Search Results (1,038)

Objective: To evaluate the concordance of automated 3D superimposition methods applied to digital models, with a focus on methods that consider stable palatal regions as geometric reference landmarks versus those that do not. Design and setting: This was a prospective, cross-sectional study using digital model files of patients undergoing orthodontic treatment in a university clinical setting. Participants: Sixty-one patients were prospectively enrolled and divided into three groups based on the type of orthodontic treatment they received: (20) non-extractive orthodontic treatment without intermaxillary elastics, (21) intermaxillary elastics, and (20) control subjects with no orthodontic movement. The inclusion criteria included the availability of complete pre- and post-treatment digital casts and the absence of significant craniofacial anomalies. Methods: Three superimposition methods were tested: (1) superimposition according to palate and palatal ridges, (2) best-fit superimposition of arches in occlusion, and (3) best-fit superimposition of individual arches. Discrepancies were identified by comparing the spatial positions derived from each method. Within three spatial axes, deviations of ±0.5 mm and ±1.15° were not considered significant. Bland–Altman plots were used to quantify palatal rugae based and non-based spatial differences between methods. Differences in the superimposition results between the three patient groups were evaluated using ANOVA tests. Results: Differences in spatial position between the superimposition methods often exceeded the acceptable range. The results were compared between the three patient groups with a statistical significance of α = 0.05. In the present study, the high reliability of the superimposition method based on the palate and palatal ridges was observed. Conclusion: Superimposition methods based on the palate and palatal rugae provide superior accuracy in determining treatment-related changes in upper arch digital models. These findings illustrate the need for appropriate selection of superimposition techniques based on the study objective of using clinically relevant techniques. Full article

The integration of artificial intelligence (AI) and advanced digital workflows is revolutionising full-arch implant dentistry, particularly for geriatric patients with edentulous and atrophic arches, for whom achieving both prosthetic passivity and optimal aesthetic outcomes is critical. This narrative review evaluates current challenges in intraoral scanning accuracy—such as scan distortion, angular deviation, and cross-arch misalignment—and presents how innovations like the Medit SmartX AI-guided workflow and the Scan Ladder system can significantly enhance precision in implant position registration. These technologies mitigate stitching errors by using real-time scan body recognition and auxiliary geometric references, yielding mean RMS trueness values as low as 11–13 µm, comparable to dedicated photogrammetry systems. AI-driven prosthetic design further aligns implant-supported restorations with facial symmetry and smile aesthetics, prioritising predictable midline and occlusal plane control. Early clinical data indicate that such tools can reduce prosthetic misfits to under 20 µm and lower complication rates related to passive fit, while shortening scan times by up to 30% compared to conventional workflows. This is especially valuable for elderly individuals who may not tolerate multiple lengthy adjustments. Additionally, emerging AI applications in design automation, scan validation, and patient-specific workflow adaptation continue to evolve, supporting more efficient and personalised digital prosthodontics. In summary, AI-enhanced scanning and prosthetic workflows do not merely meet functional demands but also elevate aesthetic standards in complex full-arch rehabilitations. The synergy of AI and digital dentistry presents a transformative opportunity to consistently deliver superior precision, passivity, and facial harmony for edentulous implant patients. Full article

Thermal management is an area of study in electronics focused on managing temperature to improve reliability and efficiency. When temperatures are too high, cooling systems are activated to prevent overheating, which can lead to reliability issues. To monitor the temperatures, sensors are often placed on-chip near hotspot locations. These sensors should be very small to allow them to be placed among compact, high-activity circuits. Often, they are connected to a central control circuit located far away from the hot spot locations where more area is available. This paper proposes sensing units for a novel temperature sensing architecture in the TSMC 180 nm process. This architecture functions by approximating the current through the sensing unit at a reference voltage, which is used to approximate the temperature in the digital back end using fitting functions. Sensing units are selected based on how well its temperature–current relationship can be modeled, sensing unit area, and power consumption. Many sensing units will be experimented with at different reference voltages. These temperature–current curves will be modeled with various fitting functions. The sensing unit selected is a diode-connected p-type MOSFET (Metal Oxide Semiconductor Field Effect Transistor) with a size of W = 400 nm, L = 180 nm. This sensing unit is exceptionally small compared to existing work because it does not rely on multiple devices at the sensing unit location to generate a PTAT or IPTAT signal like most work in this area. The temperature–current relationship of this device can also be modeled using a 2nd order polynomial, requiring a minimal number of trim temperatures. Its temperature error is small, and the power consumption is low. The range of currents for this sensing unit could be reasonably made on an IDAC. Full article

Orthognathic surgery (OS) is a complex procedure commonly used to treat dentofacial deformities (DFDs). These conditions, related to jaw position or size and often involving malocclusion, affect approximately 15% of the population. Due to the complexity of OS, accurate planning is essential. Digital assessment using computer-aided design (CAD) and computer-aided manufacturing (CAM) tools enhances surgical predictability. However, limitations in soft tissue simulation often require surgeon input to optimize aesthetic results and minimize surgical impact. This study aimed to evaluate the accuracy of virtual surgery planning (VSP) by analyzing the relationship between planning deviations and surgical satisfaction. A single-center, retrospective study was conducted on 16 patients who underwent OS at San Pedro University Hospital of La Rioja. VSP was based on CT scans using Dolphin Imaging software (v12.0, Patterson Dental, St. Paul, MN, USA) and surgeries were guided by VSP-designed occlusal splints. Outcomes were assessed using the Orthognathic Quality of Life (OQOL) questionnaire and deviations were measured through pre- and postoperative imaging. The results showed high satisfaction scores and good overall outcomes, despite moderate deviations from the virtual plan in many cases, particularly among Class II patients. A total of 63% of patients required VSP modifications due to poor soft tissue fitting, with 72% of these being Class II DFDs. Most deviations involved less maxillary advancement than planned, while maintaining optimal occlusion. This suggests that VSP may overestimate advancement needs, especially in Class II cases. No significant differences in satisfaction were observed between patients with low (<2 mm) and high (>2 mm) deviations. These findings support the use of VSP as a valuable planning tool for OS. However, surgeon experience remains essential, especially in managing soft tissue behavior. Improvements in soft tissue prediction are needed to enhance accuracy, particularly for Class II DFDs. Full article

This study presents a lightweight autoencoder-based approach for anomaly detection in digit recognition using federated learning on resource-constrained embedded devices. We implement and evaluate compact autoencoder models on the ESP32-CAM microcontroller, enabling both training and inference directly on the device using 32-bit floating-point arithmetic. The system is trained on a reduced MNIST dataset (1000 resized samples) and evaluated using EMNIST and MNIST-C for anomaly detection. Seven fully connected autoencoder architectures are first evaluated on a PC to explore the impact of model size and batch size on training time and anomaly detection performance. Selected models are then re-implemented in the C programming language and deployed on a single ESP32 device, achieving training times as short as 12 min, inference latency as low as 9 ms, and F1 scores of up to 0.87. Autoencoders are further tested on ten devices in a real-world federated learning experiment using Wi-Fi. We explore non-IID and IID data distribution scenarios: (1) digit-specialized devices and (2) partitioned datasets with varying content and anomaly types. The results show that small unmodified autoencoder models can be effectively trained and evaluated directly on low-power hardware. The best models achieve F1 scores of up to 0.87 in the standard IID setting and 0.86 in the extreme non-IID setting. Despite some clients being trained on corrupted datasets, federated aggregation proves resilient, maintaining high overall performance. The resource analysis shows that more than half of the models and all the training-related allocations fit entirely in internal RAM. These findings confirm the feasibility of local float32 training and collaborative anomaly detection on low-cost hardware, supporting scalable and privacy-preserving edge intelligence. Full article

Achieving accurate fit in implant-supported prostheses is critical for avoiding mechanical complications; however, the influence of digital manufacturing techniques and abutment designs on misfit and preload remains unclear. This study evaluated the impact of different manufacturing techniques (CAD-cast and 3D printing) and abutment connection types (engaging [E], non-engaging [NE]) on the misfit and preload of implant-supported cantilevered fixed dental prostheses (ICFDPs). Misfit was measured at six points using scanning electron microscopy, and preload was assessed via eight strain gauges placed buccally and lingually on four implants. Frameworks were torqued to 35 Ncm, retorqued after 10 min, and subjected to 200,000 cycles of loading. Mean preload values ranged from 173.4 ± 79.5 Ncm (PF) to 330 ± 253.2 Ncm (3DP). Preload trends varied depending on the abutment type and manufacturing technique, with the 3DP group showing higher preload in engaging (E) abutments, whereas the CAD-cast group showed the opposite pattern. Although preload values varied numerically, these differences were not statistically significant (p = 0.5). In terms of misfit, significant differences were observed between groups (p < 0.05), except between CAD-cast E (86.4 ± 17.8 μm) and 3DP E (84.1 ± 19.2 μm). Additionally, E and NE abutments showed significant differences in misfit within both CAD-cast and 3DP groups. Overall, 3DP frameworks showed superior fit over CAD-cast. These findings suggest that 3DP may offer improved clinical outcomes in terms of implant–abutment fit. Full article

Photobiomodulation (PBM) has been widely studied for its regenerative and anti-inflammatory properties. Its application, combined with biomaterials, is emerging as a promising strategy for promoting tissue regeneration. Considering the diversity of available evidence, this study conducted an integrative literature review, aiming to critically analyze and synthesize the effects of PBM on bone tissue, particularly its potential role as an adjunct in guided bone regeneration (GBR) procedures. To ensure an integrative approach, studies with different methodological designs were included, encompassing both preclinical and clinical research. The article search was performed in the digital databases PubMed/MEDLINE, Scopus, and Web of Science, using the following search terms: “Photobiomodulation therapy” AND “guided bone regeneration”. The search was conducted from November 2024 to January 2025. A total of 85 articles were found using the presented terms; after checking the results, 11 articles were selected for this study. The remaining articles were excluded because they did not fit the proposed inclusion and exclusion criteria. Studies to date have shown preclinical models that demonstrated increased bone-volume fraction and accelerating healing. Although it has exciting potential in bone regeneration, offering a non-invasive and promising approach to promote healing and repair of damaged bone tissue, the clinical application of PBM faces challenges, such as the lack of consensus on the ideal treatment parameters. Calcium phosphate ceramics were one of the most used biomaterials in the studied associations. Further well-designed studies are necessary to clarify the effectiveness, optimal parameters, and clinical relevance of PBM in bone regeneration, in order to strengthen the current evidence base and guide its potential future use in clinical practice. Full article

Opioid use disorder (OUD) is a chronic disease that remains difficult to treat, even with significant improvements in available medications. While current treatments work well for some, they often do not account for the unique needs of individual patients, leading to less-than-ideal results. Precision medicine offers a new path forward by tailoring treatments to fit each person’s genetic, psychological, and social needs. This review takes a close look at medications for OUD, including methadone, buprenorphine, and naltrexone, as well as long-acting options that may improve adherence and convenience. Beyond medications, the review highlights the importance of addressing mental health co-morbidities, trauma histories, and social factors like housing or support systems to create personalized care plans. The review also explores how emerging technologies, including artificial intelligence and digital health tools, can enhance how care is delivered. By identifying research gaps and challenges in implementing precision medicine into practice, this review emphasizes the potential to transform OUD treatment. A more individualized approach could improve outcomes, reduce relapse, and establish a new standard of care focused on recovery and patient well-being. Full article

Background/Objectives: Severe jawbone atrophy, particularly in elderly or medically compromised patients, presents a significant challenge for conventional implant placement. In cases where bone augmentation is not feasible, alternative techniques—such as short, narrow, tilted, and zygomatic implants—may be indicated for the rehabilitation of the atrophic jaw. Subperiosteal implants have re-emerged as a further viable alternative, especially with recent advancements in digital planning and custom fabrication. This study aims to evaluate the clinical outcomes and complications associated with subperiosteal implants through a literature review and a supporting case series, and to propose clinical preliminary guidelines for their use. Methods: Fourteen studies—including case reports, case series, retrospective studies, and systematic reviews—were analyzed to assess the effectiveness and risk profile of subperiosteal implants. Additionally, we present a case series of nine patients with advanced vertical and horizontal alveolar bone atrophy treated using custom-made, digitally-designed subperiosteal implants. Surgical techniques, prosthetic workflows, and complications were recorded and assessed. Results: Subperiosteal implants were found to be particularly suitable for patients with narrow alveolar crests and severe atrophy where traditional implants are contraindicated. Literature and case series data indicated favorable outcomes, with early complications such as soft tissue inflammation and prosthetic misfit being manageable. A low complication rate was recorded in our series, with digital workflows contributing to improved implant fit and reduced technical errors. Conclusions: Subperiosteal implants could offer an effective solution for complex atrophic cases, provided that patient selection, surgical precision, and prosthetic design are meticulously managed. Based on our findings, clinical recommendations are proposed to guide their application in contemporary practice. Full article

Design and use of wearable technology have grown exponentially, particularly in consumer products and service sectors, e.g., healthcare. However, there is a lack of a comprehensive understanding of wearable technology in consumer acceptance. This systematic review utilized a PRISMA on peer-reviewed articles published between 2014 and 2024 and collected on WoS, Scopus, and ScienceDirect. A total of 38 full-text articles were systematically reviewed and analyzed using bibliometric, thematic, and descriptive analysis to understand the technical functions of digital wearable products (DWPs) in consumer acceptance. The findings revealed four key functions: (i) wearable technology, (ii) appearance and design, (iii) biomimetic innovation, and (iv) security and privacy, found in eight types of DWPs, among them smartwatches, medical robotics, fitness devices, and wearable fashions, significantly predicted the customers’ acceptance moderated by the behavioral factors. The review also identified five key outcomes: health and fitness, enjoyment, social value, biomimicry, and market growth. The review proposed a comprehensive acceptance model that combines biomimetic principles and AI-driven features into the technical functions of the technical function model (TAM) while addressing security and privacy concerns. This approach contributes to the extended definition of TAM in wearable technology, offering new pathways for biomimetic research in smart devices and robotics. Full article

The extensive use of digital media among adolescents has raised concerns about its impact on emotional development and mental health. Understanding the psychological factors behind problematic digital media use is essential for effective prevention. This study examined whether the relationships between emotion regulation (negative and positive), compulsive use, cognitive preoccupation, and negative outcomes linked to digital media are consistent across sex and academic year. We used a cross-sectional design with 2357 adolescents (12–16 years old) from Compulsory Secondary Education. Participants completed validated self-report questionnaires assessing problematic digital media use, and associated consequences in four domains: internet, video games, social networking, and messaging. Four structural equation models (SEMs), each focused on a media type, tested whether these relationships remained stable across sex and academic year. All models showed good fit, and differences between groups were minimal, supporting valid comparisons. Results confirm that emotion regulation difficulties and problematic digital media use are consistently associated with negative outcomes in all adolescents, regardless of sex or academic level. Preventive strategies targeting emotional regulation and digital media behaviors may be broadly applied to reduce emotional and functional problems related to excessive media use. Full article

Objective: This article presents a step-by-step digital technique for fabricating a 3D-printed surgical guide to assist in alveoloplasty for immediate denture placement. Methods: The workflow integrates intraoral scanning, virtual tooth extraction, digital soft tissue modeling, and additive manufacturing to produce a customized guide with an occlusal window and buccal slot, along with a verification stent. Results: This method ensures precise ridge recontouring and verification, enhancing surgical predictability and prosthetic fit. Conclusions: Unlike traditional surgical guides based on conventional casts or manual fabrication, this fully digital approach offers a practical and replicable protocol that bridges digital planning and clinical execution. By improving surgical precision, reducing operative time, and ensuring optimal denture fit, this technique represents a significant advancement in guided pre-prosthetic surgery. Full article

Lublin University of Technology has been offering computer science studies for over 25 years. From the beginning, computer graphics have played a crucial role in the studies program. The Lab3D international efforts aimed at cultural heritage 3D digitization allowed for enriching the regular introductory course of computer graphics with elements of digitized real-life heritage, without disturbing the regular didactic process, nor the scope of the course learning outcomes. Such an activity was aimed at increasing the students’ engagement in learning and fits into the contemporary trend of including real-life cases in the course of teaching. The article presents the curriculum (including the changes introduced) together with an extensive analysis of the effect of such changes on students’ achievements. In total, 3042 grades of 1522 students from the years 2018–2024 underwent statistical analysis in order to support answering placed hypotheses related to keeping the effects positive or neutral. Luckily, students’ achievements did not worsen, and in fact significantly improved. To the authors’ knowledge, such an analysis in relation to computer graphics courses has never been published before. Full article

(1) Background: This study aimed to evaluate the marginal and internal fit of ceramic crowns produced by various digital methods using microcomputed tomography (MCT) imaging. (2) Methods: The ceramic crown preparation was performed on typodont maxillary first premolar. The crown preparation was scanned with an intraoral scanner and a model scanner, and cone-beam computed tomography (CBCT) scans were performed with three different voxel sizes (0.075 mm, 0.1 mm, and 0.15 mm). The space between the crown and prepared teeth was measured at nine different points in both coronal and sagittal sections. Three different digital model acquisition techniques, namely, intraoral scanning, model scanning, and CBCT-based standard tessellation language (STL) reconstruction, were compared in terms of marginal and internal fit. (3) Results: Quantitative analyses revealed that model scanners exhibited the lowest marginal and internal gap values, indicating superior fit compared to intraoral scanners and CBCT-based models. The highest gap values were observed in the CBCT group with a voxel size of 0.15 mm. Overall, crowns obtained from model scanners demonstrated the highest success rates in both marginal and internal fit. (4) Conclusions: In conclusion, this study highlights the critical role of digital scanning accuracy in achieving clinically acceptable prosthetic fits and emphasizes the need for continued technological advancement. Full article

This in vitro study aims to compare the trueness of digital impressions obtained using two intraoral scanners (IOS) and one photogrammetry device for full-arch implant-supported rehabilitations. According to the Caramês Classification I, three models were produced with Straumann implants arranged in different spatial distributions: Option A with six implants and Options B and C with four implants each. The three models were scanned using a 12-megapixel scanner to create digital master casts. For each reference model, 30 digital impressions were acquired: 10 with the 3Shape Trios 3 intraoral scanner, 10 with the Medit i500 intraoral scanner, and 10 with the PIC Dental photogrammetry device. Trueness was assessed through best-fit superimpositions between the digital master casts and the corresponding virtual models. The Shapiro–Wilk test was applied to assess the normality of the data distribution, and Levene’s test was used to evaluate the homogeneity of variances. The non-parametric Kruskal–Wallis test was employed to compare group differences, with post hoc adjustments made using the Bonferroni correction. A significance threshold of p = 0.05 was adopted for all statistical tests. Statistically significant differences were observed in the root mean square values among the three devices. The Medit i500 demonstrated the highest trueness, with a median (interquartile range) deviation of 24.45 (18.18) µm, whereas the PIC Dental exhibited the lowest trueness, with a median deviation of 49.45 (9.17) µm. Among the implant distribution, the Option C showed the best trueness, with a median deviation of 19.00 (27.83). Considering the results of this in vitro study, intraoral scanners demonstrated comparable trueness, whereas the photogrammetry-based system exhibited lower trueness values. Additionally, a smaller number of implants and reduced inter-implant distances were associated with improved trueness in digital impressions for full-arch implant rehabilitation. Full article