Search Results (72)

Background: There are no clear guidelines to support management decisions for patients with three-part fractures of the proximal humerus. The aim of the study is to identify the treatment used and to assess the functional and radiological outcomes at follow-up. Methods: A total of 126 patients were retrospectively included in the study and were divided into two groups based on the type of surgery: plate and nail group. We collected data on the patient’s sex, age, fracture type, surgery duration, fracture healing, initial and final neck–shaft angles, shoulder joint score, and complications. Results: A total of 69 patients received locking-plate internal fixation, while 77 patients underwent fixation with intramedullary nail. The two groups were comparable, with no significant differences observed in age, sex, or the number of patients. The average operation time for the locking-plate group (88.7 ± 10.5 min) was significantly longer compared to the intramedullary nail group (70.2 ± 8.3 min). The Constant–Murley score was 91.2 ± 6.7 (range 79–98) in the plate group and 90.5 ± 7.7 (range 80–98) in the nail group, with no statistically significant difference. Complications were observed in 16 patients (23.2%) of the locking-plate group and in 7 patients (9.1%) of the intramedullary nail group, with significant difference. Conclusions: Our assessment revealed no significant differences in fracture healing times, loss of reduction, or Constant–Murley scores between two groups. However, our results suggest that intramedullary nails have an advantage over locking plates in terms of reduced operation time and complications. Full article

This report provides a concise selective representative overview of the predictor factors for progression in Idiopathic Scoliosis (IS). The Cobb angle method, rib hump deformity, imaging and advanced techniques for assessing skeletal maturity serve as key elements in evaluating prognostic factors for IS progression based on the patient’s age at diagnosis—particularly in Infantile Idiopathic Scoliosis (IIS), Juvenile Idiopathic Scoliosis (JIS), and Adolescent Idiopathic Scoliosis (AIS). The commonly used approaches for determining skeletal maturity include the assessment of the iliac apophysis and scoliosis curve deterioration, the Sanders skeletal maturity staging system, the distal radius and ulna (DRU) classification for predicting growth spurts and curve progression in IS, as well as the ossification of vertebral epiphyseal rings, the humeral head, and the calcaneal apophysis. Prognostic factors influencing IS progression are further discussed in relation to the patient’s age at onset—whether in infancy, childhood, or adolescence—as well as in both untreated and braced AIS patients. Additionally, the apical convex rib–vertebra angle in AIS is explored as an indicator of progression. Predictors for curve progression at skeletal maturity are outlined, along with various models for forecasting IS deterioration. Lastly, the Rib and Segmental Rib Index, a rib cage deformity parameter, is introduced as a predictor of scoliosis progression. In conclusion, this concise and selective overview of predictor factors for progression in IS highlights the current understanding of IS progression factors. It also introduces the Rib and Segmental Rib Index—a rib cage deformity parameter—as a predictor of IS progression. Full article

Background: The coracohumeral ligament (CHL) is inserted in the coracoid process, from which it extends laterally and caudally, blending with the tendinous insertions of the subscapularis muscle and the supraspinatus muscle, with a third intermediate area between the muscles inserted between the humeral tubercles, and it contributes to the fibrous tunnel that engulfs the long head of the biceps tendon. Most previous studies mention insertions from the base of the coracoid process, but not from the tip, and some authors describe anterior and posterior columns. In contrast, others stress the existence of superficial and deep fascicles. Also, the relationship between the coracohumeral and the glenohumeral ligaments is unclear. Given the position of the CHL covering most of the rotator interval, and its role in the stability of the shoulder capsule and pathologies like frozen shoulder, a clear description of its fascicles in a plane-wise manner might be helpful for a selective surgical approach. Methods: We studied sixteen soft-embalmed shoulders to avoid misclassifying fascicles due to formalin-linked tissue amalgamation. Further histological assessment was performed on the two remaining non-embalmed shoulders. Results: In our sample, the coracohumeral ligament hung from the anterior and posterior edges of the coracoid process’ inferior surface, defining two columns that converged near the tip of the coracoid process. Both columns were formed by superficial and deep fascicles directed to different depths of the rotator cuff, usually via the rotator interval, fusing with the connective tissue around the muscles without direct distal attachments. We performed histological and morphometrical assessments, and we discuss clinical and biomechanical implications. Conclusions: The coracohumeral ligament contains four fascicles that fuse with the connective tissue of the shoulder joint, forming a double necklace around the subscapularis and supraspinatus. Therefore, its functions probably extend beyond simple vertical stabilization. Full article

This prospective, experimental, randomised, assessor-blinded cadaveric study was undertaken to describe the sono-anatomical features of the radial, ulnar, median and musculocutaneous (RUMM) nerves in rabbits and to develop and evaluate an ultrasound (US)-guided proximal RUMM block technique comparing a medial versus a lateral approach. A total of 13 adult rabbit cadavers were used. In Phase I of the study, four cadavers were used for anatomical dissection and to design and test a lateral and medial single injection point US-guided proximal RUMM block technique, while in Phase II, the medial and lateral approaches were randomly performed on nine cadavers administering 0.1 mL kg⁻¹ injectate. After dissection, nerve staining was categorised as adequate (all nerves stained ≥4 mm) or inadequate (at least one nerve not stained or stained <4 mm). Staining spread was compared with Fisher’s exact test, with p < 0.05 considered statistically significant. From Phase I, the axillary fascia containing all RUMM nerves was identified. The radial nerve exited the fascia right after the humeral head. In the lateral approach, the transducer was angled at 80° to the humerus longitudinal axis. In the medial approach, the transducer was placed perpendicularly to the humerus longitudinal axis. In both approaches, the brachial artery appeared as a rounded and anechoic structure, the musculocutaneous nerve as hypoechoic and oval and the radial nerve as a honeycomb, and the ulnar and median nerves were identified adjacent to each other. The radial nerve was selected as the injection point for both approaches using an in-plane technique. In Phase II, the injectate was found outside the axillary fascia in zero out of nine and five out of nine thoracic limbs, with an adequate staining in nine of nine and two of nine injections (p < 0.01) using the medial and lateral approach, respectively. Thus, a US-guided proximal RUMM block technique is feasible in rabbits, and the medial approach demonstrated evidence of a more consistent stain of the RUMM nerves. Full article

As yet, no systematic review on commercial deep learning-based auto-segmentation (DLAS) software for breast cancer radiation therapy (RT) planning has been published, although NRG Oncology has highlighted the necessity for such. The purpose of this systematic review is to investigate the performances of commercial DLAS software packages for breast cancer RT planning and methods for their performance evaluation. A literature search was conducted with the use of electronic databases. Fifteen papers met the selection criteria and were included. The included studies evaluated eight software packages (Limbus Contour, Manteia AccuLearning, Mirada DLCExpert, MVision.ai Contour+, Radformation AutoContour, RaySearch RayStation, Siemens syngo.via RT Image Suite/AI-Rad Companion Organs RT, and Therapanacea Annotate). Their findings show that the DLAS software could contour ten organs at risk (body, contralateral breast, esophagus-overlapping area, heart, ipsilateral humeral head, left and right lungs, liver, and sternum and trachea) and three clinical target volumes (CTVp_breast, CTVp_chestwall, and CTVn_L1) up to the clinically acceptable standard. This can contribute to 45.4%–93.7% contouring time reduction per patient. Although NRO Oncology has suggested that every clinical center should conduct its own DLAS software evaluation before clinical implementation, such testing appears particularly crucial for Manteia AccuLearning, Mirada DLCExpert, and MVision.ai Contour+ as a result of the methodological weaknesses of the corresponding studies such as the use of small datasets collected retrospectively from single centers for the evaluation. Full article

Background and Objectives: The aim of this study was to investigate the relationship between the position of the humeral head relative to the glenoid and the occurrence of iatrogenic surgical neck fractures of the humerus during anterior glenohumeral dislocation reductions. Materials and Methods: Patients with first-time anterior shoulder dislocations without generalized joint hyperlaxity were included. The humeral head displacement ratio was calculated as the distance between the medial border of the humeral head and the anterior glenoid rim divided by the diameter of the humeral head. Demographic data, concomitant tuberculum majus fractures, and the deltoid tuberosity index were recorded. Patients were divided into three groups: Group 1 (iatrogenic fracture development during closed reduction (CR)), Group 2 (failed CR), and Group 3 (successful reduction without iatrogenic fracture). Complicated dislocations were included in Groups 1 and 2, while uncomplicated dislocations were those in Group 3. Results: The study included 89 patients with a mean age of 46.44 ± 19.02 years (64 males, 25 females). Concomitant tuberculum majus fractures occurred in 37 (41.6%) cases. Iatrogenic surgical neck fractures occurred in 10 patients (Group 1), and CR was unsuccessful in 8 patients (Group 2), totaling 18 cases of complicated dislocations. Reduction without iatrogenic fracture was achieved in 71 cases (Group 3). The mean humeral head displacement ratio was higher in the complex dislocation group (92.91 ± 15.34 vs. 75.01 ± 13.80; p < 0.001). Complicated dislocations were more frequent in patients with tuberculum majus fractures (p = 0.031). Subgroup analysis showed higher humeral head displacement ratios in Groups 1 and 2 compared to Group 3 (p = 0.010 and p = 0.06, respectively). Tuberculum majus fractures were more frequent in Group 1 compared to Group 3 (p = 0.013), with no significant difference between Groups 2 and 3. Conclusions: In patients experiencing first-time traumatic anterior shoulder dislocations, a greater medial displacement of the humeral head relative to the glenoid rim significantly increases the risk of iatrogenic humeral fractures and the likelihood of unsuccessful closed reduction attempts. Full article

This paper presents a detailed gross description of all anatomical elements of the humerus in the African green monkey and provides comparative and differential elements on monkey osteology. The osteometric investigation adds value to the gross morphological investigation, adjoining metric data to the gross descriptive data set. An in-depth investigation of the microstructural aspects of the humeral bone tissue is provided, with qualitative and quantitative details and potential for diagnostic applications. Of the gross morphological elements described, several unique features specific to this species include the humeral head shape that presents with distinctive low convexity and caudal placement, the shape of the intertubercular groove, the less developed greater tubercle, and the disposition of the rotator cuff muscle insertion. Furthermore, the overall cranio-lateral curvature of the bone shaft was found to have a distinctive 154–155 degree of angulation of the diaphysis, and the well-developed medial epicondyle was observed with its distinctive medio-caudal retroflexion. The histological investigation was more indicative of a typical non-primate organization of the bone tissue, with laminar vascular and avascular structures combined with the presence of the secondary Haversian system involving a mixture of scattered and dense unorganized secondary osteonal structures. The histomorphometric investigation yielded metrical data for the secondary osteonal structures in terms of area (20,331 ± 5105 µm²), perimeter, and vascular canal area (64,769 ± 257 µm²). Full article

Objectives: The purpose of this study was to prospectively investigate the progression of cartilage thinning in patients with symptomatic rotator cuff tears using MRI. Methods: Two hundred twenty-five consecutive patients with symptomatic rotator cuff tears visited our institute between 2009 and 2019. Of these, 28 shoulders of 27 patients (mean age, 65 years) who underwent at least two magnetic resonance imaging (MRI) examinations were prospectively enrolled. They all received conservative treatment. The mean follow-up was 67 months. Changes in cartilage thickness and the combined cartilage and subchondral bone thickness at the initial and final MRI were measured using a RadiAnt DICOM-viewer (Medixant, Poznan, Poland). The cartilage thickness of the humeral head was measured in the oblique coronal and sagittal images. The glenoid cartilage was measured in the axial and oblique coronal images. Results: At an average period of 5 years, 12 of 28 shoulders (42%) showed more than a 30% decrease in cartilage thickness in the humeral head. The glenoid showed cartilage thinning in only one shoulder (4%). In the humeral head, progressive cartilage thinning was seen mainly in the anterior and posterior parts of the humeral head in the sagittal plane. In the glenoid, progressive cartilage thinning was seen on the entire surface except the posterior area. There was no significant difference in cartilage thickness between the first and final follow-ups for both the humeral head and the glenoid. Conclusions: A total of 12 of 28 shoulders (42%) showed more than a 30% decrease in cartilage thickness in the humeral head, which was mainly observed in the anterior and posterior areas of the humeral head. Full article

Studies addressing the anatomical values of the supraspinatus outlet area (SOA) and the available supraspinatus outlet area (ASOA) are insufficient. This study focused on precisely measuring the SOA and ASOA values in a sample from the Chinese population using 3D CT (computed tomography) reconstruction. We analyzed CT imaging of 96 normal patients (59 males and 37 females) who underwent shoulder examinations in a hospital between 2011 and 2021. The SOA, ASOA, acromiohumeral distance (AHD), coracohumeral distance (CHD), coracoacromial arch radius (CAR), and humeral head radius (HHR) were estimated, and statistical correlation analyses were performed. There were significant sex differences observed in SOA (men: 957.62 ± 158.66 mm²; women: 735.87 ± 95.86 mm²) and ASOA (men: 661.35 ± 104.88 mm²; women: 511.49 ± 69.26 mm²), CHD (men: 11.22 ± 2.24 mm; women: 9.23 ± 1.35 mm), CAR (men: 37.18 ± 2.70 mm; women: 33.04 ± 3.15 mm), and HHR (men: 22.65 ± 1.44 mm; women: 20.53 ± 0.95 mm). Additionally, both SOA and ASOA showed positive and linear correlations with AHD, CHD, CAR, and HHR (R: 0.304–0.494, all p < 0.05). This study provides physiologic reference values of SOA and ASOA in the Chinese population, highlighting the sex differences and the correlations with shoulder anatomical parameters. Full article

Background: Proximal humerus fractures are common fractures of the elderly population which can lead to long-term compromise of a patient’s shoulder function. Closed reduction and internal fixation with intramedullary nailing is a well-established surgical technique yielding good outcomes, as perceived by patients, obtained via Patient-Reported Outcome Measures, and objectified by clinical shoulder testing. Apart from conventional range-of-motion testing and clinical shoulder tests, strength testing of the shoulder is a yet-neglected but meaningful and standardizable outcome parameter. In this study, isometric shoulder strength is evaluated in relation to fracture morphology/postoperative reduction quality as well as with patient-reported outcomes. Methods: 25 patients (mean age 73.2 ± 10.5 years) underwent isometrics strength-testing of the shoulder joint in the scapular plane (abduction) as well as in the sagittal plane (flexion) as well as hand-grip strength-testing at 4.5 ± 1.88 years follow-up. Pre- and postoperative radiographs were analysed. Patients completed ASES and CMS questionnaires. Results: Patients exhibited a decrease in abduction and flexion force (−24.47% and −25.30%, respectively, p < 0.001) using the contralateral, uninjured arm as reference. Abduction force tended to be decreased in three- and four-part fractures. Patient satisfaction correlated negatively with the relatively reduced force of the affected arm. Varus-angulated humeral heads produced significantly lower abduction force output than valgus- or physiologic angulation (p = 0.014), whereas flexion force was unaffected (p = 0.468). The anatomical reduction had no influence on shoulder strength. Conclusions: Proximal humerus fractures may cause a significant reduction in shoulder function, both reported by patients and objectified by shoulder strength testing. Varus head angulation demonstrated the greatest loss of shoulder strength and should be avoided to ensure proper functioning. Further, strength testing seems a valuable outcome parameter for a thorough shoulder examination with easy obtainability. Full article

Purpose: This study aimed to identify the demographic-, radiographic-, and surgery-related factors influencing postoperative functional internal rotation (fIR) following reverse total shoulder arthroplasty (RTSA). Methods: In this retrospective cohort study, patients who underwent RTSA between June 2013 and April 2018 at a single institution were assigned to two groups (“IROgood” or “IRObad”). Patients were classified as having good fIR (≥8 points in the Constant–Murley score (CS) and fIR to the twelfth thoracic vertebra or higher) or poor fIR (≤2 points in the CS and fIR to the twelfth thoracic vertebra or lower) after RTSA with a single implant model. The minimum follow-up period was two years. Standardized shoulder-specific scores (Visual Analogue Scale (VAS), Simple Shoulder Test (SST), American Shoulder and Elbow Surgeons Score (ASES), Constant–Murley score (CS)) were used to assess the pre- and postoperative functional status of patients. Postoperative radiographic evaluation included the distalization shoulder angle (DSA), lateralization shoulder angle (LSA), critical shoulder angle (CSA), acromiohumeral distance (AHD), glenoid inclination (GI), medialization of the center of rotation (COR), lateralization of the humerus, and distalization of the greater tuberosity. Additionally, preoperative evaluation included rotator cuff arthropathy according to Hamada, glenoid version, anterior or posterior humeral head subluxation, and fatty infiltration of the rotator cuff according to Goutallier. Univariate analysis of demographic, surgical, radiographic, and implant-associated parameters was performed to identify factors associated with postoperative fIR. The Shapiro–Wilk test assessed the normal distribution of the data. Intergroup comparisons regarding demographic and surgery-related factors were conducted using the Mann–Whitney-U Test. Radiographic changes were compared using chi-square or Fisher’s exact tests. The significance level was set at p < 0.05. Results: Of a total of 42 patients, 17 (age: 73.7 ± 5.0 years, follow-up (FU) 38 months [IQR 29.5–57.5]) were included in the “IRObad” group, and 25 (age: 72 ± 6.1 years, FU 47 months [IQR 30.5–65.5]) were included in the “IROgood” group. All patients were treated with the same type of implant (glenosphere size: 36 mm, 14.3%; 39 mm, 38.1%; 42 mm, 47.6%; neck-shaft angle: 135° in 68.0%; 155° in 32.0%) and had comparable indications. Univariate analysis did not reveal any of the investigated demographic, radiographic, or surgery-related parameters as risk factors for poor postoperative fIR (p > 0.05). Conclusion: None of the investigated factors, including implant-associated parameters, influenced postoperative fIR after RTSA in this cohort. Full article

Background: Neglected anterior glenohumeral dislocations provide a challenging problem for physicians. For many patients with these injuries, reverse shoulder arthroplasty has been the treatment of choice, although the preservation of the patient’s own humeral head might have significant advantages. Methods: We present a case of a 66-year-old male with a neglected anterior glenohumeral dislocation that he sustained 6 weeks prior when he was hit by a car as a pedestrian. Radiographic imaging revealed a large off-track Hill-Sachs deformity and a fracture of the greater tuberosity in addition to the persisting glenohumeral dislocation. We performed open reduction and to aid stability, an infraspinatus tendon remplissage and a Latarjet procedure were performed. Results: Apart from minor and self-limiting neuropraxia, recovery was without complications. At 24 month follow-up, the patient had no impairment in general activities, had no residual pain, and had a good active range of motion. Conclusions: The authors, therefore, believe that a combination of infraspinatus tendon remplissage and the Latarjet procedure seems a feasible alternative for reverse shoulder arthroplasty and can preserve the patient’s own humeral head. Full article

When performing surgical treatment for shoulder dislocation, the Remplissage procedure for large Hill-Sachs lesions, which correspond to off-track lesions, has been reported to yield satisfactory results using an arthroscopic approach. However, in cases of high-energy acute dislocation or acute-on-chronic dislocation, when the humeral head bony defect is too large, severe external rotation limitation may occur postoperatively, and if the bone quality is poor, there is a higher risk of anchor pull-out, leading to potential failure. To overcome these limitations, we opted to apply subscapularis augmentation instead, aiming to achieve satisfactory results. A 21-year-old male patient underwent subscapularis augmentation for a right shoulder dislocation accompanied by severe glenoid bone loss following seizures. Two years and three months later, he experienced another seizure episode without recurrence of right shoulder dislocation and showed satisfactory clinical outcomes. However, he developed a left shoulder dislocation. Therefore, we report a case of subscapularis augmentation as an alternative treatment for shoulder dislocation with significant glenoid bone loss. We aim to present a satisfactory outcome along with a literature review on this approach. Full article

Evaluation of the 3D bone morphology of the glenohumeral joint is necessary for pre-surgical planning. Zero echo time (ZTE) magnetic resonance imaging (MRI) provides excellent bone contrast and can potentially be used in the place of computed tomography. Segmentation of the shoulder anatomy, particularly the humeral head and the acetabulum, is needed for the detailed assessment of each anatomy and for pre-surgical preparation. In this study, we compared the performance of two popular deep learning models based on Google’s DeepLab and U-Net to perform automated segmentation on ZTE MRI of human shoulders. Axial ZTE images of normal shoulders (n = 31) acquired at 3-Tesla were annotated for training with DeepLab and 2D U-Net, and the trained model was validated with testing data (n = 13). While both models showed visually satisfactory results for segmenting the humeral bone, U-Net slightly over-estimated while DeepLab under-estimated the segmented area compared to the ground truth. Testing accuracy quantified by Dice score was significantly higher (p < 0.05) for U-Net (88%) than DeepLab (81%) for the humeral segmentation. We have also implemented the U-Net model onto an MRI console for push-button DL segmentation processing. Although this is an early work with limitations, our approach has the potential to improve shoulder MR evaluation hindered by manual post-processing and may provide clinical benefit for quickly visualizing bones of the glenohumeral joint. Full article

We established a protocol for assessing the areal bone mineral density (BMD) of the proximal humerus using dual-energy X-ray absorptiometry (DXA). We also investigated the correlation between the BMD of the proximal humerus and that of the lumbar spine and proximal femur to predict the BMD of the proximal humerus. We included female patients aged >60 years who underwent bone density evaluation using DXA. The BMD of the proximal humerus was calculated at seven regions of interest (ROIs): the head of the humerus, lesser tubercle, greater tubercle in two locations, and proximal metaphysis in three locations. The intra- and inter-examiner reliabilities in the setting of the ROIs were examined using intraclass correlation coefficients (ICCs) (1.1) and (2.1), respectively, and the intra-examiner reliability in DXA was examined using ICCs (1.1). The intra- and inter-examiner reliabilities in the setting of ROIs and the intra-examiner reliability in DXA were high in all regions. The BMD of the lumbar spine and proximal femur correlated weakly with that of the humeral head and diaphysis. Our method for measuring the BMD of the proximal humerus was found to be reliable and may be applied in future studies. Full article