Search Results (46)

Maintaining high water quality is essential not only for human survival but also for social and ecological safety. In recent years, due to the influence of human activities and natural factors, water quality has significantly deteriorated, and effective water quality monitoring is urgently needed. Traditional water quality monitoring requires substantial financial investment, whereas the remote sensing and random forest model not only reduces operational costs but also achieves a paradigm shift from discrete sampling points to spatially continuous surveillance. The random forest model was adopted to establish a remote sensing inversion model of three water quality parameters (conductivity, total nitrogen (TN), and total phosphorus (TP)) during the growing period (May to September) from 2020 to 2022 in the Songhua River Basin (SRB), using Landsat 8 imagery and China’s national water quality monitoring section data. Model verification shows that the R² of conductivity is 0.67, followed by that of TN at 0.52 and TP at 0.47. The results revealed that the downstream conductivity of SRB (212.72 μS/cm) was significantly higher than that upstream (161.62 μS/cm), with TN and TP concentrations exhibiting a similar increasing pattern. This study is significant for improving ecological conservation and human health in the SRB. Full article

This study explores a methodology for assessing territorial innovation potential using OpenStreetMap (OSM) data and geoinformation technologies. Traditional assessment methods often rely on aggregated statistical data, which provide a generalized view but overlook the spatial heterogeneity within regions. To address this limitation, the proposed methodology utilizes open, up-to-date OSM data to identify key infrastructure elements, such as universities, research institutions, and data centers, which drive regional innovation. The methodology includes data extraction, harmonization, and spatial analysis using tools like QGIS and kernel density estimation. Results from the PoliRuralPlus project pilot regions highlight significant differences in innovation potential between urban centers and rural areas, emphasizing the importance of detailed spatial data in policy making and regional development planning. The study concludes that OSM-based assessments provide spatially detailed targeted, flexible, and replicable insights into regional innovation potential compared to traditional methods. However, the limitations of crowdsourced data, such as variability in quality and completeness, are acknowledged. Future developments aim to integrate OSM with official statistical data and other data resources to support more efficient and fair resource allocation and strategic investments in regional innovation ecosystems. Full article

The systematic approach to the establishment of a cadaster in most European countries has resulted in a variety of cadastral documents. Most official cadastral data are from the 19th and 20th centuries and are stored as hard copies or electronic data in a data warehouse, while the original documents are stored in analog format in separate locations, making the cadastral data difficult to access. The increasing interest in the use of archival cadastral documents has stimulated their digitalization in most countries, allowing users to access cadastral documents through metadata catalogs. Most catalogs use archival metadata standards to describe cadastral documents, with a lack of application of geoinformation metadata standards that represent fundamental spatial datasets. Archival metadata standards do not provide enough information about the origin and quality of cadastral data. The aim of this study was to examine the applicability of the ISO 19115-1 standard for describing cadastral documents. The methodology includes a comparison and an analysis of documents which are stored in different locations. The metadata of archived cadastral documents are recorded in archive inventories, and archives use different terminology for documents with the same content. The scientific contribution of this study is given by the classification of key documents and their associated properties that uniquely described each document. Four types of documents were classified by comparison, and we analyzed the content between documents. Property identification resulted in the semantic mapping to metadata elements of ISO 19115-1 and showed a considerable congruence of elements. It was possible to apply the ISO 19115-1 standard for describing documents of systematic cadaster establishment, with additional extensions for some elements. Proposed extensions to describe the cadastral documents include replacing free text with domains of appropriate values, adding stricter obligations, and restricting the use of domain values. The standardization of metadata for analog cadastral documents in archives has created a prerequisite for the development of a metadata catalog, which would increase the availability and accessibility of cadastral data for different user groups. Full article

Urban Vitality (UV) is a critical indicator for measuring sustainable urban development and quality. It reflects the dynamic interactions and supply–demand coordination within urban systems, especially concerning the human–land relationship. This study aims to quantify the UV of Luohe City, China, for the year 2023, analyze its spatial characteristics, and investigate the driving patterns of socio-ecological land functions on UV intensity and heterogeneity under different scenarios. Utilizing multi-source data, including human mobility data from Baidu Location-Based Services (LBSs), Landsat-9, MODIS, and diverse geo-information datasets, we conducted factor screening and comprehensive assessments. Firstly, Self-Organizing Maps (SOMs) were employed to identify typical activity patterns, and the Urban Vitality Index (UVI) was calculated based on Human Mobility Intensity (HMI) data. Subsequently, a framework for quantity–quality–structure assessments weighted and aggregated sub-indicators to evaluate the Land Social Function (LSF) and Land Ecological Function (LEF). Following the screening process, a Multi-scale Geographically Weighted Regression (MGWR) was applied to analyze the scale and driving relationships between UVI and the land assessment sub-indicators. The results were as follows: (1) The UV distribution in Luohe City was highly uneven, with high vitality areas concentrated within the built-up regions. (2) UV showed significant correlations with both LSF and LEF. The influence of LSF on UV was stronger than that of LEF, with the effectiveness of LEF relying on the well-established provisioning of LSF. (3) Artificial Surface Ratio (ASR) and Corrected Night Lights (LERNCI) were identified as key drivers of UV across multiple scenarios. Under the weekend scenario, the Green Space Ratio (GSR) and the Vegetation Quality (VQ) notably enhanced the attractiveness of human activities. (4) The impacts of drivers varied at the urban, township, and street scales. The analysis focuses on factors with significant bandwidth changes across multiple scenarios: VQ, Remote-Sensing-based Ecological Index (RSEI), GSR, ASR, and ALSI. This study underscores the importance of socio-ecological land functions in enhancing urban vitality, offering valuable insights and data support for urban planning. Full article

Land vehicle gravity anomaly measurement relies heavily on global navigation satellite system (GNSS). However, when gravity measurement is carried out in special environments such as forests, valleys and tunnels, GNSS observation quality will inevitably decline, which directly affects the accuracy of gravity anomaly measurement. From the point of view of the gravity anomaly measurement principle, obtaining accurate elevation information of the test line is the premise to ensure the accuracy of gravity anomaly measurement. Thus, this paper proposes a strapdown land vehicle dynamic gravity anomaly measurement method combining an odometer and a geo-information system. In this method, strapdown inertial navigation errors are suppressed by observing the velocity of the odometer output. Then, the position information obtained by the combined navigation is entered into the geo-information system to obtain the elevation. The results of a single test line show that the external coincidence accuracy of the proposed method is 1.65 mGal, and the accuracy is comparable to the traditional GNSS assisted land vehicle gravimetry method. In addition, compared with the odometer assisted land vehicle gravimetry method, the external coincidence accuracy is increased by 30%. Full article

The selection of sites for permanent environmental monitoring of natural water bodies should rely on corresponding source apportionment studies. Tools like the water quality index (WQI) assessment may support this objective. This study aims to analyze a decade-long dataset of measurements of 26 chemical components at 26 observation points within the Irtysh River Basin, aiming to identify priority zones for stricter environmental regulations. It was achieved through the WQI tool integrated with geoinformation systems (GISs) and multivariate statistical techniques. The findings highlighted that both upstream sections of tributaries (Oba and Bukhtarma rivers) and the mainstream of the basin are generally in good condition, with slight fluctuations observed during flooding periods. Areas in the basin experiencing significant impacts from mining and domestic wastewater treatment activities were identified. The rivers Glubochanka (GL) and Krasnoyarka (KR) consistently experienced marginal water quality throughout the observation period. Various contaminant sources were found to influence water quality. The impact of domestic wastewater treatment facilities was represented by twofold elevated concentrations of chemical oxygen demand, reaching 22.6 and 27.1 mg/L for the KR and GL rivers, respectively. Natural factors were indicated by consistent slight exceedings of recommended calcium levels at the KR and GL rivers. These exceedances were most pronounced during the cold seasons, with an average value equal to 96 mg/L. Mining operations introduced extremal concentrations of trace elements like copper, reaching 0.046–0.051 mg/L, which is higher than the threshold by 12–13 times; zinc, which peaked at 1.57–2.96 mg/L, exceeding the set limit by almost 50–100 times; and cadmium, peaking at levels surpassing 1000 times the safe limit, reaching 0.8 mg/L. The adverse impact of mining activities was evident in the Tikhaya, Ulba, and Breksa rivers, showing similar trends in trace element concentrations. Seasonal effects were also investigated. Ice cover formation during cold seasons led to oxygen depletion and the exclusion of pollutants into the stream when ice melted, worsening water quality. Conversely, flooding events led to contaminant dilution, partially improving the WQI during flood seasons. Principal component analysis and hierarchical cluster analysis indicated that local natural processes, mining activities, and domestic wastewater discharge were the predominant influences on water quality within the study area. These findings can serve as a basis for enhanced environmental regulation in light of updated ecological legislation in Kazakhstan, advocating for the establishment of a comprehensive monitoring network and the reinforcement of requirements governing contaminating activities. Full article

Sustainable tourism minimises the adverse impact of tourism on the natural environment and local culture while stimulating the socioeconomic development of regions or even countries. Geoportals and (geo)informational mashup portals significantly affect sustainable tourism planning through modern computer solutions for more sustainable planning of tourist activities on the demand and supply sides. This study had two research aims: (1) to develop a checklist for assessing the functionality of tourist geoportals and evaluate it and (2) to assess the inventory of functions useful for sustainable tourism planning available at selected geoportals with the checklist. The aims were pursued with an original research tool, the Functionality Assessment Checklist (FAC). The FAC is a set of original criteria useful for assessing the quality of tourist geoportals. This study investigated the following research questions: (Q1) What functions should be included on a checklist for assessing the functionality of geoportals useful for sustainable tourism planning? (Q2) What functions should be included in a geoportal to facilitate sustainable tourism planning? The original contributions of this article are (1) the checklist for assessing the functionality of tourist geoportals and (2) the assessment of the impact of geoportal’s functionality on the possibility of planning sustainable tourism. The functionality assessment revealed that the tested geoportals have most of the tourism, informational, educational, and use-related functions. This suggests they can be useful for sustainable tourism planning. Full article

Improving geo-information decision evaluation is an important part of geospatial decision support research, particularly when considering vulnerability, risk, resilience, and sustainability (V-R-R-S) of urban land–water systems (ULWSs). Previous research enumerated a collection of V-R-R-S conceptual component commonalties and differences resulting in a synthesis concept called VRRSability. As a single concept, VRRSability enhances our understanding of the relationships within and among V-R-R-S. This paper reports research that extends and deepens the VRRSability synthesis by elucidating relationships among the V-R-R-S concepts, and organizes them into a VRRSability conceptual framework meant to guide operationalization within decision support systems. The core relationship within the VRRSability framework is ‘functional performance’, which couples land and water concerns within complex ULWS. Using functional performance, we elucidate other significant conceptual relationships, e.g., scale, scenarios and social knowledge, among others. A narrative about the functional performance of green stormwater infrastructure as part of a ULWS offers a practical application of the conceptual framework. VRRSability decision evaluation trade-offs among land and water emerge through the narrative, particularly how land cover influences water flow, which in turn influences water quality. The discussion includes trade-offs along risk–resilience and vulnerability–sustainability dimensions as key aspects of functional performance. Conclusions include knowledge contributions about a VRRSability conceptual framework and the next steps for operationalization within decision support systems using artificial intelligence. Full article

Remote-sensing images of high spatial resolution (HSR) are valuable sources of fine-grained spatial information for various applications, such as urban surveys and governance. There is continuing research on positional errors in remote-sensing images and their impacts in geoprocessing and applications. This paper explores the combined use of multi-point geostatistics (MPS), machine learning—in particular, generalized additive modeling (GAM)—and computer-image correlation for characterizing positional errors in images—in particular, HSR images. These methods are employed because of the merits of MPS in being flexible for non-parametric and joint simulation of positional errors in X and Y coordinates, the merits of GAM in being capable of handling non-stationarity in-positional errors through error de-trending, and the merits of computer-image correlation in being cost-effective in furnishing the training data (TD) required in MPS. Procedurally, image correlation is applied to identify homologous image points in reference-test image pairs to extract image displacements automatically in constructing TD. To cope with the complexity of urban scenes and the unavailability of truly orthorectified images, visual screening is performed to clean the raw displacement data to create quality-enhanced TD, while manual digitization is used to obtain reference sample data, including conditioning data (CD), for MPS and test data for performance evaluation. GAM is used to decompose CD and TD into trends and residuals. With CD and TD both de-trended, the direct sampling (DS) algorithm for MPS is applied to simulate residuals over a simulation grid (SG) at 80 m spatial resolution. With the realizations of residuals and, hence, positional errors generated in this way, the means, standard deviation, and cross correlation in bivariate positional errors at SG nodes are computed. The simulated error fields are also used to generate equal-probable realizations of vertices that define some road centerlines (RCLs), selected for this research through interpolation over the aforementioned simulated error fields, leading to error metrics for the RCLs and for the lengths of some RCL segments. The enhanced georectification of the RCLs is facilitated through error correction. A case study based in Shanghai municipality, China, was carried out, using HSR images as part of generalized point clouds that were developed. The experiment results confirmed that by using the proposed methods, spatially explicit positional-error metrics, including means, standard deviation, and cross correlation, can be quantified flexibly, with those in the selected RCLs and the lengths of some RCL segments derived easily through error propagation. The reference positions of these RCLs were obtained through error correction. The positional accuracy gains achieved by the proposed methods were found to be comparable with those achieved by conventional image georectification, in which the CD were used as image-georectification control data. The proposed methods are valuable not only for uncertainty-informed image geolocation and analysis, but also for integrated geoinformation processing. Full article

Groundwater is a precious natural resource that is vital to various aspects of life. Punjab is experiencing groundwater stress due to urbanization and population growth, leading to overuse and reduced aquifer recharge. Sustainable groundwater supplies can only be created through better management and artificial recharge techniques. This study uses multi-influencing factor, literature-based, and combined techniques to identify and characterize groundwater-managed aquifer recharge potential sites (GWMARPSs) in Punjab. There are limitations to the previous work in this field, and these factors have not been used to estimate GWRPSs in the study area. The study uses GIS and RS techniques to overlay twelve geo-informative layers, with rainfall being the most significant factor. High-quality data and observations from the field are incorporated into the model. The study classifies the GWMARPSs into five categories, with Punjab having 0.34%, 13.29%, 60.68%, 25.26%, and 0.43% of the least, poorly, moderately, well-, and highly suitable sites. Punjab’s southern regions are least suitable for recharge, while some areas in eastern and northern Punjab are well-suited for recharge. Alluvial plains, valleys, low-lying areas, and areas with volcanic landforms are classified as least to poorly suitable zones. Model predictions are validated using piezometric level data and ROC and exhibit good performance (AUC, 0.74). This study could serve as a baseline for future groundwater research. Full article

Conventional and scientific cropping patterns are important in realizing the sustainable utilization of Black soil and promoting the high-quality development of agriculture. It also has far-reaching significance for protecting Black soil and constructing the crop rotation system to identify the cropping patterns in Northeast China and analyze their spatio-temporal dynamic change. Using the geo-information Tupu methods and transfer land matrix, this study identified the cropping patterns and their spatio-temporal change based on remote sensing data for three periods, namely 2002–2005, 2010–2013, and 2018–2021. The main results revealed that the maize continuous, mixed cropping, maize-soybean rotation, and soybean continuous cropping patterns were the main cropping patterns in Wangkui County, with the total area of the four patterns accounting for 95.28%, 94.66%, and 81.69%, respectively, in the three periods. Against the backdrop of global climate warming, the cropping patterns of continuous maize and soybean and the mixed cropping pattern in Wangkui County exhibited a trend towards evolving into a maize-soybean rotation in the northern region. Moreover, the maize-soybean rotation further evolved into a mixed cropping system of maize and soybean in the north. Furthermore, the spatio-temporal evolution of cropping patterns was significantly driven by natural and social factors. Specifically, natural factors influenced the spatio-temporal patterns of variation in cropping patterns, while social factors contributed to the transformation of farmers’ cropping decision-making behavior. Accordingly, new insights, institutional policies, and solid solutions, such as exploring and understanding farmers’ behavior regarding crop rotation practices and mitigating the natural and climatic factors for improving food security, are urgent in the black soil region of China. Full article

This article presents an assessment of atmospheric pollutant concentrations based on state-of-the-art geoinformation research methods that utilize Sentinel-5 satellite imagery, the cloud computing platform Google Earth Engine (GEE), and ArcGIS 10.8 software. The spatial distributions of some pollutants (nitrogen dioxide, sulfur dioxide, formaldehyde, carbon monoxide, methane) in the atmosphere are analyzed on the example of the basins of the Zapadnyy Bulganak, Alma, Kacha, Belbek, and Chernaya rivers on the north-western slope of the Crimean Mountains. The concentrations of the average annual and average monthly values of pollutants for each catchment area are compared. The GEE (Google Earth Engine) platform is used for extracting annual and monthly average rasters of pollutant substances, while ArcGIS is utilized for enhanced data visualization and in-depth analytical processing. Background concentrations of pollutants within protected natural areas are calculated. By comparing the spatial and temporal distribution of pollutant values with the background concentrations within these protected areas, a complex index of atmospheric pollution is constructed. The spatial and temporal variability of nitrogen dioxide (NO₂) concentrations has been thoroughly examined. Based on the regression analysis (R > 0.85), the field of values of the total amount of emissions (which are analyzed for only six points in the study area and in the surrounding areas) was restored on the basis of the spatial and temporal heterogeneity of the field of distribution of nitrogen dioxide values (NO₂). Since air pollution can have negative consequences, both for human health and for the ecosystem as a whole, this study is of great importance for assessing the ecological situation within the river basins of the north-western slope of the Crimean Mountains. This work also contributes to a general understanding of the problem of gas emissions, whose study is becoming increasingly relevant. The aim of this research is to assess the potential application of Sentinel-5 satellite imagery for air quality assessment and pollution analysis within the river basins of the north-western slopes of the Crimean Mountains. The significance of this study lies in the innovative use of Sentinel-5 satellite imagery to investigate air pollution in extensive regions where a regular network of observation points is lacking. Full article

Detecting and classifying objects from satellite images are crucial for many applications, ranging from marine monitoring to land planning, ecology to warfare, etc. Spatial and temporal information-rich satellite images are exploited in a variety of manners to solve many real-world remote sensing problems. Satellite image classification has many associated challenges. These challenges include data availability, the quality of data, the quantity of data, and data distribution. These challenges make the analysis of satellite images more challenging. A convolutional neural network architecture with a scaling method is proposed for the classification of satellite images. The scaling method can evenly scale all dimensions of depth, width, and resolution using a compound coefficient. It can be used as a preliminary task in urban planning, satellite surveillance, monitoring, etc. It can also be helpful in geo-information and maritime monitoring systems. The proposed methodology is based on an end-to-end, scalable satellite image interpretation. It uses spatial information from satellite images to categorize these into four categories. The proposed method gives encouraging and promising results on a challenging dataset with a high inter-class similarity and intra-class variation. The proposed method shows 99.64% accuracy on the RSI-CB256 dataset. Full article

Advanced remote sensing technologies have undoubtedly revolutionized palm oil industry management by bringing business and environmental benefits on a single platform. It is evident from the ongoing trend that remote sensing using satellite and aerial data is able to provide precise and quick information for huge palm oil plantation areas using high-resolution image processing, which is also recognized by the certification agencies, i.e., the Roundtable on Sustainable Palm Oil (RSPO) and ISCC (International Sustainability and Carbon Certification). A substantial improvement in the palm oil industry could be attained by utilizing the latest Geo-information tools and technologies equipped with AI (Artificial Intelligence) algorithms and image processing, which could help to identify illegal deforestation, tree count, tree height, and the early detection of diseased leaves. This paper reviews some of the latest technologies equipped with remote sensing, AI, and image processing for managing the palm oil plantation. This manuscript also highlights how the distress in the current palm oil industry could be handled by mentioning some of the improvised monitoring systems for palm oil plantation that could in turn increase the yield of palm oil. It is evident from the proposed review that the accuracy of AI algorithms for palm oil detection depends on various factors such as the quality of the training data, the design of the neural network, and the type of detection task. In general, AI models have achieved high accuracy in detecting palm oil tree images, with some studies reporting accuracy levels up to 91%. However, it is important to note that accuracy can still be affected by factors such as variations in lighting conditions and image resolution. Nonetheless, with any AI model, the accuracy of algorithms for palm oil tree detection can be improved by collecting more diverse training data and fine-tuning the model. Full article

Unmanned aerial vehicles (UAVs) have become very popular tools for geoinformation acquisition in recent years. They have also been applied in many other areas of life. Their navigation is highly dependent on global navigation satellite systems (GNSS). The European Geostationary Navigation Overlay Service (EGNOS) is intended to support GNSSs during positioning, mainly for aeronautical applications. The research presented in this paper concerns the analysis of the positioning quality of a modified GPS/EGNOS algorithm. The calculations focus on the source of ionospheric delay data as well as on the aspect of smoothing code observations with phase measurements. The modifications to the algorithm concerned the application of different ionospheric models for position calculation. Consideration was given to the EGNOS ionospheric model, the Klobuchar model applied to the GPS system, the Klobuchar model applied to the BeiDou system, and the NeQuick model applied to the Galileo system. The effect of removing ionospherical corrections from GPS/EGNOS positioning on the results of the determination of positioning quality was also analysed. The results showed that the original EGNOS ionospheric model maintains the best accuracy results and a better correlation between horizontal and vertical results than the other models examined. The additional use of phase-smoothing of code observations resulted in maximum horizontal errors of approximately 1.3 m and vertical errors of approximately 2.2 m. It should be noted that the results obtained have local characteristics related to the area of north-eastern Poland. Full article