Search Results (1,655)

Previous studies have extensively applied the generalized consolidation theory, which incorporates a two-stress state variable framework, to predict the volumetric behavior of unsaturated expansive soils under varying mechanical stress and matric suction. A key requirement for this approach is a constitutive surface that links the soil void ratio to both net stress and matric suction. A large number of fitting parameters are typically needed to accurately fit a two-variable void ratio surface equation to laboratory test data. In this study, a single-stress state variable framework was adopted to describe the void ratio as a function of effective stress for unsaturated soils. The proposed approach was applied to fit void ratio–effective stress constitutive curves to laboratory test data for two different expansive clays. Additionally, a finite element model coupling variably saturated flow and stress–strain analysis was developed to simulate the volume change behavior of expansive clay subjected to moisture fluctuations. The model utilizes suction stress to compute the effective stress field and incorporates the dependency of soil modulus on volumetric water content based on the proposed void ratio–effective stress relationship. The developed numerical model was validated against a benchmark problem in which a layer of Regina expansive clay was subjected to a constant infiltration rate. The results demonstrate the effectiveness of the proposed model in simulating expansive soil deformations under varying moisture conditions over time. Full article

This mini-review emphasizes the potential of biomass-derived materials as sustainable components for next-generation electrochemical energy storage systems. Biomass obtained from abundant and renewable natural resources can be transformed into carbonaceous materials. These materials typically possess hierarchical porosities, adjustable surface functionalities, and inherent heteroatom doping. These physical and chemical characteristics provide the structural and chemical flexibility needed for various electrochemical applications. Additionally, biomass-derived materials offer a cost-effective and eco-friendly alternative to traditional components, promoting green chemistry and circular resource utilization. This review provides a systematic overview of synthesis methods, structural design strategies, and material engineering approaches for their use in lithium-ion batteries (LIBs), lithium–sulfur batteries (LSBs), and supercapacitors (SCs). It also highlights key challenges in these systems, such as the severe volume expansion of anode materials in LIBs and the shuttle effect in LSBs and discusses how biomass-derived carbon can help address these issues. Full article

The compound effects of extreme climate change and intensive urban development have led to more frequent urban inundation, highlighting the urgent need for the fine-scale evaluation of stormwater drainage system performance in high-density urban built-up areas. A typical basin, located in Shenzhen, was selected, and a pipe–river coupled SWMM was developed and calibrated via a genetic algorithm to simulate the storm drainage system. Design storm scenario analyses revealed that regional inundation occurred in the central area of the basin and the enclosed culvert sections of the midstream river, even under a 0.5-year recurrence period, while the downstream open river channels maintained a substantial drainage capacity under a 200-year rainfall event. To systematically identify bottleneck zones, two novel metrics, namely, the node cumulative inundation volume and the conduit cumulative inundation length, were proposed to quantify the local inundation severity and spatial interactions across the drainage network. Two critical bottleneck zones were selected, and strategic improvement via the cross-sectional expansion of pipes and river culverts significantly enhanced the drainage efficiency. This study provides a practical case study and transferable technical framework for integrating hydraulic modeling, spatial analytics, and targeted infrastructure upgrades to enhance the resilience of drainage systems in high-density urban environments, offering an actionable framework for sustainable urban stormwater drainage system management. Full article

Liquid calcium aluminate cement (LCAC) is an innovative material technology with significant potential for varied applications in civil engineering. However, despite its promising results, a significant gap remains in the direct application of LCAC as a concrete binder. The primary catalysts for LCAC are sodium hydroxide (NaOH) and potassium hydroxide (KOH). Therefore, it is crucial to investigate the effects of sodium and potassium ions on alkali–aggregate reactions in concrete structures. This study evaluated the durability of liquid calcium aluminate cement concrete catalyzed using four different concentrations of NaOH (0.5%, 1.0%, 1.5%, and 2.0%) as experimental variables, incorporating a control group of traditional concrete with a water–cement ratio of 0.64. The findings indicate that NaOH catalysis in the concrete significantly trigger alkali–aggregate reactions, leading to volume expansion. Furthermore, it increased chloride ion penetration and porosity in the concrete. These effects were more notable with the increase in NaOH concentration. The results suggested that NaOH catalysis can enhance certain chemical reactions within the concrete matrix; however, its concentration must be carefully controlled to mitigate adverse effects. The NaOH dosage should be limited to 0.5% to ensure optimal durability of the concrete. This study emphasizes the crucial importance of precisely balancing catalyst concentration to maintain the long-term durability and performance of liquid calcium aluminate cement concrete in structural applications. Full article

In most commercial lithium-ion batteries, graphite remains the primary anode material. However, its theoretical specific capacity is only 372 mAh∙g⁻¹, which falls short of meeting the demands of high-performance electronic devices. Silicon anodes, despite boasting an ultra-high theoretical specific capacity of 4200 mAh∙g⁻¹, suffer from significant volume expansion (>300%) during cycling, leading to severe capacity fade and limiting their commercial viability. Currently, silicon-based polymer-derived ceramics have emerged as a highly promising next-generation anode material for lithium-ion batteries, thanks to their unique nano-cluster structure, tunable composition, and low volume expansion characteristics. The maximum capacity of the ceramics can exceed 1000 mAh∙g⁻¹, and their unique synthesis routes enable customization to align with diverse electrochemical application requirements. In this paper, we present the progress of silicon oxycarbide (SiOC), silicon carbonitride (SiCN), silicon boron carbonitride (SiBCN) and silicon oxycarbonitride (SiOCN) in the field of LIBs, including their synthesis, structural characteristics and electrochemical properties, etc. The mechanisms of lithium-ion storage in the Si-based anode materials are summarized as well, including the key role of free carbon in these materials. Full article

As the global emphasis on sustainable development intensifies, the integration of digital technologies (DTs) into efforts to address the Sustainable Development Goals (SDGs) has gained increasing attention. However, existing research on the link between the SDGs and DTs remains fragmented and lacks a comprehensive perspective on their interconnections. We aimed to address this gap by conducting a large-scale bibliometric analysis based on Elsevier’s SDG research mapping technique. Drawing on approximately 1.17 million publications related to both the 17 SDGs and 11 representative DTs, we explored research trends in the SDG–DT association, identified DTs that are most frequently tied to specific SDGs, and uncovered emerging areas of research within this interdisciplinary domain. Our results highlight the rapid expansion in the volume and variety of SDG–DT studies. Our findings shed light on the widespread relevance of artificial intelligence and robotics, the goal-specific applications of technologies such as 3D printing, cloud computing, drones, and extended reality, as well as the growing visibility of emerging technologies such as digital twins and blockchain. These findings offer valuable insights for researchers, policymakers, and industry leaders aiming to strategically harness DTs to support sustainable development and accelerate progress toward achieving the SDGs. Full article

The shallow water equations (SWEs) model fluid flow in rivers, coasts, and tsunamis. Their nonlinearity challenges analytical solutions. We present a numerical algorithm combining the finite integration method with Chebyshev polynomial expansion (FIM-CPE) to solve one- and two-dimensional SWEs. The method transforms partial differential equations into integral equations, approximates spatial terms via Chebyshev polynomials, and uses forward differences for time discretization. Validated on stationary lakes, dam breaks, and Gaussian pulses, the scheme achieved errors below ${10}^{-12}$ for water height and velocity, while conserving mass with volume deviations under ${10}^{-5}$. Comparisons showed superior shock-capturing versus finite difference methods. For two-dimensional cases, it accurately resolved wave interactions over complex topographies. Though limited to wet beds and small-scale two-dimensional problems, the method provides a robust simulation tool. Full article

With the support of the dual-carbon strategy and related policies, China’s offshore wind power has experienced rapid development. However, constrained by the inherent intermittency and volatility of wind power, large-scale expansion poses significant challenges to grid integration and exacerbates government fiscal burdens. To address these critical issues, this paper proposes a multi-market coupling trading model integrating energy storage-equipped offshore wind power into electricity–carbon–green certificate markets for large-scale grid networks. Firstly, a day-ahead electricity market optimization model that incorporates energy storage is established to maximize power revenue by coordinating offshore wind power generation, thermal power dispatch, and energy storage charging/discharging strategies. Subsequently, carbon market and green certificate market optimization models are developed to quantify Chinese Certified Emission Reduction (CCER) volume, carbon quotas, carbon emissions, market revenues, green certificate quantities, pricing mechanisms, and associated economic benefits. To validate the model’s effectiveness, a gradient ascent-optimized game-theoretic model and a double auction mechanism are introduced as benchmark comparisons. The simulation results demonstrate that the proposed model increases market revenues by 17.13% and 36.18%, respectively, compared to the two benchmark models. It not only improves wind power penetration and comprehensive profitability but also effectively alleviates government subsidy pressures through coordinated carbon–green certificate trading mechanisms. Full article

Background: Postoperative recurrence of sacrococcygeal chordomas presents significant clinical challenges due to unusual recurrence patterns. This study aimed to characterize these patterns of recurrence to inform improved adjuvant radiotherapy planning. Methods: We retrospectively analyzed 31 patients with recurrent sacrococcygeal chordoma following surgery, assessing recurrence locations considering initial tumor extent, resection levels, and postoperative anatomical changes on MRI. In 18 patients, pre- and postoperative imaging enabled the spatial mapping of early recurrence origins relative to the initial tumor volume using isotropic expansions. The median initial gross tumor volume was 113 mL. Results: Recurrences were mostly multifocal and predominantly involved soft tissues (e.g., mesorectal/perirectal space (80.6%), piriformis and gluteal muscles (80.6% and 67.7%, respectively) and osseous structures, particularly the sacrum (87.1%)). The median time to recurrence was 15 months. The initial surgery was R0 in 17 patients (55%). The highest infiltrated sacral vertebra was S1 in 3%, S2 in 10%, S3 in 35%, S4 in 23%, S5 in 10%, and coccygeal in 19%. Anatomical changes post-resection, including rectal herniation into gluteal and subcutaneous tissues, significantly affected radiotherapy planning. Expansion of the initial tumor volume by 2 cm failed to encompass all recurrence origins in 72% of cases. A 5 cm expansion was required to achieve full coverage in 56% of patients, though 22% of recurrences still lay beyond this margin and the remaining were covered only partially. Conclusions: Recurrent sacrococcygeal chordomas exhibit complex, soft-tissue-dominant patterns and are influenced by significant anatomical displacement post-surgery. Standard target volume expansions are often insufficient to cover the predominantly multifocal recurrences. Full article

Wildlife–vehicle collisions (WVCs) remain a significant cause of animal mortality worldwide, particularly in regions experiencing rapid road network expansion. During the COVID-19 pandemic, a number of studies reported decreased WVC rates, attributing this trend to reduced traffic volumes. However, the validity of the simplified assumption that “fewer vehicles means fewer collisions” remains underexplored from a mechanistic perspective. This study aims to reevaluate that assumption using two simulation-based models that incorporate both the physics of vehicle movement and behavioral parameters of road-crossing animals. Employing an inverse modeling approach with quasi-realistic traffic scenarios, we quantify how vehicle speed, spacing, and animal hesitation affect collision likelihood. The results indicate that approximately 10% of modeled cases contradict the prevailing assumption, with collision risk peaking at intermediate traffic densities. These findings challenge common interpretations of WVC dynamics and underscore the need for more refined, behaviorally informed mitigation strategies. We suggest that integrating such approaches into road planning and conservation policy—particularly under the European Union’s ‘Vision Zero’ framework—could help reduce wildlife mortality more effectively in future scenarios, including potential pandemics or mobility disruptions. Full article

The proliferation of digital public service platforms and the expansion of e-government initiatives have significantly increased the volume and diversity of citizen-generated feedback. This trend emphasizes the need for classification systems that are not only tailored to specific administrative domains but also robust to the linguistic, contextual, and structural variability inherent in user-submitted content. This study investigates the comparative effectiveness of large language models (LLMs) alongside instruction-tuned embedding models in the task of categorizing public transportation complaints. LLMs were tested using a few-shot inference, where classification is guided by a small set of in-context examples. Embedding models were assessed under three paradigms: label-only zero-shot classification, instruction-based classification, and supervised fine-tuning. Results indicate that fine-tuned embeddings can achieve or exceed the accuracy of LLMs, reaching up to 90 percent, while offering significant reductions in inference latency and computational overhead. E5 embeddings showed consistent generalization across unseen categories and input shifts, whereas BGE-M3 demonstrated measurable gains when adapted to task-specific distributions. Instruction-based classification produced lower accuracy for both models, highlighting the limitations of prompt conditioning in isolation. These findings position multilingual embedding models as a viable alternative to LLMs for classification at scale in data-intensive public sector environments. Full article

Classical thermodynamics omits rigidity, which property distinguishes solids from gases and liquids. By accounting for rigidity (i.e., Young’s elastic modulus, ϒ), we recently amended historical formulae and moreover linked heat capacity, thermal expansivity, and ϒ. Further exploration is motivation by the importance of classical thermodynamics to various applied sciences. Based on heat performing work, we show here, theoretically, that density times sublimation enthalpy divided by the molar mass (ρΔH_sub/M, energy per volume), depends linearly on ϒ (1 GPa = 10⁹ J m⁻³). Data on diverse metals, non-metallic elements, chalcogenides, simple oxides, alkali halides, and fluorides with cubic structures validate this relationship at ambient conditions. Furthermore, data on hcp metals and molecular solids show that ρΔH_sub/M is proportional to ϒ for anisotropic materials. Proportionality constants vary only from 0.1 to 0.7 among these different material types (>100 substances), which shows that the elastic energy reservoir of solids is large. Proportionality constants depend on whether molecules or atoms are sublimated and are somewhat affected by structure. We show that ductility of refractory, high-ϒ metals affect high-temperature determinations of their ΔH_sub. Our results provide information on sublimation processes and subsequent gas phase reactions, while showing that elasticity of solids is the key parameter needed to assessing their energetics. Implications are highlighted. Full article

Background: Stress hyperglycemia (SH), a transient elevation in blood glucose levels during acute stress such as stroke, has been increasingly recognized as a critical determinant of clinical outcomes. This review aims to evaluate the association between SH and clinical outcomes across different stroke subtypes and its role as a prognostic indicator. Methods: The current literature review was conducted through a comprehensive literature search of PubMed, Scopus, and Web of Science electronic databases. Initial title and abstract screening was conducted by two independent reviewers depending on the relevance to the topic of interest. Final study inclusion was based on the clinical relevance and agreement between reviewers. Results: Current evidence links SH with higher stroke severity (Higher national institutes of health stroke scale (NIHSS)), larger infarct volumes, increased risk of hemorrhagic transformation, and worse functional recovery (Lower modified rankin scale (mRS)), especially in ischemic stroke. In hemorrhagic stroke, SH is associated with hematoma expansion, perihematomal edema, and worsening neurological function. Although SH has been shown to be a reliable stroke outcome predictor, there is no scientific consensus regarding the most reliable measurement method. The use of absolute blood glucose values may not accurately reflect SH, particularly in diabetic patients, where chronic baseline hyperglycemia complicates interpretation. This underscores the necessity for individualized assessment rather than a uniform interpretation. Clinically, the early detection of SH may provide enhanced monitoring and supportive care; however, rigorous glucose management remains contentious due to the risk of hypoglycemia. Conclusions: This review synthesizes evidence from recent studies and supports SH as a prognostic marker of both short- and long-term adverse outcomes in stroke patients. Further research is warranted to evaluate the efficacy of targeted glycemic treatments on such outcomes. Full article

In this paper, voxel-based Asymptotic Homogenization (AH) is employed to calculate the thermal expansion and thermal conductivity characteristics of lattice materials that have a Representative Volume Element (RVE) with non-orthogonal periodic bases. The non-orthogonal RVE of the cellular lattice is discretized using voxel elements (iso-parametric hexahedral element, on a cartesian grid). A homogenization framework is developed in python that uses a fast-nearest neighbor algorithm to approximate the (non-orthogonal) periodic boundary conditions of the discretized RVE. Validation studies are performed where results of the homogenized Thermal Expansion Coefficient (TEC) and thermal conduction performed in this paper are compared with results generated by commercially available software. These included comparison with the results for (a) bi-material unidirectional composite with orthogonal RVE cell envelope; (b) bi-material hexagon lattice with orthogonal cell envelope; (c) bi-material hexagon lattice with non-orthogonal cell envelope; and (d) bi-material square lattice. A novel approach of visualizing the contribution of each voxel towards the individual terms within the homogenized thermal conductivity matrix is presented, which is necessary to mitigate any potential errors arising from the numerical model. Additionally, the effect of the thermal expansion and thermal conductivity for bi-material hexagon lattice (orthogonal and non-orthogonal RVE cell envelope) are presented for varying internal cell angles and all permutations of material assignments for a relative density of 0.3. It is found that when comparing the non-orthogonal RVE with the Orthogonal RVE as a reference model, the numerical error due to approximating the periodic boundary condition for the non-orthogonal bi-material hexagon is generally less than 2% as the numerical error is pseudo-cyclically dependent on the discretization along the cartesian axis. Full article

Background: Adhesive capsulitis (AC) causes a global limitation of both active and passive range of motion (ROM) in the shoulder, with or without pain, and no specific radiographic findings. Its course is self-limiting and progresses through three or four stages. The diagnosis is primarily clinical, since imaging tests are nonspecific. Treatment options include physical therapy (PT), intra-articular corticosteroid injections, suprascapular nerve block (SSNB), and hydrodilatation (HD). The latter is useful for expanding and reducing inflammation of the joint capsule through the insufflation of saline solution, anesthetics, and corticosteroids. Objectives: To compare whether patients with AC, stratified by phase 1 and 2, who receive high-volume HD as treatment achieve better outcomes in terms of shoulder pain and function compared to patients who receive low-volume HD. To compare whether there are differences in PT times and to determine mean axillary recess (AR) values. Methods: A randomized, parallel-block, triple-blind clinical trial will be conducted in 64 patients with AC in phases 1 and 2, aged 30 to 70 years, with limited active and passive ROM in two planes, and shoulder pain lasting more than 3 months. HD will be administered with volumes of 20 mL or 40 mL, followed by a conventional rehabilitation program. Outcomes will be reviewed at the 1st, 3rd, and 6th months of HD. Variables collected will include Shoulder Pain and Disability Index (SPADI), Visual Analog Scale (VAS), Range of motion (ROM), Lattinen index (LI), AR size, and time to completion of PT. Results: HD has been gaining clinical relevance in interventional rehabilitation as a treatment for AC, although its medium- and long-term efficacy remains a matter of debate. The variability in the volumes used for capsular expansion, with studies ranging from 18 mL to 47 mL, is compounded by the fact that most of these studies do not differentiate between AC stages. This could influence treatment effectiveness. Furthermore, diagnosis remains a challenge since valid and specific diagnostic parameters are lacking. Conclusions: Understanding the differences between HD techniques, considering the influence of certain factors such as the volume used or the stages of AC, as well as improving diagnosis and the coordination of scientific work. This could facilitate the development of protocols for the use of HD in AC. Full article