Search Results (56)

Background and Objective: This study aimed to evaluate the impact of early functional rehabilitation on clinical outcomes and tuberosity healing in older patients undergoing reverse shoulder arthroplasty for proximal humeral fractures. We hypothesized that early functional rehabilitation would not compromise tuberosity healing and would result in comparable or improved outcomes versus postoperative immobilization. Methods: This retrospective matched-pair analysis included patients aged 70 years or older who underwent reverse shoulder arthroplasty for proximal humeral fractures, with 12 to 24 months of follow-up. Group allocation was time-based: earlier patients received immobilization and later patients underwent early rehabilitation. Matching was based on sex, age, body mass index, fracture classification (Neer), and glenosphere size. Outcomes included patient-reported scores, range of motion, and radiographic assessment of tuberosity healing using standardized imaging. Results: Forty patients (20 per group) with a mean age of 80.7 years and a mean follow-up of 16.1 months were included. The early rehabilitation group demonstrated significantly higher Constant scores (p = 0.044), age- and sex-adjusted Constant scores (p = 0.033), and greater active external rotation (p = 0.002). Anatomical tuberosity healing was seen in 28 of 40 patients (70%). Greater tuberosity healing occurred in 75% and lesser tuberosity healing in 85% of patients with available axial imaging. One deep infection occurred in the early rehabilitation group and was successfully managed. Conclusions: Early functional rehabilitation after reverse shoulder arthroplasty in older adults with proximal humerus fractures improved functional outcomes without compromising tuberosity healing. Full article

Background: In reverse shoulder arthroplasty (RSA), preservation of the subscapularis (SSC) has gained attention because of its biomechanical and functional significance. However, when SSC preservation is attempted using the conventional deltopectoral (DP) approach, glenoid visualization and instrument access may be limited. The purpose of this Technical Note is to describe a modified deltopectoral exposure technique, hereafter referred to as the Margin-Shifted, Yawing, Subscapularis-Sparing, and Transitioned Lateralized Deltopectoral (MYST–LDP) approach, and to assess its feasibility in primary RSA. Methods: The MYST–LDP approach incorporates a laterally shifted incision apex, a proximally oriented curved arc (“yawing”) toward the acromion, complete preservation of the subscapularis, and a distally transitioned limb aligned with the anterior humeral axis. We describe the surgical technique and our initial experience in three consecutive primary RSA cases performed using an inlay implant system to minimize humeral lateralization and allow focused assessment of exposure geometry. Results: In all cases, the SSC was preserved without conversion to a standard DP exposure. Adequate glenoid visualization was achieved using three retractors without excessive soft-tissue tension, allowing controlled glenoid preparation and component implantation without additional exposure or conversion. No approach-related intraoperative complications were observed. Conclusions: The MYST–LDP approach is a feasible modification of the deltopectoral exposure that preserves both SSC and the deltoid while facilitating glenoid visualization and instrument alignment. This technique represents an ergonomic and tissue-preserving option within the familiar DP framework for surgeons performing SSC-preserving RSA. Further comparative and quantitative studies are warranted to determine its clinical value. Full article

Articular fractures require precise anatomical reduction and rigid fixation to heal appropriately. In veterinary cases that involve fracturing of the lateral humeral condyle, cortical bone screws inserted in lag fashion with Kirschner wire are the preferred method for surgical fixation. However, relatively high complication rates associated with cortical lag screws (CLSs) highlights the need to investigate alternate screw designs. Variable-pitch headless compression screws (VPHCSs) are unique as they advance beneath the cortical surface. Although the use of VPHCSs are widely utilised in human orthopaedics, the current use in veterinary orthopaedics is limited. This study aimed to evaluate the peak interfragmentary force (PIF) and area of compression (AOC) generated by a 3.5 mm self-tapping cortical screw placed in lag fashion and a 3.5 mm VPHCS inserted to four depths. PIF and AOC were measured using a pressure-sensitive film placed between two blocks of polyurethane foam (0.24 g/cm³), simulating a transverse fracture. CLSs were inserted by hand into predrilled 2.5 mm pilot holes. PIF and AOC were measured at full insertion. VPHCSs were placed into predrilled 2.5 mm pilot holes, followed by a 3.5 mm tapered countersink. The screw was inserted until the head was level with the surface. PIF and AOC were measured between the two blocks. The screw was continued until the head was at a depth of 2, 5, and 9 mm below the surface, and the PIF and AOC were measured again at each stage. There was no detectable difference in PIF and AOC between CLSs and VPHCSs countersunk to −2 mm (PIF–CLS: Mean = 12.886, SD = 2.370; 2 mm: Mean = 17.301, SD = 8.858, p = 0.319; AOC–CLS: Mean = 0.936, SD = 0.291; 2 mm: Mean = 0.925, SD = 0.447, p = 0.872). VPHCSs countersunk to −5 mm and −9 mm produced significantly greater PIF compared to CLSs (5 mm: Mean = 16.086, SD = 6.799, p = 0.002; 9 mm: Mean = 34.987, SD = 4.015, p < 0.001). VPHCSs countersunk to −5 and −9 mm produced significantly greater PIF and AOC compared to CLSs in this model. Further investigation is required to produce recommendations for clinical use. Full article

Background/Objectives: Transphyseal fracture of the distal humerus (TFDH) is a rare but clinically important pediatric elbow injury that predominantly affects children under 3 years of age. Due to the radiolucent nature of the cartilaginous distal humeral epiphysis in this age group, TFDH is often misdiagnosed as elbow dislocation, supracondylar fracture, or lateral/medial condyle fracture. Time pressures, limited pediatric musculoskeletal expertise, and incomplete clinical histories in emergency settings further compound this diagnostic challenge. Despite the importance of early and accurate diagnosis to prevent complications such as cubitus varus, systematic studies on diagnostic pitfalls and strategies for improving recognition remain scarce. We therefore aim to characterize misclassification patterns, standardize radiographic cues, and evaluate management outcomes. Methods: We conducted a single-center retrospective review of 25 pediatric patients with TFDH who were misdiagnosed at initial presentation between 2012 and 2022. Clinical records, radiographic features, treatment modalities, and complications were analyzed over a minimum follow-up period of 24 months. Results: All 25 cases were initially misdiagnosed. The most common misdiagnoses were supracondylar and lateral condyle fractures (each 6/25, 24%), followed by elbow dislocation (4/25, 16%). Misclassification was primarily attributed to failure to assess global forearm–humerus alignment and misinterpretation of the radiocapitellar line. All patients underwent emergency management, with 18/25 (72%) receiving closed reduction and percutaneous K-wire fixation, and 7/25 (28%) undergoing closed reduction and cast immobilization. Cubitus varus developed in 5/25 (20%) overall and was more frequent after closed reduction with cast immobilization (3/7, 43%) than after K-wire fixation (2/18, 11%). Overall, 92% achieved excellent functional outcomes according to the Mayo Elbow Performance Index (MEPI). The implementation of a targeted curriculum improved diagnostic accuracy among trainees from 70% to 100%. Conclusions: TFDH poses substantial cognitive and radiographic diagnostic challenges. A structured radiographic assessment, early senior review, and targeted education may improve recognition and outcomes. These findings offer actionable insights to enhance diagnostic accuracy and optimize care for this vulnerable patient population. Full article

Background: Humeral shaft fractures (HSFs) represent 13–25% of humeral fractures and are frequently complicated by radial nerve palsy and nonunion. While conservative management was historically preferred, surgical fixation with intramedullary nailing (IMN) has gained increasing popularity. The aim of this study was to evaluate the effectiveness of IMN in the treatment of HSFs, focusing on postoperative complications and functional outcomes. Methods: A bicenter retrospective analysis was conducted on 202 patients who underwent antegrade IMN fixation for HSF between 2014 and 2019, with a minimum follow-up of four years. Demographic data, trauma characteristics, surgical details, and postoperative complications were recorded. Functional outcomes were assessed at one year using the Disabilities of the Arm, Shoulder and Hand (DASH), Oxford Shoulder Score (OSS), Constant Shoulder Score (CSS), and Visual Analogue Scale (VAS). Statistical analysis included ANOVA, Student’s t-test, Spearman’s correlation, and multivariate regression. Results: The mean follow-up was 57.7 ± 19.6 months. At one year, mean OSS, DASH, CSS, and VAS scores were 39.0, 16.6, 73.5, and 0.9, respectively. Excellent or good Constant outcomes were recorded in 89.6% of patients. Sixteen complications (7.9%) occurred, including nerve injuries (4.0%) and pseudoarthrosis (1.5%). Patients operated within 48 h had significantly better functional scores compared to those treated later (p < 0.01). No differences were found according to fracture pattern, sex, diabetes, or osteoporosis. Age showed a weak correlation with functional outcomes. Conclusions: IMN is a safe and effective option for the treatment of HSFs, with high rates of functional recovery and a low incidence of complications. Early surgical intervention appears to improve outcomes, supporting its role as a valuable strategy in HSF management. Full article

Background: Glenoid radiolucenct lines (gRLL) and glenoid component subsidence (gSC) after anatomic total shoulder arthroplasty (aTSA) have traditionally been linked to implant loosening and functional decline. However, their impact on long-term clinical outcomes remains unclear. This study aimed to evaluate whether gRLL and gSC are associated with inferior clinical or functional results in patients without revision surgery. Methods: In this retrospective study, 52 aTSA cases (2008–2015) were analyzed with a minimum of five years of clinical and radiographic follow-up. Based on final imaging, patients were categorized according to the presence and extent of gRLL and gSC. Clinical outcomes included the Constant-Murley Score, DASH, VAS for pain, and range of motion (ROM). Radiographic parameters included the critical shoulder angle (CSA), acromiohumeral distance (AHD), lateral offset (LO), humeral head-stem index (HSI), and cranial humeral head decentration (DC). Group comparisons were conducted between: (1) ≤2 vs. 3 gRLL zones, (2) 0 vs. 1 zone, (3) 0 vs. 3 zones, (4) gSC vs. no gSC, and (5) DC vs. no DC. Results: Demographics and baseline characteristics were comparable across groups. Functional scores (Constant, DASH), pain (VAS), and ROM were largely similar. Patients with extensive gRLL showed reduced external rotation (p = 0.01), but the difference remained below the MCID. Similarly, gSC was associated with lower forward elevation (p = 0.04) and external rotation (p = 0.03), both below MCID thresholds. No significant differences were observed for DC. Conclusions: Neither extensive gRLL nor gSC significantly impaired long-term clinical or functional outcomes. As these radiographic changes can occur in the absence of symptoms, regular radiographic monitoring is essential, and revision decisions should be made individually in cases of progressive bone loss. Full article

Adding a fibular strut bone graft to locking plate fixation has been introduced to improve stability and prevent varus collapse. The purpose of this study was to perform finite element analysis (FEA) of the biomechanical characteristics of different insertion angles of the fibular strut graft in proximal humerus fractures. Proximal humerus fractures with metaphyseal comminution and instability were simulated by creating wedge-shaped osteotomies medially and laterally for varus and valgus models, respectively. Three-dimensional finite element models were reconstructed from computed tomography images. A locking compression plate with a length of 90 mm (three holes) was applied to the proximal humerus fracture model. Fibular allografts were inserted at 0° and 30° to the humeral shaft. Axial and traction forces of 70°, 90°, and 110° relative to the vertical axis were applied to each model to simulate stress on the plate and graft. At axial loads, stresses in both the plate and the graft were lower when the graft was inserted at 0° than at 30°. Under traction loads, plate stress was lower with 30° insertion. Graft stress was also lower with 30° in most experimental conditions in both the valgus and varus models. These findings suggest that oblique insertion may provide biomechanical advantages under traction forces in unstable proximal humerus fractures. Full article

The French Bulldog is a breed predisposed to lateral humeral intercondylar fractures. A transcondylar lag screw combined with an epicondylar pin is most commonly used for their repair. However, improper screw and pin placement is common. This study used a 3D-printed plastic bone model, designed from a 5-year-old 19.5 kg French Bulldog’s humerus. Then, a 3D-printed drill guide was designed specifically for a lateral humeral condylar fracture. The bone models were divided into two groups: the first group included the use of the 3D-printed drill guide during the screw and pin placement, and the second group did not. After implantation, we compared the angle deviation of the transcondylar screw and the epicondylar pin, as well as the exit point translation of the transcondylar screw. The results showed differences between the two groups. The first group exhibited a lower angle deviation than the second group. Additionally, the exit point translation of the transcondylar screw was reduced in the drill guide group. The use of a custom-designed 3D-printed drill guide significantly improved the accuracy of the transcondylar screw and epicondylar pin placement. This advancement could reduce the incidence of postoperative complications. Full article

Background and Clinical Significance: Non-prosthetic peri-implant fractures (NPPIFs) are rare injuries occurring around internal fixation devices, and are distinct from periprosthetic fractures. While most studies focus on the femur, humeral NPPIFs remain poorly documented. This case illustrates a complex humeral NPPIF and highlights key surgical considerations. Case Presentation: A 62-year-old woman presented with a spiral humeral shaft fracture (AO 12B2) after a fall. Following closed reduction and antegrade intramedullary nailing, an intraoperative peri-implant fracture occurred at the distal interlocking screw. CT imaging revealed a complex fracture extending from the lateral condyle to the proximal humerus. Treatment included implant removal and open reduction with dual plate fixation—lateral distal and helically contoured proximal plates—plus cerclage bands and antibiotic-loaded beads. Recovery was uneventful, with a full range of motion achieved at six months. At one year, the DASH score and MEPS were 86 and 75, respectively. Conclusions: Humeral NPPIFs are challenging and require individualized, biomechanically sound strategies. This case reinforces the importance of intraoperative assessment and careful implant selection in humeral fracture management. Full article

Background: The brachial plexus is a network of nerves responsible for the motor and sensory innervation of the upper limb. Variations in the formation and course of the brachial plexus are well documented, though combinations of multiple unilateral abnormalities are rare. The complex pathology of this structure nerve may result in clinical consequences. We present a unique set of brachial plexus abnormalities involving the C4–C6 nerve roots, superior and middle trunks, additional communicating branches, and delayed median nerve union. Case Presentation: During the routine dissection of a 70-year-old female cadaver, several unique variations in the brachial plexus anatomy were identified. The C4 root contributed to C5 before the superior trunk formed, resulting in a superior trunk composed of C4–C6. The C5 root was located anterior to the anterior scalene muscle, whereas C6 maintained its usual posterior position. Additionally, an anterior communicating branch from the middle trunk to the posterior cord was observed. A communicating branch between the lateral and medial cords split into two terminal branches: one merged with the ulnar nerve, and the other joined the medial contribution of the median nerve. The median nerve contributions from the lateral and medial cords merged approximately two inches above the elbow. Conclusions: This rare combination of brachial plexus anomalies has not been previously described in the literature and is of significant clinical relevance. The additional anterior communicating branch from the middle trunk may suggest potential flexor muscle innervation by the posterior cord, which typically innervates extensor muscles. Additionally, the delayed convergence of the median nerve may provide a protective mechanism in cases of midshaft humeral fracture. Awareness of these peripheral nerve abnormalities is important for diagnostic imaging, surgery, or peripheral nerve blocks. Knowledge of such variations is critical for clinicians managing upper limb pathologies. Full article

Background: The coracohumeral ligament (CHL) is inserted in the coracoid process, from which it extends laterally and caudally, blending with the tendinous insertions of the subscapularis muscle and the supraspinatus muscle, with a third intermediate area between the muscles inserted between the humeral tubercles, and it contributes to the fibrous tunnel that engulfs the long head of the biceps tendon. Most previous studies mention insertions from the base of the coracoid process, but not from the tip, and some authors describe anterior and posterior columns. In contrast, others stress the existence of superficial and deep fascicles. Also, the relationship between the coracohumeral and the glenohumeral ligaments is unclear. Given the position of the CHL covering most of the rotator interval, and its role in the stability of the shoulder capsule and pathologies like frozen shoulder, a clear description of its fascicles in a plane-wise manner might be helpful for a selective surgical approach. Methods: We studied sixteen soft-embalmed shoulders to avoid misclassifying fascicles due to formalin-linked tissue amalgamation. Further histological assessment was performed on the two remaining non-embalmed shoulders. Results: In our sample, the coracohumeral ligament hung from the anterior and posterior edges of the coracoid process’ inferior surface, defining two columns that converged near the tip of the coracoid process. Both columns were formed by superficial and deep fascicles directed to different depths of the rotator cuff, usually via the rotator interval, fusing with the connective tissue around the muscles without direct distal attachments. We performed histological and morphometrical assessments, and we discuss clinical and biomechanical implications. Conclusions: The coracohumeral ligament contains four fascicles that fuse with the connective tissue of the shoulder joint, forming a double necklace around the subscapularis and supraspinatus. Therefore, its functions probably extend beyond simple vertical stabilization. Full article

Supracondylar humeral fractures are the most common type of elbow fractures in children. The treatment methods vary depending on the type of fracture (Gartland classification), which can be conservative or surgical. There is no clear consensus or guidelines to dictate the treatment of complicated supracondylar humeral fractures (Gartland types II and III). Gartland type II and III fractures are most frequently treated with closed reduction and percutaneous Kirchner-wire pinning or open reduction with K-wire pinning, depending on the degree of displacement and the orthopedic surgeon’s preference. Most studies recommend avoiding open reduction because of prolonged hospitalization and higher rates of complications. Orthopedic surgeons have different opinions regarding the Kirschner pin placement technique. Studies suggest that only lateral pinning is safe and effective, but medial and lateral pinning is proven to give more stability; there is always a risk of iatrogenic ulnar nerve damage during surgery. Modern treatment of supracondylar humeral fracture in children should focus on minimally invasive techniques and avoid open reduction, when possible, to ensure the best outcome for the patients. This scoping review’s purpose is to gather the available information on the topic in one place and to underline the lack of clear protocols. Full article

This prospective, experimental, randomised, assessor-blinded cadaveric study was undertaken to describe the sono-anatomical features of the radial, ulnar, median and musculocutaneous (RUMM) nerves in rabbits and to develop and evaluate an ultrasound (US)-guided proximal RUMM block technique comparing a medial versus a lateral approach. A total of 13 adult rabbit cadavers were used. In Phase I of the study, four cadavers were used for anatomical dissection and to design and test a lateral and medial single injection point US-guided proximal RUMM block technique, while in Phase II, the medial and lateral approaches were randomly performed on nine cadavers administering 0.1 mL kg⁻¹ injectate. After dissection, nerve staining was categorised as adequate (all nerves stained ≥4 mm) or inadequate (at least one nerve not stained or stained <4 mm). Staining spread was compared with Fisher’s exact test, with p < 0.05 considered statistically significant. From Phase I, the axillary fascia containing all RUMM nerves was identified. The radial nerve exited the fascia right after the humeral head. In the lateral approach, the transducer was angled at 80° to the humerus longitudinal axis. In the medial approach, the transducer was placed perpendicularly to the humerus longitudinal axis. In both approaches, the brachial artery appeared as a rounded and anechoic structure, the musculocutaneous nerve as hypoechoic and oval and the radial nerve as a honeycomb, and the ulnar and median nerves were identified adjacent to each other. The radial nerve was selected as the injection point for both approaches using an in-plane technique. In Phase II, the injectate was found outside the axillary fascia in zero out of nine and five out of nine thoracic limbs, with an adequate staining in nine of nine and two of nine injections (p < 0.01) using the medial and lateral approach, respectively. Thus, a US-guided proximal RUMM block technique is feasible in rabbits, and the medial approach demonstrated evidence of a more consistent stain of the RUMM nerves. Full article

This study compares the compression force of cortical screws used in lag fashion with partially threaded cannulated screws and fully threaded headless cannulated screws as fixation methods for humeral condylar fractures in dogs. Cadavers of eleven dogs weighing an average of 10.99 ± 2.51 kg (6.1–14.4 kg) were used. The humeri were subjected to simulated fracture by performing an osteotomy at the trochlea of humerus and classified into three groups: Group 1 applied a 3.0 mm cortical screw applied in a lag fashion, Group 2 applied a 3.0 mm partially threaded cannulated screw, and Group 3 applied a 3.5 mm fully threaded headless cannulated screw. The samples were then placed in a material testing machine, and a compression force was applied vertically to the lateral condyle until failure. There were statistically significant differences in failure load between the groups (p = 0.009). The maximum failure load in Group 3 was significantly higher than in Group 2 (p = 0.014), while there were no statistically significant differences between Group 1 and Group 2) or between Group 1 and Group 3. Partially threaded cannulated screws and fully threaded headless cannulated screws can be alternatives to traditional stabilization methods, offering simpler procedures and additional advantages. Full article

Background/Objectives: Physical shoulder offset parameters (SOPs) play important roles in the diagnosis and treatment of shoulder diseases. However, there is little research analyzing SOPs in healthy shoulders using cross-sectional MRI images, especially in Asians. Therefore, this study aimed to establish physiological reference values of shoulder parameters for Asian populations. Methods: This was a retrospective imaging study using MRI images of the shoulder joints of 500 patients (mean age: 55.9 ± 14.0 years). We measured the following SOPs of the normal joint: HO, GO, lateral glenoidal humeral offset (LGHO), humeral shaft axis offset (HAO), and cortical offset (CO). In addition, the offset parameters were examined for associations with age, gender, side, and osteoarthritis. Results: The mean HO was 22.9 (±2.4) mm, the mean GO was 62.3 (±6.6) mm, the mean LGHO was 48.9 (±4.2) mm, the mean HAO was 25.2 (±2.8) mm, and the mean CO was 15.7 (±2.7) mm. Male patients exhibited significantly higher values across all SOPs compared to female patients. In addition, there was a significantly lower mean value for HAO in left shoulders (HAO: 24.7± 2.8 mm vs. 25.5 ± 2.8 mm, p = 0.011). There was a negatively significant correlation between age and all SOPs. No significant difference in mean values was noted between shoulders with osteoarthritis and non-osteoarthritis in any SOPs. Conclusions: Significant gender- and age-specific differences were noted for all measured SOPs. In addition, right shoulders did not show higher mean SOP values than left shoulders, except for HAO, suggesting that the contralateral joint is a reliable reference for surgical planning. These findings should be considered in shoulder surgery planning. Full article