Search Results (366)

The complexity of land types and the limited spatial resolution of Synthetic Aperture Radar (SAR) imagery have led to widespread mixed-pixel contamination in radar backscatter images. The radar backscatter echo signals from a mixed pixel are often a combination of backscattering contributions from multiple endmembers. The signal mixture of endmembers within mixed pixels hinders the establishment of accurate relationships between pure endmembers’ parameters and the corresponding backscatter coefficient, thereby significantly reducing the accuracy of surface parameter inversion. However, few studies have focused on decomposing and estimating the pure backscatter signals within mixed pixels. This paper proposes a novel approach based on hyperspectral unmixing techniques and the microwave backscatter contribution decomposition (MBCD) model to estimate the pure backscatter coefficients of all Endmembers within mixed pixels. Experimental results demonstrate that the model performance varied significantly with endmember abundance. Specifically, high accuracy was achieved in estimating soil backscattering coefficients when vegetation coverage was below 25% ($R^2\approx 0.88$, with 98% of pixels showing relative errors within 0–20%); however, this accuracy declined as vegetation coverage increased. For grass endmembers, the model maintained high estimation precision across the entire grassland area (vegetation coverage 0.2–0.8), yielding an of 0.80 with 83% of pixels falling within the 0–20% relative error range. In addition, the model performance is influenced by the number of endmembers. Full article

Elevation Digital Beamforming (DBF) technology is key to achieving high-resolution wide-swath (HRWS) imaging in spaceborne Synthetic Aperture Radar (SAR) systems. However, multi-channel DBF-SAR systems face a prominent conflict between the need for real-time channel error calibration and the constraints of limited on-board hardware resources. To address this bottleneck, this paper proposes a real-time channel error calibration method based on Fast Fourier Transform (FFT) pulse compression and introduces a “calibration-operation” dual-mode control with a parameter-persistence architecture. This scheme decouples high-complexity computations by confining them to the system initialization phase, enabling on-board, real-time, closed-loop compensation for multi-channel signals with low resource overhead. Test results from a high-performance Field-Programmable Gate Array (FPGA) platform demonstrate that the system achieves high-precision compensation for inter-channel amplitude, phase, and time-delay errors. In the 4-channel system validation, the DBF synthesized signal-to-noise ratio (SNR) improved by 5.93 dB, reaching a final SNR of 44.26 dB. This performance approaches the theoretical ideal gain and significantly enhances the coherent integration gain of multi-channel signals. This research fully validates the feasibility of on-board, real-time calibration with low resource consumption, providing key technical support for the engineering robustness and efficient data processing of new-generation SAR systems. Full article

High-precision and efficient building extraction by fusing visible and synthetic aperture radar (SAR) imagery is critical for applications such as smart cities, disaster response, and UAV navigation. However, existing approaches often rely on complex multimodal feature extraction and deep fusion mechanisms, resulting in over-parameterized models and excessive computation, which makes it challenging to balance accuracy and efficiency. To address this issue, we propose a dual-branch lightweight architecture, DLiteNet, which functionally decouples the multimodal building extraction task into two sub-tasks: global context modeling and spatial detail capturing. Accordingly, we design a lightweight context branch and spatial branch to achieve an optimal trade-off between semantic accuracy and computational efficiency. The context branch jointly processes visible and SAR images, leveraging our proposed Multi-scale Context Attention Module (MCAM) to adaptively fuse multimodal contextual information, followed by a lightweight Short-Term Dense Atrous Concatenate (STDAC) module for extracting high-level semantics. The spatial branch focuses on capturing textures and edge structures from visible imagery and employs a Context-Detail Aggregation Module (CDAM) to fuse contextual priors and refine building contours. Experiments on the MSAW and DFC23 Track2 datasets demonstrate that DLiteNet achieves strong performance with only 5.6 M parameters and extremely low computational costs (51.7/5.8 GFLOPs), significantly outperforming state-of-the-art models such as CMGFNet (85.2 M, 490.9/150.3 GFLOPs) and MCANet (71.2 M, 874.5/375.9 GFLOPs). On the MSAW dataset, DLiteNet achieves the highest accuracy (83.6% IoU, 91.1% F1-score), exceeding the best MCANet baseline by 1.0% IoU and 0.6% F1-score. Furthermore, deployment tests on the Jetson Orin NX edge device show that DLiteNet achieves a low inference latency of 14.97 ms per frame under FP32 precision, highlighting its real-time capability and deployment potential in edge computing scenarios. Full article

Deep learning-based synthetic aperture radar (SAR) automatic target recognition (ATR) methods exhibit a tendency to overfit specific operating conditions—such as radar parameters and background clutter—which frequently leads to high sensitivity against variations in these conditions. A novel electromagnetic reconstruction feature alignment (ERFA) method is proposed in this paper, which integrates electromagnetic reconstruction with feature alignment into a fully convolutional network, forming the ERFA-FVGGNet. The ERFA-FVGGNet comprises three modules: electromagnetic reconstruction using our proposed orthogonal matching pursuit with image-domain cropping-optimization (OMP-IC) algorithm for efficient, high-precision attributed scattering center (ASC) reconstruction and extraction; the designed FVGGNet combining transfer learning with a lightweight fully convolutional network to enhance feature extraction and generalization; and feature alignment employing a dual-loss to suppress background clutter while improving robustness and interpretability. Experimental results demonstrate that ERFA-FVGGNet boosts trustworthiness by enhancing robustness, generalization and interpretability. Full article

As a core component of MEMS LiDAR, the 2D MEMS mirror, with high-precision optical angle detection, is a key technology for radar scanning and imaging. Existing piezoresistive detection schemes of mirrors suffer from high fabrication complexity, high temperature sensitivity, and a limited accuracy of only 0.08°, failing to meet the requirements for vehicular and airborne scanning applications. This study focuses on a two-dimensional electromagnetic MEMS mirror. Based on the reflection principles of geometric optics, angle detection schemes with photodiode (PD) arrays are analyzed. A novel four-quadrant optical measurement sensor featuring a 16-PD array is proposed. This design replaces conventional large-area PDs with a compact PD array, effectively mitigating nonlinearity and low accuracy issues caused by oversized PD trenches and edge dimensions. High-precision detection of the mirror’s deflection angle is achieved by measuring the current variations induced by the reflected spot position on the PDs in each quadrant. The experimental results demonstrate that the 16-PD array optical angle sensor achieves an accuracy between 0.03° and 0.036° over a detection range of ±8°. Full article

The tidal mudflat of the South Yellow Sea is characterized by complex sediment environments that preserve rich paleoenvironmental signals, making it an important area for understanding land–sea interactions and promoting sustainable coastal development. Thus, accurate identification of sediment sequences and layer thicknesses becomes crucial for interpreting sediment dynamics and paleoenvironmental reconstruction. While borehole data have elucidated local sediment facies, their spatially discontinuous nature hinders a holistic reconstruction of regional depositional history. To overcome this limitation, ground-penetrating radar (GPR) surveys were conducted across the tidal mudflat of the South Yellow Sea, enabling systematic correlation between radar reflection patterns and sediment architectures. Based on the relationship between the dielectric permittivity and wave velocity, short-time Fourier transform (STFT) was applied to derive the peak-weighted average frequency in the frequency domain for individual soil layers, revealing its dependence on dielectric properties. Sediment interfaces and layer thicknesses were determined using three methods: the radar image waveform method, the Hilbert spectrum instantaneous phase method, and the generalized S-transform time–frequency analysis method. The results indicate the following: (1) GPR enables high-fidelity imaging of subsurface stratigraphy, successfully resolving three distinct radar facies: F1: high-amplitude, horizontal, continuous reflections with parallel waveforms; F2: moderate-to-high-amplitude, sinuous continuous reflections with parallelism; and F3: medium-amplitude, discontinuous chaotic reflections. (2) All three methods effectively characterize subsurface soil stratification, but positioning accuracy decreases systematically with depth. Excluding anomalous errors at one site, the relative error for most layers within the 1 m depth is below 15%, and remains ≤25% at the 1–2 m depth. Beyond the 2 m depth, reliable stratification becomes unattainable due to severe signal attenuation. (3) Comparative analysis demonstrates that the Hilbert spectral instantaneous phase method significantly enhances GPR signals, achieving an optimal performance with positioning errors consistently below 5 cm for most soil layers. The application of this approach along the tidal mudflat of the South Yellow Sea significantly enhances the precision of sediment layer boundary identification. Our analysis systematically interpreted radar facies, demonstrating the effectiveness of the Hilbert spectrum instantaneous phase method in delineating soil stratification. These findings offer reliable technical support for interpreting GPR data in comparable sediment environments. Full article

Synthetic Aperture Radar (SAR) images generated via range-Doppler (RD) model-based geometric correction often suffer from non-negligible systematic geolocation errors due to cumulative impacts of platform positioning inaccuracies, payload time synchronization offsets, and atmospheric propagation delays. These errors limit the applicability of SAR data in high-precision geometric applications, especially in scenarios where ground control points (GCPs)—traditionally used for calibration—are inaccessible or costly to acquire. To address this challenge, this study proposes a novel GCP-free high-precision geolocation method based on multi-view SAR image fusion, integrating outlier detection, weighted fusion, and refined estimation strategies. The method first establishes a positioning error correlation model for homologous point pairs in multi-view SAR images. Under the assumption of approximately equal positioning errors, initial systematic error estimates are obtained for all arbitrary dual-view combinations. It then identifies and removes outlier images with inconsistent systematic errors via coefficient of variation analysis, retaining a subset of multi-view images with stable calibration parameters. A weighted fusion strategy, tailored to the geometric error propagation model, is applied to the optimized subset to balance the influence of angular relationships on error estimation. Finally, the minimum norm least-squares method refines the fusion results to enhance consistency and accuracy. Validation experiments on both simulated and actual airborne SAR images demonstrate the method’s effectiveness. For actual measured data, the proposed method achieves an average positioning accuracy improvement of 84.78% compared with dual-view fusion methods, with meter-level precision. Ablation studies confirm that outlier removal and refined estimation contribute 82.42% and 22.75% to accuracy gains, respectively. These results indicate that the method fully leverages multi-view information to robustly estimate and compensate for 2D systematic errors (range and azimuth), enabling high-precision planar geolocation of airborne SAR images without GCPs. Full article

The performance of deep learning models largely depends on the scale and quality of training data. However, acquiring sufficient, high-quality samples for specific observation scenarios is often challenging due to high acquisition costs. Unlike optical imagery, synthetic aperture radar (SAR) target images exhibit strong nonlinear scattering variations with changing azimuth angles, making conventional data augmentation methods such as cropping or rotation ineffective. To tackle these challenges, this paper introduces an Azimuth-Continuously Controllable Generative Adversarial Network (ACC-GAN), which incorporates a continuous azimuth conditional variable to achieve precise azimuth-controllable target generation from dual-input SAR images. Our key contributions are threefold: (1) a continuous azimuth control mechanism that enables precise interpolation between arbitrary azimuth angles; (2) a dual-discriminator framework combining similarity and azimuth supervision to ensure both visual realism and angular accuracy; and (3) conditional batch normalization integrated with adaptive feature fusion to maintain scattering consistency. Experiments on the MSTAR dataset demonstrate that ACC-GAN effectively captures nonlinear azimuth-dependent transformations, generating high-quality images that improve downstream classification accuracy and validate its practical value for SAR data augmentation. Full article

To further achieve high-precision localization of lightning radiation sources and clear imaging of lightning plasma channel structures under existing radar systems, this study proposes a lightning localization and imaging method that combines the Electromagnetic Time Reversal (EMTR) algorithm with the Hierarchical Density-Based Spatial Clustering of Applications with Noise (HDBSCAN) algorithm. The EMTR algorithm fully utilizes incoming wave information for localization calculations, enabling the detection of low-energy radiation sources while addressing the vulnerability of traditional methods to complex propagation environments in long-range lightning localization. The HDBSCAN algorithm effectively avoids the need for manual parameter tuning in traditional clustering methods, realizing automated clustering. By applying this combined method to cluster localized radiation source points and remove noise, clear imaging of lightning channel structures is ultimately achieved. Experimental results demonstrate that the proposed method outperforms traditional techniques in localization accuracy, noise robustness, and channel reconstruction performance, providing strong support for further research on the physical properties of lightning. Full article

The ongoing launch of high-resolution satellites has led to a significant increase in the volume of synthetic aperture radar data, resulting in a high-resolution and high-revisit Earth observation that efficiently supports subsequent high-resolution SAR change detection. To address the issues of speckle noise interference, insufficient integrity of change targets and blurred boundary location of high-resolution SAR change detection, we propose a coarse-to-fine framework based on the multi-scale segmentation and hybrid structure graph (HSG), which consists of three modules: multi-scale segmentation, difference measurement, and change refinement. First, we propose a graph-based multi-resolution co-segmentation (GMRCS) in the multi-scale segmentation module to generate hierarchically nested superpixel masks. And, a two-stage ranking (TSR) strategy is designed to help GMRCS better approximate the target edges and preserve the spatio-temporal structure of changed regions. Then, we introduce a graph model and measuring difference level based on the HSG. The multi-scale difference image (DI) is generated by constructing the HSG for bi-temporal SAR images and comparing the consistency of the HSGs to reduce the effect of speckle noise. Finally, the coarse-scale change information is gradually mapped to the fine-scale based on the multi-scale fusion refinement (FR) strategy, and we can get the binary change map (BCM). Experimental results on three high-resolution SAR change detection datasets demonstrates the superiority of our proposed algorithm in preserving the integrity and structural precision of change targets compared with several state-of-the-art methods. Full article

Landslide disasters pose severe threats to mountainous regions, where accurate monitoring and scientific prediction are crucial for early warning and risk mitigation. This study addresses this challenge by focusing on the Outang Landslide, a representative large-scale bank slope in the Three Gorges Reservoir area known for its significant deformation responses to rainfall and reservoir-level fluctuations. The landslide’s behavior, characterized by notable hysteresis and nonlinear trends, poses a significant challenge to accurate prediction. To address this, we derived high-precision time-series deformation data by applying atmosphere-corrected Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) to Sentinel-1A imagery, with validation from GNSS measurements. A systematic analysis was then conducted to uncover the correlation, hysteresis, and spatial heterogeneity between landslide deformation and key influencing variables (rainfall, water level, temperature). Furthermore, we proposed a Spatio-Temporal Enhanced Convolutional Neural Network (STE-CNN), which innovatively converts influencing variables into grayscale images to enhance spatial feature extraction, thereby improving prediction accuracy. The results indicate that: (1) From June 2022 to March 2024, the landslide showed an overall downward displacement trend, with maximum settlement and uplift rates of −49.34 mm/a and 21.77 mm/a, respectively; (2) Deformation exhibited significant correlation, hysteresis, and spatial variability with environmental factors, with dominant variables shifting across seasons—leading to intensified movement in flood seasons and relative stability in dry seasons; (3) The improved STE-CNN outperforms typical prediction models in forecasting landslide deformation.This study presents an integrated methodology that combines InSAR monitoring, multi-factor mechanistic analysis, and deep learning, offering a reliable solution for landslide early warning and risk management. Full article

Ground Penetrating Radar (GPR) is a powerful tool for imaging shallow stratigraphic and structural features. This study shows that it is particularly effective also in detecting near-surface evidence of active faulting. In the Southern Apennines (Italy), one of the most seismically active regions of the Mediterranean area, the shallow expression of active faults is often poorly constrained due to limited or ambiguous surface evidence. Low-frequency GPR profiles were acquired in the Calore River Valley (Campania Region), an area historically affected by large earthquakes and characterized by debated seismogenic sources. The surveys employed multiple antenna frequencies (30, 60, and 80 MHz) and both horizontal and vertical acquisition geometries, enabling penetration depths ranging from ~5 m to ~50 m. The acquired GPR profiles, integrated with high-precision georeferencing, were able to reveal the presence of shallow steeply dipping active normal faults striking E–W to ENE–WSW, here named the Postiglione Fault System. Therefore, this study highlights the methodological potential of low-frequency GPR for investigating active faults in carbonate substratum and fine-to-coarse-grained sedimentary units and thus contributing to refining the seismotectonic framework and improving seismic hazard assessment of seismically active areas such as the Southern Apennines. Full article

Shape anomaly detection of satellites is critical to ensuring their safe operation. With the intrinsic range-Doppler projection mechanism, the inverse synthetic aperture radar (ISAR) image sequence has a high potential for localizing and detecting satellites’ shape anomalies. In this manuscript, we propose a Fully Convolutional Data Description (FCDD) joint temporal sequential classification network to extract both spatial and temporal information for shape anomaly detection of space targets. The explainable FCDD network is initially built to generate explainable heatmaps of anomalies. An attention-based GRU is used to learn context information between heatmap sequences by converting detection into sequential binary classification. In this way, the joint temporal and spatial information extraction proposal can not only detect shape anomalies with high precision and low false alarm rate but also retain the capability of generating explainable heatmaps to localize satellite shape anomaly components. Extensive experimental results confirm the superiority of the proposal. Full article

Accurate monitoring of settlement in high-speed railway embankments is critical for operational safety and long-term serviceability. This study investigates the applicability of Persistent Scatterer Interferometric Synthetic Aperture Radar (PS-InSAR) for quantifying millimeter-scale deformations and emphasizes how surrounding environmental factors influence measurement accuracy. Using 29 TerraSAR-X images acquired between 2016 and 2018, PS-InSAR-derived settlements were compared with precise leveling survey data across twelve representative embankment sections of the Honam High-Speed Railway in South Korea. Temporal and spatial discrepancies between the two datasets were harmonized through preprocessing, allowing robust accuracy assessment using mean absolute error (MAE) and standard deviation (SD). Results demonstrate that PS-InSAR reliably captures settlement trends, with MAE ranging from 1.7 to 4.2 mm across different scenes. However, significant variability in accuracy was observed depending on local land-cover composition. Correlation analysis revealed that vegetation-dominated areas, such as agricultural and forest land, reduce persistent scatterer density and increase measurement variability, whereas high-reflectivity surfaces, including transportation facilities and buildings, enhance measurement stability and precision. These findings confirm that environmental conditions are decisive factors in determining the performance of PS-InSAR. The study highlights the necessity of integrating site-specific land-cover information when designing and interpreting satellite-based monitoring strategies for railway infrastructure management. Full article

Monitoring large-gradient surface displacement caused by underground mining remains a significant challenge for conventional Synthetic Aperture Radar (SAR)-based techniques. This study introduces optical flow methods to monitor large-gradient displacement in mining areas and conducts a comprehensive comparison with Small Baseline Subset Interferometric SAR (SBAS-InSAR) and Pixel Offset Tracking (POT) methods. Using 12 high-resolution TerraSAR-X (TSX) SAR images over the Daliuta mining area in Yulin, China, we evaluate the performance of each method in terms of sensitivity to displacement gradients, computational efficiency, and monitoring accuracy. Results indicate that SBAS-InSAR is only capable of detecting displacement at the decimeter level in the Dalinta mining area and is unable to monitor rapid, large-gradient displacement exceeding the meter scale. While POT can detect meter-scale displacements, it suffers from low efficiency and low precision. In contrast, the proposed optical flow method (OFM) achieves sub-pixel accuracy with root mean square errors of 0.17 m (compared to 0.26 m for POT) when validated against Global Navigation Satellite System (GNSS) data while improving computational efficiency by nearly 30 times compared to POT. Furthermore, based on the optical flow results, mining parameters and three-dimensional (3D) displacement fields were successfully inverted, revealing maximum vertical subsidence exceeding 4.4 m and horizontal displacement over 1.5 m. These findings demonstrate that the OFM is a reliable and efficient tool for large-gradient displacement monitoring in mining areas, offering valuable support for hazard assessment and mining management. Full article