Search Results (280)

Waterborne polyurethane (WPU) and waterborne poly(urethane-urea) (WPUU) dispersions allow safer and more sustainable manufacturing of rechargeable batteries via water-based processing, while offering tunable adhesion and segmented-domain mechanics. Beyond conventional roles as binders and coatings, WPU/WPUU chemistries also support separator/interlayer and polymer-electrolyte designs for lithium-ion and lithium metal systems, where interfacial integrity, stress accommodation, and ion transport must be balanced. Here, we review WPU/WPUU fundamentals (building blocks, dispersion stabilization, morphology, and film formation) and review prior studies through a battery-centric structure–processing–property lens. We point out key performance-limiting trade-offs—adhesion versus electrolyte uptake and ionic conductivity versus storage modulus—and relate them to practical formulation variables, including soft-/hard-segment selection, ionic center/counterion design, molecular weight/topology control, and crosslinking strategies. Applications are reviewed for (i) electrode binders (graphite/Si; cathodes such as LFP and NMC), (ii) separator coatings and functional interlayers, and (iii) gel/solid polymer electrolytes and hybrid composites, with a focus on practical design guidelines for navigating these trade-offs. Future advancements in WPU/WPUU chemistries will depend on developing stable, low-impedance interlayers, enhancing electrochemical behavior, and establishing application-specific design guidelines to optimize performance in lithium metal batteries (LMB). Full article

The discovery of cathode materials that simultaneously exhibit high oxygen-reduction activity, robust stability, and low cost is pivotal to moving solid oxide fuel cells (SOFCs) from the laboratory into commercial deployment. To address this challenge, we compile the largest perovskite dataset to date parameterized by the oxygen tracer surface exchange coefficient (k^*). Using only readily obtainable elemental and structural descriptors, we develop machine-learning models that surpass existing approaches in both accuracy and computational efficiency. Specifically, by integrating Mahalanobis-distance-based applicability-domain analysis with random forest-enhanced property descriptors and support vector regression, we high-throughput-screen 1.3 million ABO3 compositions and curate a candidate list that balances thermodynamic stability, cost, and oxygen-reduction activity. Beyond prediction accuracy, SHAP interpretation reveals strong physical correlations between the enhanced descriptors and k^*, highlighting the coefficient of thermal expansion, O p-band center, and A-site ionic radius as the dominant factors governing oxygen exchange kinetics. Finally, we identify 209 promising perovskite cathodes predicted to outperform LSC in the low-temperature regime, offering promising directions for experimental realization of practical low-temperature SOFCs. Full article

The article presents the preparation method of a green composite material composed of cellulose and lignin using an ionic liquid as a solvent. In the process, cellulose and lignin are dissolved in the ionic liquid and subsequently regenerated into a composite film via coagulation in ethanol/water bath. The research focused on evaluating the mechanical properties of the resulting composite, which exhibited a high tensile strength exceeding 100 MPa, demonstrating its robustness and potential for various applications. Importantly, the simultaneous integration of lignin enabled a favorable balance between high mechanical strength and enhanced biodegradability, addressing a common trade-off in sustainable materials. Additionally, the biodegradation behavior of the composite in soil was investigated, showing that it gradually decomposes, making it environmentally friendly. Toxicity tests on soil bacteria indicated that the composite does not adversely affect microbial activity, supporting its suitability for ecological use. Furthermore, the gas permeability and water vapor transmission of the composite film was assessed, providing insight into its barrier properties. Overall, the study highlights the potential of cellulose-lignin composites produced via ionic liquids as sustainable and biodegradable materials with promising mechanical and environmental properties. Full article

Berberine (BBR), a protoberberine alkaloid with a long history of medicinal use, has consistently demonstrated benefits in glucose–lipid metabolism and inflammatory balance across both preclinical and human studies. These diverse effects are not mediated by a single molecular target but by BBR’s capacity to restore network coordination among metabolic, immune, and microbial systems. At the core of this regulation is an AMP-activated Protein Kinase (AMPK)-centered mechanistic hub, integrating signals from insulin and nutrient sensing, Sirtuin 1/3 (SIRT1/3)-mediated mitochondrial adaptation, and inflammatory pathways such as nuclear Factor Kappa-light-chain-enhancer of Activated B cells (NF-κB) and NOD-, LRR- and Pyrin Domain-containing Protein 3 (NLRP3). This hub is dynamically regulated by system-level inputs from the gut, mitochondria, and epigenome, which in turn strengthen intestinal barrier function, reshape microbial and bile-acid metabolites, improve redox balance, and potentially reverse the epigenetic imprint of metabolic stress. These interactions propagate through multi-organ axes, linking the gut, liver, adipose, and vascular systems, thus aligning local metabolic adjustments with systemic homeostasis. Within this framework, BBR functions as a negentropic modulator, reducing metabolic entropy by fostering a coordinated balance among these interconnected systems, thereby restoring physiological order. Combination strategies, such as pairing BBR with metformin, Sodium-Glucose Cotransporter 2 (SGLT2) inhibitors, and agents targeting the microbiome or inflammation, have shown enhanced efficacy and substantial translational potential. Berberine ursodeoxycholate (HTD1801), an ionic-salt derivative of BBR currently in Phase III trials and directly compared with dapagliflozin, exemplifies the therapeutic promise of such approaches. Within the hub–axis paradigm, BBR emerges as a systems-level modulator that recouples energy, immune, and microbial circuits to drive multi-organ remodeling. Full article

Cerebrospinal fluid (CSF) is a key biological matrix that reflects the physiological and pathological states of the central nervous system (CNS). It supports brain function by regulating ionic balance, facilitating molecular transport, and clearing metabolic waste. In this article, we present a standardized protocol for CSF collection along with an integrative multiplatform metabolomic workflow that combines proton nuclear magnetic resonance spectroscopy (¹H-NMRS) and high-performance liquid chromatography coupled to mass spectrometry (HPLC-MS). Integrating these complementary analytical modalities enhances metabolite coverage and improves analytical robustness, enabling a more comprehensive and reliable characterization of the CSF metabolome. This workflow supports the discovery of potential biomarkers and advances our understanding of neurochemical alterations within the CNS. Full article

Polyampholytes combine cationic and anionic groups in one macromolecular platform and are emerging as versatile components for energy storage and conversion. This review synthesizes how their charge balance, hydration, and architecture can be engineered to address ionic transport, interfacial stability, and safety across batteries, supercapacitors, solar cells, and fuel cells. We classify annealed, quenched, and zwitterionic systems, outline molecular design strategies that tune charge ratio, distribution, and crosslinking, and compare device roles as gel or solid electrolytes, eutectogels, ionogels, binders, separator coatings, and interlayers. Comparative tables summarize ionic conductivity, cation transference number, electrochemical window, mechanical robustness, and temperature tolerance. Across Li and Zn batteries, polyampholytes promote ion dissociation, homogenize interfacial fields, suppress dendrites, and stabilize interphases. In supercapacitors, antifreeze hydrogels and poly(ionic liquid) networks maintain conductivity and elasticity under strain and at subzero temperature. In solar cells, zwitterionic interlayers improve work function alignment and charge extraction, while ordered networks in fuel cell membranes enable selective ion transport with reduced crossover. Design rules emerge that couple charge neutrality with controlled hydration and dynamic crosslinking to balance conductivity and mechanics. Key gaps include brittleness, ion pairing with multivalent salts, and scale-up. Opportunities include soft segment copolymerization, ionic liquid and DES plasticization, side-chain engineering, and operando studies to guide translation. Full article

Nano-biochar (n-BC) is an emerging eco-friendly material with potential to improve crop performance under salt stress. This study aimed to evaluate the effects of foliar applications of bamboo-derived n-BC on the morphological and biochemical responses of lettuce plants under salt stress (40 mM NaCl). n-BC solutions (1.0, 3.0, and 5.0% w/v) were foliar-applied every five days until harvest. Salt stress markedly increased hydrogen peroxide (H₂O₂) and malondialdehyde (MDA) by 264.54% and 14.02%, disrupted Na⁺/K⁺ homeostasis, and reduced biomass. Foliar n-BC mitigated these effects by reducing Na⁺ accumulation by 22.24–25.11% and enhancing K⁺, Ca²⁺, and Mg²⁺ uptake. The treatments also improved photosynthetic pigments and increased proline, soluble proteins, and soluble sugars. Oxidative damage was alleviated, as reflected by reductions in H₂O₂ and MDA together with enhanced ascorbate peroxidase, catalase, and superoxide dismutase activities. Total phenolics, flavonoids, and ABTS and DPPH scavenging activities also increased under n-BC application. Among all the concentrations, 3.0% (w/v) n-BC consistently produced the greatest improvements in growth, ionic balance, and antioxidant responses. These findings demonstrate that bamboo-derived n-BC is a promising foliar biostimulant for enhancing lettuce performance under saline conditions. Full article

Chemical and plant-based strategies have become increasingly critical for the remediation of saline–alkali soils. However, the underlying mechanisms driving improvements in soil quality and ecological functionality remain insufficiently understood. In this study, we adopted a synergistic remediation approach that integrated multiple switchgrass (Panicum virgatum L.) cultivars with a coal-based soil amendment to enhance saline–alkali land. A field experiment was conducted using five switchgrass varieties (YM-1, YM-2, YM-3, YM-4, and YM-5), each receiving a uniform application of the coal-based soil conditioner at 10 t ha⁻¹. A traditional control group was not included in this study, as the experimental design focused on direct comparisons between varieties. Our results showed that soil ionic composition played a significant role in shaping microbial activity. Notably, we found that YM-5 treatment exhibited the highest relative soil microbial abundance (22.1%) under the condition of soil amendments. Furthermore, the YM-5 treatment significantly reduced soil Na+ content and exchangeable sodium percentage (ESP) (p < 0.05), outperforming other treatments. Compared to YM-2, the YM-5 treatment also resulted in substantial increases in soil organic carbon (SOC) and available potassium (AK), increases of 78.28% and 54.3%, respectively. In addition to enhancing physicochemical parameters, the integration of switchgrass and amendment promoted soil biological vitality. For example, the YM-2 treatment achieved a 7.4% increase in catalase (CAT) activity and a 6.3% reduction in soil pH compared to YM-3, indicating improved redox balance and acid–base regulation. Collectively, these findings provide direct empirical evidence supporting the effectiveness of switchgrass–amendment combinations in saline–alkali soil restoration. Among the tested cultivars, YM-5 demonstrated superior ecological performance and is recommended as the most suitable genotype for saline–alkali soil amelioration when used in conjunction with coal-based amendments. Full article

Bioactive glasses remain promising candidates for enhancing osseointegration on metallic implants. However, achieving a composition that combines controlled dissolution, cytocompatibility, and antimicrobial functionality remains an ongoing challenge. Building upon the prior structural and thermal characterization of boron-substituted 6P55 phosphosilicate glasses, this study investigates the biological consequences of incorporating 0, 5, 10, and 15 mol% B₂O₃ to determine their suitability as coatings for Ti6Al4V. Glass extracts were evaluated using L-929 fibroblast cultures (MTT assay and ImageJ-based cell counting), antimicrobial assays against Escherichia coli and Staphylococcus aureus using a semi-quantitative dilution-plating method, and SBF immersion studies to assess pH evolution, surface mineralization, and Ca/P ratio development. FTIR and SEM analyses revealed composition-dependent formation of phosphate-, carbonate-, and silicate-rich surface layers, with 5B exhibiting the most consistent early-stage hydroxyapatite-like signatures, supported by Ca/P ratios approaching the stoichiometric value. The pH measurements showed rapid alkalization for 5B and moderate buffering behavior at higher boron contents, consistent with boron-dependent modifications to network connectivity. Cytocompatibility studies demonstrated a dose- and time-dependent reduction in cell number at elevated B₂O₃ levels, whereas the 0B and 5B extracts maintained higher viability and preserved cell morphology. Antibacterial assays revealed strain-dependent and sub-lethal inhibitory effects, with E. coli exhibiting stronger sensitivity than S. aureus, likely due to differences in cell wall architecture and susceptibility to ionic osmotic microenvironment changes. When considered alongside previously published computational and physicochemical results, the biological data indicate that moderate boron incorporation (5 mol%) provides the most favorable balance between dissolution kinetics, apatite formation, cytocompatibility, and antimicrobial modulation. These findings identify the 5B composition as a strong candidate for further optimization toward bioactive glass coatings on Ti6Al4V implants. Full article

In this work, a flexible, stretchable, tough, highly ionic conductive, and anti-freezing hydrogel based on acrylamide/two-dimensional transition metal carbide (MXene)/montmorillonite (MMT) was precisely designed. In the hydrogel, MXene and MMT acted as both cross-linking agents and conductive fillers, delivering high stretchability (1037%) with a strength of up to approximately 67 kPa and high conductivity. As a result, the usual trade-off between conductivity and mechanical properties of hydrogels could be alleviated to some extent. Therefore, the hydrogel could be used as an electrolyte for supercapacitors (SCs) and strain sensors to monitor physical signals. The hydrogel-based SC exhibited outstanding electrochemical performance over a wide temperature range. Moreover, it could easily withstand various deformations, such as bending, twisting, and compression. The hydrogel also exhibited excellent sensing properties, with a short tensile response time and a high-sensitivity factor (GF = 14.8) in the 0–400% range (0 denotes the original state, where both the strain and stretch are zero as there is no deformation at this point). Due to its high conductivity, the prepared hydrogel could be used as a flexible electrode to replace commercial electrodes and record electromyographic (EMG) signals. This work proposes a novel approach for balancing the conductivity and mechanical strength of hydrogels. Full article

The papermaking and recycling industries face increasing demands to improve efficiency, product quality, and environmental performance under conditions of water closure and high furnish variability. This study presents a comprehensive assessment of process control and management strategies for optimizing fines behavior, retention and fixation efficiency, de-inking performance, and ash balance in modern papermaking systems. The surface chemistry of fines was found to play a pivotal role in regulating charge distribution, additive demand, and drainage behavior, acting both as carriers and sinks for dissolved and colloidal substances. Results show that light, targeted refining enhances external fibrillation and produces beneficial fines that strengthen fiber bonding, while excessive refining generates detrimental fines and impairs drainage. Sequential retention programs involving polyamines, polyaluminum compounds, and microparticle systems significantly improve fines capture and drainage stability when operated under controlled pH and ionic strength. In recycling operations, optimized flotation conditions coupled with detackifiers and mineral additives such as talc effectively reduce micro-stickies formation and deposition risks. Ash management strategies based on partial purge and coordinated filler make-up maintain bonding, optical properties, and energy efficiency. Overall, the findings emphasize the need for an integrated wet-end management framework combining chemical, mechanical, and operational controls. Perspectives for future development include the application of biodegradable additives, nanocellulose-based reinforcements, and data-driven optimization tools to achieve sustainable, high-performance paper manufacturing. Full article

Lead halide perovskites, exemplified by methylammonium (MA) lead iodide (MAPbI₃), combine strong optical absorption, long carrier diffusion lengths, and defect-tolerant electronic structure with facile processing, making them attractive for photovoltaics and radiation detection. Yet, their behavior under electron irradiation remains insufficiently understood, limiting deployment in space and dosimetry contexts. Here, we employ Monte Carlo simulations (Geant4) to model electron interactions with MAPbI₃ across energies from 0.1 to 100 MeV and absorber thicknesses from 10 μm to 1 cm. We quantify deposited energy, event statistics, energy per interaction, non-ionizing energy loss, and dominant radiation effects. The results reveal strong thickness-dependent regimes: thin photovoltaic-type layers (~hundreds of nanometers) are largely transparent to MeV electrons, minimizing bulk damage but allowing localized ionization, exciton self-trapping, and photoexcitation-driven ion migration. Although localized excitations can temporarily improve carrier collection under short-term exposure, their cumulative effect drives ionic rearrangement and defect growth, ultimately reducing device stability. In contrast, thicker detector-type films (10–100 μm) sustain multiple scattering and ionization cascades, enhancing sensitivity but accelerating defect accumulation. At centimeter scales, energy deposition saturates, enabling bulk-like absorption for high-flux dosimetry. Overall, electron irradiation in MAPbI₃ is dominated by electronic excitation rather than ballistic displacements, underscoring the need to optimize thickness and composition to balance efficiency, sensitivity, and durability. Full article

Binder jet 3D printing of calcium sulfate-based materials combined with phase transformation offers a versatile route for fabricating customized bone grafts; however, controlling the transformation process remains a key challenge. This study investigates the effect of post-printing hydration in sodium chloride (NaCl) solutions on the phase transformation, dimension, and compressive properties of binder jet-printed calcium sulfate (3DPCaS) toward hydroxyapatite (3DPHA) formation. The as-printed 3DPCaS primarily consisted of bassanite with minor gypsum, which progressively transformed into gypsum upon immersion in NaCl solutions of varying concentrations (1–5 M) and durations (2–30 min). Increased immersion time and moderate NaCl concentrations (2–4 M) promoted gypsum formation without inducing dimensional instability. Subsequent transformation in phosphate solution produced 3DPHA with high hydroxyapatite (HA) purity, reaching 100% conversion. Microstructural analysis revealed recrystallized, plate-like gypsum crystals that served as favorable templates for HA nucleation. The resulting 3DPHA exhibited enhanced specific modulus (up to 274.9 MPa.m³/kg) and specific strength (up to 7.5 MPa.m³/kg). The optimal condition, immersion in 4 M NaCl solution for 30 min, achieved a balance between complete HA transformation, mechanical enhancement, and dimensional stability. Controlled ionic hydration thus represents a simple, low-cost, and effective strategy for improving properties of 3DPHA bone grafts. Full article

Conventional polyurethane (PU) synthesis is associated with environmental and health concerns due to the use of toxic isocyanates. In recent years, the development of non-isocyanate polyurethanes (NIPUs) has emerged as a sustainable alternative to conventional polyurethanes. However, these materials still exhibit inconsistencies in their physicomechanical and biological properties. This systematic review was conducted following the PRISMA methodology. A total of sixteen studies published between 2015 and 2025 were analyzed, focusing on functionalization techniques developed for non-isocyanate polyurethanes to evaluate their influence on physicomechanical and biological performance. The results reveal that functionalization can be achieved through the incorporation of inorganic additives, polar or ionic groups, and polymeric modifiers. Among the analyzed systems, those functionalized with azetidinium and Polyethylene glycol diacrylate (PEGDA) exhibited the most balanced performance, combining high mechanical strength, low cytotoxicity, and effective antibacterial activity. Overall, these functionalizations have demonstrated significant improvements in tensile strength, thermal stability, hydrophilicity, and antimicrobial activity, facilitating broader industrial and biomedical applications. Consequently, this review concludes that functionalization plays a pivotal role in improving the overall performance of non-isocyanate polyurethanes. It represents an effective and sustainable strategy to enhance the physicomechanical and biological behavior of these materials, supporting their development for advanced applications such as bioactive coatings, membranes, and wound dressings. Full article

In this study, the structural changes and reconstruction mechanism of sesame protein-derived amyloid fibrils under varied digestive parameters (pepsin concentration, digestive pH and ionic strength) during gastric digestion were investigated, and the effect of fibril reconstruction on the gastric digestion stability of β-carotene nanoparticles was also explored. The results demonstrated that amyloid fibrils underwent a three-stage dynamic process of enzymatic hydrolysis, regeneration and degradation during gastric digestion. The pepsin concentration of 2 mg/mL was found to promote the balance between fibril hydrolysis and regeneration. The fibrils displayed a pronounced regenerative capacity at pH values of 1.5 and 2.5, whereas at pH 3.5, which was proximal to the isoelectric point of protein, aggregation and precipitation were observed. Furthermore, it was found that 10 mM NaCl exerted minimal influence on fibril stability, whereas the higher concentrations of salt ions were shown to obstruct regeneration and promote aggregation. Analyses through SDS-PAGE, GPC, and MALDI-TOF-MS revealed a gradual reduction in the molecular weight of the fibrils during gastric digestion, with certain fragments reaggregating to form new fibril structures. The fibril-based delivery system formed a stable protective structure for β-carotene nanoparticles, which not only prevented their aggregation but also facilitated their release in the small intestine. Full article