Search Results (322)

Ship structures are subjected to cyclic loading from waves and currents during operation, which can lead to fatigue failure, particularly at locations with structural discontinuities such as welds. Although various fatigue assessment methods have been developed, there is a lack of experimental data and comparative studies for actual ship structure details. This study addresses this limitation by evaluating the fatigue strength of longi-web connections in hull structures using local stress approaches, including hot spot stress, effective notch stress, notch stress intensity factor, and structural stress methods. Finite element analyses were conducted, and the predicted fatigue lives and failure locations were compared with experimental results. Although there are some differences between each method, all methods are valid and reasonable for predicting the primary failure locations and evaluating fatigue life. These findings provide a basis for considering suitable fatigue assessment methods for welded ship structures with respect to joint geometry and failure mechanisms. Full article

This story began half a century ago with the discovery of an unusually high presence of tryptophan (Trp, W) in transthyretin (TTR), one of the three carrier proteins of thyroid hormones. With the Trp-rich retinol-binding protein (RBP), TTR forms a plasma complex implicated in the delivery of retinoid compounds to body tissues. W has the lowest concentration among all AAs involved in the sequencing of human body proteins. The present review proposes molecular maps focusing on the ratio of W/AA residues found in the sequence of proteins involved in immune events, allowing us to ascribe the guidance of inflammatory processes as fully under the influence of W. Under the control of cytokine stimulation, plasma biomarkers of protein nutritional status work in concert with major acute-phase reactants (APRs) and with carrier proteins to release, in a free and active form, their W and hormonal ligands, interacting to generate hot spots affecting the course of acute stress disorders. The prognostic inflammatory and nutritional index (PINI) scoring formula contributes to identifying the respective roles played by each of the components prevailing during the progression of the disease. Glucagon demonstrates ambivalent properties, remaining passive under steady-state conditions while displaying stronger effects after cytokine activation. In developing countries, inappropriate weaning periods lead to toddlers eating W-deficient cereals as a staple, causing a dramatic reduction in the levels of W-rich biomarkers in plasma, constituting a novel nutritional deficiency at the global scale. Appropriate counseling should be set up using W implementations to cover the weaning period and extended until school age. In adult and elderly subjects, the helpful immune protections provided by W may be hindered by the surge in harmful catabolites with the occurrence of chronic complications, which can have a significant public health impact but lack the uncontrolled surges in PINI observed in young infants and teenagers. Biomarkers of neurodegenerative and neoplastic disorders measured in elderly patients indicate the slow-moving elevation of APRs due to rampant degradation processes. Full article

While the explosive growth in e-commerce stresses urban logistics systems, city planners lack of fine-grained data in order to anticipate and manage the resulting freight flows. Using a three-stage analytical approach combining descriptive zonal statistics, hotspot analysis and different regression modeling from univariate to geographically weighted regression, this study integrates one year of parcel deliveries from a leading courier with open spatial layers of land-use zoning, census population, mobile-signal activity and household income to model last-mile demand across different land use types. A baseline linear regression shows that residential population alone accounts for roughly 30% of the variance in annual parcel volumes (2.5–3.0 deliveries per resident) while adding daytime workforce and income increases the prediction accuracy to 39%. In a similar approach where coefficients vary geographically with Geographically Weighted Regression to capture the local heterogeneity achieves a significant raise of the overall R² to 0.54 and surpassing 0.70 in residential and institutional districts. Hot-spot analysis reveals a highly fragmented pattern where fewer than 5% of blocks generate more than 8.5% of all deliveries with no apparent correlation to the broaden land-use classes. Commercial and administrative areas exhibit the greatest intensity (1149 deliveries per ha) yet remain the hardest to explain (global R² = 0.21) underscoring the importance of additional variables such as retail mix, street-network design and tourism flows. Through this approach, the calibrated models can be used to predict city-wide last-mile demand using only public inputs and offers a transferable, privacy-preserving template for evidence-based freight planning. By pinpointing the location and the land uses where demand concentrates, it supports targeted interventions such as micro-depots, locker allocation and dynamic curb-space management towards more sustainable and resilient urban-logistics networks. Full article

This study aimed to analyse the spatiotemporal evolution of phytoplankton community dynamics and its underlying mechanisms in the Liaoning section of the Liao River Basin in 2010, 2015, and 2020. Phytoplankton species diversity increased significantly, with an increase from three phyla and 31 species in 2010 to six phyla and 74 species in 2020. Concurrent increases in α-diversity indicated continuous improvements in habitat heterogeneity. The community structure shifted from a diatom-dominated assemblage to a green algae–diatom co-dominated configuration, contributing to an enhanced water purification capacity. The upstream agricultural zone (Tieling section) had elevated biomass and low diversity, indicating persistent non-point-source pollution stress. The midstream urban–industrial zone (Shenyang–Anshan section) emerged as a phytoplankton diversity hotspot, likely due to expanding niche availability in response to point-source pollution control. The downstream wetland zone (Panjin section) exhibited significant biomass decline and delayed diversity recovery, shaped by the dual pressures of resource competition and habitat filtering. The driving mechanism of community succession shifted from nutrient-dominated factors (NH₃-N, TN) to redox-sensitive factors (DO, pH). These findings support a ‘zoned–graded–staged’ ecological restoration strategy for the Liao River Basin and inform the use of phytoplankton as bioindicators in watershed monitoring networks. Full article

The expansion of global maritime activities threatens marine ecosystems and biodiversity. Collisions between ships and marine megafauna profoundly impact vulnerable species such as whales, who serve as keystone predators. However, the specific regions most heavily affected by shipping traffic and the multi-species facing collision risk remain poorly understood. Here, we analyzed global shipping data to assess the distribution of areas with high shipping pressure and identify global hotspots for whale–ship collisions. The results reveal that high-pressure habitats are primarily distributed within exclusive economic zones (EEZs), which are generally consistent with the distribution of collision hotspots. High-pressure habitats exhibit significant spatial mismatch: 32.9% of Marine Protected Areas endure high shipping stress and yet occupy merely 1.25% of protected ocean area. Additionally, 25.1% of collision hotspots (top 1% risk) affect four or more whale species, forming critical aggregation in regions like the Gulf of St. Lawrence and Northeast Asian marginal seas. Most of these high-risk areas lack protective measures. These findings offer actionable spatial priorities for implementing targeted conservation strategies, such as the introduction of mandatory speed restrictions and dynamic vessel routing in high-risk, multi-species hotspots. By focusing on critical aggregation areas, these strategies will help mitigate whale mortality and enhance marine biodiversity protection, supporting the sustainable coexistence of maritime activities with vulnerable marine megafauna. Full article

Monitoring the peak junction hotspot temperature in IGBT modules is critical for ensuring the reliability of high-power industrial multilevel inverters, particularly when operating under extreme thermal conditions, such as in traction applications. This study presents a comprehensive chip-level analytical loss and thermal model for estimation of the peak junction hotspot temperature in a three-level T-type neutral-point-clamped (TNPC) IGBT module. The developed model includes a detailed analytical assessment of conduction and switching losses, along with transient thermal network modeling, based on the actual electrical and thermal characteristics of the IGBT module. Additionally, a hybrid thermal–electrical stress experimental setup, designed to replicate real operating conditions, was implemented for a balanced three-phase inverter circuit utilizing a Semikron three-level IGBT module, with testing currents reaching 100 A and a critical case temperature of 125 °C. The analytically estimated module losses and peak junction hotspot temperatures were validated through direct experimental measurements. Furthermore, thermal simulations were conducted with Semikron’s SemiSel benchmark tool to cross-validate the accuracy of the thermo-electrical model. The outcomes show a relative estimation error of less than 1% when compared to experimental data and approximately 1.15% for the analytical model. These findings confirm the model’s accuracy and enhance the reliability evaluation of TNPC-IGBT modules in extreme thermal environments. Full article

Based on the engineering background of a new type of segmental-assembled steel temporary beam buttress, the fatigue strength evaluation method of the steel box girders with open longitudinal ribs was taken as the research objective. The fatigue stress calculation analysis and the full-scale fatigue loading test for the steel box girder local component were carried out. The accuracy of the finite-element model was verified by comparing it with the test results, and the rationality of the fatigue strength evaluation methods for welded joints was deeply explored. The results indicate that the maximum nominal stress occurs at the weld toe between the transverse diaphragm and the top plate at the edge of the loading area, which is the fatigue-vulnerable location for the steel box girder local components. The initial static-load stresses at each measuring point were in good agreement with the finite-element calculation results. However, the static-load stress at the measuring point in the fatigue-vulnerable position shows a certain decrease with the increase in the number of cyclic loads, while the stress at other measuring points remains basically unchanged. According to the finite-element model, the fatigue strengths obtained by the nominal stress method and the hot-spot stress method are 72.1 MPa and 93.8 MPa, respectively. It is reasonable to use the nominal stress S-N curve with a fatigue life of 2 million cycles at 70 MPa and the hot-spot stress S-N curve with a fatigue life of 2 million cycles at 90 MPa (FAT90) to evaluate the fatigue of the welded joints in steel box girders with open longitudinal ribs. According to the equivalent structural stress method, the fatigue strength corresponding to 2 million cycles is 94.1 MPa, which is slightly lower than the result corresponding to the main S-N curve but within the range of the standard deviation curve. The research results of this article can provide important guidance for the anti-fatigue design of welded joints in steel box girders with open longitudinal ribs. Full article

Plant–endophyte symbioses are widespread in grasslands. While symbiotic interactions often provide hosts with major fitness enhancements, the role of the endophyte Alternaria oxytropis, which produces swainsonine in locoweeds (Oxytropis and Astragalus spp.), remains enigmatic. We compared endophyte-infected (E+) and endophyte-free (E−) plants of three main Chinese locoweed species (O. kansuensis, O. glabra, and O. ochrocephala) under controlled conditions, and analyzed environmental factors at locoweed poisoning hotspots for herbivores. The results demonstrated significant species-specific effects: E+ plants of O. glabra and O. ochrocephala exhibited 26–39% reductions in biomass, net photosynthetic rate, and stomatal conductance, with elevated CO₂ levels, while O. kansuensis showed no measurable impacts. Swainsonine concentrations were 16–20 times higher in E+ plants (122.6–151.7 mg/kg) than in E− plants. Geospatial analysis revealed that poisoning hotspots for herbivores consistently occurred in regions with extreme winter conditions (minimum temperatures ≤ −17 °C and precipitation ≤ 1 mm during the driest month), suggesting context-dependent benefits under abiotic stress. These findings suggest that the ecological role of A. oxytropis may vary depending on both host species and environmental context, highlighting a trade-off between growth costs and potential stress tolerance conferred by A. oxytropis. The study underscores the need for field validation to elucidate the adaptive mechanisms maintaining this symbiosis in harsh environments. Full article

High-Bandwidth Memory (HBM) enables the bandwidth required by modern AI and high-performance computing, yet its three dimensional stack traps heat and amplifies thermo mechanical stress. We first review how conventional solutions such as heat spreaders, microchannels, high density Through-Silicon Vias (TSVs), and Mass Reflow Molded Underfill (MR MUF) underfills lower but do not eliminate the internal thermal resistance that rises sharply beyond 12layer stacks. We then synthesize recent hybrid bonding studies, showing that an optimized Cu pad density, interface characteristic, and mechanical treatments can cut junction-to-junction thermal resistance by between 22.8% and 47%, raise vertical thermal conductivity by up to three times, and shrink the stack height by more than 15%. A meta-analysis identifies design thresholds such as at least 20% Cu coverage that balances heat flow, interfacial stress, and reliability. The review next traces the chain from Coefficient of Thermal Expansion (CTE) mismatch to Cu protrusion, delamination, and warpage and classifies mitigation strategies into (i) material selection including SiCN dielectrics, nano twinned Cu, and polymer composites, (ii) process technologies such as sub-200 °C plasma-activated bonding and Chemical Mechanical Polishing (CMP) anneal co-optimization, and (iii) the structural design, including staggered stack and filleted corners. Integrating these levers suppresses stress hotspots and extends fatigue life in more than 16layer stacks. Finally, we outline a research roadmap combining a multiscale simulation with high layer prototyping to co-optimize thermal, mechanical, and electrical metrics for next-generation 20-layer HBM. Full article

Expansion relief groove (ERG) controlling excess arch expansion has become a research hotspot. Based on statistical arch expansion data, this paper proposes a novel structural design for ERG, selecting asphalt-treated base (ATB-25) and graded gravel (GG) as fill materials for trial paving. Through three years of monitoring, the temperature, stress, and displacement across the two solutions were comparatively analyzed to evaluate their control effectiveness. The results indicated five points. (1) The reasonable spacing of the expansion through should be 200 m, and the width should not be less than 50 cm in ERG structure design. (2) The annual temperature difference of ATB-25 ERG (55 °C) > GG ERG (51 °C) > cement-treated base (CTB) (47 °C). The large annual temperature difference causes the expansion of the base. (3) The performance of ERGs is highly correlated with the seasonal alternation. The compressive stress increases in summer, resulting in compressive deformation, and decreases in winter, resulting in extended deformation. (4) According to three years of monitoring, the plastic deformation accumulated, and the compression deformation in the two ERGs increased to 155% and 943.47% of that in the first year. The expansion pressure in the base layer is constrained, resulting in compression deformation of the base. (5) GG is more suitable as the filler of the ERG to deal with arch expansion disease and demonstrates excellent cost-effectiveness. Full article

The management and use of saline–alkaline land is a global concern and research focus. Although there is extensive long-term global research on soil salinization and improvement, systematic summaries of research progress in this field are insufficient. This study, based on the Web of Science (WOS) and incoPat database, analyzes the literature and patents on saline–alkaline land over the past 30 years, sums up research progress and current status, and proposes future directions to lay a foundation for further study. Research hotspots are mainly salt-tolerant plant growth mechanisms and gene expression under salt stress, interactions between salt-tolerant plants and microbes, soil conditioner use, remote sensing monitoring of saline–alkaline land changes, irrigation and drainage techniques, and soil nutrient status and improvement. Saline–alkaline land management research is moving toward integrated application of multiple improvement measures. Priority should be given to developing land remediation technologies and salt-tolerant plant varieties suited to different regions; studying the compatibility among technologies, plant varieties, and cultivation techniques; establishing region- and type-specific integrated management and ecological use methods; and creating comprehensive development plans to boost soil productivity and protect the ecology. Full article

This study investigates urban warming in Rajshahi City, Bangladesh, by examining changes in land surface temperature (LST) from 1990 to 2023 and exploring its relationship with key biophysical factors. LST was derived from Landsat thermal imagery, and both spatial and temporal variations were analyzed using Geographic Information Systems (GIS). Key biophysical indices, including Normalized Difference Vegetation Index (NDVI), Normalized Difference Built-up Index (NDBI), Normalized Difference Water Index (NDWI), Normalized Difference Moisture Index (NDMI), and Normalized Difference Bareness Soil Index (NDBSI), were calculated using corresponding Landsat satellite sensors, and they evaluated the impact of LULC types (vegetation, water, soil, and built-up areas) on thermal variations. LULC was derived following the Support Vector Machine classification technique. The Urban Thermal Field Variance Index (UTFVI) was employed to assess surface urban heat island (SUHI) effects, warming conditions, ecological stress, and thermal comfort zones. Spatial trend and hotspot analyses of LST change were performed using spatial trend analysis and the Getis-Ord Gi* statistic, respectively. Linear regression analysis examined the relationship between LST and biophysical indices. Results show that winter mean LST increased by 2.66 °C during the 33-year period, with maximum LST rising by 4.29 °C. The most significant warming occurred in central-northern, central-western, and south-eastern zones. The rise in LST and the growing intensity of SUHI effects are largely due to urban growth, especially where green spaces and water bodies have been replaced by impervious surfaces. Hotspot analysis identified clusters of high-temperature zones, while UTFVI analysis confirmed a marked expansion of strong heat island conditions, especially in central urban areas. Linear regression results showed notable links between LST and key biophysical variables, where higher LST values were commonly linked to greater built-up density and declines in vegetation cover and surface water. Overall, the results highlight the need for better urban planning approaches such as increasing green cover, using permeable materials, and adopting strategies that can adapt to climate impacts. This study presents a framework for analyzing urban climate dynamics that can be adapted to other rapidly growing cities, aiding efforts to promote sustainable development and build urban resilience. Full article

Urban campuses face critical environmental challenges due to high pedestrian density, traffic-induced air pollution, and thermal stress, especially in compact Mediterranean settings. These conditions can compromise the usability and livability of outdoor spaces. This study investigates whether greening and material-based interventions can offset a lower degree of traffic reduction in improving air quality and thermal comfort. The University Campus of Catania (Southern Italy) served as the case study. An integrated microscale simulation framework using ENVI-met was developed, calibrated, and validated with local traffic, meteorological data, and field measurements of PM₁₀ and PM_2.5. Three scenarios were tested: a baseline, Scenario 1 (50% traffic reduction with moderate greening), and Scenario 2 (30% traffic reduction with more extensive greening and material interventions). Results showed that Scenario 1 consistently outperformed Scenario 2 in all pedestrian hotspots. The highest reductions recorded in Scenario 1 were −0.150 μg/m³ for PM_2.5 (−11.5%), −0.069 μg/m³ for PM₁₀ (−5.9%), −2.16 °C for UTCI (−7.6%), and −2.52 °C for MRT (−4.5%). These findings confirm that traffic reduction is the dominant factor in achieving environmental improvements, although greening and innovative materials play a valuable complementary role. The study supports integrated planning strategies for climate-responsive and healthier university environments. Full article

Ageing is influenced by a complex interplay of genetic, environmental, and lifestyle factors, with increasing evidence highlighting the exposome as a key determinant of healthspan. This review explores the impact of environmental exposures, focusing in particular on pollution, endocrine disruptors, and climate change on the development of age-related diseases such as cardiovascular diseases (CVDs), cancer, and metabolic disorders. Additionally, it examines protective factors that contribute to healthy ageing. A comprehensive literature review was conducted using PubMed, Scopus, and Google Scholar, focusing on studies published between 2000 and 2025. Findings indicate that chronic exposure to pollutants accelerates cellular ageing through mechanisms such as oxidative stress, inflammation, and epigenetic dysregulation. In contrast, longevity hotspots—Blue Zones, Cilento and the mountain villages of Sicily (Sicani and Madonie Mountains)—illustrate how traditional dietary patterns, strong social structures, and reduced environmental toxicity contribute to exceptional health and longevity. Mechanistically, exposome-driven alterations in immune-inflammatory pathways and epigenetic regulation play a central role in modulating ageing trajectories. Understanding these interactions is essential for developing targeted strategies to mitigate harmful exposures and enhance protective factors. This review underscores the urgent need for integrative public health policies that address the environmental determinants of ageing, ultimately promoting a longer and healthier lifespan. Full article

High-temperature micro-electro-mechanical systems (MEMSs) are critical for applications in extreme environments and applications where the operating temperature can exceed 1000 °C, but their long-term performance is limited by complex failure mechanisms, including material degradation caused by atomic migration. This study introduces a simulation-assisted approach to analyze and predict the dominant failure modes, focusing on vacancy fluxes and their driving forces, within high-temperature MEMS structures. The focus is on tungsten-based structures operating at a temperature of 1580 °C. This approach couples electric-, stress- and temperature-dependent simulations to evaluate atomic migration pathways, which are key contributors to failure. This study demonstrates that void accumulation, driven by vacancy migration, results in localized current density increase, hotspot formation, and accelerated structural degradation. The mean time to failure (MTTF) is shown to have exponential dependence on temperature and inverse-square dependence on current density, highlighting the critical role of these parameters in device reliability. These findings provide a deeper understanding of the failure mechanisms in high-temperature MEMSs and underscore the need for design strategies that mitigate electromigration and stress-induced void growth to enhance device performance and longevity. Full article