Search Results (33)

It is difficult to simultaneously achieve surface-enhanced Raman scattering (SERS) and surface-enhanced fluorescence (SEF) for noble metals. Herein, a composite substrate is demonstrated based on the rational construction of Ag nanoparticles (Ag NPs) and inverse opal polydimethylsiloxane (PDMS) for surface Raman fluorescence dual enhancement. The well-designed Ag nanoparticle (Ag NP)-decorated inverse opal PDMS (AIOP) composite substrate is fabricated using the polystyrene (PS) photonic crystal method and the sensitization reduction technique. The inverse opal PDMS enhances the electromagnetic (EM) field by increasing the loading of Ag NPs and plasmonic coupling of Ag NPs, leading to SERS activity. The thin shell layer of polyvinyl pyrrolidone (PVP) in core–shell Ag NPs isolates the detected molecule from the Ag core to prevent the fluorescence resonance energy transfer and charge transfer to eliminate fluorescence quenching and enable SEF performance. Based on the blockage of the core–shell structure and the enhanced EM field originating from the inverse opal structure, the as-fabricated AIOP composite substrate shows dual enhancement in surface Raman fluorescence. The AIOP composite substrate in this work, which combines improved SERS activity and SEF performance, not only promotes the development of surface-enhanced spectroscopy but also shows promise for applications in flexible sensors. Full article

Inverse opal (IO) structures based on photonic colloidal crystal (PCC) templates are types of materials that possess unique optical properties due to their ordered arrays. These materials have the ability to manipulate the propagation of light, producing unique reflection spectra and structural colours. Due to these properties, IOs have been used as optical sensors for various applications such as the detection of physical, chemical, and biological entities. This review begins with a brief introduction of PCCs, IOs and their preparation procedures. The recent advancements in the applications of IOs for sensing temperature, pH, humidity, chemical compounds (such as organic solvents and heavy metal ions), and biological entities (such as tumour cells, viruses and bacteria) are then discussed in detail. The review also explores strategies and techniques aimed at enhancing the sensitivity and lowering the limit of detection of IO-based sensors. Finally, it addresses the current challenges, existing limitations, and prospective future directions in the development and deployment of IO-based sensors. Full article

Inverse opals (IOs) are intensively researched in the field of photocatalysis, since their optical properties can be fine-tuned by the initial nanosphere size and material. Another possible route for photonic crystal programming is to stack IOs with different pore sizes. Accordingly, single and double IOs were synthesized using vertical deposition and atomic layer deposition. In the case of the double IOs, the alternating use of the two preparation methods was successfully performed. Hydrothermally synthesized 326 and 458 nm carbon nanospheres were utilized to manufacture two different IOs; hence the name 326 nm and 458 nm IOs. Heat treatment removed the sacrificial template carbon nanospheres, and the as-deposited TiO₂ crystallized upon annealing into nanocrystalline anatase form. Reflectance mode UV–visible spectroscopy showed that most IOs had photonic properties, i.e., a photonic band gap, and by the “slow” photon effect enhanced absorbance, except the 326 nm IO, even though it also had an increase in absorbance. The IOs were tested by photocatalytic degradation of Rhodamine 6-G under visible light. Photocatalytic experiments showed that the 458 nm IO was more active and the double IOs showed higher efficiency compared to monolayers, even if the less effective 326 nm IO was the top layer. Full article

The rational design of photonic crystal photocatalysts has attracted significant interest in order to improve their light harvesting and photocatalytic performances. In this work, an advanced approach to enhance slow light propagation and visible light photocatalysis is demonstrated for the first time by integrating a planar defect into CoO_x-TiO₂ inverse opals. Trilayer photonic crystal films were fabricated through the successive deposition of an inverse opal TiO₂ underlayer, a thin titania interlayer, and a photonic top layer, whose visible light activation was implemented through surface modification with CoO_x nanoscale complexes. Optical measurements showed the formation of “donor”-like localized states within the photonic band gap, which reduced the Bragg reflection and expanded the slow photon spectral range. The optimization of CoO_x loading and photonic band gap tuning resulted in a markedly improved photocatalytic performance for salicylic acid degradation and photocurrent generation compared to the additive effects of the constituent monolayers, indicative of light localization in the defect layer. The electrochemical impedance results showed reduced recombination kinetics, corroborating that the introduction of an optical defect into inverse opal photocatalysts provides a versatile and effective strategy for boosting the photonic amplification effects in visible light photocatalysis by evading the constraints imposed by narrow slow photon spectral regions. Full article

We demonstrate the band gap programming of inverse opals by fabrication of different wall thickness by atomic layer deposition (ALD). The opal templates were synthesized using polystyrene and carbon nanospheres by the vertical deposition method. The structure and properties of the TiO₂ inverse opal samples were investigated using Scanning Electron Microscope (SEM) and Focused Ion Beam Scanning Electron Microscopy (FIB-SEM), Energy Dispersive X-ray analysis (EDX), X-ray Diffraction (XRD) and Finite Difference Time Domain (FDTD) simulations. The photonic properties can be well detected by UV-Vis reflectance spectroscopy, while diffuse reflectance spectroscopy appears to be less sensitive. The samples showed visible light photocatalytic properties using Raman microscopy and UV-Visible spectrophotometry, and a newly developed digital photography-based detection method to track dye degradation. In our work, we stretch the boundaries of a working inverse opal to make it commercially more available while avoiding fully filling and using cheaper, but lower-quality, carbon nanosphere sacrificial templates. Full article

High-quality, 3D-shaped, SiO₂ colloidal photonic crystals (ellipsoids, hyperboloids, and others) were fabricated by self-assembly. They possess a quadratic surface and are wide-angle-independent, direction-dependent, diffractive reflection crystals. Their size varies between 1 and 5 mm and can be achieved as mechanical-resistant, free-standing, thick (hundreds of ordered layers) objects. High-quality, 3D-shaped, polystyrene inverse-opal photonic superstructures (highly similar to diatom frustules) were synthesized by using an inside infiltration method as wide-angle-independent, reflective diffraction objects. They possess multiple reflection bands given by their special architecture (a torus on the top of an ellipsoid) and by their different sized holes (384 nm and 264 nm). Our hanging-drop self-assembly approach uses setups which deform the shape of an ordinary spherical drop; thus, the colloidal self-assembly takes place on a non-axisymmetric liquid/air interface. The deformed drop surface is a kind of topological interface which changes its shape in time, remaining as a quality template for the self-assembly process. Three-dimensional-shaped colloidal photonic crystals might be used as devices for future spectrophotometers, aspheric or freeform diffracting mirrors, or metasurfaces for experiments regarding space-time curvature analogy. Full article

Reversible optical regulation has potential applications in optical anti-counterfeiting, storage, and catalysis. Compared to common power materials, the reverse opal structure has a larger specific surface area and an increased contact area for optical regulation, which is expected to achieve higher regulation rates. However, it is difficult to achieve reversible and repeatable regulation of the luminescent properties of photonic crystals, especially with the current research on the structural collapse of photonic crystals. In this work, WO₃: Yb³⁺, Er³⁺ inverse photonic crystals were prepared by the template approach, and reversible multi-mode optical modification was investigated. Upon heat treatment in a reducing atmosphere or air, the color of the photonic crystals can reversibly change from light yellow to dark green, accompanied by changes in absorption and upconversion of luminescence intensity. The stability and fatigue resistance of this reversible optical modification ability were explored through cyclic experiments, providing potential practical applications for photocatalysis, optical information storage, and electrochromism. Full article

The synergetic effects of electromagnetic and chemical enhancements via the combination of semiconductor nanomaterials with noble metal nanoparticles is crucial to the performance of surface-enhanced Raman scattering (SERS). Here, WO₃/TiO₂ photonic crystal films in the form of three-dimensional inverse opals were fabricated via the co-assembly of polymer colloidal templates with water-soluble precursors in order to simultaneously grow both constituent metal oxides with tailored electronic properties and photonic band gaps. The surface modification of compositionally tuned WO₃/TiO₂ inverse opals by Ag nanoparticles is demonstrated to be an efficient method to boost SERS efficiency in the detection of 4−mercaptobenzoic acid via the synergy of plasmonic effects with charge transfer and slow-light trapping. Full article

Photonic crystals are artificial structures with a spatial periodicity of dielectric permittivity on the wavelength scale. This feature results in a spectral region over which no light can propagate within such a material, known as the photonic band gap (PBG). It leads to a unique interaction between light and matter. A photonic crystal can redirect, concentrate, or even trap incident light. Different materials (dielectrics, semiconductors, metals, polymers, etc.) and 1D, 2D, and 3D architectures (layers, inverse opal, woodpile, etc.) of photonic crystals enable great flexibility in designing the optical response of the material. This opens an extensive range of applications, including photovoltaics. Photonic crystals can be used as anti-reflective and light-trapping surfaces, back reflectors, spectrum splitters, absorption enhancers, radiation coolers, or electron transport layers. This paper presents an overview of the developments and trends in designing photonic structures for different photovoltaic applications. Full article

High-quality convex colloidal photonic crystals can be grown on the tip of an optical fiber by self-assembly using the hanging drop method. They are convex-shaped, produce the diffraction of reflecting light with high efficiency (blazing colors), and have a high curvature. The convex colloidal crystals are easily detachable and, as free-standing objects, they are mechanically robust, allowing their manipulation and use as convex reflective diffraction devices in imaging spectrometers. Currently, the same characteristics are obtained by using gratings-based structures. The optical fiber/colloidal crystal interface is disordered; thus, no light diffraction can be registered. The ordering at this interface was highly increased by forming a polystyrene spacer on the optical fiber tip, which served as a self-assembly substrate for silica colloid, as a mechanical bond between the fiber and the crystal, and as a filler reservoir for an inverse-opal synthesis. The silica opal-like grown on the optical fiber tip can be transformed into a high-quality polystyrene (blazing colors) inverse-opal by using the polystyrene spacer as a filler. We found that the colloidal crystal axisymmetric self-assembles onto the optical fiber tip only if a maximum volume of the colloid drop is settled on a flat end of the polystyrene spacer. Full article

In order to solve the problem of low photocatalytic efficiency in photocatalytic products, researchers proposed a method to use inverse opal photonic crystal structure in photocatalytic materials. This is due to a large specific surface area and a variety of optical properties of the inverse opal photonic crystal, which are great advantages in photocatalytic performance. In this paper, the photocatalytic principle and preparation methods of three-dimensional inverse opal photonic crystals are introduced, including the preparation of basic inverse opal photonic crystals and the photocatalytic modification of inverse opal photonic crystals, and then the application progresses of inverse opal photonic crystal photocatalyst in sewage purification, production of clean energy and waste gas treatment are introduced. Full article

We developed a comparatively simple and inexpensive approach for the determination of the concentration of alcohols in water. The method is based on the study of the optical properties of ethoxylate trimethylolpropane triacrylate (ETPTA) inverse photonic crystals (IPhCs). The position of the transmission minimum associated with the first photonic stop band (PSB) is used as the analytical signal. The PSB position depends on the swelling degree of ETPTA photoresist and the refractive index of the tested alcohols and their mixtures with water. The signal increases linearly with increasing concentration of ethylene glycol and increases nonlinearly but monotonically with the concentration of methanol and ethanol in water. Sensitivity to alcohols, in the case of the ethylene glycol–water mixtures, reached about 0.55 nm/v.% or 560 nm/RIU (refractive index unit), which is sufficient for various applications in bio/chemical detection and environmental monitoring. Full article

Lower light absorption and faster carrier recombination are significant challenges in photocatalysis. This study introduces a novel approach to address these challenges by anchoring cadmium sulfide quantum dots (CdS QDs) on inverse opal (IO)-TiO₂, which increases light absorption and promotes carriers’ separation by coupling slow-photon effect with Z-scheme charge transfer. Specifically, the IO-TiO₂ was created by etching a polystyrene opal template, which resulted in a periodic structure that enhances light absorption by reflecting light in the stop band. The size of CdS quantum dots (QDs) was regulated to achieve appropriate alignment of energy bands between CdS QDs and IO-TiO₂, promoting carrier transfer through alterations in charge transfer modes and resulting in synergistic-amplified photocatalysis. Theoretical simulations and electrochemical investigations demonstrated the coexistence of slow-photon effects and Z-scheme transfer. The system’s photodegradation performance was tested using rhodamine B as a model. This novel hierarchical structure of the Z-scheme heterojunction exhibits degradability 7.82 and 4.34 times greater than pristine CdS QDs and IO-TiO₂, respectively. This study serves as a source of inspiration for enhancing the photocatalytic capabilities of IO-TiO₂ and broadening its scope of potential applications. Full article

In nature, some organisms have the ability to camouflage to adapt to environmental changes; they blend with the environment by changing their skin colors. Such a phenomenon is of great significance for the research of adaptive camouflage materials. In this study, we propose a novel design scheme for the study of angle-independent photonic materials and successfully prepare an electrically tunable multi-color display angle-independent inverse opal photonic gel (IOPG). After photopolymerization of hydroxyethyl methacrylate with ionizable monomer acrylic acid (AA) in a long-range disordered opal template and etching, the angle-independent inverse opal photonic gel is obtained, presenting a single structural color. The electrically responsive color changes can be achieved at different angles. The color of the disordered AA-IOPG changes from green to blue-green when applying +4 V bias voltage and from green to orange when applying −4 V bias voltage. The electrochromism of the disordered AA-IOPG is mainly due to the local pH change caused by water electrolysis under bias voltage, which leads to a change of the swelling ratio. The disordered AA-IOPG shows high color tunability and durability through repeated opposite bias voltage tests, indicating that it is a promising conductive photonic material. Full article

In comparison to conventional nano-infiltration approaches, the atomic layer deposition (ALD) technology exhibits greater potential in the fabrication of inverse opals (IOs) for photocatalysts. In this study, TiO₂ IO and ultra-thin films of Al₂O₃ on IO were successfully deposited using thermal or plasma-assisted ALD and vertical layer deposition from a polystyrene (PS) opal template. SEM/EDX, XRD, Raman, TG/DTG/DTA-MS, PL spectroscopy, and UV Vis spectroscopy were used for the characterization of the nanocomposites. The results showed that the highly ordered opal crystal microstructure had a face-centered cubic (FCC) orientation. The proposed annealing temperature efficiently removed the template, leaving the anatase phase IO, which provided a small contraction in the spheres. In comparison to TiO₂/Al₂O₃ plasma ALD, TiO₂/Al₂O₃ thermal ALD has a better interfacial charge interaction of photoexcited electron–hole pairs in the valence band hole to restrain recombination, resulting in a broad spectrum with a peak in the green region. This was demonstrated by PL. Strong absorption bands were also found in the UV regions, including increased absorption due to slow photons and a narrow optical band gap in the visible region. The results from the photocatalytic activity of the samples show decolorization rates of 35.4%, 24.7%, and 14.8%, for TiO₂, TiO₂/Al₂O₃ thermal, and TiO₂/Al₂O₃ plasma IO ALD samples, respectively. Our results showed that ultra-thin amorphous ALD-grown Al₂O₃ layers have considerable photocatalytic activity. The Al₂O₃ thin film grown by thermal ALD has a more ordered structure compared to the one prepared by plasma ALD, which explains its higher photocatalytic activity. The declined photocatalytic activity of the combined layers was observed due to the reduced electron tunneling effect resulting from the thinness of Al₂O₃. Full article