Search Results (11,001)

We aimed to establish a rapid and precise method for identifying and quantifying multi-species vegetable oil (corn oil, olive oil (OLO), soybean oil, and sunflower oil (SUO)) adulterations in camellia oil (CAO), using soft ionization by chemical reaction in transfer–high-resolution mass spectrometry (SICRIT-HRMS) and machine learning methods. The results showed that SICRIT-HRMS could effectively characterize the volatile profiles of pure and adulterated CAO samples, including binary, ternary, quaternary, and quinary adulteration systems. The low m/z region (especially 100–300) exhibited importance to oil classification in multiple feature-selection methods. For qualitative detection, binary classification models based on convolutional neural networks (CNN), Random Forest (RF), and gradient boosting trees (GBT) algorithms showed high accuracies (98.70–100.00%) for identifying CAO adulteration under no dimensionality reduction (NON), principal component analysis (PCA), and uniform manifold approximation and projection (UMAP) strategies. The RF algorithm exhibited relatively high accuracy (96.25–99.45%) in multiclass classification. Moreover, the five models, including CNN, RF, support vector machines (SVM), logistic regression (LR), and GBT, exhibited different performances in distinguishing pure and adulterated CAO. Among 1093 blind oil samples, under NON, PCA, and UMAP: 10, 5, and 67 samples were misclassified by CNN model; 6, 7, and 41 samples were misclassified by RF model; 8, 9, and 82 samples were misclassified by SVM model; 17, 18, and 78 samples were misclassified by LR model; 7, 9, and 43 samples were misclassified by GBT model. For quantitative prediction, the PCA-CNN model performed optimally in predicting adulteration levels in CAO, especially with respect to OLO and SUO, exhibiting a high coefficient of determination for calibration ($R_C^2$, 0.9664–0.9974) and coefficient of determination for prediction ($R_p^2$, 0.9599–0.9963) values, low root mean square error of calibration (RMSEC, 0.9–5.3%) and root mean square error of prediction (RMSEP, 1.1–5.8%) values, and RPD (5.0–16.3) values greater than 3.0. These results indicate that SICRIT-HRMS combined with machine learning can rapidly and accurately identify and quantify multi-species vegetable oil adulterations in CAO, which provides a reference for developing non-targeted and high-throughput detection methods in edible oil authenticity. Full article

The collision dynamics of binary seawater droplets are pivotal in marine engineering applications, like spray desalination and engine cooling. While high-fidelity simulations can resolve these dynamics, they are computationally prohibitive for rapid design and analysis. This study introduces the first interpretable machine learning (ML) framework to predict and elucidate the collision outcomes of head-on binary seawater droplets. A high-fidelity numerical dataset, generated via Modified Coupled Level Set-VOF (M-CLSVOF) simulations across a broad Weber number (We) range, serves as the foundation for training multiple classifiers. Among the tested algorithms, the Random Forest model achieved superior performance with 96.2% accuracy. The model’s predictions precisely identified the critical Weber number for the transition from coalescence to reflexive separation at We ≈ 22.3 for seawater. Moving beyond black-box prediction, we employed SHapley Additive exPlanations (SHAP) to quantitatively deconstruct the model’s decision-making process. SHAP analysis confirmed the dominance of the Weber number (75% contribution) and revealed the context-dependent role of the Reynolds number (25% contribution) in modulating the collision outcome. Furthermore, a comparative analysis with freshwater droplets quantified a 6% elevation in the critical Weber number for seawater, attributed to salinity-induced modifications in fluid properties. Finally, a machine-learned regime map in the We-Ohnesorge space was constructed, delineating the coalescence and separation boundaries. This work establishes ML as a powerful, interpretable surrogate model that not only delivers rapid, accurate predictions but also extracts fundamental physical insights, offering a valuable paradigm for optimizing marine spray systems. Full article

Background/Objectives: In the modern healthcare landscape, breast cancer remains one of the most prevalent malignancies and a leading cause of mortality among women worldwide. Early and accurate prediction of breast cancer plays a pivotal role in effective diagnosis, treatment planning, and improving survival outcomes. However, due to the complexity and heterogeneity of medical data, achieving high predictive accuracy remains a significant challenge. This study proposes an intelligent hybrid system that integrates traditional machine learning (ML), deep learning (DL), and ensemble learning approaches for enhanced breast cancer prediction using the Wisconsin Breast Cancer Dataset. Methods: The proposed system employs a multistage framework comprising three main phases: (1) data preprocessing and balancing, which involves normalization using the min–max technique and application of the Synthetic Minority Over-sampling Technique (SMOTE) to mitigate class imbalance; (2) model development, where multiple ML algorithms, DL architectures, and a novel ensemble model are applied to the preprocessed data; and (3) model evaluation and validation, performed under three distinct training–testing scenarios to ensure robustness and generalizability. Model performance was assessed using six statistical evaluation metrics—accuracy, precision, recall, F1-score, specificity, and AUC—alongside graphical analyses and rigorous statistical tests to evaluate predictive consistency. Results: The findings demonstrate that the proposed ensemble model significantly outperforms individual machine learning and deep learning models in terms of predictive accuracy, stability, and reliability. A comparative analysis also reveals that the ensemble system surpasses several state-of-the-art methods reported in the literature. Conclusions: The proposed intelligent hybrid system offers a promising, multidisciplinary approach for improving diagnostic decision support in breast cancer prediction. By integrating advanced data preprocessing, machine learning, and deep learning paradigms within a unified ensemble framework, this study contributes to the broader goals of precision oncology and AI-driven healthcare, aligning with global efforts to enhance early cancer detection and personalized medical care. Full article

This paper analyzes different approaches for the mathematical modeling and optimization of process parameters in the hard turning process of 42CrMo4 steel using a hybrid approach combining response surface methodology (RSM), multi-criteria decision making (MCDM), and machine learning through, support vector regression (SVR) with one-factor-at-a-time (OFAT) sensitivity analysis. Controlled process parameters such as cutting speed, depth of cut, feed, and insert radius are applied to conduct the experiments based on a full factorial experimental design. RSM was used to develop models that describe the effect of controlled parameters on surface roughness and cutting forces. Special emphasis was placed on the analysis of standardized residuals to evaluate the predictive capabilities of the RSM-developed model on an unseen data set. For all four outputs considered, analysis of the standardized residuals shows that over 97% of the points lie within ±3 standard deviations. A multi-criteria optimization technique was applied to establish an optimal combination of input parameters. The SVR model had high performance for all outputs, with coefficient of determination values between 89.91% and 99.39%, except for surface roughness on the test set, with a value of 9.92%. While the SVR model achieved high predictive accuracy for cutting forces, its limited generalization capability for surface roughness highlights the higher complexity and stochastic nature of surface formation mechanisms in the turning process. OFAT analysis showed that feed rate and depth of cut have been shown to be the most important input variables for all analyzed outputs. Full article

Background and Objectives: Posthepatectomy liver failure (PHLF) remains a major cause of morbidity and mortality for patients undergoing major liver resections. Recent research highlights the expanding role of machine learning (ML), a crucial subfield of artificial intelligence (AI), in optimizing risk stratification. The aim of the current study was to review, elaborate on and critically analyze the available literature regarding the use of ML-driven risk prediction models for posthepatectomy liver failure. Materials and Methods: A systematic search was conducted in the PubMed/MEDLINE, Scopus and Web of Science databases. Fifteen studies that trained and validated ML models for prediction of PHLF were further included and analyzed. Results: The available literature supports the value of ML-derived models for PHLF prediction. Perioperative clinical, laboratory and imaging features have been combined in a variety of different algorithms to provided interpretable and accurate models for identifying patients at risk of PHLF. The ML-based algorithms have consistently demonstrated high area under the curve and sensitivity values, surpassing traditionally used risk scores in predictive performance. Limitations include the small sample sizes, heterogeneity in populations included, lack of external validation and a reported poor ability to distinguish between true positive and false positive cases in several studies. Conclusions: Despite the constraints, ML-driven tools, in combination with traditional scoring systems and clinical insight, may enable early and accurate PHLF risk detection, personalized surgical planning and optimization of postoperative outcomes in liver surgery. Full article

Modern power transmission systems are required to meet increasingly stringent demands, including a wide range of transmission ratios, compact dimensions, high precision, energy efficiency, reliability, and thermal stability under dynamic operating conditions. Among the solutions that satisfy these requirements, cycloidal reducers are particularly prominent, with their application continuously expanding in industrial robotics, computer numerical control (CNC) machines, and military and transportation systems, as well as in the satellite industry. However, as with all mechanical power transmissions, friction in the contact zones of load-carrying elements in cycloidal reducers leads to power losses and an increase in operating temperature, which in turn results in a range of adverse effects. These undesirable phenomena strongly depend on lubrication conditions, namely on the type and properties of the applied lubricant. Although manufacturers’ catalogs provide general recommendations for lubricant selection, they do not address the fundamental tribological mechanisms in the most heavily loaded contact pairs. At the same time, the available scientific literature reveals a significant lack of systematic and experimentally validated studies examining the influence of lubricant type on the energetic and thermal performance of cycloidal reducers. To address this identified research gap, this study presents an analytical and experimental investigation of the effects of different lubricant types—primarily greases and mineral oils—on the thermal stability and efficiency of cycloidal reducers. The results demonstrate that grease lubrication provides lower total power losses and a more stable thermal operating regime compared to oil lubrication, while oil film thickness analyses indicate that the most unfavorable lubrication conditions occur in the contact between the eccentric bearing rollers and the outer raceway. These findings provide valuable guidelines for engineers involved in cycloidal reducer design and lubricant selection under specific operating conditions, as well as deeper insight into the lubricant behavior mechanisms within critical contact zones. Full article

Orchard wind-assisted spraying technology relies on auxiliary airflow to disturb the canopy and improve droplet deposition uniformity. However, there are few effective means of quantitatively assessing the dynamic response of fruit tree leaves to airflow or the changes in airflow patterns within the canopy in real time. To address this, this study proposed an online monitoring method for the aerodynamic characteristics of fruit tree leaves using strain gauge sensors. The flexible strain gauge was affixed to the midribs of leaves from peach, pear and apple trees. Leaf deformations were captured with high-speed video recording (100 fps) alongside electrical signals in controlled wind fields. Bartlett low-pass filtering and Fourier transform were used to extract frequency-domain features spanning between 0 and 50 Hz. The AdaBoost decision tree model was used to evaluate classification performance across frequency bands. The results demonstrated high accuracy in identifying wind exposure (98%) for pear leaf and classifying the three leaf types (κ = 0.98) within the 4–6 Hz band. A comparison with the frame analysis of high-speed video recordings revealed a time error of 2 s in model predictions. This study confirms that strain gauge sensors combined with machine learning could efficiently monitor fruit tree leaf responses to external airflow in real time. It provides novel insights for optimizing wind-assisted spray parameters, reconstructing internal canopy wind field distributions and achieving precise pesticide application. Full article

The grinding process of bearing components is a critical step in their manufacturing, as it directly impacts the functional properties of raceways and other critical surfaces. One important failure that arises during the grinding process is the appearance of waviness in the machined surface. This geometrical defect causes vibrations in operation with a consequent impact on power losses, noise and fatigue. The present work proposes an in-line detection system of waviness defects in bearing raceways. For this, the system uses accelerometers installed near the machined part and runs a detection algorithm in a local calculation unit. The results are sent over Ethernet to the central quality control of the line. The embedded algorithm uses the frequency content of the measured signal for predicting the surface quality of the final part. The prediction is performed by learning a non-parametric model describing the correspondence between the surface geometry and the measured vibration content. In order to obtain this model, a calibration process is conducted for each bearing reference, ensuring that the model accounts for the specific geometric and operational characteristics of the parts. By analyzing the correlation between accelerometer signals and harmonics, the algorithm predicts the probability of waviness occurrence. The proposed system has been implemented in a high-precision bearing production line, validating its effectiveness with multiple parts of the same reference. This approach identifies waviness during the machining process without the need for offline tests. This fact represents an improvement in the detection of defects, and it provides higher product quality and reduced operational costs. Full article

The increasing urgency to mitigate plastic pollution has accelerated the shift from linear manufacturing toward circular systems. This review synthesizes current advances in mechanical, chemical, biological, and upcycling pathways, emphasizing how artificial intelligence (AI) is reshaping decision-making, performance prediction, and system-level optimization. Intelligent sensing technologies—such as FTIR, Raman spectroscopy, hyperspectral imaging, and LIBS—combined with Machine Learning (ML) classifiers have improved material identification, reduced reject rates, and enhanced sorting precision. AI-assisted kinetic modeling, catalyst performance prediction, and enzyme design tools have improved process intensification for pyrolysis, solvolysis, depolymerization, and biocatalysis. Life Cycle Assessment (LCA)-integrated datasets reveal that environmental benefits depend strongly on functional-unit selection, energy decarbonization, and substitution factors rather than mass-based comparisons alone. Case studies across Europe, Latin America, and Asia show that digital traceability, Extended Producer Responsibility (EPR), and full-system costing are pivotal to robust circular outcomes. Upcycling strategies increasingly generate high-value materials and composites, supported by digital twins and surrogate models. Collectively, evidence indicates that AI moves from supportive instrumentation to a structural enabler of transparency, performance assurance, and predictive environmental planning. The convergence of AI-based design, standardized LCA frameworks, and inclusive governance emerges as a necessary foundation for scaling circular plastic systems sustainably. Full article

Background: Artificial intelligence (AI) and machine learning (ML) are increasingly used in the diagnosis and management of bone metastases, spanning lesion detection, segmentation, prognostic modeling, fracture risk assessment, and surgical decision support. However, the literature is heterogeneous and rapidly evolving, making it difficult for clinicians to contextualize these developments. Methods: We performed a narrative review of the literature on AI/ML applications in bone metastasis management, focusing on studies that address clinically relevant problems such as detection and segmentation of metastatic lesions, prediction of skeletal-related events and survival, and support for reconstructive decision-making. We prioritized recent, peer-reviewed work that reports model performance and highlights opportunities for clinical translation. Results: Most published studies center on imaging-based diagnosis and lesion segmentation using radiomics and deep learning, with generally high internal performance but limited external validation. Emerging work explores prognostic models and biomechanically informed fracture risk estimation, yet these remain at an early proof-of-concept stage. Very few frameworks are integrated into routine workflows, and explainability, bias mitigation, and health-economic impacts are rarely evaluated. Conclusions: AI and ML tools have substantial potential to standardize imaging assessment, refine risk stratification, and ultimately support personalized management of bone metastases. Future research should focus on externally validated, multimodal models; development of AI-augmented alternatives to the Mirels score; federated multicenter collaboration; and routine incorporation of explainability and cost-effectiveness analyses. Full article

In order to achieve better accuracy, modern models have become increasingly large, leading to an exponential increase in computational load, making it challenging to apply them to edge computing. Binary neural networks (BNNs) are models that quantize the filter weights and activations to 1-bit. These models are highly suitable for small chips like advanced RISC machines (ARMs), field-programmable gate arrays (FPGAs), application-specific integrated circuits (ASICs), system-on-chips (SoCs) and other edge computing devices. To design a model that is more friendly to edge computing devices, it is crucial to reduce the floating-point operations (FLOPs). Batch normalization (BN) is an essential tool for binary neural networks; however, when convolution layers are quantized to 1-bit, the floating-point computation cost of BN layers becomes significantly high. This paper aims to reduce the floating-point operations by removing the BN layers from the model and introducing the scaled weight standardization convolution (WS-Conv) method to avoid the significant accuracy drop caused by the absence of BN layers, and to enhance the model performance through a series of optimizations, adaptive gradient clipping (AGC) and knowledge distillation (KD). Specifically, our model maintains a competitive computational cost and accuracy, even without BN layers. Furthermore, by incorporating a series of training methods, the model’s accuracy on CIFAR-100 is 0.6% higher than the baseline model, fractional activation BNN (FracBNN), while the total computational load is only 46% of the baseline model. With unchanged binary operations (BOPs), the FLOPs are reduced to nearly zero, making it more suitable for embedded platforms like FPGAs or other edge computers. Full article

This study investigates the dynamic behaviors of re-entrant unit-cell-shaped steel frames through numerical and experimental modal analyses. Inspired by re-entrant honeycomb structures, individual frame units were modeled to explore how natural frequencies vary with beam cross-sectional dimensions and frame angles. Twenty distinct frame models—incorporating four cross-sectional sizes (4 × 4 mm, 8 × 8 mm, 12 × 12 mm, and 16 × 16 mm) and five main frame angles (120°, 150°, 180°, 210°, and 240°)—were developed using 3D modeling and finite element analysis (FEA) tools, and the first eight natural frequencies and corresponding mode shapes were extracted for each model. The results reveal that lower modes exhibit global bending and torsional behaviors, whereas higher modes demonstrate increasingly localized deformations. It is found that the natural frequencies decrease in the straight frame configuration and increase in the hexagonal configurations, highlighting the critical influence of the frame geometry. Increasing the cross-sectional size consistently enhances the dynamic stiffness, particularly in hexagonal frames. A quadratic polynomial surface regression analysis was performed to model the relationship of the natural frequency with the cross-sectional dimension and frame angle, achieving high predictive accuracy (R² > 0.98). The experimental validation results were in good agreement with the numerical results, with discrepancies generally remaining below 7%. The developed regression model provides an efficient design tool for predicting vibrational behaviors and optimizing frame configurations without extensive simulations; furthermore, experimental modal analyses validated the numerical results, confirming the effectiveness of the model. Overall, this study provides a comprehensive understanding of the dynamic characteristics of re-entrant frame structures and proposes practical design strategies for improving vibrational performance, which is particularly relevant in applications such as machine foundations, vibration isolation systems, and aerospace structures. Full article

Electric Discharge Machining (EDM) is a well-established process for fabricating complex geometries from hard materials. However, identifying the influence of process parameters remains challenging and costly due to the stochastic nature of EDM and the expense of experimental validation. Machine Learning (ML) techniques provide an alternative to mitigate these limitations by enabling predictive modeling with reduced experimental effort. This research proposes a generalizable framework employing four ML models to analyze the correlation between EDM inputs and outputs, incorporating 11 levels of cryogenic electrode treatment. Independent variables include electrode material, cryogenic conditions, pulse current, and pulse duration, while performance is assessed through Material Removal Rate (MRR) and Electrode Wear Rate (EWR). The results demonstrate that Random Forest (RF) and Artificial Neural Networks (ANNs) achieve superior predictive performance compared to alternative approaches, improving the $R^2$ metric from 0.973 to 0.9956 for EWR in the case of an ANN and from 0.980 to 0.9943 for RF with MRR, compared with previous work in the literature and the best methods across 30 executions. Both models consistently yield high predictive accuracy, with $R^2$ values ranging from 0.9936 to 0.9979 in training and testing datasets. Furthermore, ANN significantly reduces mean squared error, decreasing EWR prediction error from 5.79 to 0.68 and MRR error from 122.75 to 35.89. This research contributes to a deeper understanding of EDM process dynamics. Full article

Artificial Intelligence (AI) is a computer science that focuses on developing systems and machines capable of performing tasks that typically require human cognitive abilities. It has widespread applications in medical diagnostics. Its use has led to rapid advancements in diagnostic methodology, enabling the analysis of large datasets. The major applications of AI in medical diagnostics include personalized treatment based on patient genetics, preventive measures, and medical image analysis. AI is employed to analyse genomic data and biomarkers, aiding in the precise tailoring of therapies to individual patient needs. It could also be employed in modern dentistry in the near future, helping to achieve higher efficiency and accuracy in diagnosis and treatment planning. AI may be utilized in screening for oral mucosa lesions and to discriminate between oral potentially malignant disorders and cancers from benign lesions. The potential advantages of AI include high speed and accuracy in the diagnostic process, as well as relatively low costs. The aim of this review was to present the potential applications of AI methods in the diagnosis of selected mucocutaneous diseases. A literature review focuses on oral lichen planus, recurrent aphthous stomatitis, and oral and laryngeal leukoplakia. Full article

The cosmetic industry is undergoing a deep transformation driven by rapid innovation, evolving consumer expectations, and increasing demands for sustainability. Formulators are required to design products that combine functional efficacy, stability, and appealing sensory properties while adopting environmentally responsible strategies. Traditional empirical and sensory-based approaches, though valuable, are often limited by high costs, time, subjectivity and lack of reproducibility. In this context, instrumental techniques provide an objective and predictive means to optimize product performance. Rheology, texture analysis, and tribology offer complementary insights into the structure, mechanical behavior, and interfacial phenomena of cosmetic formulations, all of which are closely linked to application behavior and sensory perception. Their integration enables a quantitative correlation between formulation composition, process conditions, and tactile performance. This review critically examines recent advances in the integrated use of rheology, texture analysis and tribology in cosmetic science, highlighting their role in sensory prediction, stability assessment, scale-up and eco-design. Together, these instrumental approaches support a more data-driven and innovation-oriented formulation paradigm, enabling database development and predictive modeling. Future research should prioritize database expansion, in vivo validation and machine learning integration to further improve sensory prediction and accelerate the design of advanced cosmetic formulations. Full article