Search Results (507)

Accurate and non-destructive monitoring of leaf chlorophyll content (LCC) is essential for assessing crop photosynthetic activity and nitrogen status in precision agriculture. This study introduces a phenology-aware machine learning framework that combines hyperspectral reflectance data with various regression models to estimate leaf chlorophyll content (LCC) in cotton at six key reproductive stages. Field experiments utilized synchronized spectral and SPAD measurements, incorporating spectral transformations—such as vegetation indices (VIs), first-order derivatives, and trilateration edge parameters (TEPs, a new set of geometric metrics for red-edge characterization)—for evaluation. Five regression approaches were evaluated, including univariate and multivariate linear models, along with three machine learning algorithms: Random Forest, K-Nearest Neighbor, and Support Vector Regression. Random Forest consistently outperformed the other models, achieving the highest R² (0.85) and the lowest RMSE (4.1) during the bud stage. Notably, the optimal prediction accuracy was achieved with fewer than five spectral features. The proposed framework demonstrates the potential for scalable, stage-specific monitoring of chlorophyll dynamics and offers valuable insights for large-scale crop management applications. Full article

Accurate plant species identification in desert grasslands using hyperspectral data is a critical prerequisite for large-scale, high-precision grassland monitoring and management. However, due to prolonged overgrazing and the inherent ecological vulnerability of the environment, sericite–Artemisia desert grassland has experienced significant ecological degradation. Therefore, in this study, we obtained spectral images of the grassland in April 2022 using a Soc710 VP imaging spectrometer (Surface Optics Corporation, San Diego, CA, USA), which were classified into three levels (low, medium, and high) based on the level of participation of Seriphidium transiliense (Poljakov) Poljakov and Ceratocarpus arenarius L. in the community. The optimal index factor (OIF) was employed to synthesize feature band images, which were subsequently used as input for the DeepLabv3p, PSPNet, and UNet deep learning models in order to assess the influence of species participation on classification accuracy. The results indicated that species participation significantly impacted spectral information extraction and model classification performance. Higher participation enhanced the scattering of reflectivity in the canopy structure of S. transiliense, while the light saturation effect of C. arenarius was induced by its short stature. Band combinations—such as Blue, Red Edge, and NIR (BREN) and Red, Red Edge, and NIR (RREN)—exhibited strong capabilities in capturing structural vegetation information. The identification model performances were optimal, with a high level of S. transiliense participation and with DeepLabv3p, PSPNet, and UNet achieving an overall accuracy (OA) of 97.86%, 96.51%, and 98.20%. Among the tested models, UNet exhibited the highest classification accuracy and robustness with small sample datasets, effectively differentiating between S. transiliense, C. arenarius, and bare ground. However, when C. arenarius was the primary target species, the model’s performance declined as its participation levels increased, exhibiting significant omission errors for S. transiliense, whose producer’s accuracy (PA) decreased by 45.91%. The findings of this study provide effective technical means and theoretical support for the identification of plant species and ecological monitoring in sericite–Artemisia desert grasslands. Full article

Improving the quality of compounds in medicinal and aromatic plants is crucial due to their uses in the pharmaceutical, cosmetics, and food sectors. One way of influencing plant composition is through exposure to different light conditions. Therefore, a two-year field study (2023–2024) was conducted to investigate the impact of coloured shading nets on the physiology, essential oil (EO) content, and composition of three Mentha genotypes: Mentha × piperita ‘Multimentha’, Mentha × piperita ‘Fränkische Blaue’, and Mentha rotundifolia ‘Apfelminze’. In addition to an unshaded control, the Mentha plants were grown under red and blue shading nets. Plant height and vegetation indices were collected weekly. Biomass accumulation, EO content, and composition were determined for each harvest. Both red and blue shading were found to influence the physiological responses and EO compositions of the plants, with red shading promoting slightly higher p-menthone levels in ‘Fränkische Blaue’ and ‘Multimentha’, while blue shading slightly increased carvone levels in ‘Apfelminze’. While EO content varied across harvest seasons (spring, summer, and autumn), ‘Fränkische Blaue’ responded to red shading, demonstrating an increased EO content. The findings suggest that targeted use of coloured shading nets can modulate EO quality. However, genotype-specific responses highlight the necessity of further research to define shading applications for different species and genotypes. Full article

Land desertification represents a significant and sensitive global ecological issue. In the Inner Mongolia region of China, soil desertification and salinization are widespread, resulting from the combined effects of extreme drought conditions and human activities. Using Gaofen 5B AHSI imagery as our data source, we collected spectral data for seven distinct land cover types: lush vegetation, yellow sand, white sand, saline soil, saline shell, saline soil with saline vegetation, and sandy soil. We applied Particle Swarm Optimization (PSO) to fine-tune the Wavelet Packet (WP) decomposition levels, thresholds, and wavelet basis function, ensuring optimal spectral decomposition and reconstruction. Subsequently, PSO was deployed to optimize key hyperparameters of the Random Forest algorithm and compare its performance with the ResNet-Transformer model. Our results indicate that PSO effectively automates the search for optimal WP decomposition parameters, preserving essential spectral information while efficiently reducing high-frequency spectral noise. The Genetic Algorithm (GA) was also found to be effective in extracting feature bands relevant to land desertification, which enhances the classification accuracy of the model. Among all the models, integrating wavelet packet denoising, genetic algorithm feature selection, the first-order differential (FD), and the hybrid architecture of the ResNet-Transformer, the WP-GA-FD-ResNet-Transformer model achieved the highest accuracy in extracting soil sandification and salinization, with Kappa coefficients and validation set accuracies of 0.9746 and 97.82%, respectively. This study contributes to the field by advancing hyperspectral desertification monitoring techniques and suggests that the approach could be valuable for broader ecological conservation and land management efforts. Full article

This study advances vegetation and forest mapping in temperate mixed forests by integrating airborne hyperspectral imagery (HSI) and light detection and ranging (LiDAR) data, overcoming the limitations of conventional multispectral imaging. Employing a Digital Canopy Height Model (DCHM) derived from LiDAR, our approach integrates these structural metrics with hyperspectral spectral information, alongside detailed remote sensing data extraction. Through machine learning-based clustering, which combines both structural and spectral features, we successfully classified eight specific tree species, community boundaries, identified dominant species, and quantified their abundance, contributing to precise vegetation and forest type mapping based on predominant species and detailed attributes such as diameter at breast height, age, and canopy density. Field validation indicated the methodology’s high mapping precision, achieving overall accuracies of approximately 98.0% for individual species identification and 93.1% for community-level mapping. Demonstrating robust performance compared to conventional methods, this novel approach offers a valuable foundation for National Forest Ecology Inventory development and significantly enhances ecological research and forest management practices by providing new insights for improving our understanding and management of forest ecosystems and various forestry applications. Full article

Land surface emissivity (LSE) is the most critical factor affecting land surface temperature (LST) retrieval. Understanding its variation characteristics is essential, as this knowledge provides fundamental prior constraints for the LST retrieval process. This study utilizes thermal infrared emissivity and hyperspectral data collected from diverse underlying surfaces from 2017 to 2024 to analyze LSE variation characteristics across different surface types, spectral bands, and temporal scales. Key influencing factors are quantified to establish empirical relationships between LSE dynamics and environmental variables. Furthermore, the impact of LSE models on diurnal LST retrieval accuracy is systematically evaluated through comparative experiments, emphasizing the necessity of integrating time-dependent LSE corrections into radiative transfer equations. The results indicate that LSE in the 8–11 µm band is highly sensitive to surface composition, with distinct dual-valley absorption features observed between 8 and 9.5 µm across different soil types, highlighting spectral variability. The 9.6 µm LSE exhibits strong sensitivity to crop growth dynamics, characterized by pronounced absorption valleys linked to vegetation biochemical properties. Beyond soil composition, LSE is significantly influenced by soil moisture, temperature, and vegetation coverage, emphasizing the need for multi-factor parameterization. LSE demonstrates typical diurnal variations, with an amplitude reaching an order of magnitude of 0.01, driven by thermal inertia and environmental interactions. A diurnal LSE retrieval model, integrating time-averaged LSE and diurnal perturbations, was developed based on underlying surface characteristics. This model reduced the root mean square error (RMSE) of LST retrieved from geostationary satellites from 6.02 °C to 2.97 °C, significantly enhancing retrieval accuracy. These findings deepen the understanding of LSE characteristics and provide a scientific basis for refining LST/LSE separation algorithms in thermal infrared remote sensing and for optimizing LSE parameterization schemes in land surface process models for climate and hydrological simulations. Full article

Residual dry matter (RDM) is a term used in rangeland management to describe the non-photosynthetic plant material left on the soil surface at the end of the growing season. RDM measurements are used by agencies and conservation entities for managing grazing and fire fuels. Measuring the RDM using traditional methods is labor-intensive, costly, and subjective, making consistent sampling challenging. Previous studies have assessed the use of multispectral remote sensing to estimate the RDM, but with limited success across space and time. The existing approaches may be improved through the use of spectroscopic (hyperspectral) sensors, capable of capturing the cellulose and lignin present in dry grass, as well as Unmanned Aerial Vehicle (UAV)-mounted Light Detection and Ranging (LiDAR) sensors, capable of capturing centimeter-scale 3D vegetation structures. Here, we evaluate the relationships between the RDM and spectral and LiDAR data across the Jack and Laura Dangermond Preserve (Santa Barbara County, CA, USA), which uses grazing and prescribed fire for rangeland management. The spectral indices did not correlate with the RDM (R² < 0.1), likely due to complete areal coverage with dense grass. The LiDAR canopy height models performed better for all the samples (R² = 0.37), with much stronger performance (R² = 0.81) when using a stratified model to predict the RDM in plots with predominantly standing (as opposed to laying) vegetation. This study demonstrates the potential of UAV LiDAR for direct RDM quantification where vegetation is standing upright, which could help improve RDM mapping and management for rangelands in California and beyond. Full article

Canopy chlorophyll content (CCC) is a key indicator for assessing the carbon sequestration capacity and material cycling efficiency of ecosystems, and its accurate retrieval holds significant importance for analyzing ecosystem functioning. Although numerous destructive and remote sensing methods have been developed to estimate CCC, the accurate estimation of CCC remains a significant challenge in mountainous regions with complex terrain and heterogeneous vegetation types. Through the synergistic analysis of ground hyperspectral and Sentinel-2 data, this study employed Pearson correlation analysis and spectral resampling techniques to identify Sentinel-2 blue band B1 (443 nm) and red band B4 (665 nm) as chlorophyll-sensitive bands through spectral matching with the hyperspectral reflectance of typical grassland vegetation. Based on this, we developed a new four-band vegetation index (VI), the Dual Red-edge and Coastal Aerosol Vegetation Index (DRECAVI), for estimating the CCC of heterogeneous grasslands in the middle section of the Tianshan Mountains. DRECAVI incorporates red-edge anti-saturation modules (bands B4 and B7) and aerosol correction modules (bands B1 and B8). In order to test the performance of the new index, we compared it with eight commonly used indices and a hybrid model, the Sentinel-2 Biophysical Processor (S2BP). The results indicated the following: (1) DRECAVI demonstrated the highest accuracy in CCC retrieval for mountainous vegetation (R² = 0.74, RMSE = 16.79, MAE = 12.50) compared to other VIs and hybrid methods, effectively mitigating saturation effects in high biomass areas and capturing a weak bimodal distribution pattern of CCC in the montane meadow. (2) The blue band B1 enhances atmospheric correction robustness by suppressing aerosol scattering, and the red-edge band B7 overcomes the sensitivity limitations of conventional red-edge indices (such as NDVI705, CIred-edge, and NDRE), demonstrating the potential application of the synergy mechanism between the blue band and the red-edge band. (3) Although the S2BP achieved high accuracy (R² = 0.73, RMSE = 19.83, MAE = 14.71) without saturation effects and detected a bimodal distribution of CCC in the montane meadow of the study area, its algorithmic complexity hindered large-scale operational applications. In contrast, DRECAVI maintained similar precision while reducing algorithmic complexity, making it more suitable for regional-scale grassland dynamic monitoring. This study confirms that the synergistic use of multi-source data effectively overcomes the limitations of the spectral–spatial resolution of a single data source, providing a novel methodology for the precision monitoring of mountain ecosystems. Full article

Estimating leaf water potential (Ψ_leaf) is essential for understanding plant physiological processes’ response to drought. The estimation of Ψ_leaf based on different regression analysis methods with hyperspectral vegetation indices (VIs) has been proven to be a simple and efficient technique. However, models constructed by existing methods and VIs still face challenges regarding the generalizability and limited ranges of field experiment datasets. In this study, leaf dehydration experiments of three maize cultivars were applied to provide a dataset covering a wide range of Ψ_leaf variations, which is often challenging to obtain in field trials. The analysis screened published VIs highly correlated with Ψ_leaf and constructed a model for Ψ_leaf estimation based on three algorithms—partial least squares regression (PLSR), random forest (RF), and multiple linear stepwise regression (MLR)—for each cultivar and all three cultivars. Models were constructed using PLSR and MLR for each cultivar and PLSR, MLR, and RF for the samples from all three cultivars. The performance of the models developed for each cultivar was compared with the performance of the cross-cultivar model. Simultaneously, the normalized ratio (ND) and double-difference (DDn) were applied to determine the VIs and models. Finally, the relationship between the optimal VIs and Ψ_leaf was analyzed using discontinuous linear segmental fitting. The results showed that leaf spectral reflectance variations in the 350~700 nm bands and 1450~2500 nm bands were significantly sensitive to Ψ_leaf. The RF method achieved the highest prediction accuracy when all three cultivars’ data were used, with a normalized root mean square error (NRMSE) of 9.02%. In contrast, there was little difference in the predictive effectiveness of the models constructed for each cultivar and all three cultivars. Moreover, the simple linear regression model built based on the DDn(2030,45) outperformed the RF method regarding prediction accuracy, with an NRMSE of 7.94%. Ψ_leaf at the breakpoint obtained by discontinuous linear segment fitting was about −1.20 MPa, consistent with the published range of the turgor loss point (Ψ_TLP). This study provides an effective methodology for Ψ_leaf monitoring with significant practical value, particularly in irrigation decision-making and drought prediction. Full article

Hyperspectral remote sensing using Unmanned Aerial Vehicles (UAVs) provides accurate, near real-time, and large-scale spatial estimation of the leaf area index (LAI), a significant crop variable for monitoring crop growth. In the present study, the LAI of wheat crops was estimated using high-resolution UAV-borne hyperspectral data. The PLS (Partial Least Squares) regression combined with the VIP (Variable Importance in the Projection) was used for selecting the optimum indices as feature vectors to the Extreme Gradient Boosting (Xgboost) model for predicting LAI. Twelve of twenty-seven vegetation indices were selected to develop the prediction model. On validation against the in situ measured LAI values, the prediction model shows good accuracy with an R² of 0.71. The model was used to generate a spatial map showing the variability of the LAI. Accurate mapping of LAI from high-resolution hyperspectral UAV data using machine learning models facilitates near-real-time monitoring of crop health. Full article

Vegetation indices have long been central to vegetation monitoring through remote sensing. The most popular one is the Normalized Difference Vegetation Index (NDVI), yet many vegetation indices (VIs) exist. In this paper, we investigate their distinctiveness and discriminative power in the context of applications for agriculture based on hyperspectral data. More precisely, this paper merges two complementary perspectives: an unsupervised analysis with PRISMA satellite imagery to explore whether these indices are truly distinct in practice and a supervised classification over UAV hyperspectral data. We assess their discriminative power, statistical correlations, and perceptual similarities. Our findings suggest that while many VIs have a certain correlation with the NDVI, meaningful differences emerge depending on landscape and application context, thus supporting their effectiveness as discriminative features usable in remote crop segmentation and recognition applications. Full article

Vegetation is a critical factor influencing the identification of rock outcrops using hyperspectral remote sensing data. When mixed pixels containing both vegetation and rock are formed, the spectral signatures of vegetation can partially or fully obscure the diagnostic absorption features of rocks. Based on GaoFen-5 (GF-5) Advanced Hyperspectral Imager (AHSI) data, this study employs a linear spectral mixture model to simulate sparse vegetation–rock mixed pixels. The potential of high-frequency components derived from discrete wavelet transform (DWT) to enhance lithological discrimination within sparse vegetation–rock mixed spectra was analyzed, and the findings were validated using image spectra. The results show that andesite spectra are the most susceptible to vegetation interference. Absorption features in the 2.0–2.4 μm wavelength range were identified as critical indicators for distinguishing lithologies from mixed spectra. High-frequency components extracted through the DWT of the simulated mixed spectra using the Daubechies 8 wavelet function were found to significantly improve classification performance. As vegetation content (including green grass, golden grass, bushes, and lichens) increased from 5% to 60%, the average overall accuracy improved by 15% (from 0.51 to 0.66) after using high-frequency features. The average F1-scores for granite and sandstone increased by 0.12 (from 0.68 to 0.80) and 0.20 (from 0.48 to 0.68), respectively. For AHSI image spectra, the use of high-frequency features resulted in F1-score improvements of 0.48, 0.11, and 0.09 for tuff, granite, and limestone, respectively. Although the identification of andesite remains challenging, this study provides a promising approach for improving lithological mapping accuracy using GF-5 hyperspectral data, particularly in humid and semi-humid regions. Full article

Early detection of plant water status is crucial for efficient crop management. In this research, proximal sensing tools (i.e., hyperspectral imaging HSI and thermal IR camera) were used to monitor changes in spectral and thermal profiles of a citrus orchard in Sicily (Italy), managed under five irrigation systems. The irrigation systems differ in the amount of water distribution and allow four different strategies of deficit irrigation to be obtained. The physiological traits, stem water potential, net photosynthetic rate, stomatal conductance and the amount of leaf chlorophyll were measured over the crop’s growing season for each treatment. The proximal sensing data consisted of thermal and hyperspectral imagery acquired in June–September during the irrigation seasons 2023–2024 and 2024–2025. Significant variation in physiological traits was observed in relation to the different irrigation strategies, highlighting the highest plant water stress in July, in particular for the partial root-zone drying irrigation system. The water-use efficiency (WUE) values in subsurface drip irrigation were similar to the moderate deficit irrigation treatment and more efficient (up to 50%) as compared to control. Proximal sensing measures confirmed a different plant water status in relation to the five different irrigations strategies. Moreover, four spectral indices (Normalized Difference Vegetation Index NDVI; Water Index WI; Photochemical Reflectance Index PRI; Transformed Chlorophyll Absorption Ratio Index TCARI), calculated from HSI spectra, highlighted strong correlations with physiological traits, especially with stem water potential and the amount of leaf chlorophyll (coefficient of correlation ranged between −0.4 and −0.5). This study demonstrated the effectiveness of using proximal sensing tools in precision agriculture and ecosystem monitoring, helping to ensure optimal plant health and water use efficiency. Full article

Traditional biochemical analysis methods are not only resource-intensive and time-consuming, but are increasingly inadequate for meeting the demands of modern production and quality testing. In recent years, hyperspectral imaging (HSI) technology has been widely applied as a non-destructive detection method for fruit and vegetable quality assessment. This study, based on HSI technology, systematically investigates the distribution patterns of jujube quality parameters under various drying temperature conditions. It focuses on analyzing six key quality indicators: L*, a*, b*, soluble solid content (SSC), hardness, and moisture content. HSI was used to acquire reflectance (R), absorbance (A), and Kubelka–Munk (K-M) spectral data of jujubes at various drying temperatures, followed by several spectral preprocessing methods, including standard normal variate (SNV), baseline correction (baseline), and Savitzky–Golay first derivative (SG1st). Subsequently, a nonlinear support vector regression (SVR) model was used to perform regression modeling for the six quality parameters. The results demonstrate that the SG1st preprocessing method significantly enhanced the predictive capability of the model. For the predictions of L*, a*, b*, SSC, hardness, and moisture content, the best inversion models achieved coefficients of determination $R_p^2$ of 0.9972, 0.9970, 0.9857, and 0.9972, respectively. To further enhance modeling accuracy, deep learning models such as bidirectional long short-term memory (BiLSTM), bidirectional gated recurrent unit (BiGRU), and convolutional neural network–bidirectional gated recurrent unit (CNN-BiGRU) were introduced and compared comprehensively under the optimal spectral preprocessing conditions. The results demonstrate that deep learning models significantly improved modeling accuracy, with the CNN-BiGRU model performing particularly well. Compared to the SVR model, the $R_p^2$ values for L*, a*, b*, SSC, hardness, and moisture increased by 0.005, 0.007, 0.008, 0.011, 0.007, and 0.006, respectively; the $RPD$ values increased by 0.036, 0.04, 0.26, 0.462, 0.428, and 0.216. This study provides important insights into the further application of HSI technology in the quality monitoring and optimization of the jujube drying process. Full article

: Mangrove forests are one of the ecosystems with the richest biodiversity and the highest functional value of ecosystem services in the world. For mangrove research, it is particularly important to facilitate mangrove mapping, plant species classification, biomass, and carbon sink estimation using remote sensing technologies. Recently, more and more studies have combined unmanned aerial vehicles and remote sensing technology to estimate plant traits and the biomass of mangrove forests. Various multispectral and hyperspectral data are used to establish various vegetation indices for plant classification, and data models for biomass estimation and carbon sink calculation. This study systematically reviews the use of remote sensing and unmanned aerial vehicles in mangrove studies during the past three decades based on 2424 peer-reviewed papers. By synthesizing these studies, we identify the pros and cons of different indices and models developed from remote sensing technologies by sorting out past cases. Specifically, we review the use of remote sensing technologies in mapping the past and present area, plant species composition, and biomass of mangrove forests and examine the threats to the degradation of mangrove forests. Our findings reveal that there is increasing integration of machine learning and remote sensing to facilitate mangrove mapping and species identification. Moreover, multiple sources of remote sensing data tend to be combined to improve species classification accuracy and enhance the precision of mangrove biomass estimates when integrated with field-based data. Full article