Search Results (315)

In South Korea, sunlight rights and daylight rights are legally distinguished, yet no standardized methodology exists for their quantitative assessment. Current evaluations of sunlight rights are narrowly defined, relying on the duration of direct solar penetration at the window center during the winter solstice, while excluding reflected and diffuse light. This restrictive approach has led to confusion among both researchers and legal practitioners, as it diverges from daylighting evaluations that account for indoor brightness and energy performance. The recent enactment of regulations to secure solar access in schools has further intensified disputes between educational institutions striving to protect students’ visual comfort and developers seeking to maximize building potential. To address this gap, this study proposes an evaluation framework tailored to the Korean context. A reference classroom model representative of standard Korean schools was developed, and simulations were conducted by introducing obstructing building masses to block direct sunlight. The methodology evaluated key variables, including time of day and solar altitude, and analyzed daylighting performance and lighting-related energy consumption under obstructed conditions. The results show that blocking sunlight through south-facing windows reduces daylighting performance by 89% to 98%, leading to additional reliance on artificial lighting, with energy use increasing between 128 Wh and 768 Wh. These findings underscore the limitations of current legal interpretations based solely on sunlight duration and highlight the necessity of adopting performance-based evaluation methods. Protecting school sunlight rights through such approaches is essential to enhancing classroom visual environments and reducing energy demand. Full article

Accurate modeling of non-cooperative space targets remains a significant challenge, particularly under complex illumination conditions. A hybrid virtual–real framework is proposed that integrates photometric compensation, 3D reconstruction, and visibility determination to enhance the robustness and accuracy of monocular-based modeling systems. To overcome the breakdown of the classical photometric constancy assumption under varying illumination, a compensation-based photometric model is formulated and implemented. A point cloud–driven virtual space is constructed and refined through Poisson surface reconstruction, enabling per-pixel depth, normal, and visibility information to be efficiently extracted via GPU-accelerated rendering. An illumination-aware visibility model further distinguishes self-occluded and shadowed regions, allowing for selective pixel usage during photometric optimization, while motion parameter estimation is stabilized by analyzing angular velocity precession. Experiments conducted on both Unity3D-based simulations and a semi-physical platform with robotic hardware and a sunlight simulator demonstrate that the proposed method consistently outperforms conventional feature-based and direct SLAM approaches in trajectory accuracy and 3D reconstruction quality. These results highlight the effectiveness and practical significance of incorporating virtual space feedback for non-cooperative space target modeling. Full article

The fabrication of plasmonic nanostructures with precise geometries and scalable production remains a critical challenge for advancing light–matter interaction technologies in applications such as sensing, photonics, and thermal management. Here, we present a versatile, self-assembly-based strategy for metallic nanoring fabrication. We extend Hole-mask Colloidal Lithography (HCL) by employing ring-shaped holes to produce nanorings via direct current (DC) magnetron sputtering. The process relies entirely on industry-standard thin-film techniques, enabling wafer-scale integration. Using this approach, we fabricate copper (Cu) nanorings with tunable near-infrared (NIR) resonances suitable for thermoplasmonic applications. The thermoplasmonic performance of these nanorings is evaluated under direct sunlight, revealing efficient photon-to-heat conversion. Nanorings displayed enhanced heating, outperforming nanodisks of equivalent size, with maximum surface temperatures reaching approximately 37 °C, an increase of over 13 °C above ambient, in contrast to the 6 °C increase shown by disks that reached a temperature of 30 °C. This superior performance is attributed to the nanoring geometry, which promotes stronger light absorption and localized heating. Overall, our results demonstrate that Cu nanorings represent a robust and scalable plasmonic platform with significant potential for solar-driven technologies and thermal management applications. Full article

The study focuses on the detection of breaking wave crests in the highly dynamic waters of an Antarctic coastal polynya using high-resolution panchromatic satellite imagery. Accurate assessment of whitecap coverage is crucial for improving our understanding of the interactions between wave generation, air–sea heat exchange, and sea ice formation in these complex environments. As open-ocean whitecap detection methods are inadequate in coastal polynyas partially covered with frazil ice, we discuss an approach that exploits specific lighting conditions: the alignment of sunlight with the dominant wind direction and low solar elevation. Under such conditions, steep breaking waves cast pronounced shadows, which are used as the primary indicator of wave crests, particularly in frazil streak zones. The algorithm is optimized to exploit these conditions and minimize false positives along frazil streak boundaries. We applied the algorithm to a WorldView-2 image covering different parts of Terra Nova Bay Polynya (Ross Sea), a dynamic polar coastal zone. This case study demonstrates that the spatial distribution of detected breaking waves is consistent with ice conditions and wind forcing patterns, while also revealing deviations that point to complex wind–wave–ice interactions. Although quantitative validation of satellite-derived whitecaps coverage was not possible due to the lack of in situ data, the method performs reliably under a range of conditions. Limitations of the proposed approach are pointed out and discussed. Finally, the study highlights the risk of misinterpretation of lower-resolution reflectance data in areas where whitecaps and sea ice coexist at subpixel scales. Full article

The pressing global transition to sustainable energy has intensified interest in overcoming the efficiency bottlenecks of conventional solar technologies. Hybrid photovoltaic–thermoelectric generator (PV–TEG) systems have recently emerged as a compelling solution, synergistically harvesting both electrical and thermal energy from solar radiation. By converting both sunlight and otherwise wasted heat, these integrated systems can substantially enhance total energy yield and overall conversion efficiency—mitigating the performance limitations of standalone PV panels. This review delivers a comprehensive, systematic assessment of maximum-power-point tracking (MPPT) methodologies specifically tailored for hybrid PV–TEG architectures. MPPT techniques are meticulously categorized and critically analyzed within the following six distinct groups: conventional algorithms, metaheuristic approaches, artificial intelligence (AI)-driven methods, mathematical models, hybrid strategies, and novel emerging solutions. For each category, we examine operational principles, implementation complexity, and adaptability to real-world phenomena such as partial shading and non-uniform temperature distribution. Through thorough comparative evaluation, the review uncovers existing research gaps, highlights ongoing challenges, and identifies promising directions for technological advancement. This work equips researchers and practitioners with an integrated knowledge base, fostering informed development and deployment of next-generation MPPT solutions for high-performance hybrid solar–thermal energy systems. Full article

Sunlight contains a wide spectrum of radiation from ultraviolet (UV) through visible light to infrared (IR). UV radiation plays a crucial role in skin damage, photoaging, and carcinogenesis, necessitating effective photoprotection strategies. The study evaluated the efficacy of protective lipsticks with different sun protection factor (SPF) values (10, 15, and 30) against UVA and infrared (IR) radiation. In this study, the directional-hemispherical reflectance (DHR) was measured across various spectral bands (335–380 nm, 400–540 nm, 700–1100 nm, and 1000–1700 nm) with SOC 410 Reflectometer (San Diego, CA, USA). Since the device used in this study did not cover the UVB range (290–320 nm), this study does not provide a direct assessment of SPF in its conventional sense. The measurements were taken at four time points up to 120 min after lipstick application. Results indicated that lipsticks with higher SPF values significantly altered skin reflectance in UVA and IR ranges, with SPF30 showing the lowest reflectance in the UVA range (335–380 nm), suggesting greater absorption of UVA radiation by the product and significantly higher reflectance in IR ranges compared to lower SPF lipsticks. Reflectance values generally increased over time post-application for key spectral bands. These findings demonstrate that SPF lipsticks provide variable attenuation of UVA and IR radiation, highlighting their role in comprehensive lip photoprotection. The data support the importance of SPF selection for optimized protection, especially against penetrating UVA and IR components of sunlight. Full article

Building upon recent advances in tactile sensing platforms such as OptoSkin, this research introduces an enhanced multi-touch sensor design that integrates Frustrated Total Internal Reflection (FTIR) technology with embedded Time-of-Flight (ToF) sensors for superior performance. Utilizing a 2 mm thick poly(methyl methacrylate) (PMMA) acrylic light guide with an area of 200 × 300 mm², the system employs the AMS TMF8828 ToF sensor both as the illumination source and the receiver. The selected PMMA, with a refractive index of 1.49, achieves an optical field of view (FoV) of approximately 32 degrees for the ToF receiver and enables signal propagation with minimal optical loss. Remarkably, a single ToF sensor can cover an active area of 195 cm² with a linear resolution of approximately 1 cm and an angular resolution of up to 3.5 degrees. This configuration demonstrates not only the feasibility of direct FTIR–ToF integration without the need for external cameras or electrode arrays but also highlights the potential for precise, scalable, and cost-effective multi-touch sensing over large surfaces. The proposed system offers robust performance even under direct sunlight conditions, setting a new benchmark for advanced tactile interface development across consumer electronics, industrial control, and robotic skin applications. Full article

The solar angle of incidence is the angle between the sunlight and the normal on the impact surface. The lower the angle of incidence, the more sun radiation the surface can absorb. There are several methods for calculating of this angle. Determining the geographical location of the equivalent surface is one of the lesser-known options. The equivalent surface is a tangential plane to the Earth that is parallel to a reference inclined surface. The geographical coordinates of the point of tangency are clearly determined by the slope and aspect. Since the equivalent surface is horizontal, basic solar geometry equations apply. Unlike the conventional equations commonly used today, they provide easily interpretable results. The sunrise and sunset times for an inclined surface and the time of an extreme incidence angle can be calculated directly. Approximate calculations are not necessary. In addition, the geographical approach allows for the hour angle to be determined, as well as the tilt for a given azimuth of the solar panel that is perpendicular to direct sunlight. This new procedure sets the time for regular changes in the horizontal direction of the sun-tracker. The renaissance of the geographical approach for calculating the temporal characteristics, which allows for the use of simple equations and the interpretation of their results, can also benefit agriculture, forestry, land management, botany, architecture, and other sectors and sciences. Full article

The wastewater treatment (WWT) industry is currently facing challenges imposed by the revised urban WWT directive, particularly in terms of nitrogen (N) and phosphorus (P) removal. This implies the need for mandatory tertiary treatment, for which microalgae cultivation shows great sustainability promise. This study investigated the impact of hydraulic retention time (HRT) on nutrient removal in open-air microalgae cultivation for tertiary WWT under winter conditions. Two pilot-scale semi-continuous raceway systems were operated with indigenous microalgae, natural sunlight, and no pH control. HRT values of 4, 5.5, and 7 days were tested, and N, P, and carbon (C) removal and recovery were measured. All conditions allowed nitrogen removal, complying with the revised urban WWT directive. Regarding P, only the 7-day HRT condition consistently complied with the directive’s lowest limit (<0.5 mg P·L⁻¹) in the treated water, while 5.5 and 4 days left up to 0.7 and 1.0 mg P·L⁻¹, respectively, in up to 25% of the samples. A stable microalgae consortium was established under variable light, pH, and dissolved oxygen conditions, albeit with variable biomass productivity. Elemental mass balances revealed that nutrients were mostly recovered in the produced biomass, particularly at high HRT, including effective CO₂ capture from the atmosphere. Full article

The use of hydrogel and biostimulants holds great potential for plants’ adaptation to stressful urban conditions, increasing their tolerance to drought stress. In this study, we investigated the plant performance and anatomical response of Petunia × hybrida hort. ex E. Wilm., cultivated under different substrate volumes and compositions, hydrogel amendments, and biostimulant treatments, as well as their interactions under drought stress. Namely, the plants were planted in pots with a substrate depth of 7 cm and 10 cm and cultivated under different combinations of organic (peat) and inorganic (perlite) substrates. Moreover, half of the plants were subjected to hydrogel and biostimulant treatments. Different watering intervals (24–96 h) were applied in combination with exposing the plants to direct sunlight for 8–10 h. The results showed that a larger substrate depth, along with hydrogel and biostimulant amendments in a mixture of perlite and peat, helps plants adapt to dry conditions when grown in shallow substrates, providing optimal water availability and thus contributing to the physiological adaptation of plants to water deficit. The study clearly demonstrates that substrate selection and irrigation frequency must be jointly optimized to ensure resilient urban greening. Hydrogels stand out as essential amendments, enabling significant water savings by extending irrigation intervals without compromising vascular growth or drought resilience. These water-efficient substrate strategies are vital for sustainable urban vegetation management, especially as cities face increasing environmental pressures and the imperative of climate adaptation, thereby supporting multiple Sustainable Development Goals. Full article

Daylighting plays a pivotal role in mosques, shaping their sacred atmosphere and enhancing the spiritual experience for worshippers. Beyond a mere architectural consideration, the integration of natural light into mosque design fundamentally influences the ambiance and functionality of these religious spaces. This study investigates the key factors that enhance daylight levels and visual comfort within prayer halls. It specifically evaluates illuminance levels, light distribution, and glare in four domed mosques located in Saudi Arabia. Field measurements were conducted beneath the domes of these prayer spaces, each featuring clerestory windows of varying forms and dimensions. Based on architectural specifications and material properties, daylight simulations and modeling were performed using the RADIANCE engine integrated with Grasshopper. The simulation results were validated against on-site illuminance measurements to ensure model accuracy and reliability. The primary objective was to assess whether the existing daylighting conditions comply with the recommended illuminance standards for reading and prayer, typically ranging from 150 to 500 lux. This study revealed that the illuminance levels in the central dome area exceeded the recommended values, reaching over 3000 lux. To improve daylight distribution, shading systems such as flat and curved shelves were added to the drum’s windows. This research concludes that the light shelves and vacuum double glazing significantly improved indoor daylight performance by preventing direct sunlight entry into the prayer hall and redirecting it towards the dome. This intervention successfully reduced excessive illuminance levels to a more optimal level of around 447–774 lux during the noon prayer period, ensuring a balanced and comfortable environment for worshippers. Full article

Microalgae, with their unparalleled capabilities for sunlight-driven growth, CO₂ fixation, and synthesis of diverse high-value compounds, represent sustainable cell factories for a circular bioeconomy. However, industrial deployment has been hindered by biological constraints and the inadequacy of conventional genetic tools. The advent of CRISPR-Cas systems initially provided precise gene editing via targeted DNA cleavage. This review argues that the true transformative potential lies in moving decisively beyond cutting to harness CRISPR as a versatile synthetic biology “Swiss Army Knife”. We synthesize the rapid evolution of CRISPR-derived tools—including transcriptional modulators (CRISPRa/i), epigenome editors, base/prime editors, multiplexed systems, and biosensor-integrated logic gates—and their revolutionary applications in microalgal engineering. These tools enable tunable gene expression, stable epigenetic reprogramming, DSB-free nucleotide-level precision editing, coordinated rewiring of complex metabolic networks, and dynamic, autonomous control in response to environmental cues. We critically evaluate their deployment to enhance photosynthesis, boost lipid/biofuel production, engineer high-value compound pathways (carotenoids, PUFAs, proteins), improve stress resilience, and optimize carbon utilization. Persistent challenges—species-specific tool optimization, delivery efficiency, genetic stability, scalability, and biosafety—are analyzed, alongside emerging solutions and future directions integrating AI, automation, and multi-omics. The strategic integration of this CRISPR toolkit unlocks the potential to engineer robust, high-productivity microalgal cell factories, finally realizing their promise as sustainable platforms for next-generation biomanufacturing. Full article

Traditional approaches in tunnel lighting have been directed toward the installation of appropriate luminaires in the intermediate and transitional sections with the simple objective of diminishing the effect of delayed visual accommodation during daylight hours. Such efforts run in parallel with the target of keeping the huge electrical use at the lowest level. Nevertheless, inadequate attention has been conceded to the interior areas, whose noticeable longitude in several instances, and subsequently the duration of occupancy of the users, can produce discomfort in the majority of the tunnel or underground passageway. It is in this region where the flicker effect presents a more remarkable impact. Although such effect is in fact uncomfortable, the strategies to eliminate it efficiently have not been developed in depth and the result is still deserving, especially in terms of sustainability. The reasons for this neglect, as well as some particularities and solutions, are exposed and discussed in the present article. Specifically, it is proved that the use of sunlight can be an adequate initiative and a positive energy input into design and retrofit tunnels capable of hampering or totally avoiding such unwanted effect. The innovative tunnel geometry explained in this manuscript is not cylindrical, and it is not based in revolution forms. Thus, it prevents the appearance of such unnerving visual effects, which compromise sustainability and endanger security. We are in the position to explain how the vector field generated by the normal to the points of the novel surface displayed remains non-parallel, ensuring appropriate diffusivity and, consequently, an even distribution of radiated energy. In the same manner, the notion of the tunnel is extended from a linear system to a veritable network of galleries, which can traverse in space bi- or even three-dimensionally. Accordingly, we will offer diverse instances of junctions and splices that further enhance the permeability into the terrain, augmenting the resilience capabilities of this disruptive technology. With all the former, a net reduction of costs reaching 25% can be easily expected with revenues. Full article

The marine habitats of the world’s oceans are being driven beyond their resilience. The ongoing biodiversity crisis is happening fast, within the lifespan of researchers trying to produce the information necessary for the conservation of habitats and marine ecosystems. Here, we report on the destruction of sciaphilic sessile communities and coralligenous concretions produced by the anchoring of a high-tonnage vessel inside a Marine Protected Area in Cyprus. The damage from the anchors and the chains consisted of the dislodgement of large boulders that were dragged or rolled over the seafloor, increasing the breakage and further dislodgement of more boulders; many were left upside-down. The biological communities that thrived in the dark environments below the boulders were directly exposed to high irradiance levels and went through a slow mortality and decaying process, most probably due to a combination of several deterioration agents, such as exposure to direct sunlight, predation, mucilage aggregates, and cyanobacterial blooms. The enforcement of regulatory measures for anchoring and transit in the MPA is necessary to prevent similar destruction. Given the extent of the irreversible damage to these sciaphilic communities, our study is, unfortunately, another environmental post-mortem contribution. Full article

Skin aging is mainly caused by external factors like sunlight, which triggers oxidative stress and chronic inflammation. Natural halogenated flavonoids have demonstrated anti-inflammatory properties. Inspired by the macroalgae-derived bromophenol BDDE, we investigated the anti-inflammatory potential of structure-related chalcones (1–7). Chalcones 1 and 7 showed the least cytotoxicity in keratinocyte and macrophage cells. Chalcones 1, 2, 4, and 5 exhibited the most significant anti-inflammatory effects in murine macrophages after lipopolysaccharide stimulation, with chalcone 1 having the lowest IC₅₀ value (≈0.58 μM). A SNAP assay confirmed that chalcones do not exert their effects through direct NO scavenging. Symmetrical bromine atoms and 3,4-dimethoxy groups on both aromatic rings improved the anti-inflammatory activity, indicating a relevant structure–activity relationship. Chalcones 1 and 2 were selected for study to clarify their mechanisms of action. At a concentration of 7.5 μM, chalcone 2 demonstrated a rapid and effective inhibitory action on the protein levels of inducible nitric oxide synthase (iNOS), while chalcone 1 exhibited a gradual inhibitory action. Moreover, chalcone 1 effectively activated the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway with around a 3.5-fold increase at the end of 24 h at 7.5 μM, highlighting its potential as a modulator of oxidative stress responses. These findings place chalcone 1 as a promising candidate for skincare products targeting inflammation and skin aging. Full article