Search Results (130)

Kefiran, the extracellular polysaccharide produced from the Generally Recognized as Safe (GRAS) bacteria in kefir grains, with its well-documented functional and health-promoting properties, constitutes a promising biopolymer with a variety of possible uses. Its compatibility with other biopolymers, such as milk proteins, and its ability to form standalone cryogels allow it to be utilized for the fabrication of films with improved properties for applications in the food and biomedical–pharmaceutical industries. In the present work, the properties of kefiran films were investigated in the presence of milk proteins (sodium caseinate, native and heat-treated whey proteins, and their mixtures), alongside glycerol (as a plasticizer) and cryo-treatment of the film-forming solution prior to drying. A total of 24 kefiran films were fabricated and studied for their physical (thickness, moisture content, water solubility, color parameters and vapor adsorption), mechanical (tensile strength and elongation at break), and optical properties. Milk proteins increased film thickness, solubility and tensile strength and reduced water vapor adsorption. The hygroscopic effect of glycerol was mitigated in the presence of milk proteins and/or the application of cryo-treatment. Glycerol was the most effective at reducing the films’ opacity. Heat treatment of whey proteins proved to be the most effective in increasing film tensile strength, reducing, at the same time, the elongation at break, while sodium caseinates in combination with cryo-treatment resulted in films with high tensile strength and the highest elongation at break. Cryo-treatment, carried out in the present study through freezing followed by gradual thawing of the film-forming solution, proved to be the most effective factor in decreasing film roughness. Based on our results, proper selection of the film-forming solution composition and its treatment prior to drying can result in kefiran–glycerol films with favorable properties for particular applications. Full article

In the era of artificial intelligence, the demand for rapid and efficient data processing is growing, and traditional computing architectures are increasingly struggling to meet these needs. Against this backdrop, memristor devices, capable of mimicking the computational functions of brain neural networks, have emerged as key components in neuromorphic systems. Despite this, memristors still face many challenges in biomimetic functionality and circuit integration. In this context, a starch–glycerol-based hydrogel memristor was developed using starch as the dielectric material. The starch–glycerol–water mixture employed in this study has been widely recognized in literature as a physically cross-linked hydrogel system with a three-dimensional network, and both high water content and mechanical flexibility. This memristor demonstrates a high current switching ratio and stable threshold voltage, showing great potential in mimicking the activity of biological neurons. The device possesses the functionality of auditory neurons, not only achieving artificial spiking neuron discharge but also accomplishing the spatiotemporal summation of input information. In addition, we demonstrate the application capabilities of this artificial auditory neuron in gain modulation and in the synchronization detection of sound signals, further highlighting its potential in neuromorphic engineering applications. These results suggest that starch-based hydrogel memristors offer a promising platform for the construction of bio-inspired auditory neuron circuits and flexible neuromorphic systems. Full article

Many studies have examined the ability of polymer-based gels or hydrogels to serve various purposes, particularly as absorbents. Several studies have reported that polyvinyl alcohol (PVA), with specific compositions and additives, is an absorbent and a decontamination material usable for heavy metals and radioactive substances. PVA has a high cost and is slowly degradable under anaerobic conditions. This study investigated the potential of natural materials, namely cassava starch, which is an environmentally friendly, non-toxic, and readily available gel-forming polymer that, notably, is inexpensive in Indonesia. The FTIR analysis showed a bond and polymer formation between cassava starch and glycerol. The cassava starch–glycerol–water mixture was applied to media such as glass, aluminum plates, and ceramics contaminated with heavy-metal stable ions which correspond to a radionuclide. The media, stored at room temperature for 24 h, becomes a film. According to the SEM and XRF results, the gel becomes a film that binds and absorbs metals when dried. The SEM results showed the presence of metals corresponding with the sources of contamination, and the XRF results showed that the quantity of metals absorbed was large. The cassava starch gel absorption results indicated the formation of an amorphous compound, as indicated by the XRF results. Based on all the analyses, the cassava starch–glycerol gel has enormous potential. It is almost equivalent to a PVA gel as an absorbent material and heavy-metal decontamination material, when used for radioactive decontamination on the material’s surface. Full article

To enhance the performance of state-of-the-art lithium-ion batteries, high-capacity silicon is increasingly introduced as active material for anodes. Furthermore, advanced batteries with new electrode architectures—so-called 3D architectures—can provide significantly enhanced electrochemical performance compared to state-of-the-art batteries. To facilitate and speed up the architectural development, the laser-induced forward transfer (LIFT) process was applied as a digital additive manufacturing method. As polyvinylidene fluoride (PVDF), the binder commonly used in the LIFT process, is not a suitable binder for silicon-containing electrodes due to its weak binding forces, polyacrylic acid (PAA) was introduced as a binder for use in printable electrode pastes. Since water as a solvent in such pastes evaporates quickly and the corresponding printing time would be too short, glycerol was added to the solvent mixture in different amounts. The silicon in the printed electrodes reaches a specific capacity of more than 3000 mAh$·{\mathrm{g}}^{–1}$ for most of the printed anodes. To further improve the electrochemical performance of the printed electrodes, as well as the rheology of the slurries, two different conductive additives with different particle sizes were used. Full article

Traditional photovoltaic-powered forced air-cooling systems face significant challenges in balancing energy efficiency and thermal comfort due to temperature sensitivity, mechanical ventilation energy consumption, and spatial constraints. This study aims to enhance building energy efficiency by integrating a radiant cooling ceiling (RCC) with a phase change material (PCM) thermal storage system, addressing the limitations of traditional photovoltaic-powered cooling systems through optimized material design and dynamic energy management. A ternary PCM mixture (glycerol–alcohol–water) was optimized using differential scanning calorimetry (DSC), demonstrating superior latent heat storage (361.66 J/g) and phase transition temperature (1.91 °C) in the selected “Slushy Ice” formulation. A 3D transient thermal model and experimental validation revealed that the RCC system achieved 57% energy savings under quasi-steady operation, with radiative heat transfer contributing 55% of total cooling capacity. The system dynamically stores cold energy during peak photovoltaic generation and releases it via RCC during low-power periods, resolving the “cooling energy consumption paradox”. Key challenges, including PCM cycling stability and thermal response time mismatches, were identified, with future research directions emphasizing multi-scale simulations and intelligent encapsulation. This work provides a viable pathway for improving building energy efficiency while maintaining thermal comfort and for improving building energy efficiency in temperate zones, with future extensions to arid and tropical climates requiring targeted material and system optimizations. Full article

Deep eutectic solvents (DESs) are environmentally friendly solvents formed by combining hydrogen bond donors and acceptors, resulting in a eutectic mixture with a lower melting point than the individual components. While there is extensive research on the electrochemical synthesis of platinum nanoparticles in DESs, to the best of our knowledge, there are no studies on the chemical reactivity of platinum(II) complexes in these systems. This study investigates the simple model reaction between K₂PtCl₄ and ethylenediamine (en), exploring the behaviour in DES environment, to optimize the synthesis of simple cisplatin-like platinum compounds with the potential objective of improving the traditional methods, decreasing the number of steps required for obtaining target compounds and reducing chemical waste. The reactions were performed in two hydrophilic DESs: choline chloride:glycerol 1:2 (glyceline, GL) and choline chloride:ethylene glycol 1:2 (ethaline, EG). The experiments, conducted in a 70% (v/v) DES and 30% 1:1 H₂O/D₂O mixture to allow for direct NMR analysis, revealed that en quickly formed [PtCl₂(en)], which further reacted to produce [Pt(en)₂]Cl₂. Reaction products were characterised by 1D (¹H and ¹⁹⁵Pt{¹H}) and 2D ([¹H,¹³C]-HSQC and [¹H,¹⁵N]-HSQC) NMR experiments. The discolouration of solutions, due to the consumption of K₂PtCl₄, and the precipitation of the purple Magnus salt [Pt(en)₂][PtCl₄] occurred over time. The main observed difference between the two solvent mixtures was the slower reactivity in glyceline, due to the much higher viscosity of the solution. Diffusion-ordered spectroscopy (DOSY) indicated lower water mobility in DES mixtures than pure water, with the reaction products closely associated with DES molecules. Full article

This work presents a method of directly imaging the growth and collapse of laser induced-bubbles in glycerol and water mixtures. The direct optical imaging is augmented with interferometric measurements of the vibration spectrum of the bubble-vessel system. Experimentation confirms the expectation that fluid viscosity affects the bubble formation and lifetime. During the experiment, deviation from the Rayleigh–Plesset equation is observed. Given this deviation of the observed bubble dynamics from the expected results, it is possible that the limited size of the sample volume and the walls of the container impact the bubble dynamics. The optical observations are supported by the observations of the system’s vibration spectrum. Full article

As the focus on green chemistry intensifies, researchers are progressively looking to incorporate biodegradable and environmentally friendly solvents. Given the prevalent use of inorganic solvents in conventional methods for detecting selenium content, this study utilized a mixture design approach to create four deep eutectic solvents (DESs). The elements of the DESs consisted of six different compounds: guanidine hydrochloride, fructose, glycerol, citric acid, proline, and choline chloride. The synthesized deep eutectic solvents (DESs) exhibited a uniform and transparent appearance. The ideal ratios for each DES were established based on their density and viscosity measurements, leading to the formulations of DES1 (34% guanidine hydrochloride, 21% fructose, 45% water), DES2 (23% guanidine hydrochloride, 32% glycerol, 45% water), DES3 (27.5% citric acid, 27.5% proline, 45% water), and DES4 (30% choline chloride, 25% citric acid, 45% water). The characterization of the deep eutectic solvents (DESs) was performed using nuclear magnetic resonance (NMR) spectroscopy and infrared (IR) spectroscopy, which confirmed the molecular formation of each DES. Following this, the DESs were applied as extraction solvents in a process involving ultrasonic-assisted microextraction (UAE) combined with inductively coupled plasma mass spectrometry (ICP-MS) to assess the selenium levels in selenium-rich rice. The results were benchmarked against traditional microwave-assisted acid digestion (TM-AD), revealing selenium recovery rates ranging from 85.5% to 106.7%. These results indicate that UAE is an effective method for extracting selenium from selenium-rich rice, thereby establishing a solid data foundation for the environmentally friendly analysis of selenium content in rice. Full article

Waste management presents a significant challenge for agri-food industries, but also an opportunity to recover valuable bioactive compounds, particularly phenolics, aligning with circular economy principles. This study compares the efficacy of conventional solvents and natural deep eutectic solvents (NADES) in extracting polyphenols from olive leaves using the scalable techniques of solid–liquid extraction (SLE) with mechanical stirring and microwave-assisted extraction (MAE). Key factors affecting extraction yield, including solvent composition, time, and temperature were investigated. Extraction efficiency was evaluated by measuring total polyphenol content (TPC) by high-performance liquid chromatography (HPLC), antioxidant capacity (FRAP assay), and individual phenolic compounds, also quantified using HPLC. Additionally, differential pulse voltammetry (DPV) was employed to evaluate the antioxidant quality of the extracts. NADES demonstrated superior extraction performance compared to conventional solvents, with the choline–glycerol system showing the highest efficiency. The combination of MAE and NADES emerged as a green and sustainable alternative to traditional methods, offering improved yield and speed. In contrast, SLE with water or ethanol/water mixtures required extended times or higher temperatures for comparable results but offered easier scalability for industrial applications. Full article

This study investigated the potential of natural deep eutectic solvents (NADESs) for extracting bioactive compounds from the aerial parts of two mountain tea taxa, Sideritis clandestina ssp. peloponnesiaca (Boiss. & Heldr.) Baden and Sideritis raeseri Boiss. & Heldr. ssp. raeseri. Five NADEs, composed of betaine, glycerol, glucose, urea, citric acid, and sucrose, were evaluated for their extraction efficiency compared to conventional solvents (water and 70% ethanol). The total phenolic content (TPC) and antioxidant activity (FRAP and DPPH assays) were determined. Results showed that water was not a good extraction solvent. Despite the great solvent-dependent differences, most NADEs, particularly the betaine–glycerol–glucose mixture (BGG4), exhibited comparable or even superior extraction efficiency and antioxidant activity compared to 70% ethanol. The secondary metabolites in the BGG4 and 70% ethanol extracts were determined with HPLC-MS. The BGG4 extracts of both Sideritis taxa had a rich phenolic profile, with the major ingredients being chlorogenic acid, verbascoside, and non-, mono- and di-acetylated allosyl hypolaetin glycosides. Although distinct quantitative differences in their composition compared to the respective 70% ethanol extracts, and between them were noted, overall, the content of secondary metabolites in both S. raeseri extracts was lower than that of the S. clandestina extracts. These findings suggest that NADEs, particularly BGG4, are promising green solvents for extracting bioactive compounds from Sideritis taxa, paving the way for potential applications in the development of natural and sustainable cosmetic products. Full article

Bacterial cellulose (BC) is a subject of interest for researchers due to its advantageous characteristics, including a straightforward manufacturing process, biocompatibility, and extensive modification potential. The hydrophilic nature of the material is beneficial in some applications, yet a limiting factor in others. This study aimed to develop BC-based materials with goFogureod moisture resistance. The modification of bacterial cellulose (BC) using apple powder, stearic acid, or a combination of these modifiers resulted in the formation of a range of materials, some of which had their surfaces additionally functionalised by coating with a mixture of apple powder and stearic acid (HSt). The nature and type of changes were confirmed by FTIR and theoretical analysis, which was conducted by modelling the interaction between cellulose and homogalacturonan or rhamnogalacturonan using SCIGRESS v.FJ 2.7 software. Changes in hydrogen bonding resulting in a weakening of the interactions between cellulose and water in the presence of pectin were demonstrated by both empirical data and modelling. The effectiveness of BC functionalisation was confirmed by material wettability. The water contact angle changed from 38° for the unmodified material to 125° for the material obtained by modification of the bacterial cellulose with glycerol followed by modification with a mixture of HSt at a concentration of 10% and AP at a concentration of 60%. The modifications produced a material with a robust hydrophobic surface. The results suggest that the surface roughness may not be the primary factor influencing the hydrophilicity or hydrophobicity of these materials but that it is more likely to be related to the interactions of components. None of the tested materials demonstrated antimicrobial activity against Escherichia coli, Bacillus subtilis, Staphylococcus aureus, Aspergillus niger, or Candida albicans. Full article

The viscoelastic properties of biological membranes are crucial in controlling cellular functions and are determined primarily by the lipids’ composition and structure. This work studies these properties by varying the structure of the constituting lipids in order to influence their interaction with high-density lipoprotein (HDL) particles. Various fluorescence-based techniques were applied to study lipid domains, membrane order, and the overall lateral as well as the molecule–internal glycerol region mobility in HDL–membrane interactions (i.e., binding and/or cargo transfer). The analysis of interactions with HDL particles and various lipid phases revealed that both fully fluid and some gel-phase lipids preferentially interact with HDL particles, although differences were observed in protein binding and cargo exchange. Both interactions were reduced with ordered lipid mixtures containing cholesterol. To investigate the mechanism, membranes were prepared from single-lipid components, enabling step-by-step modification of the lipid building blocks. On a biophysical level, the different mixtures displayed varying stiffness, fluidity, and hydrogen bond network changes. Increased glycerol mobility and a strengthened hydrogen bond network enhanced anchoring interactions, while fluid membranes with a reduced water network facilitated cargo transfer. In summary, the data indicate that different lipid classes are involved depending on the type of interaction, whether anchoring or cargo transfer. Full article

The development of thermoplastic starch (TPS) films is crucial for fabricating sustainable and compostable plastics with desirable mechanical properties. However, traditional design of experiments (DOE) methods used in TPS development are often inefficient. They require extensive time and resources while frequently failing to identify optimal material formulations. As an alternative, adaptive experimental design methods based on Bayesian optimization (BO) principles have been recently proposed to streamline material development by iteratively refining experiments based on prior results. However, most implementations are not suited to manage the heteroscedastic noise inherently present in physical experiments. This work introduces a heteroscedastic Gaussian process (HGP) model within the BO framework to account for varying levels of uncertainty in the data, improve the accuracy of the predictions, and increase the overall experimental efficiency. The aim is to find the optimal TPS film composition that maximizes its elongation at break and tensile strength. To demonstrate the effectiveness of this approach, TPS films were prepared by mixing potato starch, distilled water, glycerol as a plasticizer, and acetic acid as a catalyst. After gelation, the mixture was degassed via centrifugation and molded into films, which were dried at room temperature. Tensile tests were conducted according to ASTM D638 standards. After five iterations and 30 experiments, the films containing 4.5 wt% plasticizer and 2.0 wt% starch exhibited the highest elongation at break (M = 96.7%, SD = 5.6%), while the films with 0.5 wt% plasticizer and 7.0 wt% starch demonstrated the highest tensile strength (M = 2.77 MPa, SD = 1.54 MPa). These results demonstrate the potential of the HGP model within a BO framework to improve material development efficiency and performance in TPS film and other potential material formulations. Full article

The growing demand for more sustainable routes and processes in the mixture separation and purification industry has generated a need to search for innovations, with new solvent alternatives being a possible solution. In this context, a new class of green solvents, known as deep eutectic solvents (DESs), has been gaining prominence in recent years in both academic and industrial spheres. These solvents, when compared to ionic liquids (ILs), are more environmentally friendly, less toxic, low-cost, and easier to synthesize. In addition, they have significantly lower melting points than their precursors, offering a promising option for various applications in this industrial sector. Understanding and studying the thermodynamic behavior of systems composed of these substances in purification and separation processes, such as liquid–liquid extraction and azeotropic distillation, is extremely important. This work aimed to study the phase behavior of liquid–liquid equilibrium (LLE) and vapor–liquid equilibrium (VLE) of water + 1-butanol + DES (choline chloride + glycerol) systems with a molar ratio of 1:2. Experimental LLE data, obtained at 298.15 K and 101.3 kPa, and VLE data, obtained at 101.3 kPa and in the temperature range of 364.05 K–373.85 K, were submitted to the thermodynamic quality/consistency test, proposed by Marcilla et al. and Wisniak, and subsequently modeled using the gamma–gamma approach for the LLE and gamma–phi for the VLE. The non-random two-liquid (NRTL) model was used to calculate the activity coefficient. The results are presented for the VLE in a temperature–composition phase diagram (triangular prism) and triangular phase diagrams showing the binodal curve and tie lines (LLE). The separation and distribution coefficients of LLE were determined to evaluate the extractive potential of the DES. For the VLE, the values of the relative volatility of the system were calculated, considering the entrainer free-basis, to evaluate the presence or absence of azeotropes in the range of collected points. From these data, it was possible to compare DES with ILs as extracting agents, using data from previous studies carried out by the research group. Therefore, the results indicate that the NRTL model is efficient at correlating the fluid behavior of both equilibria. Thus, this study serves as a basis for future studies related to the understanding and design of separation processes. Full article

The growing demand for sustainable building materials has boosted research on plant-based composite materials, including hemp shives bound with biodegradable binders. This study investigates the enhancement of potato-starch-based binders with sodium metasilicate and glycerol to produce eco-friendly bio-composites incorporating hemp shives. Potato starch, while renewable, often results in suboptimal mechanical properties and durability in its unmodified form. The addition of sodium metasilicate is known to improve the mechanical strength and thermal stability of starch-based materials, while glycerol acts as a plasticizer, potentially enhancing flexibility and workability. Bio-composites were produced with varying concentrations of sodium metasilicate (0–107% by mass of starch) and glycerol (0–133% by mass of starch), and their properties were evaluated through thermal analysis, density measurements, water absorption tests, compressive strength assessments, and thermal conductivity evaluations. The results demonstrate that sodium metasilicate significantly increases the bulk density, water resistance, and compressive strength of the bio-composites, with enhancements up to 19.3% in density and up to 2.3 times in compressive strength. Glycerol further improves flexibility and workability, though excessive amounts can reduce compressive strength. The combination of sodium metasilicate and glycerol provides optimal performance, achieving the best results with an 80% sodium metasilicate and 33% glycerol mixture by weight of starch. These modified bio-composites offer promising alternatives t2 o conventional building materials with improved mechanical properties and environmental benefits, making them suitable for sustainable construction applications. Full article