Search Results (19)

Essential oils (EOs) constitute intricate mixtures of volatile phytochemicals that have garnered significant attention due to their multifaceted biological effects. Notably, the presence of bioactive constituents capable of inhibiting tyrosinase enzyme activity and scavenging reactive oxygen species (ROS) underpins their potential utility in skin-related applications, particularly through the modulation of melanin biosynthesis and protection of skin-relevant cells from oxidative damage—a primary contributor to hyperpigmentation disorders. Zingiber officinale Rosc. (ginger) and Humulus lupulus L. (hop) are medicinal plants widely recognized for their diverse pharmacological properties. To the best of our knowledge, this study provides the first report on the synergistic interactions between essential oils derived from these species (referred to as EOZ and EOH) offering novel insights into their combined bioactivity. The purpose of this study was to evaluate essential oils extracted from ginger rhizomes and hop strobiles with respect to the following: (1) chemical composition, determined by gas chromatography–mass spectrometry (GC-MS); (2) tyrosinase inhibitory activity; (3) capacity to inhibit linoleic acid peroxidation; (4) ABTS^•+ radical scavenging potential. Furthermore, the study utilizes both the combination index (CI) and dose reduction index (DRI) as quantitative parameters to evaluate the nature of interactions and the dose-sparing efficacy of essential oil (EO) combinations. GC–MS analysis identified EOZ as a zingiberene-rich chemotype, containing abundant sesquiterpene hydrocarbons such as α-zingiberene, β-bisabolene, and α-curcumene, while EOH exhibited a caryophyllene diol/cubenol-type profile, dominated by oxygenated sesquiterpenes including β-caryophyllene-9,10-diol and 1-epi-cubenol. In vitro tests demonstrated that both oils, individually and in combination, showed notable anti-tyrosinase, radical scavenging, and lipid peroxidation inhibitory effects. These results support their multifunctional bioactivity profiles with possible relevance to skin care formulations, warranting further investigation. Full article

Hop latent viroid (HLVd), a 256-nucleotide RNA strand with complementary base-pairing and internal stem loop structures, forms circular or rod-shaped molecules within diseased plants. RT-PCR/RT-qPCR was used to assess HLVd transmission, spread and longevity. The viroid was detected in asymptomatic stock plants and in rooted vegetative cuttings, as well as in recirculated nutrient solution sampled from propagation tables and nozzles. Plant-to-plant spread through root infection in hydroponic cultivation was demonstrated. The viroid survived for 7 days and 4 weeks, respectively, in crushed leaf extracts (sap) or dried leaves/roots at room temperature. Following stem inoculation with infectious sap, HLVd was detected in root tissues within 2–3 weeks and in the foliage within 4–6 weeks. Plants grown under a 12:12 h photoperiod to induce inflorescence development showed more rapid spread of HLVd compared to 24 h lighting. The viroid was subsequently detected in inflorescence tissues, in trichome glands, in dried cannabis flowers and in crude resinous oil extracts. Anthers and pollen from infected male plants and seeds from infected female plants contained HLVd, giving rise to up to 100% infected seedlings. Artificially inoculated tomato and tobacco plants supported viroid replication in roots and leaves. Infected cannabis leaf and root tissues treated with UV-C for 3–5 min or temperatures of 70–90 °C for 30 min contained amplifiable HLVd-RNA. Infectious plant extract treated with 5–10% bleach (0.825% NaOCl) or 1000 ppm hypochlorous acid yielded no RT-PCR bands, suggesting the RNA was degraded. Meristem tip culture from HLVd-infected plants yielded a high frequency of pathogen-free plants, depending on the genotype. Full article

Three elastomer samples were prepared using GS530SP01K1 silicone rubber (ProChima). The samples included pure silicone rubber (SR), a silicone rubber-graphene composite (SR-GR), and a silicone rubber-magnetite composite (SR-Fe₃O₄). The magnetite was synthesized via chemical precipitation but was not washed to remove residual ions. The dielectric response and electrical conductivity of these samples were analyzed across a frequency range of 500 Hz to 2 MHz. The analysis of the complex dielectric permittivity and Cole–Cole plots indicated a mixed dielectric response, combining dipolar behavior and charge carrier hopping. Despite this mixed response, electrical conductivity followed Jonscher’s power law, with the exponent values (0.5 < n < 0.9) confirming the dominance of electron hopping over dipolar behavior in SR-GR and SR-Fe₃O₄ samples. The SR-Fe₃O₄ sample demonstrated higher dielectric permittivity and electrical conductivity than SR-GR, even though graphene is inherently more conductive than magnetite. This discrepancy is likely due to the presence of residual ions on the magnetite surface from the chemical precipitation process as the magnetite was only decanted and dried without washing. These findings suggest that the ionic residue significantly influences the dielectric and conductive properties of the composite. Full article

Currently, the leaves of the hop plant (Humulus lupulus L.) are an unexploited and still little-investigated agricultural by-product. In our study, with the aim of exploring the metabolome of dried hop leaves (Chinook cultivar), a metabolomic approach was applied using multiple analytical tools such as SPME/GC–MS, GC–MS, PTR-ToF-MS, and NMR to identify the secondary metabolites. The obtained results showed the presence of a high number of components belonging to different chemical classes. In fact, thanks to the multi-methodological approach, volatile organic compounds (VOCs) with low molecular weight, terpenic compounds, fatty acids, sugars, amino acids, organic acids, and alcohols have been detected and identified. Among the revealed terpenes in the untreated matrix, the sesquiterpenes α-humulene, β-caryophyllene, and α-copaene were the most abundant. Among the saturated and unsaturated fatty acids, palmitic and linolenic acids, respectively, were those with the highest relative percentages. Particularly relevant was the sugar content, where sucrose was the main exponent while glutamate and asparagine were the principal detected amino acids. Conversely, alcohols and organic acids were the least abundant compound classes, and xanthohumol was also identified in the methanolic extract. Full article

The utilization of coffee leaves and flowers has been underestimated over the years. Both by-products can be obtained from coffee trees without adversely affecting the production of coffee beans. To gain fundamental knowledge of their sensorial and aroma profiles, it becomes essential to reintroduce them into the food chain. Accordingly, 24 different coffee leaf samples generated from diverse processing as well as 38 varied species of coffee flowers were analyzed for their sensory characteristics by descriptive analysis and liking tests, and their corresponding aroma profiles were decoded by means of gas chromatography–mass spectrometry–olfactometry. For the coffee leaves, a wide range of different flavors could be detected in the sensory evaluation. The fermented coffee leaf samples clearly showed more sweetish and fruity aroma notes compared to the intense green and vegetable aroma of the non-fermented samples. β-Ionone (honey-like), decanal (citrus-like, floral), α-ionone (floral), octanal (fruity), and hexanal (green) were identified as key volatile compounds but distributed in different ratios. In the predominant coffee flowers, hay-like, hop-like, sage-like, dried apricot-like, and honey-like impressions were identified as major aroma descriptors in addition to a basic floral note. 2-Heptanol (fruity), 2-ethylhexanol (green), nerol (floral), and geraniol (floral) were identified as representative aroma compounds. All in all, a great variety of flavors was detected from the coffee leaves and flowers, which will not only provide an insight into the potential applications for the food market (i.e., coffee leaf tea and coffee flower tea) but will also help make coffee growing more sustainable. Full article

In this study a multi-residue determination method for 36 pesticides in dried hops was reported. The sample preparation procedure was based on the acetate buffered QuEChERS method. A few mixtures of dispersive solid phase extraction (dSPE) sorbents consisting PSA, C₁₈, GCB, Z-Sep and Z-Sep+ were investigated to clean-up the supernatant and minimize matrix co-extractives. The degree of clean-up was assessed by gravimetric measurements, which showed the best results for mixtures containing the Z-Sep+ sorbent. This is the first study to apply Z-Sep+ sorbent for hops material and the first to improve the method for pesticide residues determination in hops. Samples were analysed using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) and the procedure was validated according to the SANTE/11813/2017 document at four concentration levels: 0.02, 0.05, 0.1 and 1 mg/kg. The limits of quantification (LOQ) were in the range of 0.02–0.1 mg/kg. For all active substances, the trueness (recovery) ranged from 70 to 120% and the precision (RSD_r) value was <20%. Specificity, linearity and matrix effect were also evaluated. The validated method was applied to the analysis of 15 real dried hop samples and the relevant data on detected residues were included. Full article

Total phenolic content using Folin–Ciocalteu method, antioxidant capacity by CUPRAC method and sun protection properties were measured for four different extracts of selected plants: marigold petals, carrot roots, tomato fruits and hop cones. Three types of extracts: water, oil and water-glycolic (1:4) were studied. Assessment of sun protection properties for extracts obtained from selected plants was first done by mathematical indication method and subsequently done spectrophotometrically. In a method of mathematical indication of UV protection based on absorption spectra, four parameters were determined regarding sun protection properties at different concentrations of selected plant extracts. Absorbance generally increased with an increase of concentration of extracts, but an expected increase of particular parameters was not obtained in all samples. The water-glycolic extract from hop cones was characterized by the highest content of phenolic compounds (among all studied samples) and high antioxidant activity. It also showed high radiation protection. Data for four parameters like UVA/UVB parameter, UVA1/UV parameter, SUI parameter and critical wavelength was generated, and the three first parameters were the highest for water and water-glycolic extracts of marigold. Among all plants, hop cones were characterized by the highest SPF for all types of extracts. SPF values increased with the concentration of extracts, but an increase of the weight of dried plants used to prepared extracts did not influence sun protection factor. Full article

There is an increased interest in identifying beneficial compounds of plant origin that can be added to animal diets to improve animal performance and have a health-promoting effect. In the present study, nine herb species of the Norwegian wild flora or which can be cultivated in Norway were selected for phytogenic evaluation (hops, maral root, mint, oregano, purslane, rosemary, roseroot, sweet wormwood, yarrow). Dried herbs were sequentially extracted with dichloromethane (DCM), ethanol (EtOH) and finally water (H₂O) by ultrasound-assisted extraction (UAE). The UAE protocol was found to be more rational than conventional Soxhlet with respect to DCM extraction. Total extraction yield was found to be highest for oregano (Origanum vulgare) with 34.4 g 100⁻¹ g dry matter (DM). H₂O-extracts gave the highest yields of the three solvents, with up to 25 g 100⁻¹ g DM for purslane (Portulaca oleracea ssp. sativa) and mint (Mentha piperita). EtOH- and H₂O-extracts were the most efficient extracts with respect to free radical scavenging capacity (ABTS (=2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid), and oregano, mint, hops (Humulus lupulus) and maral root-leaves (Leuzea carthamoides) were found to be the most efficient antioxidant sources. Hops (EtOH-extract) contained α- and β-acids, xanthohumols, chlorogenic acid and the hitherto unreported 3-O-glucosides of kaempferol and quercetin. Maral root-leaves contained among other compounds hexosides of the 6-hydroxy- and 6-methoxy-kaempferol and -quercetin, whereas roseroot (Rosea rhodiola) revealed contents of rosavin, rhodiosin and rhodionin. Sweet wormwood (Artemisia annua) contained chlorogenic acid and several derivatives thereof, scopoletin and poly-methylated flavones (eupatin, casticin, chrysoplenetin). Antimicrobial potential of different plant extracts was demonstrated against Gram-positive and Gram-negative bacteria using the indicator organisms Staphylococcus aureus, and Escherichia coli, and the Atlantic salmon bacterial pathogens Moritella viscosa, Tenacibaculum finnmarkense and Aliivibrio wodanis. DCM extracts possessed the highest activities. Data demonstrate the potential ability of herb extracts as natural antimicrobials. However, future safety studies should be performed to elucidate any compromising effect on fish health. Full article

The use of the flowers (blossoms) of the coffee plant (genus Coffea) has been neglected over the years, as the focus has primarily been on the cost-efficient production of coffee beans. Because of societal changes and economic pressures, there is an increasing demand for sustainability, so the focus has also widened towards the various by-products of the coffee production. The coffee flower is a by-product because it can be harvested following pollination without any risk to the bean production. The coffee flower can be used as a whole or as floral water in some food and cosmetic products. The flower can also be prepared as a tea-like beverage with hot water infusion. Another side-chain product in coffee plantations is the so-called coffee flower honey, which is rarely monofloral due to the short flowering period. To date, there have been few studies on coffee flowers and their sensory characterization. In this work, various compounds in Coffea arabica, C. canephora, and C. liberica flowers were identified and quantified by high-performance liquid chromatography (HPLC) with diode array detection (DAD), nuclear magnetic resonance spectroscopy (NMR), and near-infrared (NIR) spectroscopy. Caffeine, chlorogenic acids, organic acids, trigonelline, and sugars were quantified. Additionally, the sensory testing of coffee flower infusions according to the German norm DIN 10 809 was performed. With the acquired data, a principal component analysis (PCA) was performed in which hay, hops, sage, dried apricot, and honey were identified as major flavor descriptors in addition to the floral coffee flower flavors. The coffee flower is judged as a promising ingredient, which needs to be further assessed regarding its possible approval within the novel food regulations of the European Union. Full article

Hop (Humulus lupulus L.) is grown mainly for the production of beer. The flowers of the female plant give it the bitter taste and pungent aroma. There are a large number of hop varieties differing in their α-acid content, essential oil levels and odor profiles. Aside from their use in brewing, more recently, hops have been used for the pharmacological properties of its derivatives that are of great importance to the pharmaceutical industry. Hop is known to have a fairly complex chemistry characterized by the presence of a variety of sesquiterpenoids, diterpenoids and triterpenoids, phytoestrogens and flavonoids. Additionally, considering the countless applications in the pharmacological sector in recent years, a chemical characterization of the different cultivars is essential to better identify the source of specific secondary metabolites. For this purpose, the dried inflorescences of two hop cultivars, Chinook and Cascade, were investigated using Solid-Phase Microextraction-Gas Chromatography-Mass Spectrometry and Liquid Chromatography-Tandem Mass Spectrometry (SPME-GC-MS and LC-MS-MS) to describe their metabolomic and proteomic profile. Furthermore, thanks to an in-depth statistical survey, it was possible to carry out a comparative study highlighting interesting implications deriving from this investigative study. Full article

In this work, selections of seven international hop varieties and three craft beers obtained from them were analyzed by SPME-GC/MS techniques with the aim to describe their volatile chemical profile. The brewing process was also reported. Furthermore, the hop extracts and beers were investigated to determine their flavonoid and polyphenol content and to evaluate their antioxidant power by DPPH and ABTS assays. The findings showed the presence of compounds belonging to different chemical classes such as monoterpenes, sesquiterpenes, alcohols, esters and fatty acids. In particular, sesquiterpenes were the main compounds with β-caryophyllene (from 1.7 to 16.2%) and humulene (from 10.8 to 43.9%) as the major components in all varieties of dried hop cones investigated. On the contrary, with the exception for the Pacific sample, monoterpenes were the class of compounds that were more abundant in the hop extracts and, among these, β-myrcene appeared to be the predominant constituent (from 31.8 to 71.4%). Regarding the craft beers obtained by adding these hop varieties, some differences in the qualitative and quantitative volatile composition have been found. All hop samples showed a high scavenging potential against both radicals. In the case of DPPH, the obtained IC₅₀ values ranged from 0.027 to 0.047 mg/mL while they varied between 0.023 and 0.134 mg/mL by the ABTS assay. A positive correlation was found with polyphenol and flavonoid contents. Among beer samples, ACD was the richest one in polyphenols (292.0 mg GAE/100 mL beer) and flavonoids (5.8 mg QE/100 mL beer) and the most powerful against DPPH• and ABTS•+ radicals with IC₅₀ values equal to 4.969 and 0.198 v/v%, respectively. Full article

In hop cultivation, one-third of the crop is a valuable product (hop cones), and two-thirds is unexploited biomass, consisting mainly of leaves and stems, which, in a circular economy approach, can be recovered and, once stabilized, supplied to industrial sectors, such as cosmetics, pharmaceuticals and phytotherapy, with high added value. In this regard, this study aimed to investigate the effects of two different drying methods: oven drying (OD) at 45 °C and freeze-drying (FD), on the overall nutraceutical profile (i.e., total phenols, total flavans and total thiols), pigment content (i.e., carotenoids and chlorophylls) and the antioxidant potential of leaves from five different Humulus lupulus varieties grown in central Italy. Moreover, attenuated total reflectance infrared (ATR-FTIR) spectroscopy was applied to dried leaf powders to study the influence of both the variety and treatment on their molecular fingerprints. The spectral data were then analyzed by principal component analysis (PCA), which was able to group the samples mainly based on the applied treatment. Considering the overall phytochemical profile, FD appeared to be the most suitable drying method, while OD provided higher carotenoid retention, depending on the genotype considered. Finally, unsupervised chemometric tools (i.e., PCA and hierarchical clustering) revealed that the two main clusters contained subclusters based on the drying treatment applied; these subgroups were related to the susceptibility of the variety to the drying conditions studied. Full article

Gene amplification techniques such as polymerase chain reaction (PCR) are widely used for the diagnosis of plant diseases caused by viruses and viroids. It is preferable that sample preparation methods for PCR or reverse transcription (RT) PCR are rapid, straightforward, and inexpensive. We previously reported a method for the extraction of nucleic acids without mechanical tissue grinding using a buffer containing potassium ethyl xanthogenate (PEX) to detect viroid RNAs. In the present report, the previous PEX method was improved and simplified. In the simplified PEX (SPEX) method, the process of PEX buffer treatment for plant cell wall disruption is improved to one step of incubation at 80 °C for 10 min, instead of three steps that took more than 26 min at 65 °C in the previous method. Total nucleic acids could be extracted from fresh, frozen, or dried leaves of a cultivar or wild species of tobacco, tomato, citron, hop plants, and pericarps of persimmon fruits by the SPEX method. Several RNA viruses and viroids were successfully detected from the extracted nucleic acids together with an internal mRNA by RT-PCR. The SPEX method may be useful for detecting not only viruses and viroids, but also other plant pathogens. Full article

Interest in essential oils has consistently increased in recent years. Essential oils have a large variety of applications in multiple fields, including in the food, cosmetics and pharmaceutical industries. The volatile fraction (VF) in hops (Humulus lupulus L.) fits within this domain as it is primarily used in the brewery industry for the aromatization of beer, and is responsible for the floral and fruity tones. This work aims to design an optimized extraction protocol of the VF from hops, using microwaves. Microwave-assisted hydrodistillation (MAHD) has been developed to reduce energy and time consumption in lab-scale reactors up to industrial-scale systems. Hops are principally available in three forms, according to a brewery’s applications: (i) fresh (FH); (ii) dried (DH) and (iii) pelletized (PH). In this work, all three forms have therefore been studied and the recovered volatiles characterized by means of GC-MS. The optimized lab-scale MAHD protocol gave the best extraction yield of 20.5 mL_VF/kg_{dry matrix} for FH. This value underwent a slight contraction when working at the highest matrix amount (3 kg), with 17.3 mL_VF/kg_{dry matrix} being achieved. Further tests were then performed in a pilot reactor that is able to process 30 kg of material. In this case, high yield increases were observed for PH and DH; quadruple and double the lab-scale yields, respectively. In addition, this industrial-scale system also provided marked energy savings, practically halving the absorbed kJ/mL_VF. Full article

Nanocrystalline nickel manganite (NiMn₂O₄) powder with a pure cubic spinel phase structure was synthesized via sol-gel combustion and characterized with XRD, FT-IR, XPS and SEM. The powder was mixed with sodium alginate gel to form a nano-biocomposite gel, dried at room temperature to form a thick film and characterized with FT-IR and SEM. DC resistance and AC impedance of sensor test structures obtained by drop casting the nano-biocomposite gel onto test interdigitated PdAg electrodes on an alumina substrate were measured in the temperature range of 20–50 °C at a constant relative humidity (RH) of 50% and at room temperature (25 °C) in the RH range of 40–90%. The material constant obtained from the measured decrease in resistance with temperature was determined to be 4523 K, while the temperature sensitivity at room temperature (25 °C) was −5.09%/K. Analysis of the complex impedance plots showed a dominant influence of grains. The decrease in complex impedance with increase in temperature confirmed the negative temperature coefficient effect. The grain resistance and grain relaxation frequency were determined using an equivalent circuit. The activation energy for conduction was determined as 0.45 eV from the temperature dependence of the grain resistance according to the small polaron hopping model, while the activation energy for relaxation was 0.43 eV determined from the Arrhenius dependence of the grain relaxation frequency on temperature. Full article