Search Results (2,602)

Earth–Air Heat Exchangers (EAHEs) exploit stable subsurface temperatures to pre-condition supply air. To address limitations of conventional systems in hot–arid climates, this study investigates the performance of a hybrid EAHE prototype combining a serpentine subsurface pipe with a buried water tank. Installed in a residential building in Lichana, Biskra (Algeria), the system was designed to enhance land compactness, thermal stability, and soil–water heat harvesting. Experimental monitoring was conducted across 13 intervals strategically spanning seasonal transitions and extremes and was complemented by calibrated numerical simulations. From over 30,000 data points, outlet trajectories, thermal efficiency, Coefficient of Performance (COP), and energy savings were assessed against a straight-pipe baseline. Results showed that the hybrid EAHE delivered smoother outlet profiles under moderate gradients while the baseline achieved larger instantaneous ΔT. Thermal efficiencies exceeded 90% during high-gradient episodes and averaged above 70% annually. COP values scaled with the inlet–soil gradient, ranging from 1.5 to 4.0. Cumulative recovered energy reached 80.6 kWh (3.92 kWh/day), while the heat pump electricity referred to a temperature-dependent ASHP totaled 34.59 kWh (1.40 kWh/day). Accounting for the EAHE fan yields a net saving of 25.46 kWh across the campaign, only one interval (5) was net-negative, underscoring the value of bypass/fan shut-off under weak gradients. Overall, the hybrid EAHE emerges as a footprint-efficient option for arid housing, provided operation is dynamically controlled. Future work will focus on controlling logic and soil–moisture interactions to maximize net performance. Full article

Rising global temperatures are driving an urgent need for buildings that consume less energy while maintaining comfort. Cooling demand is surging worldwide, yet conventional air-conditioning remains energy-intensive and carbon-heavy. Against this backdrop, radiative cooling materials have gained attention as a passive solution capable of reflecting incoming solar radiation while emitting thermal energy to the sky. This study aims to establish a climate-informed framework that quantitatively predicts the energy-saving potential of façade-integrated radiative-cooling materials across diverse East Asian climates. By synergizing hour-by-hour building-energy simulation with three novel atmospheric suitability indices, we provide a transferable methodology for selecting and optimizing passive cooling strategies at urban and regional scales. Three façade configurations were tested, i.e., a conventional absorptive surface, a common radiative cooling surface, and an idealized high-reflectance and high-emissivity surface. The results show that the ideal case can reduce wall surface temperatures by up to 20 °C, suppress diurnal heat flux swings by 60–80%, and cut annual cooling demand by 5–80 kWh per square meter, depending on climate conditions. To generalize these findings, three new indices—the Weather Structure Index, Diurnal Temperature Index, and Composite Climate Applicability—were proposed. Regression models with R² values above 0.9 confirm the Composite Climate Applicability index as a robust predictor of energy-saving potential. The outcomes demonstrate that radiative cooling is not only highly effective in hot, humid regions but also unexpectedly beneficial in clear, cold climates, offering a practical, climate-informed framework for advancing low-carbon building design. Full article

The building sector accounts for nearly 40% of global energy consumption and over one-third of energy-related carbon emissions. Therefore, it is vital to adopt low-carbon design strategies. Double-Skin Façades (DSFs) offer significant potential to improve energy efficiency through the dynamic control of heat and daylight. This study evaluates the combined effects of building orientation, fixed shading devices, and adjustable blinds on the performance of DSFs across six cities representing diverse climate types: Phoenix, Stockholm, Kuala Lumpur, London, Cape Town, and Tokyo. Using a model developed in DesignBuilder, 852 scenarios were simulated with 5-min time steps over a full year. The results show that optimal orientation depends on the climate and that cooling load may be reduced up to 59%, with CO₂ emission savings up to 11.7% compared to a base south-facing configuration. External blinds outperformed internal blinds in reducing the cooling demand, reaching reductions of up to 27.7% in hot climates, though often increasing the heating load in cold climates. Combining overhangs and external blinds provided additional cooling savings in some cases but was generally less effective than external blinds alone. The findings highlight the importance of climate-specific DSF designs, with orientation and external blinds being the most effective strategies for reducing operational energy use and emissions. Full article

The energy-saving performance of the building envelope, which plays a pivotal role in energy conservation and thermal insulation, has been the subject of extensive research. In the context of China’s high-quality green development, this study proposes a building energy-saving strategy based on optimal thermal comfort. It analyzes the impact of factors such as regional dwell time and PMV types on energy-saving effects, summarizes the optimal comfort parameters under the highest energy efficiency rate, and sets relevant parameters in the DeST building energy simulation software to analyze a typical public building. The analysis examined the impact of changing the heat transfer coefficients of exterior walls and windows on the annual cumulative heating and cooling loads. It established the relationship between the thermal transmittance of building envelopes and energy consumption and assessed the carbon emissions during the building’s operation and maintenance phase. The results indicate that as building envelope thermal transmittance coefficient decreases, particularly that of external windows and walls, overall cumulative heating and cooling loads decline accordingly. Notably, the reduction in external windows’ thermal transmittance coefficient has the most significant impact on total building thermal load. Furthermore, as the envelope thermal transmittance coefficient decreases, seasonal heating and cooling demands decline simultaneously, with the most substantial effect on heating load reduction during winter. Total annual building carbon emissions also decrease with the reduction in envelope thermal transmittance coefficient, particularly external wall thermal transmittance coefficient. Based on the findings of this study, the building envelope of the public building was redesigned, taking into account construction costs, the owner’s requirements, and energy efficiency alongside the reduction in carbon emissions. Comparisons of the redesigned building’s envelope thermal performance, experimental testing, and in situ measurements confirmed that it fulfilled the engineering requirements. This study also demonstrates that DeST software provides reliable technological support for low-carbon building design, retrofitting, and operation. Full article

Emissions reduction and energy saving at thermal power plants are crucial for energy development. This paper presents the results of thermodynamic analysis and optimization of thermal circuits of combined-cycle power plants incorporating an organic Rankine cycle and supplementary burners. It is established that at a power unit with GTE-170, the transition from a binary cycle with a double-circuit waste heat boiler to a trinary one leads to an increase in net efficiency by 0.79%. It is established that in the trinary cycle, fuel afterburning in the exhaust-gas environment leads to an increase in the net capacity of the power plant: the increase is up to 4.1% with an increase in the degree of afterburning by 0.1 at a steam temperature of 515 °C. It was revealed that the introduction of intermediate superheat provides an increase in the efficiency of the binary cycle by an average of 0.2–3%, and of the trinary cycle by 2–4%, with a change in the degree of afterburning from 0 to 0.5 at an initial steam temperature of 515 °C. The use of supplementary combustion and the organic Rankine cycle make it possible to reduce carbon dioxide emissions in combined-cycle power plants. Compared to a single-pressure combined cycle, the ORC-integrated configuration reduces specific CO₂ emissions by more than 7.5%, while supplementary fuel combustion with an increased steam inlet temperature results in a reduction of up to 10%. Full article

Sustainable building heat recovery ventilation is a key factor in modern structural design and production, which can be achieved by the combination of cutting-edge, energy-economical technologies, such as counter flow flat-plats, heat pipes and simple design arrangements like a light well. To achieve low energy use and good indoor air quality, natural ventilation should be applied as often as possible. In this article, an energy simulation study is presented, which is focused on an in-built natural ventilation system of an existing vacant office building. It has been demonstrated that a substantial amount of energy can be saved by utilizing natural ventilation in a building, while it was also proven that obsolete buildings can be energy-efficiently operated, without the need for demolition, if they are cautiously re-designed. Full article

This study evaluates indoor thermal comfort and the energy performance of HVAC control strategies in the Congo Zone of a zoological facility located in Poland. The main objective in this zone is to maintain adequate relative humidity, which is more critical for plants and animals than the indoor air temperature range. Long-term measurements were carried out to determine the variation of air system heat transfer as a function of outdoor air temperature. To determine the energy demand for heating, cooling, and air transport, eight control algorithms were analysed, each differing in a single detail but potentially affecting overall energy use and thermal comfort. The algorithms combined the following features: maintaining a constant supply or indoor air temperature; operating with a constant or modulated recirculation damper position; maintaining a constant or variable airflow (CAV or VAV); operating within the normal setpoint range or with an extended range of 1 °C; controlling temperature only or both temperature and humidity; and utilising or not utilising free cooling. The control algorithm operating in the facility maintained indoor humidity within acceptable limits for 98% of the year but failed to meet temperature requirements for 28% of the time. Refined strategies achieved energy savings of up to 74% in fan power and 80% in cooling demand, though often at the cost of reduced humidity control. Full article

In this manuscript, an analysis of the prospect of using a direct-contact air, gravel, ground heat exchanger (GAHE)—patented and tested at the Wroclaw University of Science and Technology—as a simple and inexpensive way of improving microclimate parameters in horse stables using renewable energy was presented. Different options for introducing a GAHE into the typical HVAC system have been proposed and examined. Using the GAHE calculation model developed based on the research, computer simulations of the GAHE’s interaction with the ventilation system were conducted. The effects of GAHE interaction were compared with a typical solution that does not utilise ground renewable energy. The analyses demonstrate year-round changes in microclimate parameters, particularly in the air temperature, relative humidity, and the THI comfort index. The benefits of using a GAHE as a component that improves comfort for animals and employees, while simultaneously saving energy, were demonstrated. The use of measurement data and computer energy simulations demonstrates the engineering feasibility of including GAHEs in a mechanical ventilation system for a horse stable. The obtained results indicate the potential for improving animal husbandry and employee working conditions without the need to consume additional energy to operate complex HVAC systems. Full article

With more hybrid heating systems available, there is a need to optimize energy use intelligently from the end-consumer perspective. This paper focuses on a multi-criteria heating system optimization to optimize cost, carbon emission, and comfort level of building occupants. A discrete Multi-Objective Model Predictive Controller (MO-MPC) algorithm is proposed to optimally utilize two heating sources connected to a building, namely district heating (DH) and a building-integrated electrical heat pump (HP). The model is tested on a real-world building case simulated with a gray box building model. The results are compared to a conventional PID controller as well as the MPC scheme, each with a single heating input, and eight different cases are constructed to make this comparison more visible. The results indicate that, using MO-MPC, a cost saving of up to 10% and emission saving of up to 13% can be reached without additional thermal discomfort, while the potential savings on cost and emission with the hybrid system can be up to 25% and 77%, respectively. Further, a sensitivity analysis on price and emission parameters is conducted to investigate the changes in the provided solution. Full article

The escalating demand for sustainable development in the built environment necessitates the integration of innovative, system-based assessment tools. This study investigates the role of energy efficiency (EE) within a nature-inspired sustainability assessment framework, drawing from biomimicry principles to evaluate green building practices in South Africa. Grounded in the ethos of nature’s efficiency, such as closed-loop energy systems, passive energy use, efficiency through form and function, and decentralised and localised energy generation, this study identifies and prioritises key EE criteria, including efficient energy management, renewable energy optimisation, passive heating, ventilation and air conditioning (HVAC) systems, and energy-saving technologies. Using the Analytic Hierarchy Process (AHP), this research engaged 38 highly experienced, practising, and registered construction professionals to perform pairwise comparisons of EE criteria. Results revealed that efficient energy management (29.8%) emerged as the most significant factor, followed closely by energy-saving equipment (26.4%), with strong expert consensus (consistency ratio = 0.03). The findings reflect a convergence of ecological wisdom and industry expertise, suggesting that nature’s design strategies offer a compelling roadmap for achieving sustainable energy performance in buildings. This study reinforces the applicability of biomimicry in shaping context-specific sustainability metrics and informs the development of adaptive, ecologically aligned certification frameworks. This study recommends the integration of these EE criteria into building rating systems, fostering interdisciplinary collaboration, and scaling nature-based frameworks to inform global sustainability practice. By bridging theory and application, this study advances a regenerative approach to construction that aligns with the UN Sustainable Development Goals and long-term environmental resilience. Full article

To reduce emissions in the existing transportation system and lower carbon dioxide (CO₂) output, battery electric vehicles (BEVs) offer a promising approach due to their higher energy efficiency. However, their driving range still falls short compared to conventional vehicles. Optimizing the heating, ventilation, and air conditioning (HVAC) system can help save energy and improve passenger comfort. This study investigates an advanced thermal management system for an electric truck cabin with heating panels and added insulation. A one-dimensional (1D) cabin thermal model was also developed and validated with experimental data. The model integrates insulation, heating panels, and a 1D comfort simulation. It is functional mock-up unit (FMU) compatible and connects to larger system simulations and real-time applications. The results show that energy consumption can be reduced by up to 50% with these thermal measures. In the future, further research and new approaches will be necessary to identify even more efficient subsystems and cost-effective solutions. Full article

The reduction in energy use in buildings remains a major challenge. In the European Union, buildings account for approximately 40% of the total energy consumption, with sports facilities alone responsible for around 10% of annual use. These facilities are characterised by specific indoor environmental requirements, and ice rink arenas, in particular, represent substantial energy consumers due to the demands of ventilation and dehumidification processes. This paper investigates strategies for maintaining adequate air parameters in an ice rink arena, based on an experimentally verified numerical model of the facility. The research focused on: (1) assessing the energy consumption of different ventilation and air distribution system configurations, and (2) evaluating potential reductions achievable through the implementation of recirculation, heat recovery, and various air handling unit (AHU) configurations, while ensuring appropriate thermal and humidity conditions within the arena. Multi-variant simulations of AHU energy consumption were performed in IDA ICE 4.8 software for both day and night operation over the entire ice rink season. The results showed that the choice and operation of AHU configurations significantly influenced energy consumption as well as the thermal–humidity conditions of the facility, with annual savings of up to 67%. Full article

As the importance of energy efficiency and smart readiness in the building sector has been on the rise, the financial evaluation of smart-ready technologies (SRTs) remains a gap in this field. This study introduces a methodology that comparatively evaluates the cost–benefit relationship between 11 different SRTs across three European countries—Cyprus, Italy and The Netherlands. Key performance indicators (KPIs) for energy-focused aspects such as Country-Specific Energy Savings Potential (CSESP) and Seasonal Smart Efficiency Coefficient (SSEC) and financial aspects such as Smart Readiness Cost Index (SRCI), Labor Cost Impact Factor (LCIF), Return on Smart Investment (RoSI), and Smart Investment Break-Even Period (SIBEP) were used to quantify the performance of the SRTs. The results indicate that regional labor rates, energy pricing, and climatic conditions—as well as relative technology cost–benefit tradeoffs—play a significant role in the economic viability of smart-ready devices. Having low labor costs and energy pricing, Cyprus exhibited the most cost-effective outcomes among the three countries. Italy showed strong returns although the initial investments were higher. The Netherlands was observed to benefit the most from heating-oriented technologies. The study comes to the conclusion that regionally specific methods are necessary for the adoption of SRTs and that techno-economic performance cannot be assessed separately from local market dynamics. The proposed framework supports stakeholders and policymakers in smart building investment and planning by offering a scalable method for device-level benchmarking. These indicators are developed specifically for this study and are not part of the official EU SRI (Smart Readiness Indicator) methodology. Their inclusion supports device-level evaluation and complements ongoing efforts toward SRI standardization. This research directly addresses Sustainable Development Goal (SDG) 7 on Affordable and Clean Energy, as well as SDG 11 on Sustainable Development, by evaluating how smart-ready technologies can contribute to energy efficiency and decarbonization in buildings. Based on the results, further research is needed to expand the indicator framework to additional technologies, include building typology effects, and integrate dynamic factors such as CO₂ pricing and real-time tariffs. Full article

Airplane cabin temperature is a critical environmental factor governing the safety and reliability of airborne equipment. Compared with measuring temperature, predicting temperature is more cost- and time-saving and can cover an extreme flight envelope. Physics-informed neural networks (PINNs) offer a promising prediction solution whose performance hinges on the availability of precise governing differential equations. However, building governing differential equations between flight parameters and cabin temperature is a great challenge, as it is comprehensively influenced by aerodynamic heat, avionic heat, and internal flow. To solve this, a new PINN framework based on “a priori monotonicity” is proposed. Underlying physical trends (monotonicity) from flight data are extracted to construct the loss function as a data-driven constraint, thus eliminating the need for any governing equations. The new PINN is developed to estimate the seven cabin temperatures of an unmanned aerial vehicle. The model was trained on data from four flight sorties and validated on another four independent sorties. Results demonstrate that the proposed PINN achieves a mean absolute error of 1.9 and a root mean square error of 2.6, outperforming a conventional neural network by approximately 35%. The core value of this work is a new PINN framework that bypasses the development of complex governing equations, which enhances its practicality for engineering applications. Full article

This article presents the accumulated technical and scientific knowledge from energy performance upgrade work in emblematic and essential municipal and public buildings in Crete and the Greek islands, such as the Venetian historical building Loggia, which is used as the Heraklion City Hall, the Natural History Museum of Crete, Pancretan Stadium, the municipal swimming pool of the municipality of Minoa Pediadas, the indoor sports hall in Leros, primary schools, high schools and a cultural center. Each one of the aforementioned buildings has a distinct use, thus covering almost all different categories of municipal or public buildings and facilities. The applied energy performance upgrade process in general terms is: (1) Mapping of the current situation, regarding the existing infrastructure and final energy consumption. (2) Formulation and sizing of the proposed passive measures and calculation of the new indoor heating and cooling loads. (3) Selection, sizing and siting of the proposed active measures and calculation of the new expecting energy sources consumption. (4) Sizing and siting of power and heat production systems from renewable energy sources (RES). Through the work accomplished and presented in this article, practically all the most technically and economically feasible passive and active measures were studied: insulation of opaque surfaces, opening overhangs, natural ventilation, replacement of openings, daylighting solar tubes, open-loop geo-exchange plants, refrigerant or water distribution networks, air-to-water heat pumps, solar thermal collectors, lighting systems, automation systems, photovoltaics etc. The main results of the research showed energy savings through passive and active systems that can exceed 70%, depending mainly on the existing energy performance of the facility. By introducing photovoltaic plants operating under the net-metering mode, energy performance upgrades up to zero-energy facilities can be achieved. The payback periods range from 12 to 45 years. The setup budgets of the presented projects range from a few hundred thousand euros to 7 million euros. Full article