Search Results (236)

The (3aS, 6aR)-lactone serves as the key chiral intermediate for the synthesis of d-biotin. A promising approach involves the asymmetric hydrolysis of meso-dimethyl ester catalyzed by an esterase to yield the (4S, 5R)-monomethyl ester, which is subsequently reduced and cyclized to afford (3aS, 6aR)-lactone. This study first optimized the fermentation medium and culture conditions for the recombinant E. coli pET21a-EstSIT01 harboring the Microbacterium esterase gene, which exhibits high selectivity for the asymmetric synthesis of (4S, 5R)-monomethyl ester. Under optimal conditions (fermentation medium: glycerol 25 g/L, yeast extract 15 g/L, NaCl 10 g/L, MgSO₄•7H₂O 5 g/L; induction was initiated 2 h post-inoculation at 30 °C and pH 7.2), the enzyme activity increased 5.1-fold compared to the initial level, reaching 1072.7 U/L. Secondly, the reaction conditions for the whole-cell synthesis of (4S, 5R)-monomethyl ester catalyzed by EstSIT01 were optimized. The results indicated that organic solvents adversely affected enzyme stability, while high buffer salt concentration negatively impacted enzyme activity at elevated substrate concentrations. The optimal reaction strategy involved maintaining the pH of the aqueous reaction system at 7.5 by the controlled addition of aqueous ammonia to neutralize the (4S, 5R)-monomethyl ester produced during the reaction. Using 17.5 g/L cells and 200 mM substrate meso-dimethyl ester in deionized water, with the reaction pH mentioned at 7.5, complete conversion (100%) was achieved within 4 h at 30 °C. The space–time yield reached 441.6 g/L/d, exceeding the typical requirement for industrial biotransformation (>100 g/L/d), with 99.1% enantiomeric excess (ee) of (4S, 5R)-monomethyl ester. Finally, (4S, 5R)-monomethyl ester was reduced using sodium borohydride to synthesize (3aS, 6aR)-lactone with an ee value of 98.7%. The overall yield from meso-dimethyl ester to (3aS, 6aR)-lactone was 86.2%. These results demonstrate that this integrated chemo-enzymatic approach constitutes a greener method with promising potential for industrial application. Full article

Chiral polymeric nanoparticles derived from protected L/D-Phe-OMe- and unprotected L/D-Phe-based monomers were developed as functional chiral coatings for PVDF membranes to induce enantioselective recognition. The present study introduced a sonochemichal-assisted approach to the deposition of Phe-based polymeric nanoparticles onto PVDF membranes, generating chiral membrane surfaces that can facilitate enantioselective transport and crystallization. The enantioselective performance of the modified membranes was evaluated through membrane transport experiments using DL-leucine and a crystallization investigation with DL-tyrosine. Enantioselective transport experiments showed pronounced chiral resolution, achieving an enantiomeric excess (ee) of 79/76% for D/L-Leu. Furthermore, enantioselective crystallization was demonstrated using DL-tyrosine in the presence of L/D-Phe-OMe-coated membranes. Optical activity measurements, supported by SEM and DSC analysis, confirm membrane-induced enantiomeric enrichment yielding an ee of 60/68% for L/D-Tyr. These results highlight the potential of chiral polymer-coated PVDF membranes as versatile platforms for enantioselective separation. Full article

All four isomers of 2-chloro-1-(6-fluorochroman-2-yl)ethan-1-ol, as building blocks for the two enantiomers of beta-blocker nebivolol, have been synthesized in high yield. Due to the similar physicochemical properties of these four diastereomeric halohydrins, to date, the only successful method for separation of the isomers has been preparative HPLC. To avoid this, the four halohydrins were transformed into epoxides with subsequent separation of the enantiomeric pairs by column chromatography. The enantiomeric pairs of epoxides were subsequently converted back to their corresponding halohydrins before performing kinetic resolution of the racemates catalyzed by Lipase B from Candida antarctica. (R)-2-Chloro-1-((R)-6-fluorochroman-2-yl)ethanol was isolated in 71% yield, and >99% enantiomeric excess (ee). (R)-2-Chloro-1-((S)-6-fluorochroman-2-yl)ethanol was isolated in 77% yield and >99% ee. Hydrolysis of 2-chloro-1-(6-fluorochroman-2-yl)ethyl butanoate with the same lipase yielded halohydrins (S)-2-chloro-1-((S)-6-fluorochroman-2-yl)ethanol and (S)-2-chloro-1-((R)-6-fluorochroman-2-yl)ethanol. Amination of (R)-6-fluoro-2-((S)-oxiran-2-yl)chromane with ammonia afforded (S)-2-amino-1-((R)-6-fluorochroman-2-yl)ethanol in 79% yield and >99% ee. (S)-2-Amino-1-((R)-6-fluorochroman-2-yl)ethanol was then reacted with (R)-2-chloro-1-((S)-6-fluorochroman-2-yl)ethanol to produce the desired product (R,S,S,S)-nebivolol ((−)-nebivolol) in 81% yield and >99% ee. Full article

The induction of chirality to obtain enantiopure products of high synthetic value is of great importance across various scientific fields, particularly in the medical area, as it has been demonstrated that the different enantiomers of drugs interact differently with biological receptors. In this context, asymmetric catalysis focuses on the design of catalysts that are easy to synthesize, capable of efficiently and enantioselectively forming C–C bonds, and suitable for reuse in multiple catalytic processes. This work describes the application of a Pd(II) complex coordinated with the R and S forms of proline in direct Aldol, Morita–Baylis–Hillman, and Heck coupling reactions. The catalytic system efficiently promoted the aldol reaction, achieving yields of 80–95%, excellent diastereoselectivities (1:69 syn/anti), and enantiomeric excesses greater than 99%. From a mechanistic perspective, the formation of a transition state is proposed in which a proline molecule generates an enamine that, upon coordination with the metal center, is stabilized through interaction with the intermediate’s double bond. Moreover, the study of the Morita–Baylis–Hillman and Heck coupling reactions highlights the versatility of this type of catalyst. Full article

G-quadruplex (G4) DNA structures have recently emerged as promising chiral scaffolds for enantioselective catalysis. This study investigates how thymidine loop modifications influence the catalytic performance of the telomeric G4 sequence HT21 in the asymmetric sulfoxidation of thioanisole. To this end, several singly or doubly modified HT21 derivatives were synthesized by using β-L-2′-deoxythymidine, 5-hydroxymethyl-2′-deoxyuridine, and 5-bromo-2′-deoxyuridine instead of a T residue, or β-L-2′-deoxyadonesine instead of an A residue, in specific positions within the TTA loops. The catalytic activity of these analogues was evaluated in the Cu(II)-mediated oxidation of thioanisole using hydrogen peroxide as oxidant. All modified sequences maintained complete substrate conversion, but their enantioselectivities varied markedly. Whereas the highest enantiomeric excess (84% ee) had previously been achieved with the HT21 analogue bearing a β-L-2′-deoxyadenosine in the first loop, the thymidine-based modifications, either alone or in combination, resulted in lower ee values, suggesting that loop alterations critically affect the chiral microenvironment, not all loop positions are functionally equivalent, and single substitutions within the same loop can result in different enantioselectivities. These findings highlight new insights on how individual loop residues contribute to asymmetric induction and offer further details for tuning G4-based catalytic scaffolds. Full article

The direct chlorination, bromination and azidation of beta keto esters, 2-acetyl-1-tetralone and methyl 1-oxo-2,3-dihydro-1H-indene-2-carboxylate is achieved utilizing anion-coordinated hypervalent iodine benziodazoles derived from hypervalent iodine macrocycles. This reaction, which introduces the halogen, azido or cyano group at the alpha carbon atom of beta keto esters, is accomplished in chloroform at 60 °C and results in the formation of a chiral center. Depending on the structure of the benziodazole reagent, the reaction can have mild enantioselectivity. The reaction between 2-acetyl-1-tetralone and phenylalanine-derived hypervalent iodine benziodazoles results in the chlorinated product with 26% enantiomeric excess. Full article

Objective: This study aimed to develop a stable and active biocatalytic system for enzyme immobilization, utilizing an electrospun support doped with a metal–organic framework (MOF) and supplemented with an ionic liquid as a lipase stabilizer and activity enhancer. Methodology: The system was applied for an efficient and enantioselective resolution of racemic citalopram. Key parameters, including MOF concentration, electrospinning and immobilization conditions, ionic liquid selection, and reaction time, were optimized to enhance biocatalyst performance. Results: The optimal immobilization time was determined to be 24 h, achieving 52% immobilization efficiency and 100% activity recovery. The resulting biocatalytic system HIGH PVC-MOF-lip-CA exhibited superior storage stability, retaining 80% of its initial activity, a 75% improvement over the free enzyme. In the resolution of citalopram, the system achieved 96% conversion of S-citalopram within 24 h, with the enantiomeric excess of 93% in favor of the S-ester over the R-ester. These findings demonstrate the system’s potential for efficient and stereoselective biocatalytic applications. Full article

The mixture of enantiomers in pharmaceuticals can lead to adverse effects, as demonstrated by thalidomide, where one enantiomer exhibited therapeutic properties while the other was teratogenic. Currently, efforts are focused on developing efficient catalysts capable of selectively producing a single stereoisomer, particularly in the synthesis of neuropharmaceuticals and NSAIDs. In this context, a new chiral catalyst was synthesized, featuring a palladium core and the dipeptide L-lysine-glycine as a ligand. The catalyst was characterized using various spectroscopic techniques and exhibited enantiomeric excesses of up to 40% in aldol reactions. Additionally, it efficiently promoted Heck cross-coupling reactions, indicating its potential catalytic versatility. Full article

The present research describes the chemical composition and the enantiomeric profile of a spicy green aroma essential oil, distilled from the dry leaves of Baccharis sinuata Kunth (Asteraceae). The distillation yield was as high as 3.0% by weight. The chemical analysis was conducted on two columns, coated with stationary phases of different polarity (5% phenyl—95% methyl polysiloxane, expressed by weight, and 100% polyethylene glycol). Major components (≥2.0% as an average value between the two columns) were as follows: β-pinene (4.9%), limonene (39.0%), (E)-β-caryophyllene (2.0%), bicyclogermacrene (2.7%), γ-cadinene (4.0%), δ-cadinene (7.3%), β-eudesmol (2.0%), α-eudesmol (3.0%), and α-cadinol (2.0%). For the enantioselective analysis, 10 enantiomeric pairs were investigated, using two capillary columns coated with different chiral selectors. As a result, (1R,5R)-(−)-α-thujene, (1S,5S)-(−)-α-pinene, and (1R,2S,6S,7S,8S)-(−)-α-copaene were enantiomerically pure, whereas (R)-(+)-limonene presented a 90.0% enantiomeric excess. All the other analysed chiral compounds were scalemic mixtures. The high distillation yield, its aroma, and the bibliographic bioactivity profile make this essential oil potentially interesting from a commercial point of view. To the best of the authors’ knowledge, this is the first description of an essential oil distilled from leaves of B. sinuata. Full article

A practical four-step sequence for the synthesis of α,δ-dioxoesters with high enantiomeric excess was developed. It makes use of a regio- and stereoselective Michael addition of a chiral ketimine to ethyl 2-(phenylthio)-2-propenoate as a key transformation. The synthetic elaboration of the Michael adduct provides the new ethyl 3-(1-methyl-2-oxo-cyclohexyl)-2-oxopropanoate, bearing a quaternary stereocenter with 95% ee and high yield. Full article

Roupala montana (Proteaceae) is a shrub native to subtropical and tropical regions of Central and South America. The EO extracted from R. montana was analyzed for its chemical composition and biological activities. GC analysis revealed that the essential oil has a chemically diverse composition, predominantly composed of oxygenated diterpenes (29.37%) and sesquiterpene hydrocarbons (7.81%). Phytol, with 21.17 ± 1.59%, was the major component. Enantioselective GC showed a high enantiomeric excess of (S)-(+)-γ-muurolene (95.07%) and enantiomeric purity of (1S,4aR,8aR)-(−)-γ-cadinene. Antimicrobial, antifungal, and antioxidant properties were assessed in the EO, comparing them with related species, highlighting its potential for targeted pharmaceutical and biotechnological applications. Full article

The growing need for developing safer and more effective methods for obtaining enantiomers of chiral compounds, particularly those with pharmacological activity, highlights the potential of biocatalysis as an appropriate pharmaceutical research direction. However, low catalytic activity and stability of free enzymes are often among the substantial limitations to the wide application of biocatalysis. Therefore, to overcome these obstacles, new technological procedures are being designed. In this study, we present optimized protocols for the immobilization of Candida antarctica lipase B (CALB) on an octyl- agarose support, ensuring high enantioselectivity in an organic reaction medium. The immobilization procedures (with drying step), including buffers with different pH values and concentrations, as well as the study of the influence of temperature and immobilization time, were presented. It was found that the optimal conditions were provided by citrate buffer with a pH of 4 and a concentration of 300 mM. The immobilized CALB on the octyl-agarose support exhibited high catalytic activity in the kinetic resolution of (R,S)-1-phenylethanol via enantioselective transesterification with isopropenyl acetate in 1,2-dichloropropane (DCP), as a model reaction for lipase activity monitoring on an analytical scale. HPLC analysis demonstrated that the (R)-1-phenylethyl acetate was obtained in an enantiomeric excess of ee_p > 99% at a conversion of approximately 40%, and the enantiomeric ratio was E > 200. Thermal and storage stability studies performed on the immobilized CALB octyl-agarose support confirmed its excellent stability. After 7 days of thermal stability testing at 65 °C in a climatic chamber, the (R)-1-phenylethyl acetate was characterized by enantiomeric excess of ee_p > 99% at a conversion of around 40% (similar values of catalytic parameters to those achieved using a non-stored lipase). The documented high catalytic activity and stability of the developed CALB-octyl-agarose support allow us to consider it as a useful tool for enantioselective transesterification in organic medium. Full article

A novel point-chiral six-membered cyclic phosphoric acid was synthesized starting from an enantiopure precursor via a concise three-step route. Its catalytic performance was evaluated in enantioselective three-component Mannich reactions. Under optimized conditions, the catalyst provided good yields and satisfactory enantiomeric excesses (up to 89%). The basic mechanism of the catalysis was also studied by the DFT method. Full article

Chiral covalent organic frameworks (COFs) hold great promise in heterogeneous asymmetric catalysis due to their designable structures and well-defined chiral microenvironments. However, precise control over the pore size of chiral COFs to optimize asymmetric catalytic performance remains challenging. Herein, we designed a proline-derived dihydrazide chiral monomer (L-DBP-Boc), which was subjected to Schiff-base reactions with two aromatic aldehydes of different lengths, 1,3,5-triformyl phloroglucinol (BTA) and 4,4′,4″-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde (TZ), to construct two hydrazone-linked chiral COFs with distinct pore sizes (L-DBP-BTA COF and L-DBP-TZ COF). Interestingly, the Boc protecting groups were removed in situ during COF synthesis. We systematically investigated the catalytic performance of these two chiral COFs in asymmetric aldol reactions and found that their pore sizes significantly influenced both catalytic activity and enantioselectivity. The large-pore L-DBP-TZ COF (pore size: 3.5 nm) exhibited superior catalytic performance under aqueous conditions at room temperature, achieving a yield of 98% and an enantiomeric excess (ee) value of 78%. In contrast, the small-pore L-DBP-BTA COF (pore size: 2.0 nm) showed poor catalytic performance. Compared to L-DBP-BTA COF, L-DBP-TZ COF demonstrated a 1.69-fold increase in yield and a 1.56-fold enhancement in enantioselectivity, possibly attributed to the facilitated diffusion and transport of substrates and products within the larger pore, thus improving the accessibility of active sites. This study presents a facile synthesis of pyrrolidine-functionalized chiral COFs and establishes the possible structure–activity relationship in their asymmetric catalysis, offering new insights for the design of efficient chiral COF catalysts. Full article

This study investigates the efficient and enantioselective hydrolysis of ester bonds through a series of biotransformations employing various photobiocatalysts. A racemic mixture of 1-phenylethyl acetate served as the model substrate. The described research identified three strains exhibiting the highest biocatalytic activity: Nostoc cf-muscorum (CCALA 129), Leptolyngbya foveolarum (CCALA 76), and Synechococcus bigranulatus (CCALA 187). Their application led to the complete hydrolysis of the starting reagent, yielding both the unreacted ester and its corresponding alcohol in an enantioselective manner. Notably, the selectivity, expressed as S, reached an impressive value of 283 in certain outcomes. The photobiotransformations were conducted under varying conditions, with particular focus on two essential parameters: the duration of the process, crucial for kinetically controlled reactions, and light exposure, critical for light-dependent organisms. The representative results highlight the efficacy of these biocatalysts. For instance, using Leptolyngbya foveolarum (CCALA 76), Nostoc cf-muscorum (CCALA 129), and Synechococcus bigranulatus (CCALA 187) facilitated the production of 1-(R)-phenylethanol with enantiomeric excesses (ee) of 89%, 88%, and 86%, respectively, at a conversion degree of approximately 50%. These processes also yielded an optically enriched mixture of the unreacted substrate, 1-(S)-phenylethyl acetate. Specifically, in the case of Leptolyngbya foveolarum (CCALA 76), the ee of the unreacted ester reached up to 98%. Light exposure emerged as a key factor influencing selectivity factor (S). Adjusting this parameter allowed us to achieve an E value of up to 283 for the formation of 1-(R)-phenylethanol with an ee > 99% when utilizing the Nostoc cf-muscorum (CCALA 129) strain. Furthermore, light intensity proved crucial for scaling up these processes. Significant results were obtained with Synechococcus bigranulatus, particularly at substrate concentrations ranging from 1 to 10 mM under limited exposure. Here, the conversion degree was 55%, the ee of the (R)-alcohol was 86%, and the selectivity factor (S) value was 21. Full article