Search Results (33)

Four new porous homochiral metal–organic frameworks (MOFs), [M₂(camph)₂(bpa)]∙Solv (M = Co(II), Ni(II), Cu(II) and Zn(II)), based on (+)-camphoric acid (H₂camph) and 1,2-bis(4-pyridyl)ethane (bpa) were synthesized and characterized. The crystal structures of [Ni₂(camph)₂(bpa)] and [Zn₂(camph)₂(bpa)] were established by single-crystal X-ray diffraction analysis. Powder X-ray data prove the phase purity and isostructural nature of all four compounds. The thermal stability of [M₂(camph)₂(bpa)] was found to depend on the electronic configuration, as well as on the redox properties of the metal cation, and varied from 225 °C (M = Zn²⁺) to 375 °C (M = Ni²⁺). The reversible, solvent-induced sponge-like dynamics of the coordination frameworks was thoroughly investigated. Changes in the positions of reflexes, related to the length of the flexible bpa linker, were observed by powder XRD, pointing to transitions between an open-framework phase and a squeezed, non-porous phase in a crystal-to-crystal manner, while the integrity and connectivity of the coordination network were maintained. Size-selective adsorption from a benzene–cyclohexane 1:1 mixture on [Zn₂(camph)₂(bpa)] was studied by ¹H NMR analysis. The benzene-favorable composition of guest molecules (C₆H₆:C₆H₁₂ = 5:1) occluded within the host crystalline sponge revealed a preferable adsorption affinity towards smaller benzene compared with larger cyclohexane. High framework stability in various solvents, as well as successful molecular separation in the liquid state, validates the potential utilization of chiral porous metal(II) camphorate MOFs in important stereoselective applications. Full article

The liquid crystal (LC) poly-γ-benzyl-L-glutamate (PBLG) is known to possess a narrow biphasic range at the phase transition from an isotropic liquid to an anisotropic liquid crystal. We have characterized the biphasic region via deuterium nuclear magnetic resonance (NMR) of the deuterated solvent CDCl₃, with which isotropic and anisotropic populations can unambiguously be identified and quantified due to the quadrupolar coupling induced by partial alignment. In addition to a dilution series, we measured the kinetics of the alignment inside the magnet for each dilution step and were able to follow the kinetic buildup of partial alignment. Beginning with the dynamic line broadening indicative of slow fluctuations, to microheterogeneous patches of isotropic and anisotropic islands, with increasing island size being consistent with sharpened spectra, ending in fully separated isotropic and anisotropic phases on top of each other after two weeks. In addition, we studied the influence of the two example guest molecules borneol and camphor—which essentially differ in their capability to act as hydrogen bond donors or acceptors—on the biphasic region of PBLG. Full article

Background/Objectives: Lyotropic liquid crystalline nanoparticles are promising drug delivery nanocarriers, exhibiting significant technological advantages, such as their extended internal morphology. In this study, cationic non-lamellar lyotropic–lipidic liquid crystalline nanoparticles were formulated by phytantriol lipid. Methods: The poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) block copolymer carrying tri-phenyl-phosphine cations (TPP-QPDMAEMA-b-PLMA), was employed as a stabilizer co-assisted by other polymeric guests. The exact qualitative and quantitative formulation of the systems was investigated. Their physicochemical profile was depicted from a variety of light scattering techniques, while their microenvironmental parameters were determined by fluorescence spectroscopy using adequate probe molecules. The effect of environmental conditions was monitored, confirming stimuli-responsiveness properties. Their morphology was illustrated by cryo-TEM, revealing expanded internal assemblies. Resveratrol was incorporated into the nanoparticles and the entrapment efficiency was calculated. Results: Their properties were found to be dependent on the formulation characteristics, such as the lipid used, as well as the architecture of the polymeric stabilizer, also being found to be stealth toward proteins, exhibiting stimuli responsiveness and high entrapment efficiency. Conclusions: The studied liquid crystalline nanoparticles, being stimuli-responsive, with high cationic potential, high loading capacity and showing intriguing 3D structures, are suitable for pharmaceutical applications. Full article

Salt lakes are a rich source of metals used in various fields. Rubidium is found in small amounts in salt lakes, but extraction technology on an industrial scale has not been developed completely. Clathrate hydrates are crystalline compounds formed by the encapsulation of guest molecules in cage-like structures made of water molecules. One of the most important properties for engineering practices of hydrate-based technologies is the comprehension of the phase equilibrium conditions. Phase equilibrium conditions of CO₂ hydrate in rubidium chloride aqueous solution with mass fractions of 0.05, 0.10, 0.15 and 0.20 were experimentally investigated in the pressure range from 1.27 MPa to 3.53 MPa, and the temperature was from 268.7 K to 280.6 K. The measured equilibrium temperature in this study decreased roughly in proportion to the concentration of the RbCl solution from the pure water system. This depression is due to the lowering of the chemical potential of water in the liquid phase by the dissolution of RbCl. Experimental results compared with other salt solution + CO₂ hydrate systems showed that the equilibrium temperatures decreased to a similar degree for similar mole fractions. Full article

By combining molecular dynamics (MD) simulations and density functional theory (DFT), the influence of dye structure on the optical modulation properties of negative-mode guest–host liquid crystal (GHLC) systems was systematically investigated. Firstly, the reliability of the simulation method was validated by comparing the performance parameters of the GHLC system obtained from simulations with those from experimental results. Subsequently, a series of guest dye molecules, along with their mixtures with negative dielectric anisotropy mesogens, were designed and analyzed. This exploration focused on how variations in dye terminal chain lengths, substitution positions, and substituent group properties affect dye molecular geometry, dye alignment within the host, transition dipole orientation, absorption spectra, and electronic excitation properties. Our findings suggest that dye molecules with a flexible terminal chain substitution of five carbon atoms, positioned at the 2 and 6 locations on the anthraquinone core, exhibit higher order parameters, favorable for enhancing dichroic performance. Moreover, introducing different α-substituents further influences the dye orientation and electronic behavior within the host. These results highlight that structural modifications of anthraquinone-based dyes allow for the design of high-dichroic-ratio materials with customized absorption properties. Overall, our results provide a beneficial understanding of the structure–property relation in GHLC systems, offering valuable guidance for designing high-performance dye molecules and advanced optoelectronic materials in future research. Full article

Single-crystal X-ray diffraction analysis has emerged as the most reliable method for determining the structures of organic molecules. However, numerous analytes, such as liquid organic molecules, pose challenges in crystallization, making their structures directly elusive via X-ray crystallography methods. Herein, we introduced the rapid cocrystallization of a macrocycle named phenanthrene[2]arene (PTA, host) with 15 liquid organic molecules (guests). The guest liquid organic molecules were successively cocrystallized with the aid of the PTA host. Moreover, the chemical structures of the liquid organic molecules could be determined through single-crystal X-ray diffraction analysis. PTA exhibited high adaptivity and was capable of encapsulating liquid organic molecules without forming covalent bonds or strong directional interactions. The results revealed that the adaptive crystals of PTA exhibited excellent cocrystallization capacity. Weak noncovalent interactions between the host and guest molecules were crucial for organizing the guests in an ordered pattern. Full article

The applications of liquid crystals in the field of renewable, clean and sustainable technologies of energy storage are of utmost importance at present. This paper delves into dielectric spectroscopic studies of a weakly polar nematic liquid crystal (NLC) enriched with an anthraquinone dye. The primary objective is to assess the impact of increasing dye concentrations on various properties. Anthraquinone dye has been found to increase the dielectric permittivity of weakly polar NLC, leading to a 4.7-fold increase in dielectric anisotropy. Simultaneously, a reduction of around 11% in threshold and operating voltages of the NLC has also been recorded after using dye as the guest material. The added dipolar contributions provided by dye molecules have been attributed to this surplus permittivity. The NLC has been found to have an approximately 54% faster response to the applied field. The intrinsic polarization field of dye molecules accelerates nearby LC molecule reorientation, leading to a 56.5% faster fall time and a 29.8% faster rise time in a 3.0 wt% dye-doped LC cell. These experimental results have been validated via computational studies as well. The simulation results about dipole moment and polarizability provide robust support for our experimental results. Such composites evince their potential for energy storage and 5G communication technologies with adjustable impedance and permittivity. Full article

Tetrafluorocyclohexa-1,3-diene ring-containing tricyclic π-conjugated molecules are promising negative-dielectric-anisotropy guest species for vertical-alignment-type liquid-crystalline (LC) displays. Building on our previous work reporting the excellent photoluminescence (PL) properties of tricyclic π-conjugated molecules with central tetrafluorocyclohexa-1,3-diene rings, we herein synthesized four analogous molecules with terminal tetrafluorocyclohexa-1,3-diene rings from commercially available precursors and investigated the effects of substituent type and diene ring position on PL and LC properties using microscopic and spectroscopic methods. One of the prepared molecules exhibited a relatively planar molecular structure and formed herringbone-type aggregates via π/F and CH/π interactions instead of forming stacked aggregates via π/π stacking interactions, thus exhibiting relatively strong PL in solution and crystalline states. Moreover, the PL color of this compound depended on the electronic character of its terminal substituents along the long molecular axis. Of the four prepared species, two featured terminal ethyl groups and formed one or more LC phases. The PL properties of these phases indicated that the related phase transition induced changes in the aggregate structure, PL wavelength, and PL color. Our results expand the applicability of CF₂CF₂ moiety-containing tricyclic compounds as functional molecules for the fabrication of next-generation PL, LC, and PL-LC materials. Full article

A metal–organic framework (MOF) is a three-dimensional crystalline compound made from organic ligands and metals. The cross-linkage between organic ligands and metals creates a network of coordination polymers containing adjustable voids with a high total surface area. This special feature of MOF made it possible to form a host–guest interaction with small molecules, such as ionic liquid (IL), which can alter the phase behavior and improve the performance in battery applications. The molecular interactions of MOF and IL are, however, hard to understand due to the limited number of computational studies. In this study, the structural parameters of a zirconium-based metal–organic framework (UiO-66) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI] were investigated via a combined experimental and computational approach using the linker model approach. When IL was loaded, the bond length and bond angle of organic linkers were distorted due to the increased electron density surrounding the framework. The increase in molecular orbital energy after confining IL stabilized the structure of this hybrid system. The molecular interactions study revealed that the combination of UiO-66 and [EMIM][TFSI] could be a promising candidate as an electrolyte material in an energy storage system. Full article

Cyclodextrins are cyclic oligosaccharides that have received special attention due to their cavity-based structural architecture that imbues them with outstanding properties, primarily related to their capacity to host various guest molecules, from low-molecular-mass compounds to polymers. Cyclodextrin derivatization has been always accompanied by the development of characterization methods, able to unfold complicated structures with increasing precision. One of the important leaps forward is represented by mass spectrometry techniques with soft ionization, mainly matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI). In this context, esterified cyclodextrins (ECDs) benefited also from the formidable input of structural knowledge, thus allowing the understanding of the structural impact of reaction parameters on the obtained products, especially for the ring-opening oligomerization of cyclic esters. The current review envisages the common mass spectrometry approaches such as direct MALDI MS or ESI MS analysis, hyphenated liquid chromatography-mass spectrometry, and tandem mass spectrometry, employed for unraveling the structural features and particular processes associated with ECDs. Thus, the accurate description of complex architectures, advances in the gas phase fragmentation processes, assessment of secondary reactions, and reaction kinetics are discussed in addition to typical molecular mass measurements. Full article

In this study we analyse from a theoretical perspective the encapsulation of both gaseous H${}_2$ and CO${}_2$ at different conditions of pressure and temperature in a Type II porous liquid, composed by nanometric scale cryptophane-111 molecules dispersed in dichloromethane, using atomistic molecular dynamics. Gaseous H${}_2$ tends to occupy cryptophane–111’s cavities in the early stages of the simulation; however, a remarkably greater selectivity of CO${}_2$ adsorption can be seen in the course of the simulation. Calculations were performed at ambient conditions first, and then varying temperature and pressure, obtaining some insight about the different adsorption found in each case. An evaluation of the host molecule cavities accessible volume was also performed, based on the guest that occupies the pore. Finally, a discussion between the different intermolecular host–guest interactions is presented, justifying the different selectivity obtained in the molecular simulation calculations. From the results obtained, the feasibility of a renewable separation and storage method for CO${}_2$ using these nanometric scale porous liquids is pointed out. Full article

The trapping of coronene and zinc phthalocyanine (ZnPc) molecules at low concentration by a two-dimensional self-assembled nanoarchitecture of a push–pull dye is investigated using scanning tunneling microscopy (STM) at the liquid–solid interface. The push–pull molecules adopt an L-shaped conformation and self-assemble on a graphite surface into a hydrogen-bonded Kagomé network with porous hexagonal cavities. This porous host-structure is used to trap coronene and ZnPc guest molecules. STM images reveal that only 11% of the Kagomé network cavities are filled with coronene molecules. In addition, these guest molecules are not locked in the host-network and are desorbing from the surface. In contrast, STM results reveal that the occupancy of the Kagomé cavities by ZnPc evolves linearly with time until 95% are occupied and that the host structure cavities are all occupied after few hours. Full article

Coil to globule transition in poly(N-isopropylacrylamide) aqueous solutions was studied using spin probe continuous-wave electronic paramagnetic resonance (CW EPR) spectroscopy with an amphiphilic TEMPO radical as a guest molecule. Using Cu(II) ions as the “quencher” for fast-moving radicals in the liquid phase allowed obtaining the individual spectra of TEMPO radicals in polymer globule and observing inhomogeneities in solutions before globule collapsing. EPR spectra simulations confirm the formation of molten globules at the first step with further collapsing and water molecules coming out of the globule, making it denser. Full article

Delta (δ) and epsilon (ε) co-crystalline forms of syndiotactic polystyrene with a carboxylic acid guest were obtained by sorption of liquid hexanoic acid in syndiotactic polystyrene films exhibiting delta and epsilon nanoporous-crystalline forms. The characterization study is facilitated by axially stretched syndiotactic polystyrene films, used both for polarized FTIR spectra and for WAXD fiber patterns. Particularly informative are two carbonyl-stretching FTIR peaks, attributed to monomeric and dimeric hexanoic acid. The dichroism of these carbonyl peaks indicates that both delta and epsilon phases are able to include hexanoic acid as isolated guest molecules, while only the epsilon phase is also able to include dimeric hexanoic acid molecules in its crystalline channels. The inclusion of both isolated and dimeric hexanoic acid species in the epsilon form crystalline channels produces extremely fast hexanoic acid uptakes by syndiotactic polystyrene epsilon form films. Full article

The spectral properties of new boron-containing dyes were studied. One-component (pure dyes) and composite “Alq₃+dye” thin films were fabricated using the thermal vacuum deposition method. The positions of the transmission spectra maxima in a one-component film are different for different film thicknesses. The best correlation of the maxima positions of the dye transmission spectra in solid and liquid solutions was observed for thicknesses of films close to a few (up to 10) monolayers. On the other hand, the absorption spectra maxima positions of one-component dye films (upper 10 nm) and composite films with high concentration, did not match the corresponding positions of absorption spectra maxima recorded in solutions. Comparison of the absorption spectra in one-component dye films and in solutions indicates the presence of both monomers and their aggregates in one-component films (contrary to solutions where such processes of aggregation do not take place, even at very high concentrations). Simultaneously with aggregation manifestation in the absorption spectra, the intensity of fluorescence of one-component dye films dramatically decreases. A quantum chemical simulation of the possible relative arrangement of two dye molecules indicates that the most possible of the simplest types of aggregates are physical dimers. Films of practical importance (due to efficient energy transfer from host to guest molecules when all singlet excitons are captured) possess a high quantum yield of fluorescence when reaching an impurity concentration of a few percent (aggregation does not take place yet). Full article