMS) records of witnessed cardiac-origin OHCA cases (2017–2022). Isochrone analyses estimated areas reachable within a 60 min arrest-to-ECMO target. In the two-stage hospital model, patients located within a 15 min transport radius from chest-pain network hospitals were considered geographically covered. In the prehospital ECPR model, a physician-staffed ambulance was assumed to reach arrest sites within a 25 min travel-time radius from ECMO-ready hospitals. The study outcome was geographic coverage, defined as the proportion of cases within each service area; the two strategies were compared using McNemar’s test for paired proportions. Results: Among 1476 included cases, the coverage rate was as follows: current system, 28.7%; two-stage hospital model, 65.2%; prehospital model, 70.4% (p < 0.001). Certain eastern and southern mountainous regions remained outside both coverage areas. Conclusions: Using real-world EMS data, a mobility-focused prehospital ECPR strategy provided broader potential geographic access without requiring additional fixed hospital infrastructure than expanding hospital-based initiation sites. Optimization of prehospital deployment may represent a geographically feasible approach to expanding ECPR access in mixed urban–rural regions, though operational feasibility and cost-effectiveness require further evaluation. Full article

The rheological behavior of rock masses governs long-term stability, yet the time-dependent properties of grouted structural planes remain insufficiently quantified. Graded shear creep tests were conducted on artificially split sandstone structural planes with controlled grout thicknesses, complemented by scanning electron microscopy (SEM), to clarify creep evolution and long-term shear strength. The results show that the total shear creep displacement of grouted specimens exhibits limited sensitivity to grout thickness, while the ratio of long-term to theoretical shear strength increases by approximately 10% at a grout thickness of 2 mm; this strengthening effect, however, diminishes at greater thicknesses. Moreover, the creep rate evolution of grouted specimens differs fundamentally from that of ungrouted specimens, with about 60% of grouted samples exhibiting an accelerated creep stage characterized by a U-shaped rate curve. The failure mode shifts from asperity-controlled slip in ungrouted structural planes to damage concentrated at the grout–rock interface in grouted specimens. SEM observations further reveal that micro-defects at this interface initiate and propagate cracks, ultimately governing the macroscopic creep failure process. Overall, this study establishes an isochronous curve-based method for determining long-term strength and demonstrates that interface micromechanics critically control the long-term performance of grouted rock masses. These findings provide practical guidance for grouting reinforcement in underground engineering. Full article

Gangue backfilling has become an important technique for promoting environmentally friendly and low-carbon coal mining. The long-term creep behavior of cemented backfill plays a critical role in maintaining stope stability and controlling surface subsidence during long-term service. Although considerable research has been conducted on cemented tailings backfill, systematic investigations on the triaxial creep evolution, long-term strength characteristics, confining pressure effects, and the applicability of the classical Burgers model for gangue–gypsum cemented backfill under engineering-relevant confining pressures remain limited. In this study, the experimental scheme was designed based on field monitoring data from practical backfill mining operations, which indicate that the in situ backfill generally remains stable without significant deformation or instability under normal working conditions. Multi-stage loading triaxial creep tests were conducted on gangue–gypsum cemented backfill under confining pressures of 1, 2, 3, and 4 MPa. The creep deformation characteristics were analyzed using Chen’s superposition method, while the long-term strength was computed via inflection point method of isochronous stress–strain curves. The parameters of the Burgers creep model were identified using the Levenberg–Marquardt optimization algorithm, and numerical verification was performed using FLAC3D. Our findings demonstrate that the creep deformation process of the backfill consists of three typical stages: instantaneous deformation, attenuated creep, and steady-state creep, and no accelerated creep was observed within the applied stress range. The absolute creep strain surges nonlinearly with increasing stress level (S_L), whereas higher confining pressure significantly suppresses the creep response of the material. Within the investigated stress range, the backfill exhibits mainly linear viscoelastic behavior, and its critical long-term strength is not less than 0.9 times the failure deviatoric stress (qf). Although confining pressure enhances the long-term strength, the strengthening effect weakens as the confining pressure increases. Model fitting outcomes imply that Burgers model precisely describes the creep behavior of gangue–gypsum cemented backfill under all test conditions, with correlation coefficients (R²) exceeding 0.97. The identified parameters show systematic variation with S_L, reflecting stiffness degradation and viscous evolution during loading. Numerical simulation results agree well with the experimental data, providing theoretical guidance for mixture proportion optimization, long-term stability evaluation, and stope support parameter design in gangue backfill mining engineering. Full article

Carsharing has long supported trip purposes typically made by private vehicles, with grocery shopping especially benefiting from the carrying capacity of a personal vehicle. BlueLA is a one-way, station-based electric vehicle (EV) carsharing service in Los Angeles aimed at improving access in low-income neighborhoods. We hypothesize that BlueLA improves grocery access for underserved households by increasing their spatial-temporal reach to diverse grocery store types. We test two hypotheses: (1) accessibility from BlueLA stations to grocery stores varies by store type, traffic conditions, and departure times; and (2) Standard (general population) and Community (low-income) members differ in perceived grocery access and station usage. Using a mixed-methods approach, we integrate walking and driving isochrones, store data (n = 5888), trip activity data (n = 59,112), and survey responses (n = 215). Grocery shopping was a key trip purpose, with 69% of Community and 61% of Standard members reporting this use. Late-night grocery access is mostly limited to convenience stores, while roundtrips to full-service stores range from 55 to 100 min and cost USD 12 to USD 20. Survey data show that 84% of Community and 71% of Standard members reported improved grocery access. The findings highlight the importance of trip timing and the potential for carsharing and retail strategies to improve food access. Full article

S-wave seismic data are unaffected by natural gas trapped in strata, making them a valuable tool to study evaporite facies comparing to P-wave data. S-wave seismic data were utilized to construct an isochronous framework and analyze evaporite facies by seismic sedimentology methods in the Quaternary biogenic gas-bearing Taidong area, Sanhu Depression, Qaidam Basin, NW China, with calibration from wireline logs, geochemical evidences, and modern analogs. Techniques of phase rotation, frequency decomposition, R (Red), G (Green), B (Blue) fusion, and stratal slices were integrated to reconstruct seismic geomorphological features. Linear and sub-circular morphologies, resembling those observed in modern saline pans such as Lake Chad, were identified. Observations from Upper Pleistocene outcrops of anhydrite and halite at Yanshan (east of the Taidong area), along with lithological and paleo-environmental records from boreholes SG-5, SG-1, and SG-1b (northwest of the Taidong area), support the seismic findings. The slices generated from the S-wave seismic data indicate a progressive increase in the occurrence of evaporite features from the K2 standard zone upwards. The vertical occurrence of evaporite facies in the Taidong area increases, which coincides with the contemporary regional and global arid paleo-environmental changes. The interpretation of Quaternary stratal slices reveals a transition from a freshwater lake to brackish, saline, and finally, a dry saline pan, overlaid by silt. This analysis provides valuable insights into locating evaporites as cap rocks for biogenic gas accumulation and also into mining the evaporite mineral resources in shallow layers of the Taidong area. Full article

Molybdenite Re–Os and zircon U–Pb isotopic data are first obtained from the stockwork and disseminated-style gold-bearing ores and the fine-grained granite hosting these ores in the Xiawolong gold mine, respectively, which is located within the Muping–Rushan gold metallogenic belt, eastern Jiaodong Peninsula, so as to illustrate the genesis of gold mineralization and its implication for exploration. Four molybdenite samples yield a well-defined Re–Os isochron age of 118.4 ± 2.5 Ma (2σ), which is identical to the weighted average Re–Os model age of 118 ± 1.7 Ma (2σ). Integration of the new geochronologic data with those reported recently from the other gold mines in the Muping–Rushan gold metallogenic belt suggests that a discrete gold event occurred in Xiawolong ca. 4 m.y. older than that for the other gold mineralization at ca. 114 Ma in eastern Jiaodong. In addition, two fine-grained granite samples, measured using the LA-ICP-MS zircon U–Pb method, produce the first precise ages of 118 ± 2 to 117 ± 2 Ma (2σ), identical to the molybdenite Re–Os ages, within the margin of error and obtained in this study. The fine-grained granite has a similar lithology and emplacement age as those of the medium-grained monzogranite consisting of the marginal facies of the Sanfoshan batholith, and is considered to be the crystallization products of Sanfoshan granitic magma in the late stage. Combined with the previous S-Pb-D-O isotope, fluid inclusion and geological studies, which suggest that the ore-forming fluid of Xiawolong gold mineralization is from magmatic water, and the identification that the magnetite coexists with the gold-bearing pyrite and molybdenite in the gold ores, which indicates a high oxygen fugacity (fO₂) of both the magma and resultant hydrothermal fluids, it is logical to infer that the Xiawolong gold deposit is genetically in relation to the Sanfoshan granitic magmatism, which is high in fO₂ and rich in Au at the magmatic–hydrothermal transition stage, and the change in fO₂ mostly likely makes a significant contribution to the precipitation of Au. This result reveals that the late-stage granitic magma with high fO₂, which is crystallized into the fine-grained granite, probably is also rich in Au, except the W–Mo–Cu–Zn–U–Be–Li–Nb–Ta–Sn–Bi-elements. Therefore, based on the extensional tectonic regime for the early Cretaceous Jiaodong gold deposits, we propose that gold exploration in the Jiaodong should not only focus on the fault-hosted Au but also on the fine-grained granite-hosted Au around the apical portions of the late Early Cretaceous small-granitic intrusions with high fO₂. This model could also be important for prospecting in other gold ore districts, which have a similar tectonic setting. Full article

Timing and/or position-sensitive MCP detectors, which detect secondary electrons (SEs) emitted from a conversion foil during ion passage, are widely utilized in nuclear physics and nuclear astrophysics experiments. This review covers high-performance timing and/or position-sensitive MCP detectors that use SE emission for mass measurements of exotic nuclei at nuclear physics facilities, along with their applications in new measurement schemes. The design, principles, performance, and applications of these detectors with different arrangements of electromagnetic fields are summarized. To achieve high precision and accuracy in mass measurements of exotic nuclei using time-of-flight (TOF) and/or position (imaging) measurement methods, such as high-resolution beam-line magnetic-rigidity time-of-flight (B$\rho$-TOF) and in-ring isochronous mass spectrometry (IMS), foil-MCP detectors with high position and timing resolution have been introduced and simulated. Beyond TOF mass measurements, these new detector systems are also described for use in heavy ion beam trajectory monitoring and momentum measurements for both beam-line and in-ring applications. Additionally, the use of position-sensitive timing foil-MCP detectors for Penning trap mass spectrometers and multi-reflection time-of-flight (MR-TOF) mass spectrometers is proposed and discussed to improve efficiency and enhance precision. Full article

Catheter ablation for ventricular tachycardia (VT) in patients with systolic heart failure remains a critical yet challenging area of non-pharmacological therapy. Despite positive outcomes in atrial fibrillation, evidence for the efficacy of VT ablation in reducing cardiac mortality is inconclusive due to the absence of standardized ablation strategies. The primary challenges include difficulties in identifying suitable ablation targets and their deep locations within myocardial tissue. Current techniques, such as voltage mapping, provide valuable insights; however, they are limited by the presence of numerous bystander areas and the occurrence of incomplete transmural scarring. Recent advancements in functional substrate mapping have focused on identifying critical isthmuses without requiring hemodynamic stabilization during VT, thereby shifting the emphasis to the analysis of potentials during baseline rhythm. While methods like isochronal late activation mapping have improved target identification, they primarily address conduction abnormalities without adequately considering repolarization heterogeneity. This review highlights emerging technologies that utilize unipolar potentials to assess repolarization heterogeneities and identify VT isthmuses. Furthermore, novel ablation sources such as pulsed-field ablation, bipolar ablation, and ultra-low temperature cryoablation are being explored to create deeper and more durable lesions, addressing the limitations of traditional radiofrequency ablation. These advancements aim to reduce VT recurrence and improve overall treatment efficacy. Ultimately, understanding these innovative strategies is expected to optimize procedural outcomes and significantly enhance the management of patients with scar-related VT. Full article

Despite the great success in the global exploration and development of reef reservoirs, research on bioclastic shoals under reefs is still in its infancy. Bioclastic shoal reservoirs are very thin, with multiple vertical levels and fast lateral changes, which makes accurate prediction of the reservoir’s location much tougher. To further implement the reservoir distribution, under the guidance of sequence stratigraphy, the prediction of thin shoals under the control of an isochronous stratigraphic framework was established. Using the combination of spectrum shaping and F-X domain noise suppression techniques and utilizing the signal-to-noise ratio spectrum set as the reference, logging curve as supervision, and well seismic calibration and isochronal amplitude slicing as quality control, the seismic frequency band was extended, and the seismic data resolution and signal-to-noise ratio were improved. After frequency extension, the global optimal seismic automatic interpretation technique was used to construct an isochronal stratigraphic framework model. Through waveform facies-controlled inversion and waveform facies-controlled simulation techniques, the elastic properties of the shoal reservoir were obtained, from which the planar distribution of the reservoir was accurately predicted. The above methods were applied to the prediction of the bioclastic shoal reservoir in the lower submember of the Changxing formation in the Yuanba gas field (China). The plane distribution of bioclastic shoal in the first and second levels was identified, which provides a guideline for the prediction of thin shoal reservoirs. Full article

Traditional seismic wave-based tunnel advanced geological forecasting techniques are primarily designed for drill and blast method construction tunnels. However, given the fast excavation speed and limited prediction space in tunnel boring machine (TBM) construction tunnels, traditional methods have significant technical limitations. This study analyzes the characteristics of different types of TBM construction tunnels and, considering the practical construction conditions, identifies an effective observation system and data acquisition method. To address the challenges in advanced forecasting for TBM construction tunnels, a method of ellipsoid positioning velocity analysis, which takes into account the constraints of three-component data directions, is proposed. Based on the characteristics of the advanced forecasting observation system, this method compares the maximum values on the spatial isochronous ellipsoidal surface to determine the average velocity of the geological layer rays, thereby enabling accurate inversion of the spatial distribution ahead. Utilizing numerical simulation, a model for the advanced detection of typical unfavorable geological formations is established by obtaining the wave field response characteristics of seismic waves in three-dimensional space, and the velocity structure of the model is retrieved through this velocity analysis method. In the engineering example, the fracture property, water content, and weathering degree of the surrounding rock are predicted accurately. Full article

Objective: There is a demand to make hospital management information beyond basic key performance indicators (KPIs) accessible for clinicians. Methods: We developed an interactive application (IAPP) in R Shiny to visualize such information. We provided the IAPP source code online. As a use case, we recorded basic KPIs (numbers of patients (NPs), reimbursed valuation ratios (RVRs), mean length of stay (LOS)), main diagnoses (MDGNs), main procedures (MPRCs), and catchment area (CA) by district from April 2022 to March 2024 at the index department in central Germany, where a neurotrauma and spinal surgery service was resumed on 1 April 2022. Case mix indexes (CMIs) were calculated. We retrieved information about online-reported patient satisfaction (ORPS) from an online physician rating platform between January 2022 and March 2024. Information on longitudes and latitudes of the index department and neighbouring hospitals was collected. We calculated car travelling isochrones (CTIs) of the hospitals as a proxy variable for accessibility. Chi-square and Fisher’s exact served as statistical tests. Results: During the observation period, the monthly NPs increased from 26 to 43, the RVR showed a 3.96-fold increase, the CMI showed a 2.41-fold increase, and the LOS reached a steady state in the 2nd year after service resumption. CA (p = 0.03), MDGNs, and MPRCs diversified. ORPS trended towards better overall evaluation after service resumption (p = 0.09). CTI mapping identified a unique market position of the index department. Conclusions: The IAPP makes extended hospital management data accessible to clinicians, can inform other stakeholders in healthcare, and can be tailored to local conditions. Full article

Analysing the spatial distribution patterns of the urban tourism and leisure industry is crucial for meeting the dual demands of residents and visitors for a better quality of life. Most existing studies on spatial distribution characteristics and the accessibility of leisure tourism have been carried out individually and lack the relationship between the tourism and leisure industry and accessibility. Based on Qingdao’s POI data, spatial visualisation methods and Geodetector are used to explore spatial distribution, accessibility, and influencing factors. (1) It is found that the overall and various types of the tourism and leisure industry in Qingdao exhibit clustered distribution, with an imbalance between coastal and inland areas. (2) There are notable spatial disparities in overall accessibility within Qingdao, with most regions falling within the 70-min isochrone. The spatial distribution of accessibility at the county level aligns with the overall accessibility patterns. (3) Various factors influence the spatial distribution of the tourism and leisure industry. Per capita disposable income is the primary factor affecting the spatial layout of Qingdao’s tourism and leisure industry. After interacting with other factors, GDP per capita and tourist trips become key influencing factors. These findings can promote the sustainable development of urban tourism in Qingdao and provide a valuable reference for other cities. Full article

In recent years, the Chang 7 member of the Mesozoic Triassic Yanchang Formation in the Ordos Basin has emerged as a significant repository of abundant and distinctive unconventional oil resources. The Heshui area boasts substantial shale oil reserves, with reported third-level reserves surpassing 600 million tons. However, the region in the southern part of Heshui is marked by pronounced variability in reservoir quality, intricate oil–water dynamics, low formation energy, and suboptimal fluid properties, leading to divergent development outcomes for horizontal wells. There is an imperative need to devise and refine new geological models to underpin the efficient exploitation of shale oil in the southern Heshui area. This study focuses on the shale oil reservoir of the Chang 7 member in the southern Heshui area of the Ordos Basin, conducting detailed stratigraphic correlation and establishing a refined isochronous stratigraphic framework. Utilizing Petrel^TM modeling software (version 2018), we integrate deterministic and stochastic modeling approaches, adhering to the principles of isochronous and phased modeling. By assessing the thickness of sand and mudstone layers and the overall stratigraphic sequence, we derive a geological probability surface. Subsequently, this surface is harnessed to constrain the lithofacies, yielding a constrained lithofacies model. Employing sequential indicator simulation and sequential Gaussian stochastic simulation, we develop a reservoir attribute model that is anchored in the lithofacies model and its controls, culminating in a robust and dependable static model. Employing the geological probability surface constraint method, we meticulously construct the reservoir matrix model, amalgamating individual well data with the inherent certainty and randomness of reservoir plane thickness. This approach further enhances the model’s accuracy and mitigates the uncertainty and randomness associated with inter-well interpolation to a significant degree. Full article

W-(0, 0.1, 0.3, 0.5) wt.% Hf (mass fraction, wt.%) materials were fabricated by the powder metallurgy method and hot rolling. The microstructure, mechanical properties, and high-temperature stability of alloys with varying compositions were systematically studied. The active element Hf can react with the impurity O segregated at the grain boundary to form fine dispersed HfO₂ particles, refining the grains and purifies and strengthening the grain boundary. The average size of the sub-grains in the W-0.3 wt.% Hf alloy is 4.32 μm, and the number density of the in situ-formed second phase is 6.4 × 10¹⁷ m⁻³. The W-0.3 wt.% Hf alloy has excellent mechanical properties in all compositions of alloys. The ultimate tensile strength (UTS) is 1048 ± 17.02 MPa at 100 °C, the ductile fracture occurs at 150 °C, and the total elongation (TE) is 5.91 ± 0.41%. The UTS of the tensile test at 500 °C is 614 ± 7.55 MPa, and the elongation is as high as 43.77 ± 1.54%. However, more Hf addition will increase the size of the second-phase particles and reduce the number density of the second-phase particles, resulting in a decrease in the mechanical properties of the tungsten alloy. The isochronal annealing test shows that the recrystallization temperature of W-Hf alloy is 1400 °C, which is 200 °C higher than rolling pure tungsten. Full article