Search Results (99)

A novel type of multifunctional hybrid membranes combining modified chitosan, functionalized multi-walled carbon nanotubes (MWCNTs), and rare earth element ion-imprinted polymers (REEIIPs) were designed and characterized. The synthesized materials were characterized by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), vibrating sample magnetometry (VSM), X-ray diffraction (XRD), X-ray micro-tomography, and Fourier transform infrared spectroscopy (FTIR). The hybrid membranes were also studied in terms of their mechanical and rheological properties. The key element of the proper preparation of hybrid membranes using the casting method in an external magnetic field was to synthesize membrane components with appropriate magnetic properties. It was found that they showed tunable weak ferromagnetic properties, and the increase in modified nanotube addition caused the rise in the membrane’s saturation magnetization, which for Nd-selective hybrid membranes reached 0.44 emu/g. Also, the increase in thermooxidative stability was noted after introducing functionalized nanotubes into polymer matrices, which, in the case of Gd-selective membranes, were stable even up to 730 °C. The rise in the modified MWCNT addition and selection of appropriate REE ion-imprinted polymers improved mechanical (Rm and E values increase even twice) and rheological parameters (almost double growth of E′ and E″ values) of the tested membranes. Synthesized hybrid membranes showed a high rejection of matrix components and an increase in retention ratio with rising MWCNT-REEIIP addition, ultimately reaching 94.35%, 92.12%, and 90.11% for Nd, Pr, and Gd, respectively. The performed analysis confirmed homogeneous dispersion, phase compatibility, network integration, formation of a complex 3D microstructure, and improved operational stability of created hybrid membranes, which is significant for their future applications in Nd, Pr, and Gd recovery from coal fly ash extracts. Full article

The progressive commercial deployment of multi-walled carbon nanotubes (MWCNTs) raises concerns about their terrestrial ecotoxicity. We exposed adult Cornu aspersum (150 snails; five replicates of three animals per time-point) to 50 mg L⁻¹ MWCNT-dosed Lactuca sativa for 30 days and quantified five mechanistic biomarkers alongside survival. Hemocyte spread-cell area increased by 48% (from 243 ± 22 µm² at day 0 to 360 ± 18 µm² at day 14, p < 0.001). Lysosomal membrane stability (neutral red retention) fell twofold within 72 h and to 10 min by day 30 (controls ≈ 60 min), indicating early, persistent destabilization. Micronucleus frequency rose above the ecogenotoxic threshold of 5‰ after 7 days, peaking at 8.3 ± 0.7‰ on day 14 (p < 0.01). Hepatopancreas metallothionein concentrations doubled by day 3 (2.1 ± 0.3 vs. 1.0 ± 0.2 µg g⁻¹ ww in controls) and remained >150% of control throughout exposure, consistent with metal impurity mobilization. Acetylcholinesterase activity in cephalic tissue declined by 50% after 7 days and by 73% after 30 days, revealing sustained neurotoxicity. Despite these pronounced sub-individual disturbances, cumulative mortality reached only 19% at day 30, suggesting substantial, but finite, physiological compensation. Collectively, the data demonstrate that a 50 mg L⁻¹ dietary load of MWCNTs elicits rapid cytotoxic, genotoxic, and neurotoxic responses in C. aspersum that precede overt lethality, underscoring the utility of this gastropod and the chosen biomarker suite for monitoring nanotube contamination in agro-ecosystems and food-grade snail farming. Full article

A supercapacitor’s energy storage capability is greatly dependent on electrode materials. Layered double hydroxides (LDHs) were extensively studied as battery-type electrodes because of their 2D structure and quick intercalation/deintercalation of electrolyte ions. However, the energy storage capability for pristine LDHs is limited by their large aggregation tendency and poor electrical conductivity. Herein, a novel NiCoMn-LDH/SWCNTs (single-walled carbon nanotubes) composite electrode material, with ultrathin NiCoMn-LDH nanosheets dispersedly grown among the highly conductive networks of SWCNTs, was prepared via a facile zeolitic imidazolate framework-67 (ZIF-67)-derived in situ etching and deposition procedure. The NiCoMn-LDH/SWCNTs electrode demonstrates a specific capacitance as large as 1704.3 F g⁻¹ at 1 A g⁻¹, which is ascribed to its exposure of more active sites than NiCoMn-LDH. Moreover, the assembled NiCoMn-LDH/SWCNTs//BGA (boron-doped graphene aerogel) hybrid supercapacitor exhibits a superior capacitance of 167.9 F g⁻¹ at 1.0 A g⁻¹, an excellent energy density of 45.7 Wh kg⁻¹ with a power density of 700 W kg⁻¹, and an outstanding cyclic stability with 82.3% incipient capacitance maintained when subjected to 5000 charge and discharge cycles at the current density of 10 A g⁻¹, suggesting the significant potential of NiCoMn-LDH/SWCNTs as the electrode material applicable in supercapacitors. Full article

A number of viral diseases have significantly impeded the growth of the aquaculture industry. Antiviral drugs represent an effective means of controlling infection. However, the efficacy of the entire therapeutic process is contingent upon the availability of an efficient delivery system. This study selected three common antiviral drugs and constructed corresponding drug delivery systems utilising single-walled carbon nanotubes (SWCNTs) as carriers. The reliability of carbon nanotubes as delivery carriers was evaluated by detecting the therapeutic effect on infectious splenic and renal necrosis virus (ISKNV). The findings demonstrated that SWCNTs can effectively enhance the absorption of the three drugs into the body, prolong their metabolic half-life, and improve the survival rate of fish infected with ISKNV. The Ribavirin-SWCNTs (RBV-SWCNTs) group exhibited the most pronounced protective effect, with a mortality rate of less than 25%. It was observed that SWCNTs facilitated the rapid transportation of ribavirin, with the drug content in the RBV-SWCNTs group being approximately double that of the free ribavirin group. Furthermore, this system markedly diminished the viral load, augmented enzyme activities, and elevated antiviral gene expression. This study indicated that carbon nanotubes are optimal carriers for antiviral drugs, which have considerable potential as a delivery vehicle for antiviral drugs to prevent viral infections in aquaculture. Full article

This study delves into the distinctive selective property exhibited by a non-conjugated cholesterol-based polymer, poly(CEM₁₁-b-EHA₇), in sorting semiconducting single-walled carbon nanotubes (s-SWCNTs) within isooctane. Comprised of 11 repeating units of cholesteryloxycarbonyl-2-hydroxy methacrylate (CEM) and 7 repeating units of 2-ethylhexyl acrylate (EHA), this non-conjugated polymer demonstrates robust supramolecular interactions across the sp² surface structure of carbon nanotubes and graphene. When coupled with the Double Liquid-Phase Extraction (DLPE) technology, the polymer effectively segregates s-SWCNTs into the isooctane phase (nonpolar) while excluding metallic SWCNTs (m-SWCNTs) in the water phase (polar). DLPE proves particularly efficient in partitioning larger-diameter s-SWCNTs (0.85–1.0 nm) compared to those dispersed directly in isooctane by poly(CEM₁₁-b-EHA₇) using direct liquid-phase exfoliation (LPE) techniques for diameters ranging from 0.75 to 0.95 nm. The DLPE method, bolstered by poly(CEM₁₁-b-EHA₇), successfully eliminates impurities from s-SWCNT extraction, including residual metallic catalysts and carbonaceous substances, which constitute up to 20% of raw HiPCO SWCNTs. DLPE emerges as a scalable and straightforward approach for selectively extracting s-SWCNTs in nonpolar, low-boiling-point solvents like alkanes. These dispersions hold promise for fabricating fast-drying s-SWCNT inks, which are ideal for printed and flexible thin-film transistors. Full article

The development of ISE-based sensors for the analysis of nitrates in liquid phase is described in this work. Focusing on the tetradodecylammonium nitrate (TDDAN) ion exchanger as well as on fluoropolysiloxane (FPSX) polymer-based layers, electrodeposited matrixes containing double-walled carbon nanotubes (DWCNTs), embedded in either polyethylenedioxythiophene (PEDOT) or polypyrrole (PPy) polymers, ensured improved ion-to-electron transducing layers for NO₃⁻ detection. Thus, FPSX-based pNO₃-ElecCell microsensors exhibited good detection properties (sensitivity up to 55 mV/pX for NO₃ values ranging from 1 to 5) and acceptable selectivity in the presence of the main interferent anions (Cl⁻, HCO₃⁻, and SO₄²⁻). Focusing on the temporal drift bottleneck, mixed results were obtained. On the one hand, relatively stable measurements and low temporal drifts (~1.5 mV/day) were evidenced on several days. On the other hand, the pNO₃ sensor properties were degraded in the long term, being finally characterized by high response times, low detection sensitivities, and important measurement instabilities. These phenomena were related to the formation of some thin water-based layers at the polymer–metal interface, as well as the physicochemical properties of the TDDAN ion exchanger in the FPSX matrix. However, the improvements obtained thanks to DWCNT-based ion-to-electron transducing layers pave the way for the long-term analysis of NO₃⁻ ions in real water-based solutions. Full article

Double-walled carbon nanotube-yttria-stabilized ZrO₂ nanocomposites are prepared by a mixing route followed by Spark Plasma Sintering. The double-walled carbon nanotubes (DWCNTs) have been previously subjected to a covalent functionalization. The nanocomposites present a high densification and show a homogenous dispersion of DWCNTs into a matrix about 100 nm in size. The DWCNTs are well distributed at the matrix grain boundaries but form larger bundles upon the increase in carbon content. The Vickers microhardness of the nanocomposites decreases regularly upon the increase in carbon content. Incorporation of carbon at contents higher than 2 wt.% results in significantly lower friction coefficients, both against alumina and steel balls, possibly because of the elastic deformation of the DWCNTs at the surface of the sample. Their presence also favors a reduction of the steel/ceramic contacts and reduces the wear of the steel ball at high loads. DWCNTs improve wear resistance and reduce friction without incurring any severe damage, contrary to multi-walled carbon nanotubes. Full article

The rapid development of electronic communication technology has led to an undeniable issue of electromagnetic pollution, prompting widespread attention from researchers to the study of electromagnetic shielding materials. Herein, a simple and feasible method of melt blending was applied to prepare iPP/TPU/MWCNT nanocomposites with excellent electromagnetic shielding performance. The addition of maleic anhydride-grafted polypropylene (PP-g-MAH) effectively improved the interface compatibility of iPP and TPU. A double continuous structure within the matrix was achieved by controlling the iPP/TPU ratio at 4:6, while the incorporation of multi-walled carbon nanotubes endowed the composites with improved electromagnetic shielding properties. Furthermore, by regulating the addition sequence of raw materials during the melt-blending process, a selective distribution of carbon nanotubes in the TPU matrix was achieved, thereby constructing interconnected conductive networks within the composites, significantly enhancing the electromagnetic shielding performance of iPP/TPU/MWCNTs, which achieved a maximum EMI shielding efficiency of 37.8 dB at an iPP/TPU ratio of 4:6 and an MWCNT concentration of 10 wt.%. Full article

In this study, the behavior of double-walled carbon nanotubes (DWCNTs) used as mass sensors is explored under various boundary conditions; particular attention is paid to the crucial topic of resonant nanomechanical mass sensors. In the presented approach, nanotubes are subjected to a distributed transverse magnetic force and supported by an elastic foundation. The impacts of the longitudinal magnetic field, elastic medium, and diverse physical parameters on the responsiveness of the sensors are assessed. Using the energy method, governing equations are formulated to determine the frequency shifts of the mass nanosensors. Our findings reveal significant variations in the frequency shifts due to a longitudinal magnetic field, which depends on the applied boundary conditions. This research holds significance in the design of resonant nanomechanical mass sensors and provides valuable insights into the interplay of factors affecting their performance. Through exploring the intricate dynamics of DWCNTs used as mass sensors and thus contributing to the broader understanding of nanoscale systems, the implications for advancements in sensor design are offered and applications are introduced. Full article

An all-integrated on-chip electrochemical microcell (10 × 11 mm²) is developed using silicon technology. The potentiometric nitrate ion detection is based on the functionalization of the working microelectrode array with a polymer membrane in fluoropolysiloxane (FPSX) containing ionophore tetradodecylammoniumnitrate (TDDAN) and ionic additive potassium tetrakis[3,5-bis(trifuoromethyl)phenyl]borate (KTFPB) to form an all-solid-state ion selective electrode (ISE). The addition of an ion-to-electron transducing layer between the platinum working electrode and the polymer membrane helped to improve the sensor performances, especially the response time, the sensitivity, and the stability. Composites formed with two conductive polymers were compared: Polyethylenedioxythiophène (PEDOT) and Polypyrrole (PPy), doped with Poly(styrene sulfonate) or double-walled carbon nanotubes (DWCNTs). Full article

The paper concerns the dynamics and stability of double-walled carbon nanotubes conveying fluid. The equations of motion adopted in the current study to describe the dynamics of such nano-pipes stem from the classical Bernoulli–Euler beam theory. Several additional terms are included in the basic equations in order to take into account the influence of the conveyed fluid, the impact of the surrounding medium and the effect of the van der Waals interaction between the inner and outer single-walled carbon nanotubes constituting a double-walled one. In the present work, the flow-induced vibrations of the considered nano-pipes are studied for different values of the length of the pipe, its inner radius, the characteristics of the ambient medium and the velocity of the fluid flow, which is assumed to be constant. The critical fluid flow velocities are obtained at which such a cantilevered double-walled carbon nanotube embedded in an elastic medium loses stability. Full article

Carbon nanomaterials are promising adsorbents for dye removal from wastewater also due to their possible surface functionalization that, in principle, can increase the adsorption rate and provide regeneration. To investigate the real advantages of functionalization, we synthesized and characterized through IR, TGA, TEM, XPS and DLS measurements a multi-walled carbon nanotube (MWCNT) derivative bearing benzenesulfonate groups (MWCNT-S). The obtained material demonstrated to have good dispersibility in water and better capability to adsorb methylene blue (MB) compared to the pristine MWCNT adsorbent. Adsorption kinetic studies showed a very fast process, with a constant significantly higher with respect not only to that of the unfunctionalized MWCNT adsorbent but also to those of widely used activated carbons. Moreover, the adsorption capacity of MWCNT-S is more than doubled with respect to that of the insoluble pristine MWCNT adsorbent, thanks to the dispersibility of the derivatives, providing a larger available surface, and to the possible electrostatic interactions between the cationic MB and the anionic sulfonate groups. Additionally, the reversibility of ionic interactions disclosed the possibility to release the adsorbed cationic pollutant through competition with salts, not only regenerating the adsorbent, but also recovering the dye. Indeed, by treating the adsorbed material for 1 h with 1 M NaCl, a regeneration capacity of 75% was obtained, demonstrating the validity of this strategy. Full article

The present study aims to offer new numerical solutions and optimisation strategies for the fluid flow and heat transfer behaviour at a stagnation point through a nonlinear sheet that is expanding or contracting in water-based hybrid nanofluids. Most hybrid nanofluids typically use metallic nanoparticles. However, we deliver a new approach by combining single- and multi-walled carbon nanotubes (SWCNTs-MWCNTs). The flow is presumptively steady, laminar, and surrounded by a constant temperature of the ambient and body walls. By using similarity variables, a model of partial differential equations (PDEs) with the magnetohydrodynamics (MHD) effect on the momentum equation is converted into a model of non-dimensional ordinary differential equations (ODEs). Then, the dimensionless first-order ODEs are solved numerically using the MATLAB R2022b bvp4C program. In order to explore the range of computational solutions and physical quantities, several dimensionless variables are manipulated, including the magnetic parameter, the stretching/shrinking parameter, and the volume fraction parameters of hybrid and mono carbon nanotubes. To enhance the originality and effectiveness of this study for practical applications, we optimise the heat transfer coefficient via the response surface methodology (RSM). We apply a face-centred central composite design (CCF) and perform the CCF using Minitab. All of our findings are presented and illustrated in tabular and graphic form. We have made notable contributions in the disciplines of mathematical analysis and fluid dynamics. From our observations, we find that multiple solutions appear when the magnetic parameter is less than 1. We also detect double solutions in the shrinking region. Furthermore, the increase in the magnetic parameter and SWCNTs-MWCNTs volume fraction parameter increases both the skin friction coefficient and the local Nusselt number. To compare the performance of hybrid nanofluids and mono nanofluids, we note that hybrid nanofluids work better than single nanofluids both in skin friction and heat transfer coefficients. Full article

This work develops a three-dimensional (3D) weak formulation, based on the consistent couple stress theory (CCST), for analyzing the size-dependent dynamic instability behavior of simply-supported, functionally graded (FG) cylindrical microshells that are subjected to combinations of periodic axial compression and external pressure. In our formulation, the microshells are artificially divided into n_l layers. The displacement components of each individual layer are selected as the primary variables, which are expanded as a double Fourier series in the in-plane domain and are interpolated with Hermitian C² polynomials in the thickness direction. Incorporating the layer-wise displacement models into our weak formulation, we develop a Hermitian C² finite layer method (FLM) for addressing the current issue. The accuracy and the convergence rate of our Hermitian C² FLM are validated by comparing the solutions it produces with the accurate two-dimensional solutions of critical loads and critical pressures of FG cylindrical macroshells and single-walled carbon nanotubes, which were reported in the literature. The numerical results show the effects of the material length-scale parameter, the inhomogeneity index, the radius-to-thickness and length-to-radius ratios, the load magnitude ratio, and the static and dynamic load factors on the first principal and first secondary instability regions of parametric resonance of simply-supported FG cylindrical microshells are significant. Full article

In this paper, we present a scheme for generating terahertz (THz) radiation using an array of parallel double-walled carbon nanotubes (DWCNTs) subjected to a direct current (DC). The longitudinal surface plasmon polaritons (SPPs) in the DWCNTs are coherently excited by two near-infrared laser beams with slightly different frequencies. Through numerical methods, we investigate the spectral characteristics of the SPPs in the presence of a DC current in the nanotubes. We identify high-quality plasmonic modes with a slowdown factor exceeding 300 in the terahertz frequency region. The amplification of these slow SPP modes is facilitated by the DC current in the DWCNTs, fulfilling a synchronism condition. This condition ensures that the phase velocity of the SPPs is closely matched to the drift velocity of the charge carriers, allowing for an efficient energy exchange between the current and the surface electromagnetic wave. The high-frequency currents on the nanotube walls in the DWCNT array enable the emission of THz radiation into the far field, owing to an antenna effect. Full article