Search Results (124)

The increasing resistance of Candida tropicalis to conventional antifungal agents has necessitated the development of effective, biocompatible alternatives derived from natural sources. Garlic (Allium sativum), known for its potent antimicrobial activity, contains 33 bioactive sulfur compounds, some of them being allicin, ajoene, and diallyl sulfides, that exhibit strong antifungal effects. However, the clinical application of garlic extract in pharmaceutical formulations remains limited due to its chemical instability, rapid degradation, and limited bioavailability. This review highlights recent advancements in pharmaceutical processing and particle engineering approaches to enhance the stability, delivery, and therapeutic efficacy of garlic extract-based antifungal formulations. Key strategies such as nanoparticle encapsulation, nanoemulsification, advanced drying techniques, and hydrogel-based delivery systems are discussed as effective approaches to enhance the stability and antifungal performance of garlic extract formulations. Special attention is given to hydrogel-based systems due to their excellent mucoadhesive properties, ease of application, and sustained release potential, making them ideal for treating localized C. tropicalis infections. The review also discusses formulation challenges and in vitro evaluation parameters, including minimum inhibitory concentration, minimum fungicidal concentration, and biofilm inhibition. By analyzing recent findings and technological trends, this review underscores the potential of garlic extract-based particle-engineered systems as sustainable and effective antifungal therapies. The scope of this review includes an in-depth evaluation of garlic extract-derived formulations, the application of particle processing technologies, and their translational potential in the design of next-generation antifungal delivery systems for managing C. tropicalis infections. Full article

Headwater streams comprise almost 90% of global river networks, and their microorganisms play critical roles in organic matter decomposition and nutrient cycling. These functions, however, are affected by recurrent drying and rewetting. This study examined spatial variation in microbial enzyme activity tied to organic carbon degradation (β-glucosidase, phenol oxidase, and peroxidase) and nitrogen (N-acetylglucosaminidase) and phosphorus (phosphatase) mineralization in water, epilithic biofilm, leaf litter, and sediment in two intermittent streams: Gibson Jack Creek (Idaho, USA) and Pendergrass Creek (Alabama, USA), representing different climactic and physiographic settings. Microbial activity was greater in Gibson Jack Creek, where the activity of leaf litter enzymes varied along the stream network, and there were strong correlations in microbial activity between different stream habitats. Microbial activity in Pendergrass Creek showed primarily within-habitat associations. Activity in water, sediment, and biofilm showed broader spatial heterogeneity in both stream networks. Ratios of microbial activity (enzyme stoichiometry) suggested that microbial communities in both systems were primarily limited by carbon and phosphorus, although there was more spatial variation in nitrogen limitation, particularly in water and sediment at Pendergrass Creek and in biofilm at Gibson Jack Creek. These findings underscore the spatial heterogeneity and environmental sensitivity of microbial processes in intermittent streams. Full article

Microplastics (MPs) are increasingly reported as contaminants in sewage sludge, with wastewater treatment plants retaining approximately 10³–10⁶ particles kg⁻¹ of dry sludge. Anaerobic digestion (AD), widely applied for sludge stabilization and energy recovery, does not consistently remove these particles; MPs frequently persist and, at elevated or sensitive loadings, have been shown to affect methane production, microbial communities and sludge quality. In parallel, thermal hydrolysis and related pretreatments are being implemented at full scale to enhance sludge biodegradability, exposing embedded MPs to high temperature and pressure prior to AD. This review compiles and analyzes experimental studies on MPs in sludge pretreatment and AD systems, with an emphasis on how pretreatment severity, MP type, particle size and concentration influence MP transformation and process performance. Reported data indicate that intensified pretreatment accelerates MP aging, causing fragmentation, oxidative surface modification and additive release, while subsequent AD generally induces limited further MP degradation but can be negatively affected through reduced methane yields, shifts in microbial consortia and altered behavior of co-contaminants. Mechanisms implicated include leaching of plastic additives, enhanced oxidative and physiological stress, and formation of plastisphere biofilms that perturb syntrophic interactions. Mitigation approaches, including optimized thermal hydrolysis–AD configurations and the use of carbonaceous sorbents, are assessed with regard to their effects on MP-associated inhibition and their practical constraints. Analytical limitations, uncertainties in MP mass balances and environmental fate, and key research needs for evaluating MP risks and designing MP-resilient sludge treatment and biosolid management strategies are identified. Full article

Rambutan (Nephelium lappaceum) shell, an agro-industrial by-product, is a rich source of phenolic acids and minor anthocyanins, but its direct use is limited by instability and low bioavailability. We extracted phenolic-rich fractions and produced maltodextrin microcapsules by spray drying, then confirmed chemical entrapment and amorphization by FTIR, SEM, and XRD. The formulation showed high encapsulation efficiency and high antioxidant capacity (DPPH), selective bactericidal activity against Pseudomonas aeruginosa and Burkholderia cepacia, and strong inhibition of Staphylococcus aureus and Listeria monocytogenes biofilms, while exhibiting negligible hemolysis (<2%) across tested concentrations. Antitumor effects were moderate with low selectivity in vitro, indicating that phenolic-acid-driven redox modulation may require fractionation or delivery optimization for oncology applications. Overall, spray-dried microcapsules provided structural stability and safety while concentrating multifunctional activities relevant to food and biomedical uses. By valorizing a tropical waste stream into a bioactive, hemocompatible ingredient, this work aligns with societal goals on health and sustainable production (SDG 3 and SDG 12) and offers a scalable route to deploy underutilized phenolic resources. Full article

In saline soil, legumes are restricted in their growth potential by osmotic stress, ion toxicity, and oxidative damage. We evaluated five halotolerant plant growth-promoting bacteria and selected Pseudomonas putida RT12 for its exceptional EPS production, tolerance to 600 mM NaCl, strong biofilm development, and plant growth-promoting traits (ACC-deaminase 2.86 µM·mg⁻¹; IAA 144 µM·mL⁻¹). RT12 was evaluated on two varieties of peas (peas2009 and 9800-10) with and without inoculation at 0, 75, and 150 mM NaCl concentrations. RT12 markedly protected growth under severe salinity: at 150 mM, shoot length rose to 23.13 cm (peas2009) and 17.44 cm (9800-10), in contrast to 11.18 cm and 12.32 cm in uninoculated specimens; root length and dry weight demonstrated comparable recovery (root length increased from 11.00 to 22.25 cm; dry weight of peas2009 from 0.15 to 0.17 and 0.41 to 0.71 g). RT12 sustained photosynthesis (total chlorophyll increased from 43.5 to 54.5), enhanced relative water content (to 94.1% and 97.2%), elevated osmolytes (total soluble proteins rose from 7.34 to 18.12 µg·g⁻¹ FW; total soluble sugars increased from 19.1 to 41.3 mg·g⁻¹ FW), and augmented antioxidant activities (catalase increased from 2.11 to 4.70; superoxide dismutase rose from 1.20 to 4.83; peroxidase increased from 0.08 to 0.18), while reducing malondialdehyde/hydrogen peroxide levels. RT12 was significant as it inhibited the accumulation of Na⁺ (from 23.95 to 16.32 mg·g⁻¹ DW), elevated K⁺ levels (from 17.76 to 29.12 mg·g⁻¹ DW), and restored the K⁺/Na⁺ ratio to normal (from 0.74 to 1.59) in inoculated plants compared to non-inoculated ones. A multivariate analysis linked growth protection to ionic homeostasis, osmotic control, and the detoxification of reactive oxygen species (ROS). RT12 is a promising bioinoculant for cultivating peas in saline-affected soils. Full article

Filtrate from dewatering anaerobically digested biosolids is a side-stream of wastewater treatment that contains high concentrations of nitrogen and phosphorus compounds that can serve as nutrients for cultivating microalgae biomass as biofilms for bioproduct production at Water Resource Recovery Facilities (WRRFs). One system used to cultivate attached microalgae biofilms is the rotating algal biofilm reactor (RABR). A pilot RABR with 72 m² growth surface area, 11.5 m² footprint area, and a liquid volume of 11,500 L was operated in an outdoor environment at the largest WRRF in Utah, U.S.A, the Central Valley Water Reclamation Facility (CVWRF). The configuration of the RABR was altered from the previous configuration with regard to temperature and duty cycle with the goal to maximize biomass productivity. Results included an increase in dry biomass productivity on a footprint basis from 8.8 g/m²/day to 26.8 g/m²/day (205%) while power requirements changed from 28.3 W to 91 W. The increase in biomass productivity has direct benefits for bioproducts including bioplastic, biofertilizer, and the extraction of lipids for conversion to biofuels. Full article

Background/Objectives: Dental plaque, a biofilm composed of accumulated oral microorganisms, is a key contributor to various oral diseases. 6-shogaol, a bioactive compound of ginger, is known to have pharmacological activities, including anticancer, anti-inflammatory, and antimicrobial activities. Therefore, we aimed to determine the effects of 6-shogaol on dual-species biofilms of Streptococcus mutans (S. mutans) and Candida albicans (C. albicans). Methods: Dual-species oral biofilms were formed on hydroxyapatite (HA) disks for 42 h and exposed to 6-shogaol. The pH was measured in the experimental medium, and the biomass, colony-forming unit (CFU) of microbial cells, and insoluble extracellular polysaccharides (EPS) were quantified in the biofilm formed on the HA disk. Confocal laser scanning microscopy (CLSM) was used to assess biofilm morphology, and quantitative polymerase chain reaction was performed to analyze gtf gene expression. Results: 6-shogaol dose-dependently reduced insoluble EPS, CFU counts, and dry weight of biofilms. The pH was maintained above 5.5 in the 6-shogaol-treated group. CLSM images showed that S. mutans proliferation, C. albicans hyphal development, and EPS production were markedly inhibited in biofilms treated with 6-shogaol. The expression of gtfB and gtfC was significantly downregulated by 6-shogaol. Conclusions: These findings suggest that 6-shogaol has the potential to be a promising natural product for the prevention and management of oral biofilm-related oral diseases. Full article

Background: The addition of chlorhexidine in dental restorative materials is a promising strategy to reduce the recurrence of tooth decay lesions. However, the main challenge is to develop materials with antimicrobial activity in the long term. Objective: This study analyses the effect of filler type and concentration of resin composites supplemented with chlorhexidine loaded in carrier montmorillonite particles (MMT/CHX) regarding their chemical, physical, and short- and long-term antimicrobial proprieties. Materials: Experimental composites were synthesized with 0, 30, or 60% filler in two ratios, 70/30 and 80/20, of barium glass/colloidal silica, respectively, and 5 wt% MMT/CHX. Conversion was measured using near Fourier-transform infrared spectrometry. Sorption and solubility were determined by specimen weight before and after drying and immersing in water. Flexural strength (FS) and elastic modulus (E) were determined by three bending tests using a universal test machine. Chlorhexidine release was monitored for 50 days. Streptococcus mutans UA159 was used in all microbiological assays. Inhibition halo assay was performed for 12 months and, also, biofilm growth for the specimens and colony-forming unit (CFU). Remineralization assay was used on restored teeth using measurements of microhardness Knoop and CFUs. Results: Conversion, sorption, and solubility were not affected by filler type and concentration. FS and E increase with the filler concentration, independent from filler type. Chlorhexidine was significantly released for 15 days for all experimental materials, and the increase in filler concentration decreased its release. Halo inhibition was observed for a longer time (12 months) in materials with 60 wt% filler at 70/30 proportion. Also, 60 wt% filler materials, independent from the filler ratio, reduced the CFU in relation to the control group from 8 to 12 months. In the remineralization assay, besides the absence of differences in hardness among the groups, after biofilm growth, the CFU was also significantly lower in materials with 60 wt% filler. Conclusions: Materials with 60% filler, preferentially with 70% barium glass and 30% silica, and 5% MMT/CHX particles demonstrated long-term antimicrobial activity, reaching 12 months of effectiveness. Also, this formulation was associated with higher mechanical properties and similar conversion, sorption, and solubility compared to the other materials. Full article

Background/Objectives: There are many commercial mouthrinses, used for a variety of purposes, including antiseptic activity. The objective of this study was to determine the antibacterial activity of various TheraBreath™ oral rinses against the cariogenic bacterium, Streptococcus mutans, and saliva-derived microbial communities, and their antibiofilm activity against S. mutans in vitro biofilms. Methods: Bactericidal activity against planktonic S. mutans was assessed by colony counting after 30 and 2 min exposures to mouthrinses. Ten saliva samples were exposed to mouthrinses for 30 s and plated aerobically on blood agar and Mitis Salivarius agar. Mature biofilms of S. mutans were treated with mouthrinses for 15 min followed by fluorescent vitality staining and polysaccharide measurement, followed by crystal violet staining for measurement of total biofilm remaining. Statistical analysis was performed using Kruskal–Wallis with Dunn’s multiple comparisons test comparing all mean ranks (α = 0.05). Results: TheraBreath™ Fresh Breath, Healthy Smile, and Dry Mouth exhibited no significant antibacterial activity. TheraBreath™ Healthy Gums showed antibacterial activity against S. mutans and microbes from saliva samples similar to Listerine^® Naturals at all exposure times. Whitening Fresh Breath showed intermediate killing of S. mutans after 30 min in liquid but not after 2 min or against salivary microbes. Live/Dead fluorescence vitality staining showed that Healthy Gums and Whitening Fresh Breath had antibacterial activity against mature biofilms of S. mutans statistically similar to Listerine^® Naturals and Colgate^® Total; however, Whitening Fresh Breath did not have significant killing compared to PBS. Conclusions: TheraBreath™ Healthy Gums demonstrated similar antiseptic activity levels to other antiseptic-claiming commercial rinses. Whitening Fresh Breath was comparable but unable to kill in short exposure times. Full article

Bacterial diseases are a major constraint to aquaculture productivity, driving extensive antibiotic use and raising concerns over antimicrobial resistance, environmental contamination, and food safety. Curcumin, a polyphenolic compound from Curcuma longa, exhibits broad-spectrum antimicrobial and immunomodulatory activities but is limited by poor water solubility, instability, and low bioavailability. This review was conducted through a literature search of Scopus, PubMed, Web of Science, and Google Scholar using targeted keywords, including curcumin nanoparticles, antibacterial, aquatic pathogens, nanotechnology, synthesis, and disease control. Titles and abstracts were screened for relevance, followed by full-text evaluation of selected studies. Key findings were critically analyzed and incorporated into the review. Findings from the literature indicate that curcumin nanoparticles, synthesized via milling, anti-solvent precipitation, ionic gelation, emulsification, spray drying, and metal/polymer nanocomposite formation, exhibit enhanced antibacterial activity against aquatic pathogens, including Aeromonas hydrophila, Vibrio parahaemolyticus, Escherichia coli, and Staphylococcus aureus. Optimally engineered curcumin nanoparticles (<100 nm, being mostly spherical, highly negatively charged) can penetrate bacterial membranes, disrupt biofilms, lower minimum inhibitory concentrations, and improve in vivo fish survival. Practical applications include dietary supplementation to boost fish immunity and growth, water disinfection to reduce pathogen loads, immersion therapy for external infections, and antimicrobial coatings for aquaculture equipment and surfaces, resulting in reduced infections and outbreaks, reduced mortality, improved water quality, and decreased antibiotic dependence. In conclusion, curcumin nanoparticles and curcumin-based nanocomposites present a versatile, eco-friendly approach to sustainable aquaculture disease management. However, further field-scale validation, safety assessment, and cost-effective production methods are necessary to enable commercial adoption. Full article

Accumulation of copper (Cu) in soils devoted to intensive agriculture due to anthropogenic additions is becoming a significant threat to plant productivity. Biological inoculants may play an important role in alleviating toxic effects of heavy metals on plants. The plant-growth-promoting rhizobacteria (PGPR) Bacillus subtilis subsp. spizizenii has demonstrated the ability to reduce harmful impacts of heavy metals on crops. This study aimed to evaluate the suitability of seed inoculation with biofilm produced by this bacterium to mitigate the severity of Cu toxicity on tomato. In the laboratory, first, B. subtilis was cultivated under increased Cu concentrations. Then, germination of inoculated and non-inoculated tomato seeds was tested for Cu concentrations of 0, 50, 100, 150, and 200 ppm. Next, a greenhouse experiment was conducted for four months to assess the effects of both inoculation and excess 150 ppm Cu in the substrate. The studied treatments included control, no inoculation and Cu surplus, inoculation and no Cu surplus, and inoculation plus Cu surplus. In the laboratory, first, the bacterium’s ability to grow in a liquid medium containing Cu was confirmed. Thereafter, we verified that the germination of non-inoculated seeds was negatively affected by Cu, with higher concentrations leading to a more detrimental effect. However, seed inoculation with biofilm mitigated the adverse impact of Cu on germination. Under greenhouse conditions, excess Cu significantly reduced root dry weight, tomato number, and tomato yield compared with the control, whereas shoot dry weight, plant height, leaf area, and soluble solid concentration (Brix index) did not experience significant changes (p < 0.05). However, seed inoculation mitigated the toxic effects of excess Cu, significantly enhancing all the aforementioned plant parameters, except plant height. Seed inoculation also significantly reduced the Cu contents in the fruits of tomato plants growing in the metal contaminated substrate. The biofilm of the B. subtilis strain used demonstrated its effectiveness as a bioinoculant, attenuating the detrimental effects induced by a substrate with excess Cu. Full article

Bovine mastitis, particularly that caused by Staphylococcus aureus, presents a major challenge to dairy production worldwide due to its economic impact, animal welfare concerns, and zoonotic potential. This narrative review synthesizes current literature on the epidemiology, pathogenesis, resistance patterns, and control strategies related to S. aureus-associated mastitis in dairy cattle. It highlights the pathogen’s virulence mechanisms, such as biofilm formation, immune evasion, and toxin production, that facilitate persistent infections. The review compiles global prevalence data, revealing significant geographic variation and disparities between clinical and subclinical cases. Antimicrobial resistance, especially the emergence of methicillin-resistant S. aureus (MRSA), is extensively examined alongside resistance gene profiles. Diagnostic approaches, including culture, PCR, MALDI-TOF MS, and AI-based systems, are evaluated for their sensitivity and field applicability. Additionally, the review addresses public health implications, zoonotic risks, and One Health perspectives, culminating in an exploration of prevention strategies, including improved hygiene, vaccination, dry cow therapy, and AI-driven herd management. The findings emphasize the urgent need for integrated surveillance, precision diagnostics, and targeted interventions to mitigate the burden of S. aureus mastitis. Full article

Chronic lung infection is the main predictor of morbidity and mortality in cystic fibrosis (CF), and current pharmacological alternatives are ineffective against Pseudomonas aeruginosa infections. We developed ciprofloxacin (CIP) for inhalation, aiming at improving its solubility through the formation of an amorphous solid dispersion (ASD) using gelatin (GA). CIP and GA were dissolved in varying ratios and then spray-dried, obtaining CIP-GA microspheres in a single step. The dissolution rate, size distribution, morphology, and aerodynamic properties of CIP-GA microspheres were studied, as well as their antimicrobial activity on P. aeruginosa biofilms. Microspheres formulated with a higher GA ratio increased the dissolution of CIP ten-fold at 6 h compared to gelatin-free CIP. Formulations with 75% GA or more could form ASDs and improve CIP’s dissolution rate. CIP-GA microspheres outperformed CIP in eradicating P. aeruginosa biofilm at 24 h. The spray-drying process produced CIP-GA microspheres with good aerodynamic properties, as indicated by a fine particle fraction (FPF) of 67%, a D₅₀ of 3.52 μm, and encapsulation efficiencies above 70%. Overall, this study demonstrates the potential of gelatin to enhance the solubility of poorly soluble drugs by forming ASDs. As an FDA-approved excipient for lung delivery, these findings are valuable for particle engineering and facilitating the rapid translation of technologies to the market. Full article

This study investigated the essential oils (EOs) from leaf, bark, and fruit of Mespilodaphne cymbarum (Kunth) Trofimov (Lauraceae), focusing on their chemical composition and antimicrobial and antibiofilm activities. EOs were extracted from plants collected in the Amazon during dry and flood seasons and analyzed by gas chromatography–mass spectrometry. Although chemical differences were evident among plant organs and chemotypes, the influence of seasonality was not pronounced. Fruit EO was dominated by α- and β-santalene and limonene. Bark EO was rich in phenylpropanoids, including methyl eugenol, myristicin, and elemicin. Leaf EO showed the greatest metabolic diversity, with chemotype-specific variations. Leaf and bark EOs demonstrated superior antibacterial and antibiofilm activities compared to fruit EO, especially against Gram-positive bacteria such as Staphylococcus epidermidis, Staphylococcus aureus, and Micrococcus luteus. Chemotype-1 leaf and bark EOs inhibited S. epidermidis biofilm formation, while chemotype-2 reduced bacterial growth. The leaf EOs from both chemotypes reduced bacterial growth against S. aureus, and bark EO decreased biofilm formation. All leaf and bark EOs showed antibiofilm activity against M. luteus. These findings highlight the potential of M. cymbarum EOs as natural sources of bioactive compounds and emphasize the importance of chemotype and plant organ selection for optimized applications. Full article

With the rapid development of the livestock farming industry, the treatment of livestock farming wastewater has become increasingly important. The microbial-algal biofilm method has gained widespread attention for cattle wastewater treatment owing to its non-toxic nature, resistance to shock loading, and high treatment efficiency. In this study, three types of substrates—polyurethane sponge, ceramic material, and moving bed biofilm reactor media—were evaluated. The formation of biofilms was assessed through variations in chlorophyll content, microscopic observations, and measurements of biofilm dry weight and attachment rate. Biofilm characterization on the different substrates was conducted via Fourier transform infrared spectroscopy, confocal laser scanning microscopy, and scanning electron microscopy. The results demonstrated that polyurethane sponge was the most effective substrate. Furthermore, a single-factor experiment was conducted to optimize the cultivation conditions for the microbial-algal biofilms and identify the optimal parameters based on the ability of the biofilm to remove COD, TN, TP, and NH₄⁺-N. The optimal conditions were as follows: an illumination intensity of 8000 lux, red light, a temperature of 20 °C, a pH of 7, and an aeration intensity of 8 L/min. Under these conditions, the pollutant removal rates were exceptionally high: ~73.4% for COD, 51.8% for TP, 57.0% for TN, and 75.1% for NH₄⁺-N. Full article